Showing 805 results

Collections
Item Industries -- Lumber Image
Advanced search options
Print preview View:

805 results with digital objects Show results with digital objects

TDS-010

ca. 1888. In this photograph from 1888, over a half-dozen ships crowd up to the dock of a lumber yard in Tacoma to take on lumber. The dock shown is probably the Tacoma Mill Company dock which was located on the waterfront by present day Old Tacoma, close to the Jack Hyde Park at the south end of Ruston Way. TPL-8608


Lumber industry--Tacoma--1880-1890; Lumberyards--Tacoma--1880-1890; Sailing ships--Tacoma--1880-1890

BOLAND G73.1-034

ca. 1918. The Puget Mill Company Hall in Port Gamble, circa 1918. The Company Hall was built in 1907 and designed by the Seattle architecture firm of Bebb and Mendel. It was located across Rainier Ave. from the General Store. The hall was intended to serve as a location for meetings, athletic events, socials and worship. The first floor contained offices for the doctor and dentist, a barber shop, telegraph office and Post Office. The second floor served as a meeting room, theater, movie house and dance hall. The building is still in use as a Post Office and rents office space. (Historylink.org) Boland #P-4


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); Post offices--Port Gamble; Community centers--Port Gamble;

BOLAND TPL-7058

ca. 1918. The home at the top right of the picture is the Walker-Ames house in Port Gamble, circa 1918. The structure on the left is unidentified. Port Gamble was the company town owned by the Puget Mill. A hierarchy developed in company housing, with the Superintendent receiving the largest house on the highest ground with the best view of the mill. The original Superintendent's home burned down in 1885 and was replaced by this Queen Anne structure built in 1888. Superintendent Edwin Ames was single at the home's completion and did not need such a large structure, so the home was occupied by master mechanic William Walker, brother of original general manager and shareholder Cyrus Walker, and his family. Ames married the Williams daughter and the two families shared the house until 1900. (TNT 12/31/1972, pg. B-5, Historylink.org) G73.1-032


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); Walker-Ames House (Port Gamble);

BOLAND G73.1-028

ca. 1918. The view down Rainier Ave. in Port Gamble, circa 1918. Port Gamble is one of the few surviving examples of a company town. It was built by the Puget Mill which, when it closed in 1995, was the oldest continuously operating mill in the nation. On the left is the mill office and general store, built in 1916. The store sold groceries, supplies and dry goods to the workers, as well as serving as their communication center by posting news of the world on their billboards. It is still in operation today, although the store now caters to tourists and a museum occupies the basement. Further down the street can be seen the water towers that supplied the town. (Historylink.org) Boland #22


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); General stores--Port Gamble;

BOLAND G73.1-036

ca. 1918. View of the Puget Mill, left at water line, with its piles of logs and the town of Port Gamble from the Port Gamble Bay, circa 1918. The mill operated from 1853 - 1995, making it the longest continuously operating mill in the nation. The town of Port Gamble was built by the company for the use of its workers. It is one of the few remaining examples of a lumber town. In 1966, the entire town was declared a national historic site. In the background of the photo can be seen, left to right, the spire of the St. Paul's Episcopal Church, the town's twin water towers, the Queen Anne Walker-Ames House, the mill company offices & store and the Community Hall. (Historylink.org) Boland #32


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

BOLAND G73.1-039

ca. 1918. Puget Mill company owned worker housing in Port Gamble, circa 1918. On the whole, Puget Mill workers were treated better than those at other lumber mills. They were paid a fair wage and housed in modern housing with all the conveniences. These homes cost about $587.59 each to build and a three bedroom version rented for around $7.00 a month. They were surround by pickett fences to protect them from wildlife and had a fireplace, electric lights, bathroom and a water closet. (Historylink.org)


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

BOLAND G73.1-027

ca. 1918. In 1853, Capt. William Talbot located the perfect site for a lumber mill, a sheltered bay five miles inside of the Hood Canal. He and partners Josiah Keller, Andrew Pope and Charles Foster built the Puget Mill in an area called "Teekalet" by the native Americans. In 1865, the town that the mill had erected for its workers was renamed Port Gamble. A company store was built in 1853, but it was replaced in 1916 by this office and general store built on Rainier Ave. As the centerpiece for the company town, the store sold groceries and household items needed by the workers and also served as the communication center, posting news of the world on its bulletin boards. The offices for the company were located upstairs. The building is still the General Store in Port Gamble, although it now caters to tourists, while a museum is now located on the lower level. (HistoryLink.org, Bremerton Sun 5/15/1953) Boland #23


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); General stores--Port Gamble;

