ca. 1956. Kaiser Aluminum plant. The new 420 foot potline at the Tacoma reduction plant; the result of a $2,000,000 expansion. The line contains 18 new "super size" reduction cells that will increase aluminum production by 15%. The Bonneville Power Administration will provide the power to reduce the ore to pure metal by electrolysis. Dissolved in solution in long lines of reduction cells ("pots",) alumina ore is subjected to electrical current. The chemicals recombine, the aluminum separates from the oxygen and settles as pure metal, aluminum. (Kaiser Aluminum News, August 1956)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Smoke drifts from the new 500-foot stack at the Kaiser Aluminum plant on Tacoma's Tideflats in late October, 1968. Kaiser was undergoing a period of expansion that would see a new aluminum rod mill open for production in December of 1968. Hylebos Waterway is adjacent to the plant on left side of photograph. Photograph ordered by Kaiser Engineers.

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hylebos Waterway (Tacoma); Aerial views;

Publicity for Permanente News and Times Industrial Page, Permanente Metals, Bill Gorman. Two workmen move alumina into the reduction pots before closing the corrugated cover. Permanente produced more aluminum at this time than was produced by the entire industry in 1937, the third largest producer of aluminum in the nation. The average age of their employees was 35 years. The daily uses of aluminum were multiplying as manufacturers became acquainted with its lightness, strength, corrosion resistance, formability and appearance. (T.Times, 2/25/1949, p.36)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950;

Publicity for Permanente News and Times Industrial Page, Permanente Metals, Bill Gorman. One of the employees at Permanente Metals Corporation leans back with his feet up on a pull-out board on a desk to review a worksheet. Clip-boards, a calendar and a map hang on the wall behind him. He is wearing work boots and a hat while relaxing into this review.

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Desks; Boots;

Her hair in disarray, a harried phone operator at Permanente Metals listens to one of many calls to the big plant at 3400 Taylor Way on February 9, 1949. Permanente, producers of Kaiser Aluminum, ran round-the-clock operations to keep up with the heavy demand by industry and the military for aluminum. Opened in Tacoma in 1947 as one of three big plants in Washington State, the company was the third largest producer of aluminum in the nation, exceeding over 20% of national production. (T.Times 2-25-49, p. 36-article)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Telephone operators--Tacoma--1940-1950;

Permanente Metals, Mr. Love. Olin opened a plant at this location September 1942. In December 1946 the company was sold to Kaiser Aluminum who operated Permanente Metals. The Tacoma plant had its own aluminum reduction plant. Permanente produced "pig" aluminum that was transported to Kaiser plants in Trentwood, near Spokane, to be made into specific grades of aluminum by the addition of other metallic elements such as copper, zinc, silicon, magnesium, manganese, etc. Soda ash from California and alumina from Baton Rough were brought to Tacoma to produce the "pigs". (PMC Annual Report for 1948)

Permanente Metals Corp. (Tacoma)--Employees; Guards--Tacoma--1940-1950; Private police--Tacoma--1940-1950; Gates--Tacoma--1940-1950; Factories--Tacoma--1940-1950; Aluminum industry--Tacoma--1940-1950;

Girls from Catholic College visiting Permanente plant, Bill Gorman. Students watch while molten alumina is siphoned from a reduction cell into a large crucible at the Permanente plant. Tacoma Catholic College had purchased the former Weyerhaeuser mansion, Haddaway Hall at 4301 No. Stevens St., and converted it into a Junior College for Women.

