ca. 1918. The Puget Mill Company Hall in Port Gamble, circa 1918. The Company Hall was built in 1907 and designed by the Seattle architecture firm of Bebb and Mendel. It was located across Rainier Ave. from the General Store. The hall was intended to serve as a location for meetings, athletic events, socials and worship. The first floor contained offices for the doctor and dentist, a barber shop, telegraph office and Post Office. The second floor served as a meeting room, theater, movie house and dance hall. The building is still in use as a Post Office and rents office space. (Historylink.org) Boland #P-4

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); Post offices--Port Gamble; Community centers--Port Gamble;

ca. 1918. The home at the top right of the picture is the Walker-Ames house in Port Gamble, circa 1918. The structure on the left is unidentified. Port Gamble was the company town owned by the Puget Mill. A hierarchy developed in company housing, with the Superintendent receiving the largest house on the highest ground with the best view of the mill. The original Superintendent's home burned down in 1885 and was replaced by this Queen Anne structure built in 1888. Superintendent Edwin Ames was single at the home's completion and did not need such a large structure, so the home was occupied by master mechanic William Walker, brother of original general manager and shareholder Cyrus Walker, and his family. Ames married the Williams daughter and the two families shared the house until 1900. (TNT 12/31/1972, pg. B-5, Historylink.org) G73.1-032

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); Walker-Ames House (Port Gamble);

ca. 1918. The view down Rainier Ave. in Port Gamble, circa 1918. Port Gamble is one of the few surviving examples of a company town. It was built by the Puget Mill which, when it closed in 1995, was the oldest continuously operating mill in the nation. On the left is the mill office and general store, built in 1916. The store sold groceries, supplies and dry goods to the workers, as well as serving as their communication center by posting news of the world on their billboards. It is still in operation today, although the store now caters to tourists and a museum occupies the basement. Further down the street can be seen the water towers that supplied the town. (Historylink.org) Boland #22

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); General stores--Port Gamble;

ca. 1918. View of the Puget Mill, left at water line, with its piles of logs and the town of Port Gamble from the Port Gamble Bay, circa 1918. The mill operated from 1853 - 1995, making it the longest continuously operating mill in the nation. The town of Port Gamble was built by the company for the use of its workers. It is one of the few remaining examples of a lumber town. In 1966, the entire town was declared a national historic site. In the background of the photo can be seen, left to right, the spire of the St. Paul's Episcopal Church, the town's twin water towers, the Queen Anne Walker-Ames House, the mill company offices & store and the Community Hall. (Historylink.org) Boland #32

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

ca. 1918. Puget Mill company owned worker housing in Port Gamble, circa 1918. On the whole, Puget Mill workers were treated better than those at other lumber mills. They were paid a fair wage and housed in modern housing with all the conveniences. These homes cost about $587.59 each to build and a three bedroom version rented for around $7.00 a month. They were surround by pickett fences to protect them from wildlife and had a fireplace, electric lights, bathroom and a water closet. (Historylink.org)

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

ca. 1918. In 1853, Capt. William Talbot located the perfect site for a lumber mill, a sheltered bay five miles inside of the Hood Canal. He and partners Josiah Keller, Andrew Pope and Charles Foster built the Puget Mill in an area called "Teekalet" by the native Americans. In 1865, the town that the mill had erected for its workers was renamed Port Gamble. A company store was built in 1853, but it was replaced in 1916 by this office and general store built on Rainier Ave. As the centerpiece for the company town, the store sold groceries and household items needed by the workers and also served as the communication center, posting news of the world on its bulletin boards. The offices for the company were located upstairs. The building is still the General Store in Port Gamble, although it now caters to tourists, while a museum is now located on the lower level. (HistoryLink.org, Bremerton Sun 5/15/1953) Boland #23

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); General stores--Port Gamble;

ca. 1918. Junction of Rainier Ave and View Drive in Port Gamble, circa 1918. The building in the back was the company office and attached company store of Puget Mill. Puget Mill owned the entire town of Port Gamble and operated it for the benefit of their workers. In the foreground was the Community Hall, operated as a meeting venue for workers. It also contained the doctor, dentist and telegraph offices, a barber shop, Post Office and meeting room that could double as a theater and movie house. (Historylink.org) Boland #30

