Henry Mill, construction of prefabricated trusses. Photograph shows piles of timber and a wood form that is being constructed at the Mill, located at the foot of Starr St., near the water. Sperry Mills, located on what is now Schuster Parkway, can be seen in the background. During the war, Henry Mill was active in lumber prefabrication.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill, construction of trusses. Henry Mill was located at 3001 No. Starr, the former site of the old Tacoma Mill Co. The mill was operated by John F. Buchanan, pres., and William F. Buchanan, VP. During the second World War, they became active in lumber prefabrication. Large buildings, such as hangars, were prebuilt in pieces and reassembled on arrival at their destination.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill, construction of trusses. Henry Mill & Timber Co. was located at the foot of Starr St., near the water. During World War II, they held a number of government contracts for prefabricated structures. This photo shows company officials standing in and around a wooden truss that is being built.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

Rayonier locomotive #90 is loaded with logs on a late fall day in 1963. First known as Rainier Pulp & Paper Co. in 1926, the company realized that Western hemlock, plentiful on the West Coast, was a prime source of bleached paper pulp. Its first mill was established in Shelton in 1927. A few years later, Rainier research scientists joined with Du Pont, leading producer of rayon, to perfect the world's first pulp made from hemlock designed especially for the growing rayon field. 1937 saw the incorporation of the company as "Rayonier;" the name combining both rayon and Mt. Rainier, visible from the Shelton mill. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (www.rayonier.com)

Railroads; Logs;

September, 1963, studio set-up of PFS components booklet. A small Native-American doll, with movable joints, extends her arm toward a booklet published by the Plywood Fabricator Service, Inc., regarding fir plywood components. On the cover, two workers are shown lifting a large sheet of plywood from a stack nearby. These sheets are apparently stressed skin panels. Plywood Fabricator Services, Inc., was based in Chicago, Illinois. Photograph ordered by Douglas Fir Plywood Association.

Pamphlets; Dolls;

Weyerhaeuser 4-square plywood is being applied to a framed building on September 28, 1963. One worker is about to lift a sheet of plywood next to the window opening. The roof is not yet in place. Photograph ordered by Cole & Weber Advertising.

Building construction; Plywood;

An enormous Brute Crane manufactured by the Star Iron & Steel Co. of Tacoma balances both men on board and heavy loads of plywood in this customer print copied in September, 1963. The presence of other piles of plywood near the building under construction seem to indicate that the Brute Crane has already been put to good use. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Plywood; Building construction;

Another view of the Brute Crane operated by the George Scofield Co. taken on March 28. 1930, by Marvin Boland; see A139500-30 for additional shot. The crane is apparently in the process of scooping up material. Brute Cranes were manufactured by Star Iron & Steel Co. of Tacoma. Photograph ordered by Star Iron & Steel Co.; copy made of customer print on September 17, 1963.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

A Brute Crane manufactured by the Star Iron & Steel Co. of Tacoma is in the process of hoisting lumber at the Seattle Export Lumber Co. There are piles of lumber on both sides of the crane. Date of original photograph is unknown; copy made on September 17, 1963.

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Lumber; Seattle Export Lumber Co.;

Unseen operators in the small George Scofield Co. crane house handle the controls of a large Brute Crane in this March 28, 1930, photograph originally taken by Marvin Boland. Piles of what appear to be pipe segments are in the foreground. A Union Pacific sign is on top of a building near the waterway. Brute cranes were manufactured by Star Iron & Steel Co. of Tacoma. Photograph ordered by Star Iron & Steel Co; customer print copied on September 17, 1963.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

An eye-catching swimming pool area is a highlight of the luxurious new Four Fountains apartment complex in an October 5, 1963, photograph. Bordered by natural rock, the enormous sunken courtyard contains a 42' wide, heated swimming pool in the shape of the complex's symbol, a fleur-de-lis. The pool was wired for underwater hi-fi music. Plenty of lounge chairs and beach tables provide a welcoming sight to apartment residents. A recreation building and a party room are located nearby. The Four Fountains would host an open house on October 13, 1963, so that potential renters could view the all-electric units, each containing fireplaces, wall-to-wall carpeting, slate entryways and patios/lanais. Photograph ordered by H.A. Briggs. (TNT 7-21-63, B-4, TNT 10-13-63, B-6)

Four Fountains Apartments (Lakewood); Housing developments--Lakewood; Swimming pools--Lakewood;

Exterior of International Design Corp., an engineering concern, on October 15, 1963. The building on 3848 So. Pine St. was next to Barcott's Sea Food and across the street from what is now the Evergreen Post Office. It was built in 1957 for the Industrial Development Co.; name had apparently changed to International Design Corp. by 1963 although it had retained the same manager, Dale Schubert.

