On May 9, 1922, a steam cargo ship was pictured docked at the Tidewater Mill, where it was taking on a shipment of lumber. The Mill was located on the east side of the Hylebos Waterway, near the end of 11th St. It was opened in 1918 and had a capacity of 100,000 logs a day. The mill was built on wetlands which were filled for the construction of the mill. Its greatest advantage was its frontage on 750 feet of deep water, allowing the loading of several vessels at a time. (TDL 12/22/1918, Pg. B-8)
Elevated view of Tacoma's industrial tideflats as pictured on March 25, 1922. Visible are the sprawling St. Paul & Tacoma Lumber Co. and the Washington Parlor Furniture Co. at far left and the Pacific Lumber & Millwork Co. in center. They were at the foot or end of the 11th St. Bridge (now Murray Morgan Bridge). TPL-5731; G91.-017
St. Paul & Tacoma Lumber Co. (Tacoma); Washington Parlor Furniture Co. (Tacoma); Pacific Lumber & Millwork Co. (Tacoma);
Construction on the new John Dower Lumber Company headquarters building at 733 East 11th Street began in late November, 1921. The company held an open house for the general public on March 11, 1922. The building, designed by Bullard & Mason, was one of the most unique lumber offices in the country. The finish on the exterior was designed to resemble a log house; the interior was finished in selected native woods, stained and varnished to bring out their natural colors. In 1922 the John Dower Lumber Company was one of the largest retail lumber companies in the United States. The St. Paul & Tacoma Lumber Company purchased the Dower yard and headquarters building in 1942. BU-11057
Lumber industry--Tacoma--1920-1930; John Dower Lumber Company (Tacoma); Building construction--Tacoma--1920-1930;
This elevated view of the Buffelen Lumber & Manufacturing Company, looking toward Tacoma across the Tideflats, was captured in November of 1921. The narrow bridge built on pilings is the old Hylebos Creek bridge. Located in the industrial Tideflats at Lincoln Ave. & Taylor Way, the sprawling Buffelen plant had been undergoing rapid expansion with the construction of a new warehouse in 1916 and a new power plant five years later. Other important improvements in 1921 included dry kilns and warehouses. Buffelen was organized in 1912 by John Buffelen primarily as a door manufacturer. In 1916 the company started to manufacture fir plywood. A small ad placed in the Tacoma Daily Ledger on 7-11-21 listed "fir doors, 3-ply panels, alder panels, sash, etc." as products manufactured by the firm which had offices in Minneapolis and Tacoma. (TDL- Ad 7-11-21, p. 7; Tacoma Sunday Ledger, 1-1-22, B-5-article)
On September 2, 1921, a steam powered cargo ship from the Luckenbach Line was docked at the Tidewater Mill, 3901 E. 11th St. The Tidewater had been opened in 1918 and was capable of producing 100,000 board feet a day. The majority of its products were shipped for export. The mill was built with a frontage of 750 feet of deep water, allowing the company to load several vessels at a time. The Luckenbach Steamship Co., 1850-1974, was one of the longest-lived and most successful U.S. shipping companies. It was started in 1850 by Lewis Luckenbach and grew to be a major force in intercoastal trade. (TDL 12/22/1918, pg. B-8; www.nationalflaggen.de) G49.1-074
The Tidewater Mill, on the east side of the Hylebos Waterway, was photographed on September 2, 1921 as the large steamship "Quinault" was being loaded with timber. The mill was built in 1918 on six acres of soggy land purchased from Gen. James Ashton. The land was filled in and the mill was built. It was one of only a handful on the Pacific Coast capable of producing the longest timbers. Tidewater could cut timbers up to 130 feet in length. The mill site's major advantage was 750 feet of deep water moorage, allowing the loading of several vessels at a time. (TDL 12/22/1918, pg. B-8) G49.1-071; TPL-9251
An unidentified mill in Tacoma's Tideflats was photographed by Marvin Boland in March of 1921. No workers are in sight. Piles of lumber are stacked throughout the yard. G36.1-043
ca. 1920. Copy of Asahel Curtis print #51689 requested by the Washington State Historical Society on June 1, 1977. View of unidentified male and female along side of train. The couple are wearing railroad caps. The man is wearing a white shirt and striped tie under his somewhat soiled uniform.
ca. 1920. Chicago, Milwaukee and St. Paul Railroad, Engine #10254. Copy of Asahel Curtis print #52236 requested by the Washington State Historical Society on June 1, 1977. The electric powered train pauses on the tracks circa 1920. This is one of the 60,000 Asahel Curtis images in the Washington State Historical Society collection.
