Small sheets of plywood are being loaded from an Olympia sawmill directly onto a Northern Pacific car by three men on June 12, 1924. These will be used by the Pacific Mutual Door Co. G75.1-023

Lumber industry--Olympia--1920-1930; Plywood; Sawmills--Olympia; Railroad freight cars--Olympia;

Union Pacific engine #3222 as viewed on June 13, 1924. The powerful locomotive was on the tracks at the Union Depot. TPL-66; G45.1-004

Railroad locomotives--Tacoma; Union Pacific Railroad Co. (Tacoma);

On May 29, 1924 engine # 2505 of the Great Northern Railroad pulled into Tacoma's Union Station. The powerful engine was used to pull the new, all steel Pullman cars of the Oriental Limited, one of the ten trains operated by Great Northern from Chicago to Tacoma. The train, accompanied by a select group of company officials, was on a special introductory cross-country tour. Its new Pullman cars were very luxurious with a full spacious dining room, baths for men and women, and sleepers with headboards, reading lights and individual ventilators. (TNT 5/29/1924, pg. 3) G44.1-131; TPL-673

Railroad locomotives; Union Station (Tacoma); Great Northern Railway Co. (Tacoma);

Plywood operations. Workers at this Olympia sawmill are pictured in June of 1924 during daily plywood operations. Sheets of plywood are being laid out; stacks of plywood are in the fore-and-background. Photograph ordered by Pacific Mutual Door Co. G75.1-026

Lumber industry--Olympia--1920-1930; Plywood; Sawmills--Olympia;

Five workers are pictured on June 12, 1924, in an Olympia mill loading sheets of plywood for the Pacific Mutual Door Co. The men wear gloves, overalls and the ever-present caps. G75.1-024

Lumber industry--Olympia--1920-1930; Sawmills--Olympia; Plywood;

On June 12, 1924, two unidentified workers lean their hands against the enormous cut log which will soon be hoisted and processed. The log will be made into sheets of plywood to be used by the Pacific Mutual Door Co. This photograph, in addition to a number of plywood operations shots, was taken in Olympia on behalf of the company. G75.1-027

Logs; Lumber industry--Olympia--1920-1930; Hoisting machinery;

This is the SS Bienville, nearly ready for launching, in early July of 1924. The combination freighter/passenger vessel was built by Todd Dry Dock & Construction for the Atlantic Steamship line of the Southern Pacific. She would be launched on July 16, 1924. The Bienville is a single screw steamer with a sea speed of 16 knots. After much fanfare, she was delivered to her owners in November but would suffer massive damage due to fire while undergoing repairs in New Orleans in March of 1925. G37.1-112 (TNT 7-9-24, p. 4; TNT 3-19-25, p. 1-article on fire; TDL 3-28-25, p. 1-article on fire)

Boat & ship industry--Tacoma--1920-1930; Boats--Tacoma--1920-1930;

Ship propeller. Three unidentified men stand between the blades of a ship propeller at Todd Dry Dock & Construction's plant along the Hylebos Waterway in July of 1924. Todd Dry Dock's employees consisted of shipbuilders, engineers and boilermakers. TPL-1424; G37.1-118

Boat & ship industry--Tacoma--1920-1930; Todd Dry Dock & Construction Corp. (Tacoma);

Stern of the SS Bienville. The Bienville would be launched the following day, July 16, 1924, from Todd Dry Dock & Construction facilities. The combination freighter/passenger vessel, 445 feet in length with a 57-foot beam, could hold 346 passengers. She was built at a cost of over one million dollars and would be used to travel between New York and New Orleans. The Bienville would catch on fire in mid-March of 1925 while being overhauled in New Orleans. The ship was ablaze from stem to stern but all aboard escaped. G37.1-113 (TNT 6-21-24, p. 1,9-articles; TNT 3-19-25, p. 1-article on fire; TDL 3-28-25, p. 1-article on fire)

Boat & ship industry--Tacoma--1920-1930; Boats--Tacoma--1920-1930;

Two unidentified men gaze at giant wheel constructed at Coast Iron & Machine Works, 1117 Dock St., in August of 1924. The machinery firm was operated by J.A. McRae and R.C.McRae. G35.1-088

