A truck loaded with logs breaks a path through the Idaho snow in early March of 1969. The logs are believed to be headed for a Potlatch Forests, Inc., mill probably in Lewiston. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Logs; Lumber industry--Idaho--1960-1970; Trucks--Idaho; Snow--Idaho;

A variety of photographs were taken of the interior and exterior of the Potlatch Forests, Inc., plant located in Lewiston, Idaho, in mid-October of 1969. The wood products stacked above inside an open container have been identified by a reader as presto-logs (Pres-to-Logs) designed by Potlatch in 1930 as a way to use sawdust from the lumber mill. Pres-to-Logs were a slow-burning, almost smokeless fuel which were ideal for fireplaces both in the home or on railcars. They were made using a process which involved extreme heat, high pressure and moisture. By the looks of the cobwebby substance draped over the particular logs in the photograph, they may have been stored there awhile and may have been the home to many spiders. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (Additional information provided by a reader and company history by www.fundinguniverse.com/company-histories/Potlatch-Corporation-Company-History)

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970;

Scenes from Potlatch Forests, Inc. This worker in Potlatch Forests, Inc.'s Lewiston, Idaho plant, is manning the wheel controlling a large roll of kraft pulp. This photograph was typical of the many taken of day-to-day operations at the Idaho facility in mid-October of 1969. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970; Industrial facilities--Idaho;

October, 1969, scenes from Idaho plant. Two employees of Potlatch Forests, Inc., examine under bright light large sheets of their company's kraft pulp. Faint ripples can be seen on the sheets. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970; Industrial facilities--Idaho;

Scenes from Potlatch Forests' Idaho plant. A worker at the big Lewiston, Idaho plant of Potlatch Forests, Inc., examines a sample of paper towels manufactured and sold and packaged to order for grocery stores and drug store chains. The tissue products were privately labeled and included bathroom tissue, facial tissues, towels and napkins. These consumer products were sold within the United States. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (www.potlatchcorp.com)

Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970;

October, 1969, scenes from Potlatch Forests' Idaho plant. A Towmotor forklift driver carefully maneuvers his unit to grasp a large roll of bleached kraft market pulp from similar stacked towers. The forest of kraft pulp rolls stand many feet higher than the seated driver. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970; Hoisting machinery; Industrial facilities--Idaho;

1976 Richards color stock footage. Log dumps in foreground; log piles on land. Kaiser Domes that hold alumina in background.

Logs; Storage tanks--Tacoma; Kaiser Aluminum & Chemical Corp. (Tacoma);

On the evening of June 15, 1942, the sawmill at the Henry Mill & Timber Co. was fully engulfed in flames. The fire department managed to save the planer plant, warehouse and offices, but the sawmill was a complete loss. The owners swore to rebuild immediately. However, after the fire, the company's business began to consist mostly of prefabricated items for the military. (T. Times 6/16/1942, pg. 1)

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Fires--Tacoma--1940-1950;

On April 4, 1942, after several aborted attempts, the Northwest Hauling Company successfully raised a 150 foot smokestack at the new plant of Puget Sound Plywood located at 230 E. "F" Street. The huge steel stack weighed 13 tons and was constructed by Seattle Boiler Company. Once lifted into place on its 30 foot tall base, it jutted 180 feet into the air over the tideflats. The plant was expected to be fully operational in 30 days. The erection of the stack required several days of planning by the hauling company owned by Dan Cooney. Puget Sound Plywood, the first cooperative plywood plant in Tacoma, opened June 1, 1942. It had 298 members who each contributed $1,000 and received the same hourly pay and percentage of the company's profits. It was built on 3 1/2 acres at the mouth of the City Waterway. (T. Times 4/6/1942, pg. 2)

Puget Sound Plywood, Inc. (Tacoma); Plywood; Lumber industry--Tacoma--1940-1950; Northwest Hauling Co. (Tacoma); Smokestacks; Cooperatives--Tacoma;

Ben Cheney and an unidentified woman sit at the back of a convertible on the dock next to the "Oregon." Richard Studio notes state that this picture was taken in Oregon. The cargo ship was built by Seattle-Tacoma Shipbuilding Corp. in Tacoma and was launched as the Cape Cleare.

Cheney Lumber Co. (Tacoma); Cheney, Ben B., 1905-1971; Cargo ships; Convertible automobiles--1940-1950;

Henry Mill, construction of trusses. Henry Mill was located at 3001 No. Starr, the former site of the old Tacoma Mill Co. The mill was operated by John F. Buchanan, pres., and William F. Buchanan, VP. During the second World War, they became active in lumber prefabrication. Large buildings, such as hangars, were prebuilt in pieces and reassembled on arrival at their destination.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill shots of hardware and quantity. Henry Mill & Timber Co. was a leader in the pre-fabricated lumber field. Pre-fabricated lumber helped speed the war effort in filling their government orders. Henry Mill also had their products throughout Tacoma housing projects. Exterior view of Henry Mill & Timber Co. plant.

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Prefabricated buildings--Tacoma; Henry Mill & Timber Co. (Tacoma);

St. Paul & Tacoma Lumber Co. had three logging camps located near Tacoma. St. Paul and Tacoma lumber company provides enough lumber and plywood to build 48 homes per day. They were one of the largest lumber companies in the Pacific Northwest. View of cleared land near one of the logging camps.

