Showing 3117 results

Collections
Industries With digital objects
Print preview View:

C59415-18

ca. 1918. Columbia Brewing Company was established in 1900 on South C Street not far from the giant Pacific Brewing and Malting Company. Emil Kliese was the owner, president and brewmaster of the plant until statewide prohibition in 1916. He died the next year. National Prohibition lasted 13 years, from 1920-1933. During that time the company manufactured soft drinks: "Birch Beer", "Chocolate Soldier", "Blue Jay" (a grape drink), and "Green River". Copies of old prints ordered by Columbia Breweries in 1951. (Brewed in the Pacific Northwest, Gary Meier)


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma);

C59415-13

ca. 1918. Drivers pose in front of the Columbia Brewing Company with five delivery trucks. The truck second from the right is loaded with barrels. Copies of old prints ordered by Columbia Breweries. A copy of Boland print #B1495.


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Trucks--Tacoma--1910-1920;

BOLAND G73.1-027

ca. 1918. In 1853, Capt. William Talbot located the perfect site for a lumber mill, a sheltered bay five miles inside of the Hood Canal. He and partners Josiah Keller, Andrew Pope and Charles Foster built the Puget Mill in an area called "Teekalet" by the native Americans. In 1865, the town that the mill had erected for its workers was renamed Port Gamble. A company store was built in 1853, but it was replaced in 1916 by this office and general store built on Rainier Ave. As the centerpiece for the company town, the store sold groceries and household items needed by the workers and also served as the communication center, posting news of the world on its bulletin boards. The offices for the company were located upstairs. The building is still the General Store in Port Gamble, although it now caters to tourists, while a museum is now located on the lower level. (HistoryLink.org, Bremerton Sun 5/15/1953) Boland #23


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); General stores--Port Gamble;

BOLAND G73.1-037

ca. 1918. Junction of Rainier Ave and View Drive in Port Gamble, circa 1918. The building in the back was the company office and attached company store of Puget Mill. Puget Mill owned the entire town of Port Gamble and operated it for the benefit of their workers. In the foreground was the Community Hall, operated as a meeting venue for workers. It also contained the doctor, dentist and telegraph offices, a barber shop, Post Office and meeting room that could double as a theater and movie house. (Historylink.org) Boland #30


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble); Post offices--Port Gamble; Community centers--Port Gamble; General stores--Port Gamble;

BOLAND G73.1-029

ca. 1918. Puget Mill Co. New England style "Saltbox" houses for company employees in Port Gamble, circa. 1918. Company officials insisted on a hierarchy in housing; managers had the best homes on the highest ground, skilled workers and their families came next, immigrant workers (Scandinavian, German, Swiss, Slovaks and Greeks) arriving in the 1880's were housed on the other side of the second growth forest west and south of the town in areas known as "New England" and "Murphy's Row," unmarried men lived in bunk houses and cabins on the spit near the mill and Chinese workers lived separately out of town, as did native Americans workers. The worker housing was surrounded by picket fences and had fireplaces, electric lights, bathrooms and a water closet. Rent for a three bedroom was about $7.00 a month. (Historylink.org) Boland #21


Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

BOWEN FOUNDATION-36

Foundation Co., Yard #4, located on the Tacoma Tideflats - Rigger Storage and Water Tank, May 10, 1918. The Riggers Store House measured 32' x 27'6", 14' high, 880 sq. feet and built at a cost of $250. The water tank cost $1241 to build and consisted of a 25' diameter tank 16' high and a 26 x26 platform, 18' high. Due to the fact that most of the machinery was steam driven, an abundance of water was very important.