International Design Corp. (Tacoma); Engineering--Tacoma;

In January of 1943, the former Contagious Hospital, located at 3333 So. 38th St., was the first application received by the Homes Use Service Bureau as a candidate to convert to accommodations for wartime workers in area plants. The City of Tacoma offered this building as a likely candidate to be converted to 10 to 15 apartments for war workers and their families. The building had served as the offices for the local Works Progress Administration (WPA) for the previous five years; before that it had served as the Contagious Hospital (also known as the "Pest House," short for pestilence) from its construction in 1912 until its closure in 1937. The building is now the office of the Tacoma Coca-Cola Bottling Company. (T.Times 1/1/1943, pg. 7)

Depressions--1929; Works Progress Administration (Tacoma);

The City of Tacoma leased this building in 1943 to the Works Progress Administration ( WPA ) for conversion into apartments for war-time workers. It had been the City's Contagious Hospital for 31 years and was often referred to as "the pest house" (short for pestilence). Since 1950, it has housed the local Coca-Cola Bottling Company. Today, the 1912 building retains much of its original appearance including its cupolas. (T. Times 1/1/1943, pg. 7)

Depressions--1929; Works Progress Administration (Tacoma);

Porta Tower in operation at the Cotten Bros. logging site in Packwood on October 23, 1963. Used as portable steel spur trees, "Porta Towers" were manufactured by Star Iron & Steel Co. of Tacoma for use in the logging industry. Star Iron & Steel was well known for their cranes and specialized equipment which included hydraulic presses, log barkers, radio and television towers, and chip handling buckets. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel; Hoisting machinery; Logs;

Additional view of Star Iron & Steel Co.'s "Porta Tower" in operation at the Cotten Bros. logging site located in Packwood. These towers could be moved from logging camps to other logging camps with relative ease with transport by heavy-duty trucks. "Porta Towers" were mobile steel spur trees. See A139670-4 for another view of "Porta Tower" in use. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel; Hoisting machinery; Logs;

ca. 1926. A furnace manufactured by the Gabriel Tubular Furnace Co., circa 1926, in Tacoma. The company had relocated from Seattle and was located at 1117 Tacoma Ave So. The furnaces were manufactured under the supervision of the Gehri Co., G.F. Gehri was president and Ernst Feix was the secretary-treasurer. The innovative furnace used no fire brick. In place of the brick, the fire box was surrounded by three inch steel tubes in a vertical position which radiated heat directly from the fire box to various feed pipes to the rooms. This method eliminated waste heat through radiation and reduced the consumption of fuel by 25-33 1/3 per cent. (TDL 5/2/1926, pg. E-10)(WSHS)

Gabriel Tubular Furnace Co. (Tacoma); Furnaces--Tacoma;

ca. 1926. A furnace manufactured by the Gabriel Tubular Furnace Co., circa 1926, in Tacoma. The company had been lured from Seattle and relocated to 1117 Tacoma Ave So. , where the furnaces would be manufactured under the supervision of the Gehri Co. The Gehri Co. was a pioneer sheet metal and blower works founded by Adolph Gehri in 1892. G.F. Gehri was president and Ernst Feix was the secretary-treasurer. The Gabriel Tubular furnace innovative heating method was invented by A.A. Gabriel of Portland. (TDL 5/2/1926, pg. E-10) (WSHS)

Gabriel Tubular Furnace Co. (Tacoma); Furnaces;

Johnson, Paulson & Stoltz building. Broad steps lead to the entry of the modern Johnson, Paulson & Stoltz building in the 1100 block of South Cushman. The firm was composed of certified public accountants with offices in Tacoma, Lakewood and Anchorage. Photograph ordered by Don Burr & Associates.

Johnson, Paulson & Stoltz (Tacoma); Facades--Tacoma--1960-1970;

Long view of the exterior of Pacific Iron and Steel Works at 1602 Canal St. (now Portland Ave.) The company manufactured heavy machinery for logging, hoisting and dredging. The foundry was built in 1914.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Pacific Iron & Steel Works, 1602 Canal St.(now Portland Ave.) The worker appears tiny next to a large piece of machinery in the foundry and the steel manufactured piece that he is working on.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Pacific Iron & Steel Works, 1602 Canal St. (now Portland Ave.) Large machinery designed for working with steel covers the warehouse floor.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Exterior view of Pacific Iron & Steel Works, 1602 Canal St. (now Portland Ave.) Two story warehouse, wood and sheet metal construction with elevated second story. The company manufactured logging and hoisting machines, steel castings and dredging machinery. TPL-2937

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Interior of Pacific Iron & Steel Works at 1602 Canal St. (now Portland Ave.) The foundry was built in 1914. The company produced heavy machinery for logging, hoisting, dredging and farming, as well as steel castings. The 1942 City Directory gives the company address as 1602, the pattern shop as 1801 Canal and the plant as 1601 Canal.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Pacific Iron & Steel Works, 1602 Canal St. (now Portland Ave.) Photograph is of large machinery covering the floor of the foundry. The company manufactured steel castings, as well as large machinery for logging, dredging and hoisting.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Pacific Iron & Steel Works, 1602 Canal St. (now Portland Ave.) An employee looks diminutive beside what may be a huge mold for steel castings.The foundry, built in 1914, also manufactured large machinery for logging and hoisting.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Foundry operations - Pacific Iron & Steel Works. Pacific Iron & Steel was housed in a two-story wood & sheet metal structure at 1602 Canal St. (now Portland Ave.) The company, founded in 1914, manufactured logging and hoisting machinery, steel castings and dredging machinery. A worker is pictured here on January 10, 1943, turning the wheel which operates the large machine before him.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma--1940-1950;

Pacific Iron & Steel Works, 1602 Canal St. (now Portland Ave.) An employee turns a wheel operating a large piece of machinery in the foundry.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

A pre-finished oak panel rests on a large oak stump in a rural Lakewood setting in November, 1963. A wire fence separates the stump and panel from the pasture below. Photograph ordered by Cole & Weber Advertising.

Tree stumps--Lakewood; Fences--Lakewood;

ca. 1926. Artist's portrait of a man. Oil painting with gilded frame. (filed with Argentum)

Paintings; Portraits;