Lumber industry--Tacoma--1940-1950; Cutover lands; Logs; St. Paul & Tacoma Lumber Co. (Tacoma);

A. H. Cox & Co. at St. Paul & Tacoma Lumber Co. logging operation at Puyallup. St. Paul & Tacoma Lumber has invested extra sums of money on researching preventative measures for protecting forests from fires and wildlife. View of high line duplex skidder and loader. This machine requires a crew of 14 men and has the capacity of 15 cars of logs in an 8 hour period. TPL-6378

Lumber industry--Tacoma--1940-1950; Machinery; Woodcutting--Puyallup; St. Paul & Tacoma Lumber Co. (Tacoma);

Douglas Fir Plywood Association. A man is marking three large logs with a tool. They are on a raised platform, possibly a railroad car.

Logs; Lumber industry--Tacoma--1940-1950;

ca. 1946. A section of Douglas Fir tree trunk almost 14 feet in diameter arrives at the Northwest Door Co. plywood plant. Anthony A. "Spike" Maras perches on top of the trunk, which is marked with a white 14 and sits on a logging truck. The "14" is the measurement of the diameter of the tree. On the ground, Fred R. Davis, left, and Percy J. Maras crane their necks to see the top of the trunk. The men are the owners of the Davis & Maras Co., which was hired by Northwest Door to fell the tree. The giant trunk will not be made into plywood, but will be put on display. (identification supplied by Anthony "Spike" Maras)

Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950; Logging trucks--1940-1950; Maras, Anthony A.; Davis, Fred R.; Maras, Percy J.;

St. Paul & Tacoma Lumber Company. Railroad cars have brought logs to the log pond in this August of 1946 photograph. The railroad cars have false bottoms that can be lifted by the crane allowing the logs to plunge into the log pond.

Logs; Lumber industry--Tacoma--1940-1950; St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;

A workman at the Northwest Door Company kneels on the top of a huge section of an old growth douglas fir. He is using a long buck saw to slice off a section from the piece of wood. This 12ft 9 inch diameter slice of trunk will be on display at the door company. The tree was cut on the company's holdings west of Packwood.

Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Logs; Tree stumps--Tacoma--1940-1950;

Renton housing project showing use of "Cheney Studding". Ordered by Cheney Lumber Company. [Also dated 06-09-1942]

Cheney Lumber Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Housing developments--Renton;

Renton housing project showing the use of standardized Cheney studding. Construction is the Highlands Development, east of I-405. Photographs made for Cheney Lumber Co.

Cheney Lumber Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Housing developments--Renton; Construction--Renton;

Renton housing project showing use of "Cheney Studding". Ordered by Cheney Lumber Company. [Also dated 06-09-1942]

Cheney Lumber Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Housing developments--Renton; Construction--Renton;

Kulien & Wollander home in Lakeside project for D.F.P.A. Plywood was used for both interior and exterior residential purposes. It was used for prefabricated housing for war workers. Plywood was known for its strength and flexibility in construction. It was often used for concrete molds. (TNT, 2/1942)

Plywood; Kulien & Wollander Co. (Lakewood); Douglas Fir Plywood Association (Tacoma); Houses--1940-1950;

Buffelen Lumber and Manufacturing Company.

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950;

Henry Mill, construction of prefabricated trusses. During the war, Henry Mill was active in lumber prefabrication.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill was located at the foot of No. Starr St., right at the waterfront. It was on the 28 acre site of the old Tacoma MIll Co. During the war, Henry Mill specialized in prefabricated elements for the military. The company was taken over in 1945 by Tacoma Lumber Fabricating Co. The photograph shows lots of stored lumber as well as a couple of cranes.

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Henry Mill and Timber Company. Burner and lumber storage dock along the Tacoma waterfront. Henry Mill began operations at this site in 1925. It was formerly the site of the Old Tacoma Mill Co. TPL-8381

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Henry Mill and Timber Company. Lumber storage dock along the Tacoma waterfront. Began operations at this site in 1925.

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

St. Regis mills can be found in 23 locations across the United States, they have six plants in Canada, and one in Belgium, Brazil and Argentina. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; logs have been loaded onto trucks and will be transported to the Tacoma plant.

Loggers--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; Trucks--Mineral; St. Regis Paper Co. (Mineral);

Modular Structures, Incorporated was a structural engineering business firm, they worked on residential and commercial contracts. The company officers were: Win E. Wilson, President; James E. Dallas, Vice-President; and Mabel Wilson, Secretary-Treasurer. View of unidentified laborers working on prefabricated plywood panels that will be used for prefabricated grain bins; photo ordered by Douglas Fir Plywood Association.

Plywood; Laborers--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Construction industry--Tacoma--1940-1950; Douglas Fir Plywood Association (Tacoma)--Products; Modular Structures, Inc. (Tacoma);

Frozen food lockers were manufactured by St. Paul and Tacoma Lumber Company at Coast Sash and Door Company using plaster-faced plywood. A workman inspects the fit of the door in its sash. Coast Sash and Door opened at this location on the Tacoma tideflats in 1924. Ordered by Douglas Fir Plywood Association, John Ritchie.

Plywood; Douglas Fir Plywood Association (Tacoma); Coast Sash & Door Co. (Tacoma); St. Paul & Tacoma Lumber Co. (Tacoma); Doors & doorways--Tacoma; Lumber industry--Tacoma--1950-1960;