Railroad locomotives; Railroads; Railroad tracks; Chicago, Milwaukee & St. Paul Railroad Co.;
ca. 1920. Chicago, Milwaukee and St. Paul Railroad, Engine #10253. This is an Asahel Curtis print, #46216, which was requested copied by the Washington State Historical Society on April 1, 1977. Three men are standing next to the electric powered engine, spaced far apart, with the man in the foreground seemingly prepared to give the "go ahead" signal. Photographer Curtis documented industry in Washington State as well as historic events and geographic features. He was based in Seattle and worked there until his death in 1941. 60,000 of his images are held in trust by the Washington State Historical Society. (www.wshs.org/wshm/online-exhibits/curtis/exhibitb.htm)
Railroad locomotives; Railroad cars; Chicago, Milwaukee & St. Paul Railroad Co.; Railroads;
ca. 1920. Chicago, Milwaukee & St. Paul Railroad, Engine #10252. Copy of Asahel Curtis print #51601 requested by the Washington State Historical Society on April 1, 1977. The electric powered train may have been departing/arriving at the Chicago, Milwaukee & St. Paul Tacoma location. The Washington State Historical Society has 60,000 Curtis images in its collection.
Railroad locomotives; Railroads; Chicago, Milwaukee & St. Paul Railroad Co.;
ca. 1920. Ship under construction or being repaired at Skansie Shipbuilding Co. yard at Gig Harbor, circa 1920. Skansie Brothers was founded in 1912 by four Yugoslavian brothers, Pete, Mitchell, Andrew and Joe Skansie. TPL-688, BU-13900
ca. 1920. A fan of Columbia Brew, a "near beer" produced by the Columbia Brewing Company, models a suit for not-just-any occasion. The jacket and pants have been made by pasting labels for Columbia Brew on pants and a striped shirt. The top hat also displays an enlarged label for Columbia Brew. The Columbia Brewing Company opened their brewery on South C Street between South 21st and South 23rd in 1900. They made "Columbia Brew" during the dry period of prohibition. Columbia Brewing Co. was purchased by Heidelberg Brewing Co. in 1949; which was purchased by Carling Brewery in 1959. The plant closed in 1979. (Copies of old prints ordered by Heidelberg Brewing Company in December 1954.) Format 6" x 8". TPL-5565
Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Costumes; Prohibition--Tacoma;
ca. 1920. Smelter operations at ASARCO. Steam rises as ore is poured via hoisted ladle onto giant cylinders at the American Smelting & Refining Co.'s plant in Ruston circa 1920. Other large ladles are on the floor waiting to be filled with ore. TPL-899; G37.1-184
American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1920-1930; Industrial facilities--Tacoma--1920-1930;
ca. 1920. Smelter operations at ASARCO. These employees of the American Smelting & Refining Co. (ASARCO) are carefully monitoring what may be the pouring of molten ore in this circa 1920 photograph. It seems to have caught the attention of several other workers in the area. TPL-2351; G37.1-191
American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1920-1930; Industrial facilities--Tacoma--1920-1930;
St. Paul & Tacoma lumber yard. This November, 1920, progress photograph shows a fuel conveyor belt being constructed 24 feet above the ground at the St. Paul & Tacoma Lumber Co. Two 2 ton locomotive cranes are pictured lifting a 106 foot truss into place. The 641 foot long aerial belt will run from the mill to a point on the waterway directly across from the Consumers Central Heating Co. The conveyor belt will be used to transport the mill's waste wood, formed into logs. The fuel will be dumped on barges and carried across to the heating plant where it will be burned to supply heat to the city. The conveyor belt was all wood with the exception of the belt itself and the roller bearings. Parallel chord lattice was used for the entire length with the exception of street crossings where 106 foot span Belfast type lattice trusses were used. (TDL 1/9/1921, pg. 6) TPL-2047; G36.1-163
Lumber industry--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Belts & belting (Equipment); Fuel trade--Tacoma--1920-1930;
Side view of parked St. Paul & Tacoma Lumber Co. No. 1 truck filled with stacks of what may be plywood. This April, 1920, photograph may have been taken at the company's downtown Tacoma yard. As noted through the doorless truck, there was no driver at the wheel. G36.1-160
St. Paul & Tacoma Lumber Co. (Tacoma); Trucks--1920-1930;