BOLAND-B1318

Employees of Star Iron Works posed aboard their patriotic "float" for the 1918 Labor Day Parade. The float was stopped just south of the Union Station at 1717 Pacific Avenue. They were part of the nearly 20,000 representatives of organized labor who marched in the largest Labor Day parade the city of Tacoma had seen to that date. There were eight large divisions of labor, 12 bands including two from Camp Lewis, floats and pretty girls on display. Working men and women, from boiler makers to cigar makers to cooks, all marched in countless lines during the hour-long parade which ended at Wright Park. Industries were booming during the war years as noted by the increase of shipworkers marching in the parade - 4,700 compared to the 47 the year before. G38.1-041 (TDL 9-2-18, p. 1-article; TDL 9-3-18, p. 1-article; TNT 9-2-18, p. 1-article)


Star Iron & Steel Co. (Tacoma); Parades & processions--Tacoma--1910-1920; Floats (Parades)--Tacoma--1910-1920;

C59415-11

ca. 1919. Much of the work bottling beer at Columbia Brewing Company was done by hand. Bottles were soaked, rinsed, filled, capped, and made ready for shipment. Bottles began to be used for beer in the 1890's using green glass. Brown glass didn't become popular until after prohibition, after 1933. Half gallon sizes were popular at this time. A sign against the wall on the left advertises "Columbia Golden Drops Beer." (Copies of old prints ordered by Columbia Breweries in 1951)


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People; Bottles; Signs (Notices);

C59415-8

ca. 1919. The wooden-tanked and crudely refrigerated cellar was the one and only storage cellar of the early day Columbia Brewing Company. In those days the brewery had scarcely more than a few hundred barrels of beer in production. Frost has condensed on the pipes leading around the top of this cellar. Gustav Schuster, manager of Columbia Brewing Company from September 17, 1917, to October 31, 1929, is standing on the left with a hat and moustache. Copies of old prints ordered by Columbia Breweries in 1951. (TNT, 1/7/1952) Format 6 1/4" x 7 1/2" TPL-7952


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People; Schuster, Gustav;

C59415-4

ca. 1919. A horse-drawn wagon is pulling an early horseless delivery van out of a muddy road. The horses have the name of Columbia Brewing draped over their necks on this cold, snowy day. Copies of old prints ordered by Columbia Breweries in 1951. TPL-8348


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Snow--Tacoma; Horse teams--Tacoma; Carts & wagons--Tacoma; Trucks--Tacoma--1910-1920;

C59415-17

ca. 1919. Much of the work handling beer at Columbia Brewing Company was done by hand. Men are seen working in a chilled room bottling and racking beer into wooden barrels. A sign against the wall on the left advertises "Columbia Golden Drops Beer". Copies of old prints ordered by Columbia Breweries in 1951. TPL-7953


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People; Bottles;

BOLAND-B4392

ca. 1919. Columbia Breweries. The early day bottling machine was a tedious, hand-operated contraption. A production of 500,000 bottles per year was regarded as somewhat stupendous. Wide belts connected with drive shafts located at the ceiling level operate these early assembly-line machines. Ordered by Columbia Breweries in 1951. (TNT, 1/7/1952) (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4392). TPL-9628. Previously cataloged as WO58568-2.


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Machinery; Assembly-line methods--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma)--People; Bottles;

C87485-47

ca. 1919. Gustav Schuster was the manager of the Columbia Brewing Company in Tacoma from September 17, 1917 to October 31, 1929. For the whole time he was manager, the brewing industry was prevented from making beer by state and federal prohibition laws. In 1919 Mr. Schuster began producing "Colo - a malt beverage of quality" at the Tacoma plant. Colo was a nonalcoholic "near beer" and was classified as a soft drink. The Columbia Brewery managed to survive prohibition and in 1949 they were bought out by Heidelberg Brewery. Heidelberg was in turn purchased by Carling Brewery which operated the Tacoma plant at 2120-32 South C Street until 1979, when it closed.


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Offices--Tacoma--1910-1920; Desks; Writing materials; Safes; Columbia Brewing Co. (Tacoma)--People; Schuster, Gustav;

BOLAND-B4391

The Columbia Brewing Company was started in 1900 by three men with a capitalization of $50,000. William Kiltz was sales manager and Emile Kliese was owner, president and brewmaster. Their facilities, typical of the era, were primitive, but they were determined to make the finest beer possible. During the early stages of beer making malted barley was milled and the malt grain was mixed with pure water in a large wooden tub called a "mash tun". This "malt mash" was stired by hand with a long wooden paddle and then channeled or piped into large copper brew kettles where the "wort" was boiled with hops. This view shows the laboratory and mixing room in the bottling department of Columbia Brewing Company. The brewery was located in a newly built facility at 2120-32 South C Street. Copy ordered by Columbia Breweries, Inc., in 1951. (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4391) Another copy of this photograph was ordered under number C87485-42. TPL-7956. Previously cataloged as WO58568-1.