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); Post offices--Port Gamble; Community centers--Port Gamble; General stores--Port Gamble;

ca. 1918. Puget Mill Co. New England style "Saltbox" houses for company employees in Port Gamble, circa. 1918. Company officials insisted on a hierarchy in housing; managers had the best homes on the highest ground, skilled workers and their families came next, immigrant workers (Scandinavian, German, Swiss, Slovaks and Greeks) arriving in the 1880's were housed on the other side of the second growth forest west and south of the town in areas known as "New England" and "Murphy's Row," unmarried men lived in bunk houses and cabins on the spit near the mill and Chinese workers lived separately out of town, as did native Americans workers. The worker housing was surrounded by picket fences and had fireplaces, electric lights, bathrooms and a water closet. Rent for a three bedroom was about $7.00 a month. (Historylink.org) Boland #21

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

Employees of Star Iron Works posed aboard their patriotic "float" for the 1918 Labor Day Parade. The float was stopped just south of the Union Station at 1717 Pacific Avenue. They were part of the nearly 20,000 representatives of organized labor who marched in the largest Labor Day parade the city of Tacoma had seen to that date. There were eight large divisions of labor, 12 bands including two from Camp Lewis, floats and pretty girls on display. Working men and women, from boiler makers to cigar makers to cooks, all marched in countless lines during the hour-long parade which ended at Wright Park. Industries were booming during the war years as noted by the increase of shipworkers marching in the parade - 4,700 compared to the 47 the year before. G38.1-041 (TDL 9-2-18, p. 1-article; TDL 9-3-18, p. 1-article; TNT 9-2-18, p. 1-article)

Star Iron & Steel Co. (Tacoma); Parades & processions--Tacoma--1910-1920; Floats (Parades)--Tacoma--1910-1920;

Daily operations at Todd Shipyards as photographed in March of 1919. Todd Dry Dock & Construction Corporation had bought land along Commencement Bay in 1917 and built a modern shipyard. They delivered eleven cargo ships in 1919. TPL-1526; G37.1-176 (www.shipbuildinghistory.com/history/shipyards/2large/inactive/toddtacoma.htm--list of ships built)

Todd Dry Dock & Construction Corp. (Tacoma); Boat & ship industry--Tacoma--1910-1920;

Exterior 1919 view of Babare Brothers Shipyards. The plant, located on five acres in Old Town, was one of Tacoma's pioneer shipbuilding facilities. The Babare Brothers consisted of George and Nick Babare, whose Croatian-born father Stephen was a master shipbuilder. Employing some 300 workers in 1918, the plant was busy building large wooden steamers for the government. The yard contained two building slips, each served by gantry cranes, a modern sawmill and in-demand machine shop. Prior to the Babare Brothers entry into government work, they built cannery tenders and purse seine boats for fishermen and canneries in Oregon, Washington and Alaska. They were prepared to return to this type of work after the government's demand for ships decreased. On November 30, 1919, the Tacoma Daily Ledger reported that the Babare Brothers had obtained a site along the Hylebos Waterway. (Pacific Marine Review, August, 1918, p. 90-article) G37.1-180

Babare Brothers Shipbuilding (Tacoma); Boat & ship industry--Tacoma--1910-1920;

The dining room staff at Todd Shipyards on the tideflats posed for a group portrait in February of 1919 in front of what is believed to be the shipyard's dining hall. The unidentified woman in dark dress and white collar in back row may be the supervisor. The massive $1,000,000 shipbuilding plant, covering a 30-block area located around 100 Alexander Avenue, required many workers in all categories. Known formally as the Todd Dry Dock & Construction Corp., the shipyard provided a company hotel with room for over 600 men, a large dining facility, and began building modest homes for sale to shipyard employees in 1919. G33.1-132

Todd Dry Dock & Construction Corp. (Tacoma); Employee eating facilities--Tacoma; Restaurant workers--Tacoma--1910-1920;

Interior of a section of the Tacoma Smelter taken in March of 1919. This was the copper refinery. Copper anodes from the smelter were inserted between copper cathodes in a copper-sulfuric acid bath. Copper was transferred from the anode to the cathode. The two raised frameworks in the photograph's middle were stands for "slapping copper starter sheets" before they were inserted into the bath as cathodes. The American Smelting & Refining Co., better known by its acronym, ASARCO, was a major employer in Ruston for nearly a hundred years. G32.1-023 (Additional information provided by a reader)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma; Industrial facilities--Tacoma;

Jacona at dock. The 7,600-ton freighter "Jacona" had been launched on November 20, 1918 by Todd Dry Dock & Construction Co. and delivered to her owners on May 9, 1919. Later in 1930 she was converted into a floating power generation station. TPL-1677

