Shartle Brothers Machinery. A specialized form seen from one side, the form decreases in size from the top to a cylinder at the lower edge of the floor. Pulleys are seen on the left and a hose is connected to the form on the right.

Machinery;

New machinery at Titus Manufacturing Company, Mr. Leon Titus. A young workman is steam cleaning the bare block of a Ford "flathead" V8 engine at Titus Manufacturing Company engine rebuilding shop.

Machine Shops--Tacoma--1940-1950; Titus Manufacturing Co. (Tacoma)--Employees; Engines; Automobile equipment & supplies; Vehicle maintenance & repair--Tacoma--1940-1950;

Northwest Syndicate Inc. was an electrical equipment manufacturing company located at 1321 A Street in downtown Tacoma. George F. Russell was the company's President and Julius W. Mann was the Vice-President. View of men looking at a 15 foot long by 5 foot high machine at Northwest Syndicate Inc. facilities; photo ordered by B. F. Goodrich Company in Seattle, Washington.

Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Laborers--Tacoma; Northwest Syndicate, Inc. (Tacoma);

Dravis Engineering and Machine Works was formerly Hicks-Bull Machine Company, Incorporated; the company was originall established in 1912. Dravis had licensed mechanical engineers and specialized in engineering, surveying, marine and general machinery manufacturing and repairs. The Dravis Company was owned by Frederick and Virginia Dravis; they were located at 1101-07 Dock Street. View of unidentified man demonstrating the use of a newly manufactured machine.

Machinery industry--Tacoma; Machinery; Equipment; Business enterprises--Tacoma; Dravis Engineering & Machine Works (Tacoma);

There are printed instructions on the Bausch & Lomb machine that show a technician how to measure "Printing opacity" and "Opacity". He is looking at a small negative or picture with a magnifying glass. Copies of prints are laying next to the machine. Photograph ordered by Merchandising Factors, Seattle.

Machinery; Hand lenses; Testing; Merchandising Factors, Inc. (Seattle);

I. W. Johnson Engineering were well known specialists in the designing and building of sawmill machinery. In 1938 they designed and built the innovative sawdust making machine. View of sawmill designed, built and manufactured at the I. W. Johnson plant.

Machinery industry--Tacoma--1940-1950; Machinery; Engineering models; Equipment; Saws; I.W. Johnson Engineering Co. (Tacoma);

Interior view of Tacoma plant with General Electric Company machinery.

Machinery;

New machinery at Titus Manufacturing Company, Mr. Leon Titus. A workman is bench testing one of the rebuilt Ford "flathead" V8 engines.

Machine Shops--Tacoma--1940-1950; Titus Manufacturing Co. (Tacoma)--Employees; Engines; Automobile equipment & supplies; Vehicle maintenance & repair--Tacoma--1940-1950;

New machinery at Titus Manufacturing Company, Mr. Leon Titus. A workman is installing camshafts or honing camshaft housing during rebuilding of Ford "flathead" V8 engines.

Machine Shops--Tacoma--1940-1950; Titus Manufacturing Co. (Tacoma)--Employees; Engines; Vehicle maintenance & repair--Tacoma--1940-1950; Mechanics (Persons)--Tacoma--1940-1950; Assembly-line methods--Tacoma--1940-1950;

New machinery at Titus Manufacturing Company, Mr. Leon Titus. A workman at the machine shop is assembling rebuilt Ford "flathead" V8 engines. He is measuring one of the moving parts with calipers. Bins of parts are conveniently located behind him.

Machine Shops--Tacoma--1940-1950; Titus Manufacturing Co. (Tacoma)--Employees; Engines; Vehicle maintenance & repair--Tacoma--1940-1950; Mechanics (Persons)--Tacoma--1940-1950; Assembly-line methods--Tacoma--1940-1950;

South Tacoma Welding and Equipment Company was owned by Nick Bosko Jr. and Luke J. Caraway. The company was located in the south Tacoma district at 7047 South Tacoma Way; this facility was built in 1946 by Nick Bosko Jr. Exterior view of South Tacoma Welding and Equipment Company facilities, view of a recently constructed logging arch.

Machinery industry--Tacoma--1940-1950; Machinery; Industrial facilities--Tacoma; Trailers--Tacoma; Welding--Tacoma; South Tacoma Welding & Equipment Co. (Tacoma);

New plant,Titus Manufacturing Company, Center & Lawrence, Leon Titus. Rows of rebuilt Ford "flathead" V8 engines are awaiting shipment. A workman is loading one on a cart with an overhead winch. Tools, parts and supplies are shown in the factory area in the background.

Machine Shops--Tacoma--1940-1950; Engines; Titus Manufacturing Co. (Tacoma)--Employees;

Two unidentified men are assembling carburetors in the rebuilding shop at TAM Engineering Corporation on October 20, 1952. Ben Christel has been identified as the employee seated on the test bench at far left. He has his sleeves rolled up. (Identification provided by a reader)

Machine shops--Tacoma; TAM Engineering Corp. (Tacoma); Christel, Ben;

Exposure of wood working equipment for auction at Wheeler-Osgood Sash & Door Co. liquidation. The door and plywood plant in Tacoma was sold for approximately $650, 000 for the purposes of liquidation. The factory opened in 1889, and went out of business in 1952. During the interim, the company was one of the largest door plants in the world and an important part of Tacoma's lumber manufacturing industry. The building itself burned down in July of 1959. (TNT 2-26-1952, pg. 1)

Machinery; Wheeler, Osgood Co. (Tacoma); Factories--Tacoma--1950-1960; Lumber industry--Tacoma--1950-1960;

Views of the plant at Hudson Machinery Company, Inc. Hudson Machinery were dealers in machinery located at Townsend at Minneapolis, Tacoma Tideflats. Frank C. Hamprecht was president and Walter E. Liggett was secretary-treasurer. A unidentified man poses beside shelves filled with parts and a center cabinet filled with drill rods.