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People;

BOLAND-B4394

The early racking room at Columbia Brewing Company, where draft beer was barreled, was a matter of wooden barrels, cumbersome hand maneuvering methods and inexact controls. A thick layer of frost can be seen on the pipes above the workmen's heads. They are wearing heavy clothes to work in the chilled cellars. Ordered by Columbia Breweries in 1951. (TNT, 1/7/1952) (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4394). Previously cataloged as WO58568-3.


Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Barrels--Tacoma; Columbia Brewing Co. (Tacoma)--People;

BOLAND-B1632

Exterior 1919 view of Babare Brothers Shipyards. The plant, located on five acres in Old Town, was one of Tacoma's pioneer shipbuilding facilities. The Babare Brothers consisted of George and Nick Babare, whose Croatian-born father Stephen was a master shipbuilder. Employing some 300 workers in 1918, the plant was busy building large wooden steamers for the government. The yard contained two building slips, each served by gantry cranes, a modern sawmill and in-demand machine shop. Prior to the Babare Brothers entry into government work, they built cannery tenders and purse seine boats for fishermen and canneries in Oregon, Washington and Alaska. They were prepared to return to this type of work after the government's demand for ships decreased. On November 30, 1919, the Tacoma Daily Ledger reported that the Babare Brothers had obtained a site along the Hylebos Waterway. (Pacific Marine Review, August, 1918, p. 90-article) G37.1-180


Babare Brothers Shipbuilding (Tacoma); Boat & ship industry--Tacoma--1910-1920;

BOLAND-B1642

The dining room staff at Todd Shipyards on the tideflats posed for a group portrait in February of 1919 in front of what is believed to be the shipyard's dining hall. The unidentified woman in dark dress and white collar in back row may be the supervisor. The massive $1,000,000 shipbuilding plant, covering a 30-block area located around 100 Alexander Avenue, required many workers in all categories. Known formally as the Todd Dry Dock & Construction Corp., the shipyard provided a company hotel with room for over 600 men, a large dining facility, and began building modest homes for sale to shipyard employees in 1919. G33.1-132


Todd Dry Dock & Construction Corp. (Tacoma); Employee eating facilities--Tacoma; Restaurant workers--Tacoma--1910-1920;

BOLAND-B1608

Interior of a section of the Tacoma Smelter taken in March of 1919. This was the copper refinery. Copper anodes from the smelter were inserted between copper cathodes in a copper-sulfuric acid bath. Copper was transferred from the anode to the cathode. The two raised frameworks in the photograph's middle were stands for "slapping copper starter sheets" before they were inserted into the bath as cathodes. The American Smelting & Refining Co., better known by its acronym, ASARCO, was a major employer in Ruston for nearly a hundred years. G32.1-023 (Additional information provided by a reader)


American Smelting & Refining Co. (Tacoma); Smelters--Tacoma; Industrial facilities--Tacoma;

BOLAND-B1617

Daily operations at Todd Shipyards as photographed in March of 1919. Todd Dry Dock & Construction Corporation had bought land along Commencement Bay in 1917 and built a modern shipyard. They delivered eleven cargo ships in 1919. TPL-1526; G37.1-176 (www.shipbuildinghistory.com/history/shipyards/2large/inactive/toddtacoma.htm--list of ships built)


Todd Dry Dock & Construction Corp. (Tacoma); Boat & ship industry--Tacoma--1910-1920;

BOLAND-B1797

Jacona at dock. The 7,600-ton freighter "Jacona" had been launched on November 20, 1918 by Todd Dry Dock & Construction Co. and delivered to her owners on May 9, 1919. Later in 1930 she was converted into a floating power generation station. TPL-1677


Boat & ship industry--Tacoma--1910-1920; Cargo ships--Tacoma--1910-1920;

BOLAND-B2221

Log on shute. This log on a shute at an unidentified sawmill was photographed in mid-August of 1919. TPL-8085; G36.1-015


Logs;

