This look at St. Paul & Tacoma Lumber Co.'s sprawling grounds was taken from the Puyallup Bridge on May 30, 1927. Col. Chauncey W. Griggs and associates had established one of Tacoma's first major sawmills located along Commencement Bay in 1888, one year before Washington became a state. Abundant sources of hemlock and Douglas firs were available for logging as St. Paul & Tacoma helped Tacoma become the "Lumber Capital of the World." One of the area's largest employers, St. Paul & Tacoma would eventually merge with St. Regis Paper Co. in 1957. (History of Pierce County, Vol. 1- pg. 10-11-article) TPL-3235; G36.1-134

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930;

Elevated 1927 view of what is believed to be the Tidewater Mill Co. facilities located on the east side of the Hylebos Waterway at the end of 11th St. The Hylebos Creek Waterway drawbridge is up to permit ships to pass under. Multiple log dumps are located near the plant and readily accessible. The Tidewater Mill Co. was established in 1918 and had a capacity of 100,000 logs per day. Because it fronted 750 feet of deep water, several ships were able to load cargo at the same time. TPL-6476; G9.1-043

Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Logs;

Log train headed for St. Paul & Tacoma Lumber Co. yards in July of 1927. Mount Tacoma (Rainier) in background. Many trees near the tracks have already been topped.

Logs; Lumber industry--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Rainier, Mount (Wash.);

Truss section manufactured by the Ernest Dolge, Inc., lumber company, shown at unidentified construction site in March of 1928. Ernest Dolge, Inc., had a national reputation for producing special "structual" grades of wood. This truss section was strongly bolted together. The Dolge firm was located on the Belt Line at approximately 1800 Taylor Way in the Tideflats, occupying 16 acres on the Hylebos Waterway. Their sawmill produced timbers for boats, beams, and even fire extension ladders that used Douglas fir. The Dolge mill cut 80,000 feet of timber daily and employed 55 men with a yearly payroll of nearly $100,000. G36.1-125 (TDL 4-10-28, Section 3, Industrial section, p. 1, 8-articles)

Ernest Dolge, Inc. (Tacoma); Lumber industry--Tacoma--1920-1930; Trusses--Tacoma;

On June 13, 1928, two unidentified workers posed with an acetylene torch at St. Paul & Tacoma Lumber Co.'s new mill. The mill in question is believed to be the new sawmill for cutting hemlock logs built in the Tideflats on the site of the old Foundation shipyards near the Union Bag & Paper Corporation pulp mill still under construction. The sawmill would begin operations on June 18th. G35.1-082 (TNT 6-15-28, p. 10-article)

Welding--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Sawmills--Tacoma--1920-1930;

Unidentified machinery at St. Paul & Tacoma Lumber Co.'s new mill, as photographed on June 12, 1928. Established in 1888, the company would merge with St. Regis Paper in 1957.

Machinery; St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930;

Interior of new St. Paul & Tacoma Lumber Co. mill as viewed on June 15, 1928. This is believed to be the new sawmill used to cut hemlock logs built in the Tideflats north of E. 11th St., part of a joint venture between the Union Bag & Paper Corporation (N.Y.) and St. Paul & Tacoma Lumber. The mill, opening on June 18, 1928, was built on the site of the old Foundation shipyards. It contained modern new machinery including a new Yates planer, 72 x 14-inch edger, 48 x 16-inch Diamond gangsaw, 9-foot Diamond band saw, 7-foot resaw and two mechanical saw trimmers. In addition, the mill had a new hammerhead crane which was capable of lifting 7 1/2 tons. G36.1-150 (TNT 6-15-28, p. 10-article)

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Sawmills--Tacoma--1920-1930;

Defiance Lumber Co. plant and stacks, as photographed on June 19, 1928, for a court case. Photograph also includes hill and tracks. The court case possibly involved a $10,000 claim in superior court whereby an individual charged that smoke and refuse from the lumber company's stacks was so heavy that it was a nuisance when the wind blew from the north or northeast. G36.1-117

Defiance Lumber Co. (Tacoma); Smokestacks--Tacoma--1920-1930;

Defiance Lumber Co. facilities, including smokestack and railroad tracks, and neighboring hillside as viewed on June 19, 1928. This scene was photographed for a court case that may have involved pollution claims against the company. G36.1-056 (for another view of smokestack see Boland photograph B18783)

Defiance Lumber Co. (Tacoma); Smokestacks--Tacoma--1920-1930; Railroad tracks--Tacoma--1920-1930;