BOLAND G73.1-037

ca. 1918. Junction of Rainier Ave and View Drive in Port Gamble, circa 1918. The building in the back was the company office and attached company store of Puget Mill. Puget Mill owned the entire town of Port Gamble and operated it for the benefit of their workers. In the foreground was the Community Hall, operated as a meeting venue for workers. It also contained the doctor, dentist and telegraph offices, a barber shop, Post Office and meeting room that could double as a theater and movie house. (Historylink.org) Boland #30


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); Post offices--Port Gamble; Community centers--Port Gamble; General stores--Port Gamble;

BOLAND G73.1-029

ca. 1918. Puget Mill Co. New England style "Saltbox" houses for company employees in Port Gamble, circa. 1918. Company officials insisted on a hierarchy in housing; managers had the best homes on the highest ground, skilled workers and their families came next, immigrant workers (Scandinavian, German, Swiss, Slovaks and Greeks) arriving in the 1880's were housed on the other side of the second growth forest west and south of the town in areas known as "New England" and "Murphy's Row," unmarried men lived in bunk houses and cabins on the spit near the mill and Chinese workers lived separately out of town, as did native Americans workers. The worker housing was surrounded by picket fences and had fireplaces, electric lights, bathrooms and a water closet. Rent for a three bedroom was about $7.00 a month. (Historylink.org) Boland #21


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

BOLAND-B2221

Log on shute. This log on a shute at an unidentified sawmill was photographed in mid-August of 1919. TPL-8085; G36.1-015


Logs;

BOLAND-B2240

An early logging truck, used by Wilson Logging Co. to bring in logs, was photographed in August of 1919. The early motor trucks offered an economical alternative to railway logging. Despite the cost of constructing roads, the trucks were a cheaper, faster and more practical way to move the logs. They were a common sight by the 1920s. They usually were underpowered, had an open cab and hard rubber tires, but they could go places that locomotives could not. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-032 (website for the Museum at Campbell River www.crmuseum.ca\exhibits)


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B2242

Although motorized logging trucks were becoming more common in the lumber industry, horses were still being used in August of 1919. A pair of horses are pictured above at an unidentified sawmill waiting patiently as planks are being loaded onto an open cart. Photograph ordered by the Wilson Logging Co. TPL-6636 G36.1-052


Logging industry--1910-1920; Wilson Logging Co.;

BOLAND-B2235

Side view of logging equipment on wheels belonging to the Wilson Logging Co. Photograph taken at unidentified location on August 23, 1919. TPL-9852 ; G36.1-032


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B2236

In August of 1919, a steam donkey mounted on a sled was photographed loaded on a truck for ease in transport to a logging site. Only the sled itself, built from huge logs, is clearly visible. The cable and winch on the donkey could be used to help load and unload it from the truck. This photograph was ordered by the Wilson Logging Co. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-082


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B2522

Extended view of St. Paul & Tacoma Lumber Co. planing mill and "monorail" as pictured in November of 1919. This may be the aerial tramway constructed to transport lumber from dry kilns to various other parts of the plant, replacing the old horse-and-truck system. St. Paul & Tacoma were putting in improvements to their sawmill on the Tideflats totaling nearly half-a-million dollars. Two new dry kilns were being built as well as an aerial tramway. The improvements were expected to reduce the cost of plant operation. St. Paul & Tacoma employed about 800 men at the time including a considerable night shift. G36.1-155 (T.Times 8-22-19, p. 12-article; TDL 7-19-20, p. 6-article)


Lumber industry--Tacoma--1910-1920; St. Paul & Tacoma Lumber Co. (Tacoma);

BOLAND-B2540

St. Paul & Tacoma Lumber Co. yard as photographed on November 24, 1919. As reported in the August 22, 1919, Tacoma Times newspaper, St. Paul & Tacoma Lumber was spending nearly $500,000 in improvements to its sawmill on the Tideflats. An aerial tramway was constructed to carry lumber from dry kilns to other parts of the plant. This would facilitate handling of lumber in the mill. The company was established in 1888 and provided steady employment for many residents for decades. It would merge with St. Regis Paper Co. in 1957. G36.1-083 (T.Times 8-22-1919, p. 12-article)


St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1910-1920;

BOLAND-B2731

Linco Log & Lumber Co.; Yard engine. The versatility of the steam powered railroad was responsible for early advances in logging. By replacing animals as beasts of burden, they made it possible to harvest timber in the most inaccessible areas. During the 1920's, large scale locomotive operations flourished in the northwest. The system consisted of a main line with spurs, trackage that could be shifted constantly to follow the timber. With the aid of geared engines, such as the Shay locomotive, built from 1884-1945 by the Lima Locomotive Co., they could go into most mountainous areas despite the grade. The logs could then be "yarded," brought from the field into areas for shipment. (Labbe & Goe, Railroads in the Woods) G75.1-074; TPL-818