Permanente Metals Corp. (Tacoma); Aluminum industry--Tacoma--1940-1950; Foundries--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Students--Tacoma--1940-1950;

Publicity shots at Permanente Metals, Bill Gorman. Three men are caught playing craps in the storage yard at Permanente Metals. A man using a piece of lumber as a club is coming up behind them. The dice are still in mid-air creating shadows in front of the man who has just released them. There's plenty of money on the play. Aluminum pigs are stacked up all around the players. TPL-4555

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Employees--Tacoma--1940-1950; Gambling--Tacoma--1940-1950;

Kaiser Aluminum & Chemical Corp. Pig aluminum, stacked and banded, is being loaded onto railroad cars for transportation to Kaiser's Trentwood, Wa. rolling mill to be made into a finished product. The Tacoma plant was an aluminum reduction facility. It produced the pig aluminum from treated ore. Each "pig" weighs 50 pounds and contains higher that 99% pure aluminum. The plant capacity in 1953 was 64 1/2 million pounds a year. (TNT 9/5/1955, pg. C-8)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

ca. 1956. Kaiser Aluminum plant. The Tacoma plant was located on the Tideflats, about 5 miles north of downtown Tacoma. Its proximity to the Bonneville Power Administration made it the perfect location for producing aluminum from ore by electrolysis. Dissolved in solution in long lines of reductions cells ("pots"), alumina is subjected to electrical current. Chemicals recombine, aluminum separates from its oxygen and settles as pure metal. Tacoma was part of a "mill to mill" operation, the alumina was shipped by rail in from Baton Rouge, La., and the finished aluminum was railed out to Kaiser's Trentwood rolling mill 300 miles to the East. (Kaiser Aluminum News, August 1956)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

ca. 1956. Kaiser Aluminum plant. The Tacoma plant was a reduction plant, where treated ore (alumina) was subjected to an electrical current, dividing the oxygen from the pure metal (aluminum.) The plant employed approximately 500 workers, who worked on a 24 hour, around the clock basis. Its payroll was over $2,000,000 a year, and it purchased more than $1,300,000 of Northwest materials, supplies and services in a year. It was part of the Kaiser Industries conglomerate founded by Henry J. Kaiser, a diverse group of businesses that included paving, dam construction, ship building, the production of aluminum, steel, cement and other building materials, automobile production and Kaiser foundation heath care. (Kaiser Aluminum News, August 1956 and "The Kaiser Story")

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Exterior of new aluminum rod mill at Kaiser Aluminum. Kaiser gradually phased in their new aluminum rod mill with its first rod being formed in a test run in December, 1968. The completely automated mill would produce rod at a rate of 1,800 feet a minute. Kaiser would produce the first semi-fabricated aluminum product for Tacoma. Photograph ordered by Kaiser Engineers, Inc. (TNT 12-8-68, A-7)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

ca. 1973. Standing over a hundred feet tall is this unidentified supporting structure at Kaiser Aluminum's Tideflats plant. Its size is apparent compared to the man standing at the foot of one of the supports. Even the truck nearby appears miniscule. Photograph ordered on December 19, 1973, by Puget Sound Fabricators, Seattle.

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1970-1980;

New aluminum rod mill under construction. Kaiser Aluminum & Chemical Corp. was building a new rod mill in 1968; it would be ready for operation in December of that year. Once fully functional, the completely automated mill would produce rod at a rate of 1,800 feet per minute. Kaiser was undergoing a period of expansion where a new 500-foot stack and the rod mill were built, a second alumina dome with 100,000-ton capacity would be completed in 1969. Photograph ordered by Kaiser Engineers. (TNT 12-13-68, C-18)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

New aluminum rod mill under construction. Construction progresses on the new Kaiser Aluminum's rod mill on 3400 Taylor Way in early November, 1968. Covers have now been placed on the two small dome-containers. It is possible that these containers would hold the molten aluminum that would be used to manufacture the 3/8th-inch rods. Earlier photograph taken on October 18, D154922, Image 4, shows them uncovered. The mill would form its first rod in a test run on December 12, 1968. Photograph ordered by Kaiser Engineers. (TNT 12-13-68, C-18)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

Kaiser Aluminum plant aerials. Kaiser Aluminum, located at 3400 Taylor Way in the Tideflats, had resumed production in 1964 after being closed for six years. They were still expanding in 1968 when the above aerial photograph was taken. Hylebos Waterway and Northeast Tacoma in background. Photograph ordered by Kaiser Engineers. TPL-4741

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Aerial views; Hylebos Waterway (Tacoma);