This photograph of trains of logs on and along Northern Pacific Railway tracks with Northern Pacific boxcars adjacent to the logs was taken in March of 1929. It was later used in a News Tribune article dated October 20, 1930 to help bolster Tacoma's claim to be "the lumber capital of the world." Great trains of logs like these were brought to Tacoma's mills for cutting into lumber before being sent out to the world. More than 80 Tacoma mills converted lumber into finished products. 21 local furniture-making factories used Tacoma lumber to built tables, chairs and all manner of wood products. Tacoma had led the nation in lumber production since 1905. TPL-1542; G44.1-114 (TNT 10-20-30, 4-B)

Logs; Shipping--Tacoma--1920-1930; Northern Pacific Railway Co. (Tacoma); Railroad tracks--Tacoma--1920-1930; Lumber industry--Tacoma--1920-1930;

Log on shute. This log on a shute at an unidentified sawmill was photographed in mid-August of 1919. TPL-8085; G36.1-015

Logs;

Side view of logging equipment on wheels belonging to the Wilson Logging Co. Photograph taken at unidentified location on August 23, 1919. TPL-9852 ; G36.1-032

Lumber industry--1910-1920; Wilson Logging Co.;

In August of 1919, a steam donkey mounted on a sled was photographed loaded on a truck for ease in transport to a logging site. Only the sled itself, built from huge logs, is clearly visible. The cable and winch on the donkey could be used to help load and unload it from the truck. This photograph was ordered by the Wilson Logging Co. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-082

Lumber industry--1910-1920; Wilson Logging Co.;

An early logging truck, used by Wilson Logging Co. to bring in logs, was photographed in August of 1919. The early motor trucks offered an economical alternative to railway logging. Despite the cost of constructing roads, the trucks were a cheaper, faster and more practical way to move the logs. They were a common sight by the 1920s. They usually were underpowered, had an open cab and hard rubber tires, but they could go places that locomotives could not. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-032 (website for the Museum at Campbell River www.crmuseum.ca\exhibits)

Lumber industry--1910-1920; Wilson Logging Co.;

Nine unidentified men were photographed in front of the large St. Paul & Tacoma Lumber Co. store on April 17, 1930. St. Paul & Tacoma, established in 1888, was one of Tacoma's pioneer industries. Its lumber concerns would provide employment for hundreds of local residents. It would merge with St. Regis Paper Co. in 1957.

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1930-1940;

Although motorized logging trucks were becoming more common in the lumber industry, horses were still being used in August of 1919. A pair of horses are pictured above at an unidentified sawmill waiting patiently as planks are being loaded onto an open cart. Photograph ordered by the Wilson Logging Co. TPL-6636 G36.1-052

Logging industry--1910-1920; Wilson Logging Co.;

It is hard to tell in this rather faded picture taken on a foggy day in October of 1930 but it appears that water is spurting from what may be the hold of a cargo ship. Three unidentified men are observing the scene. Photograph ordered by St. Paul & Tacoma Lumber Co. G36.1-158

St. Paul & Tacoma Lumber Co. (Tacoma);

Two unidentified men are looking down at stacks of lumber piled on St. Paul & Tacoma Lumber Co. property in October of 1930. A large crane can be seen dimly in the background. G36.1-156

St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;

Extended view of St. Paul & Tacoma Lumber Co. planing mill and "monorail" as pictured in November of 1919. This may be the aerial tramway constructed to transport lumber from dry kilns to various other parts of the plant, replacing the old horse-and-truck system. St. Paul & Tacoma were putting in improvements to their sawmill on the Tideflats totaling nearly half-a-million dollars. Two new dry kilns were being built as well as an aerial tramway. The improvements were expected to reduce the cost of plant operation. St. Paul & Tacoma employed about 800 men at the time including a considerable night shift. G36.1-155 (T.Times 8-22-19, p. 12-article; TDL 7-19-20, p. 6-article)

Lumber industry--Tacoma--1910-1920; St. Paul & Tacoma Lumber Co. (Tacoma);

St. Paul & Tacoma Lumber Co. yard as photographed on November 24, 1919. As reported in the August 22, 1919, Tacoma Times newspaper, St. Paul & Tacoma Lumber was spending nearly $500,000 in improvements to its sawmill on the Tideflats. An aerial tramway was constructed to carry lumber from dry kilns to other parts of the plant. This would facilitate handling of lumber in the mill. The company was established in 1888 and provided steady employment for many residents for decades. It would merge with St. Regis Paper Co. in 1957. G36.1-083 (T.Times 8-22-1919, p. 12-article)

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1910-1920;

Three unidentified men posed at a logging site in Mineral, Washington, on the first of March, 1936. The hillside beyond the men is strewn with fallen timber. The men are sitting and leaning against a much bigger log. G75.1-098

Lumber industry--Mineral; Logs; Woodcutting--Mineral;

Two photographs were artfully combined in this March, 1936, work by photographer Marvin Boland. Large logs are pictured aboard an open railroad car on tracks while in the background are three unidentified men posed at the base of an enormous old-growth tree. TPL-2117; G75.1-081

Logs; Lumber industry--1930-1940; Trees;

St. Regis logging operations, location unknown, in May of 1936. A heavy duty truck with five coils of wire/chain/rope hanging on one side is mired off the dirt road. Many logs have already been downed and a "donkey" is billowing steam. G75.1-043

Lumber industry--1930-1940; St. Regis Paper Co.; Trucks--1930-1940; Logs; Donkey engines;

This is a view of St. Regis logging operations in May of 1936. The forest location was not given. Here a worker is driving an earthmover of some sort. He is possibly clearing the way for a makeshift road so that trucks could access the area.