Linco Log & Lumber Co. (Lindberg); Lumber industry--1920-1930; Lumber camps--1920-1930; Railroad locomotives--1920-1930;

BOLAND-B2716

These plain, but functional, wooden cottages were built for loggers employed by the Linco Log & Lumber Co. The cottages, as seen in March of 1920, were planted in dirt and built tightly side-by-side. Railroad tracks ran directly in front of the houses. These homes are believed to have been located in the Lewis County logging camp owned by Gustaf Lindberg. Linco had an office in Morton and a sawmill in Lindberg, four miles northeast. The company employed 75 men. Gustaf Lindberg, a prominent Scandinavian businessman of Tacoma, had founded the town of Lindberg in 1911 as the company town for Linco. Originally named Coal Canyon, the town was destroyed by fire in 1918 and subsequently rebuilt and renamed for Mr. Lindberg. The town's population remained small and never exceeded 200. Gustaf Lindberg lost ownership of the town and it underwent several name changes. Only ruins of the mill, brick homes and company store remain. G69.1-151 (www.drizzle.com/~jtenlen/walewis/townsal.html)


Dwellings--Lewis County; Linco Log & Lumber Co.; Railroad tracks--Lewis County; Lumber industry--Lewis County; Lumber camps--Lewis County;

BOLAND-B2721

This is a view of the Linco Log & Lumber Co. mill as seen in March of 1920. It was located in central Lewis County in the small logging community of Lindberg, just a few miles from Morton. Lindberg (formerly known as Coal Canyon) was founded by Tacoma businessman Gustaf Lindberg as the company town for Linco Log & Lumber. G36.1-081


Linco Log & Lumber Co.; Lumber industry--Lewis County; Lumber camps--Lewis County;

BOLAND-B2724

West Fork Logging Co.; Spar Pole. One of the ways to get logs from a remote location to the railroad car was the use of "High Lead" logging. It involved a main cable passed from the engine drum of a "donkey" through a block at the top of a tall spar tree (or pole.) A spar was a 150 to over 200 foot tree with the branches trimmed away and the top lopped off by a "high climber." The cable, powered by the steam donkey, could then be used to pull the logs to the dump. West Fork Logging was located in Mineral in Lewis County and had an office in the Tacoma Building. L.T. Murray was the president and H.E. Post was the secretary. G75.1-091


West Fork Logging Co. (Mineral); Lumber industry--1920-1930;

BOLAND-B2726

In March of 1920, a steam donkey on a sled was photographed for the West Fork Logging Co. The donkey was used for pulling logs in from the woods. In its simplest form, a donkey was just a steam engine with a drum and a steel cable. The winch was used to pull in logs or load them. In this case, the boiler is mounted, along with the drums, on a sled to make the unit portable. The steam donkey replaced the logging horses and oxen with the power of steam. It was faster, cheaper and more reliable than animals. The West Fork Logging Co. was located in Mineral, about 14 miles north of Morton in Lewis County. It was owned and operated by L.T. Murray. G75.1-093; TPL-9856 (Labbe & Goe, Railroads in the Woods)


West Fork Logging Co. (Mineral); Lumber industry--1920-1930; Steam donkeys; Donkey engines;

BOLAND-B2828

Side view of parked St. Paul & Tacoma Lumber Co. No. 1 truck filled with stacks of what may be plywood. This April, 1920, photograph may have been taken at the company's downtown Tacoma yard. As noted through the doorless truck, there was no driver at the wheel. G36.1-160


St. Paul & Tacoma Lumber Co. (Tacoma); Trucks--1920-1930;

BOLAND-B3218

St. Paul & Tacoma lumber yard. This November, 1920, progress photograph shows a fuel conveyor belt being constructed 24 feet above the ground at the St. Paul & Tacoma Lumber Co. Two 2 ton locomotive cranes are pictured lifting a 106 foot truss into place. The 641 foot long aerial belt will run from the mill to a point on the waterway directly across from the Consumers Central Heating Co. The conveyor belt will be used to transport the mill's waste wood, formed into logs. The fuel will be dumped on barges and carried across to the heating plant where it will be burned to supply heat to the city. The conveyor belt was all wood with the exception of the belt itself and the roller bearings. Parallel chord lattice was used for the entire length with the exception of street crossings where 106 foot span Belfast type lattice trusses were used. (TDL 1/9/1921, pg. 6) TPL-2047; G36.1-163