Closer aerial view of Kaiser's Tacoma plant located at 3400 Taylor Way in the industrial Tideflats. Taken on October 30, 1968, photograph emphasizes the height of what is believed to be the 500-foot stack recently constructed. Hylebos Waterway in background. Photograph ordered by Kaiser Engineers. TPL-6580

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Aerial views; Hylebos Waterway (Tacoma);

Permanente. Two men are having fun with a load of alumina, a fine white powder that is refined from alumium-bearing ore, bauxite. Bauxite was mined in South America, refined, using the Bayer process, in Baton Bouge and shipped by rail to the Pacific Northwest where it was converted into primary aluminum. Four pounds of bauxite were required to obtain two pounds of alumina shich yields one pound of aluminum. As of September 1948 nearly 500 boxcar loads of alumina per month were brought to Tacoma and Mead aluminum reduction plants, thereby becoming one of the largest users of boxcars in the Northwest.(Permanente Metals Corporation 1947-1948 Annual Report; T.Times, 9/6/1948, p.12)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Aluminum; Minerals--Tacoma; Laborers--Tacoma--1940-1950;

Girls from Catholic College visiting Permanente plant, Bill Gorman. Several students from the freshman chemistry class at Tacoma Catholic College watch as the white, powdery alumina is added to a reduction pot in preparation to being melted and poured into molds to form pig aluminum. This was the first step in creating the later stages of aluminum that would be used in making Kaiser aluminum products from roofing and siding to airplane parts, ice cube trays and pots and pans. (TNT, 3/1948)

Permanente Metals Corp. (Tacoma); Aluminum industry--Tacoma--1940-1950; Foundries--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Students--Tacoma--1940-1950;

From the evidence provided by this photograph, the security guards at the Kaiser aluminum plant on the Tideflats had a pretty easy life in September of 1947. But one has to wonder what the corporate headquarters for Permanente Metals Corporation thought about the security at their Tacoma plant when they saw this carefully posed picture. The Tacoma plant was only one year old, having been taken over by Permanente Metals Corp. from the Olin Corp. in 1946. (Permanente Metals, Mr. Love) TPL-9603

Permanente Metals Corp. (Tacoma)--Employees; Guards--Tacoma--1940-1950; Private police--Tacoma--1940-1950; Gatehouses--Tacoma--1940-1950; Factories--Tacoma--1940-1950; Aluminum industry--Tacoma--1940-1950;

The Tacoma plant of the Permanente Metals Corporation accomplished its first casting of "pigs" from molten metal in November of 1947. Plant employees in the pot room were photographed getting the newly molten metal in the ladle ready to pour into a mold to form pigs. Cast pigs could weigh from fifty and one thousand pounds depending on size and composition. Once cooled, the pigs were stacked on pallets and transported to the rolling mill at Trentwood, located near Spokane, Washington. The pigs from the Mead and Tacoma plant would later be re-melted in furnaces where other metallic elements were added to form standard alloys. Tacoma's Permanente plant produced aluminum in commercial quantities for Henry J. Kaiser's industrial operations. (PMC Annual Report, 1947-1948; T.Times 11-19-47, p. 18-alt. photograph & article).

Aluminum industry--Tacoma--1940-1950; Aluminum; Industrial facilities--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma)--Employees;

Permanente would be producing 42,000,000 pounds of pure aluminum per year at the Tacoma plant. Tacoma's output will supplement the Mead Reduction plant near Spokane, Washington. Permanente Metals delayed their plant opening, until the newest generator of the Grand Coulee power plant was in operation. View of Permanente technicians checking equipment (T. Times, 10/31/47, p. 1).

Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Control rooms--Tacoma; Permanente Metals Corp. (Tacoma)--Employees;

Permanente Metals Tacoma plant was a modern aluminum reduction plant. The plant had two pot lines that produced about 42,000,000 pounds of aluminum per year. This plant was located in the Tide Flats area and was spread over 129 acres, the plant went into official production on October 31, 1947. View of Permanente employee using the time clock (T. Times, 10/31/47, p. 1).

Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Time; Time clocks; Permanente Metals Corp. (Tacoma)--Employees;

Publicity shots at Permanente Metals, Bill Gorman. Two of the staff at Permanente are checking the pressure through a hose and narrow pipe on the arm of the young man in a chemical lab. Glass containers and tubing are set up on the counter in front of them. They both wear aprons with bibs. The woman has her goggles lifted up onto her forehead. TPL-4555

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Employees--Tacoma--1940-1950; Laboratories--Tacoma--1940-1950;

Publicity shots at Permanente Metals, Bill Gorman. Two workmen from the Permanente plant stand side-by-side, the older man has his arm around the shoulder of a younger man. The older man is wearing coveralls, a heavy shirt and a hat. He has goggles hanging around his neck. The other, younger man is wearing a jacket, a plaid shirt, and a hat. They are both smiling. The plant facilities are seen in the background. TPL-4555

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Employees--Tacoma--1940-1950;

Permanente Metals would produce 40 million pounds of aluminum per year. The company sells a million and a half pounds of finished aluminum sheets per year o many U. S. firms. Permanente Metals had their headquarters in Oakland, California, Henry Kaiser was the President. View of laborers stacking up pigs, alloyed metals that have been cast into individual ignots (T. Times, 2/12/47, p. 5).

Machinery; Equipment; Laborers--Tacoma; Aluminum industry--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma);

Permanente Metals approaching the end of their first year of operations in Tacoma, which proved to be quite successful. Permanente's new research lab will be looking for ways to improve uses of this lightweight metal, increase aluminum production and the development of new products and product applications. Exterior view of Permanente Metals Corporation, laborer in foreground is hauling aluminum pigs using a forklift, workmen are walking by in background (T. Times, 8/23/48, p. 5)

Industrial facilities--Tacoma; Laborers--Tacoma; Research facilities--Tacoma; Hoisting machinery; Aluminum industry--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma);

On October 27, 1948, Permanente Metal Corporation employees, left to right, Charlotte Thorestad, C.P. (Pat) Love (plant manager) and Darlene O'Brien sat surrounded by a sea of iced cupcakes marked with a "P" and decorated with a single candle. Permanente's aluminum reduction plant at 2400 Taylor Way was celebrating its first year of production of Kaiser Aluminum with a "Family Day" Open House. Employees along with 1,500 friends, families and relations were the guests of management. They observed the step by step process of making aluminum and ate hot dogs cooked on a 500 lb. "pig" of aluminum, sandwiches, cupcakes and punch. The plant had been previously operated during World War II by the Olin Corporation. After its purchase by Kaiser, it became one of six aluminum plants operated by the company. The other plants were located at Mead and Trentwood Washington (near Spokane), Baton Rouge La., Newark Ohio and San Jose Ca. The Tacoma plant was permanently closed in 2002 and later demolished. (TNT 10/28/1948, p.1)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Employees--Tacoma--1940-1950; Baked products--Tacoma--1940-1950; Love, Charles P.; O'Brien, Darlene; Thorestad, Charlotte; Anniversaries--Tacoma--1940-1950;

Permanente's First Anniversary, Permanente Metals, Bill Gorman. A crowd of employees and their families watch James Condos, a caster at the plant, demonstrate pouring molten aluminum from a large ladle into a form for pig aluminum. More than 1,500 visitors crowded into the plant October 27, 1948, to celebrate the plant's first year of operation under Kaiser. They saw the step-by-step processes that went into making aluminum by touring the potrooms, rectifier stations, the machine shop, blacksmith shop and the casting room. (T.Times, 10/18, 1948, -.1)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Families--Tacoma--1940-1950; Anniversaries--Tacoma--1940-1950;

A view across the Tideflats and adjacent pond shows the expanded Kaiser Aluminum plant in November, 1957. Built originally for Olin Corporation in 1942, and purchased by Kaiser four years later, heavy demand for aluminum products post-war made expansion of the plant necessary. Kaiser spent nearly three million dollars in 1952 to improve their Tacoma plant facilities which led to a large increase in aluminum production. Photograph ordered by Kaiser Aluminum.

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;