St. Regis company spent the last few years focusing on expanding the Tacoma plant, the Pensacola, Florida plant would begin expanding during 1949. Interior view of St. Regis plant; battery of jordans each driven by a 400 horsepower motor, these prepare stock for the Fourdrinier paper machine. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Logs for the St. Regis pulp mill were originally supplied by the St. Paul and Tacoma lumber mill; these two companies established a partnership since the beginning of St. Regis' operations. In 1949 St. Regis began producing paper at the Tacoma plant. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Since the 1930's St. Regis had been investing money to eliminate the offensive "odor" produced by the plant; the company would continue to address this issue and pollution questions for many years. Interior view of plant and view of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of plant, large rolls of paper are being processed after going through the "wet end" machine, they are at the pre-dryer stage. The paper then goes through a "Flakt air dryer" prior to being cut, baled, packaged and distributed. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers. TPL-6811

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

In 1950 St. Regis began expanding the pulp mill in Tacoma, this project was expected to be completed in 1951. The addition of the kraft paper producing department in Tacoma began in 1945, the plant began producing paper in January 1949. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of newly expanded and modernized St. Regis paper mill; the company's new and modern machinery and equipment make high volume paper production possible. Photo ordered by General Electric Company, machinery and equipment manufacturers. General Electric had their Tacoma offices located in the Washington Building at 1019 Pacific Avenue.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis plant, this battery of ten "Jones Majestic" Jordans is each driven by a 400 horsepower motor, the Jordans prepare stock for the Fourdrinier paper machines. Photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

The completion of the kraft paper mill in Tacoma, allowed St. Regis a considerable increase in the paper production industry. Interior view of St. Regis plant, view of Jones Majestic machinery; photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

The completion of the expansion project in Tacoma, have made this plant the focal point for St. Regis' expanding pulp, paper and multiwall bag operations in the West. Interior view of St. Regis plant, view of Jones Majestic machinery; photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

St. Regis had more than twenty plants throughout the world, in 1949 the company's focus was on the Tacoma plant, due to the start of kraft paper production. Interior view of St. Regis plant, view of Jones Majestic machinery; photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

St. Regis Paper Company was organized in 1899, they began manufacturing paper in New York in 1901. Interior view of St. Regis paper mill in Tacoma, seven rolls of paper are lined up, one roll is being moved by an Ederer manufactured crane. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

In 1949 St. Regis ranked among the top companies in the paper and pulp industry. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma--1940-1950; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis was able to broaden their range of products and increase production capacity by enlarging their Tacoma plant and beginning the production of kraft paper. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

Two workers are pictured unloading a roll of Kraft paper to join others already stored in St. Regis' paper storage room. St. Regis had began producing paper in January of 1949 as it used the most modern equipment available at the time to convert liquid pulp into heavy multiwall Kraft paper. The plant was able to produce about 240 tons of multiwall bag paper per day.

Paper industry--Tacoma--1940-1950; Paper; Hoisting machinery; Machinery; Equipment; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis is one of the pulp and paper companies that carry the paper producing cycle all the way from wood, to pulp, to paper, and into other various products. View of unidentified worker sitting in an operating booth, he is likely in the area where logs are kept prior to the wood chipping process.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Logs; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis has been expanding and improving their facilities and plants throughout the world based on research being conducted in their Research and Development Departments. The company's laboratories are ranked among the highest in the paper and pulp industry. View of unidentified men in research and testing area in Tacoma's St. Regis plant in this photograph dated January 21, 1949. (S4)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

The St. Regis laboratories were conducting various types of research related to the pulp and paper industry. In 1949, they were focusing in an extensive program connected with pulping, new paper coatings, and new paper products. The laboratories helped maintain high levels of quality control. View of unidentified men in research and testing area at Tacoma's St. Regis plant. (S5)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

The Tacoma plant was producing both bleached and unbleached Kraft paper. This plant was able to supply its own pulp from the local mill, therefore making St. Regis-Tacoma very important in the paper industry. Interior view of Tacoma's St. Regis plant, wood chips are being processed prior to the Kraft paper production.

Paper industry--Tacoma--1940-1950; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis began producing paper in the Tacoma plant in January 1949; view of the new high speed kraft paper machine that is designed to operate at 2,000 feet per minute and produce paper nearly fourteen feet wide. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis' first mill was located in Deferiet, New York; they now had paper and pulp mills located throughout the world. Interior view of the Tacoma St. Regis plant, an unidentified man is working with recently installed equipment. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

Western Gear at St. Regis plant. A view of two large pieces of machinery used in paper manufacturing at the new Kraft paper plant of St. Regis manufactured by Pusey-Jones Corporation, Wilmington, Delaware.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

St. Regis paper plant in Tacoma is the focal point of the company's expanding pulp, paper and multiwall bag operations in the West Coast. The paper mill was recently completed and is one of the largest and most modern plants in the United States. The new paper producing mill is now able to mass produce paper and offer their customers their quality product in higher volumes and lower prices. Workmen are using an "Ederer" crane to move an enormous roll of paper.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. Tacoma's St.Regis plant would have their own research laboratory within the industrial site. Interior view of plant, paper roll is being moved by a large "Ederer" crane.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis Paper Company dominated the Tacoma Tideflats with their ever expanding facilities at the terminus of the Puyallup Waterway. Taken from the top of the water tank. Ordered by St. Regis Paper Co., Mr. J.H. McCarthy.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

One of the employees at St. Regis Paper Company records information from a printout at one of the machines in the plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.

St. Regis Paper Co. (Tacoma)--People; Paper industry--Tacoma--1940-1950;

An employee at St. Regis watches to be sure all goes well in the wet pulp to paper process in the new kraft paper plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

Chip feeder at St. Regis plant, Link Belt Company, Mr. R.W. Johnson. Bark was first removed from logs and moved to the woodroom. From the woodroom chunks of wood were moved to wood chippers where they were broken into fine chips. These went into a hopper in the top of a digester where the chips were broken down by chemicals and the resulting pulp was washed and bleached. This large, funnel-shaped machine handled the fine chipping and delivery to the digester.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

St. Regis had been expanding their facilities for many years, the company had added new buildings and had recently begun the mass production of paper in Tacoma. St. Regis began producing paper in January 1949; the paper mill was converting the liquid pulp into heavy multiwall Kraft paper, using the most modern equipment available. Interior view of plant and new roll grinding machine.

Paper industry--Tacoma--1940-1950; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Dexter's Machine at St. Regis Paper Company. During 1950 the pulp mill at Tacoma was expanded. St. Regis made kraft paper at six mills with a combined capacity of approximately 360,000 tons a year. Ordered by Bird Machine Company, South Walpole, Massachusetts, Mr. V. Fahlgren.

Paper industry--Tacoma--1950-1960; Machinery; Industrial facilities--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960;

Aerial view shows progress being made on new construction for the St. Regis Paper Company in September, 1950. Established as a company in 1899, St. Regis was open for business in Tacoma in 1928. Rebuilt and modernized in 1936, St. Regis bought additional acreage from the St. Paul Tacoma Lumber Company in 1947 to add a paper mill and multi wall bag plant. According to the St. Regis 1950 annual report, Tacoma's expansion of their pulp mill would enlarge the pulp capacity from 115,000 to 135,000 tons a year. The new capacity will be in production in 1951.

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Factories--Tacoma--1950-1960; Progress photographs--1950-1960; Aerial photographs;