Boat & ship industry--Tacoma--1910-1920; Cargo ships--Tacoma--1910-1920;

Log on shute. This log on a shute at an unidentified sawmill was photographed in mid-August of 1919. TPL-8085; G36.1-015

Logs;

An early logging truck, used by Wilson Logging Co. to bring in logs, was photographed in August of 1919. The early motor trucks offered an economical alternative to railway logging. Despite the cost of constructing roads, the trucks were a cheaper, faster and more practical way to move the logs. They were a common sight by the 1920s. They usually were underpowered, had an open cab and hard rubber tires, but they could go places that locomotives could not. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-032 (website for the Museum at Campbell River www.crmuseum.ca\exhibits)

Lumber industry--1910-1920; Wilson Logging Co.;

Although motorized logging trucks were becoming more common in the lumber industry, horses were still being used in August of 1919. A pair of horses are pictured above at an unidentified sawmill waiting patiently as planks are being loaded onto an open cart. Photograph ordered by the Wilson Logging Co. TPL-6636 G36.1-052

Logging industry--1910-1920; Wilson Logging Co.;

Side view of logging equipment on wheels belonging to the Wilson Logging Co. Photograph taken at unidentified location on August 23, 1919. TPL-9852 ; G36.1-032

Lumber industry--1910-1920; Wilson Logging Co.;

In August of 1919, a steam donkey mounted on a sled was photographed loaded on a truck for ease in transport to a logging site. Only the sled itself, built from huge logs, is clearly visible. The cable and winch on the donkey could be used to help load and unload it from the truck. This photograph was ordered by the Wilson Logging Co. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-082

Lumber industry--1910-1920; Wilson Logging Co.;

Extended view of St. Paul & Tacoma Lumber Co. planing mill and "monorail" as pictured in November of 1919. This may be the aerial tramway constructed to transport lumber from dry kilns to various other parts of the plant, replacing the old horse-and-truck system. St. Paul & Tacoma were putting in improvements to their sawmill on the Tideflats totaling nearly half-a-million dollars. Two new dry kilns were being built as well as an aerial tramway. The improvements were expected to reduce the cost of plant operation. St. Paul & Tacoma employed about 800 men at the time including a considerable night shift. G36.1-155 (T.Times 8-22-19, p. 12-article; TDL 7-19-20, p. 6-article)

Lumber industry--Tacoma--1910-1920; St. Paul & Tacoma Lumber Co. (Tacoma);

ca. 1919. Columbia Breweries. The early day bottling machine was a tedious, hand-operated contraption. A production of 500,000 bottles per year was regarded as somewhat stupendous. Wide belts connected with drive shafts located at the ceiling level operate these early assembly-line machines. Ordered by Columbia Breweries in 1951. (TNT, 1/7/1952) (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4392). TPL-9628. Previously cataloged as WO58568-2.

Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Machinery; Assembly-line methods--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma)--People; Bottles;

St. Paul & Tacoma Lumber Co. yard as photographed on November 24, 1919. As reported in the August 22, 1919, Tacoma Times newspaper, St. Paul & Tacoma Lumber was spending nearly $500,000 in improvements to its sawmill on the Tideflats. An aerial tramway was constructed to carry lumber from dry kilns to other parts of the plant. This would facilitate handling of lumber in the mill. The company was established in 1888 and provided steady employment for many residents for decades. It would merge with St. Regis Paper Co. in 1957. G36.1-083 (T.Times 8-22-1919, p. 12-article)

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1910-1920;

The Columbia Brewing Company was started in 1900 by three men with a capitalization of $50,000. William Kiltz was sales manager and Emile Kliese was owner, president and brewmaster. Their facilities, typical of the era, were primitive, but they were determined to make the finest beer possible. During the early stages of beer making malted barley was milled and the malt grain was mixed with pure water in a large wooden tub called a "mash tun". This "malt mash" was stired by hand with a long wooden paddle and then channeled or piped into large copper brew kettles where the "wort" was boiled with hops. This view shows the laboratory and mixing room in the bottling department of Columbia Brewing Company. The brewery was located in a newly built facility at 2120-32 South C Street. Copy ordered by Columbia Breweries, Inc., in 1951. (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4391) Another copy of this photograph was ordered under number C87485-42. TPL-7956. Previously cataloged as WO58568-1.

Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People;

The early racking room at Columbia Brewing Company, where draft beer was barreled, was a matter of wooden barrels, cumbersome hand maneuvering methods and inexact controls. A thick layer of frost can be seen on the pipes above the workmen's heads. They are wearing heavy clothes to work in the chilled cellars. Ordered by Columbia Breweries in 1951. (TNT, 1/7/1952) (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4394). Previously cataloged as WO58568-3.

Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Barrels--Tacoma; Columbia Brewing Co. (Tacoma)--People;

On May 9, 1922, a steam cargo ship was pictured docked at the Tidewater Mill, where it was taking on a shipment of lumber. The Mill was located on the east side of the Hylebos Waterway, near the end of 11th St. It was opened in 1918 and had a capacity of 100,000 logs a day. The mill was built on wetlands which were filled for the construction of the mill. Its greatest advantage was its frontage on 750 feet of deep water, allowing the loading of several vessels at a time. (TDL 12/22/1918, Pg. B-8)

Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Cargo ships--1920-1930;

Serious motion picture production came to Tacoma- Pierce County near the end of 1924. The administration building, in front, and main building of the H.C. Weaver Productions, Inc. motion picture studio were nearing completion on December 4, 1924. Located on 5.5 acres at the end of Sixth Avenue near Titlow Beach, the H.C. Weaver Productions, Inc., studio had the northwest's largest floor space without supporting pillars. Construction began in early October, 1924, and was completed in late December of that year at a cost of $50,000. The administration bldg. contained executive offices, a projection room, 15 star dressing rooms and dressing rooms for extras. Furnace rooms were built at each end of the main building to make the stage evenly heated. There were no windows in the main building; the studio decided to make use of artificial lightning when filming inside. An elaborate formal dedication, open to the public, was held on December 14, 1924. (TDL 11-9-24, E-8, 12-14-24, B-1) Boland B11464

H.C. Weaver Productions, Inc. (Tacoma); Motion picture studios--Tacoma; Building construction--Tacoma--1920-1930;

H.C. Weaver Productions motion picture studio under construction on December 4, 1924. One car is parked on the grounds of the construction site; studio was located on 5.5 acres near Titlow Beach. The formal dedication of the first motion picture studio in the Northwest was scheduled for December 14th, ten days after this photograph was taken. The $50,000 studio, constructed by the firm of Albertson, Cornell Bros. & Walsh, was not yet completed. Scaffolding is still in place on the walls of the main building which would be built sans windows. The lower structure in front of the main building would be the administration unit, containing executive offices, projection room, dressing rooms for the stars and extras. The studio would be 105 ft by 180 ft with a 52 foot ceiling. It would have the largest floor in the Northwest without supporting pillars. Only two larger floors were available, both in Hollywood. Weaver was one of a handful of independent studios capable of handling all aspects of film production, including developing and titling. The studio closed after only four years of operation in 1928; the building was converted into a dance hall in 1932 but was destroyed by fire on August 24, 1932. (TDL 11-9-24, E-8, 12-14-24, B-1) Boland-B11465, BU-13758, TPL-8181

H.C. Weaver Productions, Inc. (Tacoma); Motion picture studios--Tacoma; Building construction--Tacoma--1920-1930;

Chicago, Milwaukee and St. Paul Railroad, Engine #10210. The snub nosed flat end of the "Box Cab" electric locomotive was a distinctive feature of the EF1 models. The EF 1s were manufactured by American Locomotive Co. (ALCO) and General Electric Manufacturing Co. (GE). The engines operated on direct current. Photograph ordered by Mr. Abel. Boland B8568

Railroad locomotives--Tacoma; Railroad cars--Tacoma; Railroads--Tacoma; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma);

On May 29, 1924, many interested Tacomans viewed the old wood burning locomotive #1, also known as "William Crookes," on display at Union Station. The train originally operated on the St. Paul & Pacific Railroad in 1862. As part of a joint display by the Great Northern Railroad and the Pullman Co., the locomotive pulled an old Pullman car, used by Abraham Lincoln and other Civil War luminaries. Also on display was Great Northern's newest and most powerful locomotive, Engine #2505. (TNT 5/29/1924, pg. 3) G44.1-129; TPL-674

Railroad locomotives; Union Station (Tacoma); Great Northern Railway Co. (Tacoma);

Three men operating machinery at an Olympia sawmill in June of 1924. Photograph taken on behalf of Pacific Mutual Door Co. G75.1-025

Sawmills--Olympia; Machinery; Lumber industry--Olympia--1920-1930;