Chicago, Milwaukee and St. Paul Railroad, Engine #10254. On an official test trip in March of 1920, a brand new Bi-polar engine pauses for some publicity shots. The class EP2 engine was manufactured by Alco-GE. The bi-polars were unique in design because the bi-polar fields for each motor were carried on the truck frame. The huge 265 ton, 3,240 hp bi-polars were designed specifically for passenger service in the Cascades and were an immediate success when put into service in 1920. Their top speed was rated at 70 mph and they could pull 1, 120 tons (14 cars) up a 2% grade at 25 mph. The electric locomotives were also unique in appearance, riding low on 44" drivers, and in sound, their trademark a distinctive high pitched shrill from their air whistles. (Charles and Dorothy Wood "Milwaukee Road West") G44.1-079, TPL-2379
Railroad locomotives--Tacoma; Railroad cars--Tacoma; Railroads--Tacoma; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma);
On March 5, 1920, cameras rolled as the electric powered "Olympian" pulled out from Tacoma and made history. This marked the formal opening of the Cascade division for electrically operated trains driven by 3000-volt current supplied by the glacier streams of the Cascades. Over 100 guests from Tacoma and Seattle (railroad officials, newsmen and politicos) were aboard a special pilot train that preceded the Olympian. The Olympian made its maiden electric powered ascent through the passages of the snow draped Cascades to its summit where the special train was sidetracked so the Olympian could continue on to Chicago. The special train would travel to Cle Elum and back to Tacoma. The Chicago, Milwaukee & St. Paul train reached speeds up to 60 mph with barely any effort and without puffs of black smoke. It descended as smoothly as it ascended, proving that cross country electrical trains were viable. G44.1-080 (TDL 3/6/1920, pg. 3; TNT 3-6-20, p. 1) TPL-2376
Railroad cars--Tacoma; Railroad locomotives--Tacoma; Railroad companies--Tacoma; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma); Railroads--Tacoma--1920-1930;
Linco Log & Lumber Co.; Yard engine. The versatility of the steam powered railroad was responsible for early advances in logging. By replacing animals as beasts of burden, they made it possible to harvest timber in the most inaccessible areas. During the 1920's, large scale locomotive operations flourished in the northwest. The system consisted of a main line with spurs, trackage that could be shifted constantly to follow the timber. With the aid of geared engines, such as the Shay locomotive, built from 1884-1945 by the Lima Locomotive Co., they could go into most mountainous areas despite the grade. The logs could then be "yarded," brought from the field into areas for shipment. (Labbe & Goe, Railroads in the Woods) G75.1-074; TPL-818
These plain, but functional, wooden cottages were built for loggers employed by the Linco Log & Lumber Co. The cottages, as seen in March of 1920, were planted in dirt and built tightly side-by-side. Railroad tracks ran directly in front of the houses. These homes are believed to have been located in the Lewis County logging camp owned by Gustaf Lindberg. Linco had an office in Morton and a sawmill in Lindberg, four miles northeast. The company employed 75 men. Gustaf Lindberg, a prominent Scandinavian businessman of Tacoma, had founded the town of Lindberg in 1911 as the company town for Linco. Originally named Coal Canyon, the town was destroyed by fire in 1918 and subsequently rebuilt and renamed for Mr. Lindberg. The town's population remained small and never exceeded 200. Gustaf Lindberg lost ownership of the town and it underwent several name changes. Only ruins of the mill, brick homes and company store remain. G69.1-151 (www.drizzle.com/~jtenlen/walewis/townsal.html)
This is a view of the Linco Log & Lumber Co. mill as seen in March of 1920. It was located in central Lewis County in the small logging community of Lindberg, just a few miles from Morton. Lindberg (formerly known as Coal Canyon) was founded by Tacoma businessman Gustaf Lindberg as the company town for Linco Log & Lumber. G36.1-081