BOLAND-B2240

An early logging truck, used by Wilson Logging Co. to bring in logs, was photographed in August of 1919. The early motor trucks offered an economical alternative to railway logging. Despite the cost of constructing roads, the trucks were a cheaper, faster and more practical way to move the logs. They were a common sight by the 1920s. They usually were underpowered, had an open cab and hard rubber tires, but they could go places that locomotives could not. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-032 (website for the Museum at Campbell River www.crmuseum.ca\exhibits)


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B2242

Although motorized logging trucks were becoming more common in the lumber industry, horses were still being used in August of 1919. A pair of horses are pictured above at an unidentified sawmill waiting patiently as planks are being loaded onto an open cart. Photograph ordered by the Wilson Logging Co. TPL-6636 G36.1-052


Logging industry--1910-1920; Wilson Logging Co.;

BOLAND-B2235

Side view of logging equipment on wheels belonging to the Wilson Logging Co. Photograph taken at unidentified location on August 23, 1919. TPL-9852 ; G36.1-032


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B2236

In August of 1919, a steam donkey mounted on a sled was photographed loaded on a truck for ease in transport to a logging site. Only the sled itself, built from huge logs, is clearly visible. The cable and winch on the donkey could be used to help load and unload it from the truck. This photograph was ordered by the Wilson Logging Co. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-082


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B2522

Extended view of St. Paul & Tacoma Lumber Co. planing mill and "monorail" as pictured in November of 1919. This may be the aerial tramway constructed to transport lumber from dry kilns to various other parts of the plant, replacing the old horse-and-truck system. St. Paul & Tacoma were putting in improvements to their sawmill on the Tideflats totaling nearly half-a-million dollars. Two new dry kilns were being built as well as an aerial tramway. The improvements were expected to reduce the cost of plant operation. St. Paul & Tacoma employed about 800 men at the time including a considerable night shift. G36.1-155 (T.Times 8-22-19, p. 12-article; TDL 7-19-20, p. 6-article)


Lumber industry--Tacoma--1910-1920; St. Paul & Tacoma Lumber Co. (Tacoma);

BOLAND-B2540

St. Paul & Tacoma Lumber Co. yard as photographed on November 24, 1919. As reported in the August 22, 1919, Tacoma Times newspaper, St. Paul & Tacoma Lumber was spending nearly $500,000 in improvements to its sawmill on the Tideflats. An aerial tramway was constructed to carry lumber from dry kilns to other parts of the plant. This would facilitate handling of lumber in the mill. The company was established in 1888 and provided steady employment for many residents for decades. It would merge with St. Regis Paper Co. in 1957. G36.1-083 (T.Times 8-22-1919, p. 12-article)


St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1910-1920;

D167852-B

ca. 1920. Copy of Asahel Curtis print #51689 requested by the Washington State Historical Society on June 1, 1977. View of unidentified male and female along side of train. The couple are wearing railroad caps. The man is wearing a white shirt and striped tie under his somewhat soiled uniform.


Railroad locomotives; Clothing & dress--1920-1930;

WO 167676-A

ca. 1920. Chicago, Milwaukee and St. Paul Railroad, Engine #10253. This is an Asahel Curtis print, #46216, which was requested copied by the Washington State Historical Society on April 1, 1977. Three men are standing next to the electric powered engine, spaced far apart, with the man in the foreground seemingly prepared to give the "go ahead" signal. Photographer Curtis documented industry in Washington State as well as historic events and geographic features. He was based in Seattle and worked there until his death in 1941. 60,000 of his images are held in trust by the Washington State Historical Society. (www.wshs.org/wshm/online-exhibits/curtis/exhibitb.htm)


Railroad locomotives; Railroad cars; Chicago, Milwaukee & St. Paul Railroad Co.; Railroads;

D167852-A

ca. 1920. Chicago, Milwaukee and St. Paul Railroad, Engine #10254. Copy of Asahel Curtis print #52236 requested by the Washington State Historical Society on June 1, 1977. The electric powered train pauses on the tracks circa 1920. This is one of the 60,000 Asahel Curtis images in the Washington State Historical Society collection.


Railroad locomotives; Railroads; Railroad tracks; Chicago, Milwaukee & St. Paul Railroad Co.;

Results 31 to 60 of 3117