Lumber industry--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Belts & belting (Equipment); Fuel trade--Tacoma--1920-1930;

BOLAND-B3800

An unidentified mill in Tacoma's Tideflats was photographed by Marvin Boland in March of 1921. No workers are in sight. Piles of lumber are stacked throughout the yard. G36.1-043


Lumber industry--Tacoma--1920-1930; Mills--Tacoma;

BOLAND-B4566

On September 2, 1921, a steam powered cargo ship from the Luckenbach Line was docked at the Tidewater Mill, 3901 E. 11th St. The Tidewater had been opened in 1918 and was capable of producing 100,000 board feet a day. The majority of its products were shipped for export. The mill was built with a frontage of 750 feet of deep water, allowing the company to load several vessels at a time. The Luckenbach Steamship Co., 1850-1974, was one of the longest-lived and most successful U.S. shipping companies. It was started in 1850 by Lewis Luckenbach and grew to be a major force in intercoastal trade. (TDL 12/22/1918, pg. B-8; www.nationalflaggen.de) G49.1-074


Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Cargo ships--1920-1930; Logs;

BOLAND-B4557

The Tidewater Mill, on the east side of the Hylebos Waterway, was photographed on September 2, 1921 as the large steamship "Quinault" was being loaded with timber. The mill was built in 1918 on six acres of soggy land purchased from Gen. James Ashton. The land was filled in and the mill was built. It was one of only a handful on the Pacific Coast capable of producing the longest timbers. Tidewater could cut timbers up to 130 feet in length. The mill site's major advantage was 750 feet of deep water moorage, allowing the loading of several vessels at a time. (TDL 12/22/1918, pg. B-8) G49.1-071; TPL-9251


Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Cargo ships--1920-1930; Piers & wharves--Tacoma--1920-1930;

BOLAND-B4952

This elevated view of the Buffelen Lumber & Manufacturing Company, looking toward Tacoma across the Tideflats, was captured in November of 1921. The narrow bridge built on pilings is the old Hylebos Creek bridge. Located in the industrial Tideflats at Lincoln Ave. & Taylor Way, the sprawling Buffelen plant had been undergoing rapid expansion with the construction of a new warehouse in 1916 and a new power plant five years later. Other important improvements in 1921 included dry kilns and warehouses. Buffelen was organized in 1912 by John Buffelen primarily as a door manufacturer. In 1916 the company started to manufacture fir plywood. A small ad placed in the Tacoma Daily Ledger on 7-11-21 listed "fir doors, 3-ply panels, alder panels, sash, etc." as products manufactured by the firm which had offices in Minneapolis and Tacoma. (TDL- Ad 7-11-21, p. 7; Tacoma Sunday Ledger, 1-1-22, B-5-article)


Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Hylebos Bridge (Tacoma);

BOLAND-B5082

Construction on the new John Dower Lumber Company headquarters building at 733 East 11th Street began in late November, 1921. The company held an open house for the general public on March 11, 1922. The building, designed by Bullard & Mason, was one of the most unique lumber offices in the country. The finish on the exterior was designed to resemble a log house; the interior was finished in selected native woods, stained and varnished to bring out their natural colors. In 1922 the John Dower Lumber Company was one of the largest retail lumber companies in the United States. The St. Paul & Tacoma Lumber Company purchased the Dower yard and headquarters building in 1942. BU-11057


Lumber industry--Tacoma--1920-1930; John Dower Lumber Company (Tacoma); Building construction--Tacoma--1920-1930;

BOLAND-B5589

Elevated view of Tacoma's industrial tideflats as pictured on March 25, 1922. Visible are the sprawling St. Paul & Tacoma Lumber Co. and the Washington Parlor Furniture Co. at far left and the Pacific Lumber & Millwork Co. in center. They were at the foot or end of the 11th St. Bridge (now Murray Morgan Bridge). TPL-5731; G91.-017


St. Paul & Tacoma Lumber Co. (Tacoma); Washington Parlor Furniture Co. (Tacoma); Pacific Lumber & Millwork Co. (Tacoma);

BOLAND G49.1-085

On May 9, 1922, a steam cargo ship was pictured docked at the Tidewater Mill, where it was taking on a shipment of lumber. The Mill was located on the east side of the Hylebos Waterway, near the end of 11th St. It was opened in 1918 and had a capacity of 100,000 logs a day. The mill was built on wetlands which were filled for the construction of the mill. Its greatest advantage was its frontage on 750 feet of deep water, allowing the loading of several vessels at a time. (TDL 12/22/1918, Pg. B-8)


Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Cargo ships--1920-1930;

Results 1 to 30 of 805