Coast Iron & Machine Works (Tacoma);

Small boat under construction at Babare Mfg. Co. site in August of 1924. The Babare brothers, George & Nick, were pioneer shipbuilders with original plant in Old Town. They had moved their facility to 3517 E. 11th St. along the Hylebos Waterway. G37.1-106

Boat & ship industry--Tacoma--1920-1930; Boats--Tacoma--1920-1930;

Three unidentified employees of Coast Iron & Machine Works pose in the firm's Dock St. plant on September 24, 1924. One man fits neatly inside one of Coast Iron's products. G35.1-087

Coast Iron & Machine Works (Tacoma);

An unidentified employee of Royal Dairy (Royal Ice Cream & Milk Co.), 912-14 A St., is shown on October 4, 1924, washing metal milk cans. The company was well known for its slogan, "It's the Cream," as they sold quality ice cream, milk and cream. All products were manufactured in a sanitary plant in Tacoma, made for and by Tacoma people. G6.1-067

Royal Ice Cream & Milk Co. (Tacoma); Dairying--Tacoma--1920-1930;

On October 4, 1924, an unidentified employee of Royal Dairy (Royal Ice Cream & Milk Co.) examines one of three similar machines at the plant located at 912-14 A St. Royal Ice Cream, run by Bert H. Walker, had been in business since about 1900 and sold ice cream, milk and cream products. This was a locally owned business whose ad in the 1924 City Directory stated that its (cream) was a "quality cream manufactured in a sanitary plant" by "Tacoma people" and "not shipped in from outside sources." Special flavors and designs could be made for all occasions. G6.1-068

Royal Ice Cream & Milk Co. (Tacoma); Dairying--Tacoma--1920-1930;

The SS Bienville. The 445-foot Bienville had been launched at Todd Dry Dock facilities on July 16, 1924, and four months later, was nearly ready to be delivered to her owners in New York. A crane, in the process of lifting, is on the dock next to the ship. The Bienville would conduct short ship trials on November 17th and then be moved to the Port of Tacoma piers on November 19th to load initial cargo after her trial run. Over 2500 tons of goods, including machinery, 2000+ tons of hay and a large number of canned goods, will be stored aboard. The Bienville fell victim to fire in mid-March of 1925 while undergoing repairs in New Orleans and was severely damaged. G49.174 (TNT 11-12-24, p. 1-article; TNT 11-14-24, p. 1-article TNT 3-19-25, p. 1-article on fire; TDL 3-28-25, p. 1-article on fire)

Boat & ship industry--Tacoma--1920-1930; Boats--Tacoma--1920-1930; Hoisting machinery;

Linco Log & Lumber Co.; Yard engine. The versatility of the steam powered railroad was responsible for early advances in logging. By replacing animals as beasts of burden, they made it possible to harvest timber in the most inaccessible areas. During the 1920's, large scale locomotive operations flourished in the northwest. The system consisted of a main line with spurs, trackage that could be shifted constantly to follow the timber. With the aid of geared engines, such as the Shay locomotive, built from 1884-1945 by the Lima Locomotive Co., they could go into most mountainous areas despite the grade. The logs could then be "yarded," brought from the field into areas for shipment. (Labbe & Goe, Railroads in the Woods) G75.1-074; TPL-818

Linco Log & Lumber Co. (Lindberg); Lumber industry--1920-1930; Lumber camps--1920-1930; Railroad locomotives--1920-1930;

These plain, but functional, wooden cottages were built for loggers employed by the Linco Log & Lumber Co. The cottages, as seen in March of 1920, were planted in dirt and built tightly side-by-side. Railroad tracks ran directly in front of the houses. These homes are believed to have been located in the Lewis County logging camp owned by Gustaf Lindberg. Linco had an office in Morton and a sawmill in Lindberg, four miles northeast. The company employed 75 men. Gustaf Lindberg, a prominent Scandinavian businessman of Tacoma, had founded the town of Lindberg in 1911 as the company town for Linco. Originally named Coal Canyon, the town was destroyed by fire in 1918 and subsequently rebuilt and renamed for Mr. Lindberg. The town's population remained small and never exceeded 200. Gustaf Lindberg lost ownership of the town and it underwent several name changes. Only ruins of the mill, brick homes and company store remain. G69.1-151 (www.drizzle.com/~jtenlen/walewis/townsal.html)