West Fork Logging Co.; Spar Pole. One of the ways to get logs from a remote location to the railroad car was the use of "High Lead" logging. It involved a main cable passed from the engine drum of a "donkey" through a block at the top of a tall spar tree (or pole.) A spar was a 150 to over 200 foot tree with the branches trimmed away and the top lopped off by a "high climber." The cable, powered by the steam donkey, could then be used to pull the logs to the dump. West Fork Logging was located in Mineral in Lewis County and had an office in the Tacoma Building. L.T. Murray was the president and H.E. Post was the secretary. G75.1-091
West Fork Logging Co. (Mineral); Lumber industry--1920-1930;
In March of 1920, a steam donkey on a sled was photographed for the West Fork Logging Co. The donkey was used for pulling logs in from the woods. In its simplest form, a donkey was just a steam engine with a drum and a steel cable. The winch was used to pull in logs or load them. In this case, the boiler is mounted, along with the drums, on a sled to make the unit portable. The steam donkey replaced the logging horses and oxen with the power of steam. It was faster, cheaper and more reliable than animals. The West Fork Logging Co. was located in Mineral, about 14 miles north of Morton in Lewis County. It was owned and operated by L.T. Murray. G75.1-093; TPL-9856 (Labbe & Goe, Railroads in the Woods)
ca. 1919. Much of the work bottling beer at Columbia Brewing Company was done by hand. Bottles were soaked, rinsed, filled, capped, and made ready for shipment. Bottles began to be used for beer in the 1890's using green glass. Brown glass didn't become popular until after prohibition, after 1933. Half gallon sizes were popular at this time. A sign against the wall on the left advertises "Columbia Golden Drops Beer." (Copies of old prints ordered by Columbia Breweries in 1951)
Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People; Bottles; Signs (Notices);
ca. 1919. The wooden-tanked and crudely refrigerated cellar was the one and only storage cellar of the early day Columbia Brewing Company. In those days the brewery had scarcely more than a few hundred barrels of beer in production. Frost has condensed on the pipes leading around the top of this cellar. Gustav Schuster, manager of Columbia Brewing Company from September 17, 1917, to October 31, 1929, is standing on the left with a hat and moustache. Copies of old prints ordered by Columbia Breweries in 1951. (TNT, 1/7/1952) Format 6 1/4" x 7 1/2" TPL-7952
Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People; Schuster, Gustav;
ca. 1919. A horse-drawn wagon is pulling an early horseless delivery van out of a muddy road. The horses have the name of Columbia Brewing draped over their necks on this cold, snowy day. Copies of old prints ordered by Columbia Breweries in 1951. TPL-8348
ca. 1919. Much of the work handling beer at Columbia Brewing Company was done by hand. Men are seen working in a chilled room bottling and racking beer into wooden barrels. A sign against the wall on the left advertises "Columbia Golden Drops Beer". Copies of old prints ordered by Columbia Breweries in 1951. TPL-7953
Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People; Bottles;
ca. 1919. Columbia Breweries. The early day bottling machine was a tedious, hand-operated contraption. A production of 500,000 bottles per year was regarded as somewhat stupendous. Wide belts connected with drive shafts located at the ceiling level operate these early assembly-line machines. Ordered by Columbia Breweries in 1951. (TNT, 1/7/1952) (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4392). TPL-9628. Previously cataloged as WO58568-2.
Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Machinery; Assembly-line methods--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma)--People; Bottles;
ca. 1919. Gustav Schuster was the manager of the Columbia Brewing Company in Tacoma from September 17, 1917 to October 31, 1929. For the whole time he was manager, the brewing industry was prevented from making beer by state and federal prohibition laws. In 1919 Mr. Schuster began producing "Colo - a malt beverage of quality" at the Tacoma plant. Colo was a nonalcoholic "near beer" and was classified as a soft drink. The Columbia Brewery managed to survive prohibition and in 1949 they were bought out by Heidelberg Brewery. Heidelberg was in turn purchased by Carling Brewery which operated the Tacoma plant at 2120-32 South C Street until 1979, when it closed.
Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Offices--Tacoma--1910-1920; Desks; Writing materials; Safes; Columbia Brewing Co. (Tacoma)--People; Schuster, Gustav;