Hudson Machinery Company, Inc. (Tacoma); Warehouses--Tacoma--1950-1960; Machinery; Machinery Industry--Tacoma--1950-1960;

Globe Machine personnel have gathered for a group portrait in front of the facility. Most of the men wear overalls or coveralls. The company manufactured machinery for veneer, plywood and wood-working purposes.

Machinery industry--Tacoma--1950-1960; Machinery; Globe Machine Manufacturing Co. (Tacoma)--People;

The interior of Globe Machine Manufacturing Company showing men at work at various machines. The company advertised as manufacturers of veneer, plywood and woodworking machinery.

Machinery industry--Tacoma--1950-1960; Machinery; Globe Machine Manufacturing Co. (Tacoma);

A "Shim Sizer" manufactured by Globe Machine Manufacturing Company, Inc.

Machinery industry--Tacoma--1950-1960; Machinery; Globe Machine Manufacturing Co. (Tacoma);

ca. 1927. Rowland Valve Company, Seattle, machinery department. View of machines with belts and pullys. (filed with Argentum)

Machinery; Rowland Valve Co. (Seattle);

ca. 1926. A piece of machinery manufactured by the Rowland Valve Company, Seattle, Washington. (WSHS)

Machinery; Rowland Valve Co. (Seattle);

ca. 1926. Rowland Valve Co., Seattle, Wa. (WSHS)

Machinery; Rowland Valve Co. (Seattle);

ca. 1927. Rowland Valve Co. Machinery Dept., Seattle, Wa. (WSHS)

Machinery; Rowland Valve Co. (Seattle);

ca. 1927. Rowland Valve Company, Seattle, machinery department. View of machine shop with three men in suits. (filed with Argentum)

Machinery; Rowland Valve Co. (Seattle);

This photograph from February, 1950, shows part of the engine rebuilding shop at TAM Engineering Corp, 3033 So. Lawrence St. Four workmen are assembling and bench testing rebuilt Ford "flathead" V8 engines. The TAM plant was the most modern Ford Authorized engine rebuilding plant in the Pacific Northwest. By 1950, they had already rebuilt over 50,000 engines and small parts for dealers in the Pacific Northwest and Alaska. TAM Engineering Corp. was acquired by the Oklahoma City-based firm, Autocraft Industries, in 1995. (TNT 2-14-1950, A-4) TPL-8482

Machine shops--Tacoma; TAM Engineering Corp. (Tacoma);

A glue machine manufactured by Globe Machine. Its dimensions are 12' x 6' x 2'.

Machinery industry--Tacoma; Machinery; Equipment; Globe Machine Manufacturing Co. (Tacoma);

Exposure of wood working equipment for auction at Wheeler-Osgood Sash & Door Co. liquidation. The company was once known as the world's largest manufacturer of wooden doors. The door making factory opened in 1889 and went out of business in 1952. In later years, the company was plagued by labor troubles and reorganizations and was finally closed by a strike the fall prior to its liquidation sale. The building itself burned down in July of 1959. (TNT 2-26-1952, pg. 1)

Machinery; Wheeler, Osgood Co. (Tacoma); Factories--Tacoma--1950-1960; Lumber industry--Tacoma--1950-1960;

Exposure of wood working equipment for auction at Wheeler-Osgood Sash & Door Co. liquidation. The big plant on Saint Paul Ave, at one time the world's largest manufacturer of doors, was sold in Sept. by decision of the stockholders to interests represented by two attorneys, Archie Blair of Tacoma & J.A. Pritzker of Chicago. The sale included not only the Tacoma plant, but its interest in Myrtle Creek, Ore. and San Francisco. In October, Paul W. Billings was elected President of the company and authorized to complete the sale and accumulate funds for stockholders, at a reported ratio of $14.00 per share. (TNT 2-26-1952, pg. 1)

Machinery; Wheeler, Osgood Co. (Tacoma); Factories--Tacoma--1950-1960; Lumber industry--Tacoma--1950-1960;

exposure of oil burner screen, for Standard Oil

Machinery; Screens--Tacoma--1950-1960;

View of taping machine manufactured by Globe Machine; photograph ordered by Earl Sutton. Globe Machine Manufacturing Co. were manufacturers of veneer, plywood and woodworking machinery. The company was located at 301 East 11th Street. According to the 1951 City Directory, Calvin D. Bamford was listed as Secretary-Treasurer of the firm. He was listed as president by the time of the 1953 City Directory. The firm was listed in the City Directory from 1929 to 1988.

Machinery industry--Tacoma; Machinery; Equipment; Globe Machine Manufacturing Co. (Tacoma); Bamford, Calvin D.;

Views of the plant at Hudson Machinery Company, Inc. Hudson Machinery were dealers in machinery located at Townsend at Minneapolis, Tacoma Tideflats. Frank C. Hamprecht was president and Walter E. Liggett was secretary-treasurer.Long metal rods occupy most of this picture with rolled up chains lying to the right.

Hudson Machinery Company, Inc. (Tacoma); Warehouses--Tacoma--1950-1960; Machinery; Machinery Industry--Tacoma--1950-1960;