Dwellings--Lewis County; Linco Log & Lumber Co.; Railroad tracks--Lewis County; Lumber industry--Lewis County; Lumber camps--Lewis County;

This is a view of the Linco Log & Lumber Co. mill as seen in March of 1920. It was located in central Lewis County in the small logging community of Lindberg, just a few miles from Morton. Lindberg (formerly known as Coal Canyon) was founded by Tacoma businessman Gustaf Lindberg as the company town for Linco Log & Lumber. G36.1-081

Linco Log & Lumber Co.; Lumber industry--Lewis County; Lumber camps--Lewis County;

West Fork Logging Co.; Spar Pole. One of the ways to get logs from a remote location to the railroad car was the use of "High Lead" logging. It involved a main cable passed from the engine drum of a "donkey" through a block at the top of a tall spar tree (or pole.) A spar was a 150 to over 200 foot tree with the branches trimmed away and the top lopped off by a "high climber." The cable, powered by the steam donkey, could then be used to pull the logs to the dump. West Fork Logging was located in Mineral in Lewis County and had an office in the Tacoma Building. L.T. Murray was the president and H.E. Post was the secretary. G75.1-091

West Fork Logging Co. (Mineral); Lumber industry--1920-1930;

Drivers pose next to their delivery trucks at the loading docks of Columbia Brewing Company. (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B14210) Ordered by Colulmbia Breweries in 1951. TPL-6494. Previously cataloged as WO58568-4.

Brewing industry--Tacoma--1920-1930; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People;

ca. 1920. Smelter operations at ASARCO. Steam rises as ore is poured via hoisted ladle onto giant cylinders at the American Smelting & Refining Co.'s plant in Ruston circa 1920. Other large ladles are on the floor waiting to be filled with ore. TPL-899; G37.1-184

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1920-1930; Industrial facilities--Tacoma--1920-1930;

ca. 1920. Smelter operations at ASARCO. These employees of the American Smelting & Refining Co. (ASARCO) are carefully monitoring what may be the pouring of molten ore in this circa 1920 photograph. It seems to have caught the attention of several other workers in the area. TPL-2351; G37.1-191

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1920-1930; Industrial facilities--Tacoma--1920-1930;

In March of 1920, a steam donkey on a sled was photographed for the West Fork Logging Co. The donkey was used for pulling logs in from the woods. In its simplest form, a donkey was just a steam engine with a drum and a steel cable. The winch was used to pull in logs or load them. In this case, the boiler is mounted, along with the drums, on a sled to make the unit portable. The steam donkey replaced the logging horses and oxen with the power of steam. It was faster, cheaper and more reliable than animals. The West Fork Logging Co. was located in Mineral, about 14 miles north of Morton in Lewis County. It was owned and operated by L.T. Murray. G75.1-093; TPL-9856 (Labbe & Goe, Railroads in the Woods)

West Fork Logging Co. (Mineral); Lumber industry--1920-1930; Steam donkeys; Donkey engines;

On March 5, 1920, cameras rolled as the electric powered "Olympian" pulled out from Tacoma and made history. This marked the formal opening of the Cascade division for electrically operated trains driven by 3000-volt current supplied by the glacier streams of the Cascades. Over 100 guests from Tacoma and Seattle (railroad officials, newsmen and politicos) were aboard a special pilot train that preceded the Olympian. The Olympian made its maiden electric powered ascent through the passages of the snow draped Cascades to its summit where the special train was sidetracked so the Olympian could continue on to Chicago. The special train would travel to Cle Elum and back to Tacoma. The Chicago, Milwaukee & St. Paul train reached speeds up to 60 mph with barely any effort and without puffs of black smoke. It descended as smoothly as it ascended, proving that cross country electrical trains were viable. G44.1-080 (TDL 3/6/1920, pg. 3; TNT 3-6-20, p. 1) TPL-2376