Lumber industry--1930-1940; St. Regis Paper Co.; Machinery;

Logging equipment at a Peterman logging site, location at or near Morton, in June of 1936. Equipment is a "donkey" used to move logs. These early diesel yarders were designed to yard logs to a landing using a spar tree. The "donkeys" were mounted on sleds made out of two logs which allowed them to be moved on trucks or railcars. It was possible for them to pull themselves over rough grounds to where they needed to be set up. This diesel yarder is possibly one of the first "Berger" brand yarders with the first V8 Caterpillar engine power plant. TPL-9855; G75.1-046 (Additional information provided by a reader)

Lumber industry--1930-1940; Donkey engines; Peterman Manufacturing Co. (Tacoma);

Close-up of floating log rafts in the City (now Thea Foss) Waterway. These logs were probably destined for pulp production. Washington was third in the nation at this time in pulp producing. The abundance of hemlock and accessibility of water transportation plus low utility rates made Tacoma a prime location for the manufacture of pulp and other lumber products. Photograph taken in March of 1937. TPL-3236; G36.1-080 (T.Times 1,5-articles on pulp)

Logs; City Waterway (Tacoma);

These plain, but functional, wooden cottages were built for loggers employed by the Linco Log & Lumber Co. The cottages, as seen in March of 1920, were planted in dirt and built tightly side-by-side. Railroad tracks ran directly in front of the houses. These homes are believed to have been located in the Lewis County logging camp owned by Gustaf Lindberg. Linco had an office in Morton and a sawmill in Lindberg, four miles northeast. The company employed 75 men. Gustaf Lindberg, a prominent Scandinavian businessman of Tacoma, had founded the town of Lindberg in 1911 as the company town for Linco. Originally named Coal Canyon, the town was destroyed by fire in 1918 and subsequently rebuilt and renamed for Mr. Lindberg. The town's population remained small and never exceeded 200. Gustaf Lindberg lost ownership of the town and it underwent several name changes. Only ruins of the mill, brick homes and company store remain. G69.1-151 (www.drizzle.com/~jtenlen/walewis/townsal.html)

Dwellings--Lewis County; Linco Log & Lumber Co.; Railroad tracks--Lewis County; Lumber industry--Lewis County; Lumber camps--Lewis County;

This is a view of the Linco Log & Lumber Co. mill as seen in March of 1920. It was located in central Lewis County in the small logging community of Lindberg, just a few miles from Morton. Lindberg (formerly known as Coal Canyon) was founded by Tacoma businessman Gustaf Lindberg as the company town for Linco Log & Lumber. G36.1-081

Linco Log & Lumber Co.; Lumber industry--Lewis County; Lumber camps--Lewis County;

West Fork Logging Co.; Spar Pole. One of the ways to get logs from a remote location to the railroad car was the use of "High Lead" logging. It involved a main cable passed from the engine drum of a "donkey" through a block at the top of a tall spar tree (or pole.) A spar was a 150 to over 200 foot tree with the branches trimmed away and the top lopped off by a "high climber." The cable, powered by the steam donkey, could then be used to pull the logs to the dump. West Fork Logging was located in Mineral in Lewis County and had an office in the Tacoma Building. L.T. Murray was the president and H.E. Post was the secretary. G75.1-091

West Fork Logging Co. (Mineral); Lumber industry--1920-1930;

In March of 1920, a steam donkey on a sled was photographed for the West Fork Logging Co. The donkey was used for pulling logs in from the woods. In its simplest form, a donkey was just a steam engine with a drum and a steel cable. The winch was used to pull in logs or load them. In this case, the boiler is mounted, along with the drums, on a sled to make the unit portable. The steam donkey replaced the logging horses and oxen with the power of steam. It was faster, cheaper and more reliable than animals. The West Fork Logging Co. was located in Mineral, about 14 miles north of Morton in Lewis County. It was owned and operated by L.T. Murray. G75.1-093; TPL-9856 (Labbe & Goe, Railroads in the Woods)

West Fork Logging Co. (Mineral); Lumber industry--1920-1930; Steam donkeys; Donkey engines;