Railroad cars--Tacoma; Railroad locomotives--Tacoma; Railroad companies--Tacoma; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma); Railroads--Tacoma--1920-1930;

Side view of parked St. Paul & Tacoma Lumber Co. No. 1 truck filled with stacks of what may be plywood. This April, 1920, photograph may have been taken at the company's downtown Tacoma yard. As noted through the doorless truck, there was no driver at the wheel. G36.1-160

St. Paul & Tacoma Lumber Co. (Tacoma); Trucks--1920-1930;

St. Paul & Tacoma lumber yard. This November, 1920, progress photograph shows a fuel conveyor belt being constructed 24 feet above the ground at the St. Paul & Tacoma Lumber Co. Two 2 ton locomotive cranes are pictured lifting a 106 foot truss into place. The 641 foot long aerial belt will run from the mill to a point on the waterway directly across from the Consumers Central Heating Co. The conveyor belt will be used to transport the mill's waste wood, formed into logs. The fuel will be dumped on barges and carried across to the heating plant where it will be burned to supply heat to the city. The conveyor belt was all wood with the exception of the belt itself and the roller bearings. Parallel chord lattice was used for the entire length with the exception of street crossings where 106 foot span Belfast type lattice trusses were used. (TDL 1/9/1921, pg. 6) TPL-2047; G36.1-163

Lumber industry--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Belts & belting (Equipment); Fuel trade--Tacoma--1920-1930;

An unidentified mill in Tacoma's Tideflats was photographed by Marvin Boland in March of 1921. No workers are in sight. Piles of lumber are stacked throughout the yard. G36.1-043

Lumber industry--Tacoma--1920-1930; Mills--Tacoma;

On September 2, 1921, a steam powered cargo ship from the Luckenbach Line was docked at the Tidewater Mill, 3901 E. 11th St. The Tidewater had been opened in 1918 and was capable of producing 100,000 board feet a day. The majority of its products were shipped for export. The mill was built with a frontage of 750 feet of deep water, allowing the company to load several vessels at a time. The Luckenbach Steamship Co., 1850-1974, was one of the longest-lived and most successful U.S. shipping companies. It was started in 1850 by Lewis Luckenbach and grew to be a major force in intercoastal trade. (TDL 12/22/1918, pg. B-8; www.nationalflaggen.de) G49.1-074

Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Cargo ships--1920-1930; Logs;

The Tidewater Mill, on the east side of the Hylebos Waterway, was photographed on September 2, 1921 as the large steamship "Quinault" was being loaded with timber. The mill was built in 1918 on six acres of soggy land purchased from Gen. James Ashton. The land was filled in and the mill was built. It was one of only a handful on the Pacific Coast capable of producing the longest timbers. Tidewater could cut timbers up to 130 feet in length. The mill site's major advantage was 750 feet of deep water moorage, allowing the loading of several vessels at a time. (TDL 12/22/1918, pg. B-8) G49.1-071; TPL-9251

Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Cargo ships--1920-1930; Piers & wharves--Tacoma--1920-1930;

This elevated view of the Buffelen Lumber & Manufacturing Company, looking toward Tacoma across the Tideflats, was captured in November of 1921. The narrow bridge built on pilings is the old Hylebos Creek bridge. Located in the industrial Tideflats at Lincoln Ave. & Taylor Way, the sprawling Buffelen plant had been undergoing rapid expansion with the construction of a new warehouse in 1916 and a new power plant five years later. Other important improvements in 1921 included dry kilns and warehouses. Buffelen was organized in 1912 by John Buffelen primarily as a door manufacturer. In 1916 the company started to manufacture fir plywood. A small ad placed in the Tacoma Daily Ledger on 7-11-21 listed "fir doors, 3-ply panels, alder panels, sash, etc." as products manufactured by the firm which had offices in Minneapolis and Tacoma. (TDL- Ad 7-11-21, p. 7; Tacoma Sunday Ledger, 1-1-22, B-5-article)

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Hylebos Bridge (Tacoma);