A man, possibly Don Jaenicke, gives his shoes a high glossy shine as he has one foot on a plywood step containing an Esquire shoe shine kit. Cans of polish and a towel can be tucked away inside the plywood container and the container itself be stored in a closet. A convenient shoe rack is already in this Sylvan Park closet and space could be found for the shoe shine device as well. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Shoe shining--Tacoma; Shoes; Douglas Fir Plywood Association (Tacoma);
Plywood is being laid on this large roof in a May 16, 1958, photograph. One worker is observed with his back to the camera; he is standing on a portion of the roof which has a plywood sheet partially covering it. Long planks of wood are placed horizontally over the roofline. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Building construction; Douglas Fir Plywood Association (Tacoma);
Members of Douglas Fir Plywood Association chuckle over results of the golf tournament held as part of their 22nd annual meeting in June, 1958. It may be that one player has lost a wager; he is shown with a dollar bill in his hand. The D.F.P.A. met in Gearhart, Oregon, that year. Photograph ordered by Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Golf--Oregon--Gearhart;
Two members of Douglas Fir Plywood Association appear to be discussing the merits of a golf club in early June, 1958. The Association was holding its 22nd annual meeting, that year in Gearhart, Oregon, with a golf tournament as part of the activities. New officers of the association would be elected during the three-day conference. Photograph ordered by Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Golf--Oregon--Gearhart; Golfers--Oregon--Gearhart;
The figure of a logger is starkly outlined in black as he descends a spar pole. His steel tipped shoes assist in keeping himself steady. The belt circling the pole is used to keep him from falling. The spar pole has multiple cables that are used for yarding logs from surrounding strands of trees. This photograph was taken on September 12, 1958, in Port McNeil, British Columbia. Photograph ordered by Malcolm McGhie, industrial consultant.
Timber! A logger watches as a tall tree makes its slow descent to the ground in a September, 1958, photograph. Limbs may already have been pruned before the tree was toppled. Stumps and tree debris indicate that logging has already occurred in this area. Photograph ordered by Malcolm McGhie, industrial consultant. TPL-9430
Improved machinery helped workers in more efficient harvesting of designated logs. Cable lines attached to the rear of a bulldozer haul away two smaller logs. Another log waits its turn to be removed. The bulldozer would also serve as an earth remover to clear paths in the forest. Photograph ordered by Malcolm McGhie, industrial consultant. TPL-9429
Logging on the Olympic Peninsula, ordered by Malcolm McGhie for Rayonier. In Washington during the late fifties, Rayonier Inc and its logging contractors would cut and haul more than 240,000,000 board feet of logs a year. Here logs are being moved from a logging truck to a railway car where they will be shipped to the company's mill over their own logging railway. A large wood frame holds a series of steel cord and grapplers that lift the logs, they then are moved by pulleys to the area over the railroad car and loaded. (Rayonier Annual Report for 1959)
Exposure of logging operation at St. Paul & Tacoma and St. Regis Paper Co.; photographs ordered by Malcolm McGhie. In a typical landing, a truck is being loaded with logs yarded from the surrounding area by the high lead system, using a "spar tree." St. Regis and St. Paul & Tacoma merged in 1957 with St. Regis becoming the parent company.
Lumber industry--Tacoma--1950-1960; Cutover lands; Logs; St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;
Exposure of logging operation at St. Paul & Tacoma and St. Regis Paper Co.; photographs ordered by Malcolm McGhie. A crane machine with a grappling arm is being used to load a logging truck. In the background is a "spar tree," also used for moving timber. TPL-8292
Lumber industry--Tacoma--1950-1960; Cutover lands; Logs; St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;
One man saw set up at St. Paul & Tacoma, Olympia, ordered by Globe Machinery Manufacturing Co. of Tacoma. Photograph shows "skinner end with tilt lift tilted." The saw was used for cutting sheets of plywood. Globe Machinery was founded in the early 1900s by Jesse Bamford, an English immigrant. In 1917, when his son Calvin Sr. took over the business, he focused specifically on designing and manufacturing machines for the developing forest products industry. The firm designed hundreds of machines for high efficiency veneer, plywood and board production. The address listed on their letterhead is 701 East "D" St. The company maintained a plant at 301 East 11th St. from 1929-1988.
St. Paul & Tacoma Lumber Co. (Olympia); Lumber industry--Olympia--1950-1960; Plywood; Machinery industry--Tacoma; Machinery; Equipment; Globe Machine Manufacturing Co. (Tacoma);
One man saw set up at St. Paul & Tacoma, Olympia, ordered by Globe Machinery Manufacturing Co. of Tacoma. The saw is used in plywood production. The plywood is moved on the conveyor belt to the left and one man can operate the machine using the electronic controls mounted to the right of the platform. Globe Manufacturing, founded in the early 1900s, designed and manufactured equipment for the veneer and plywood industry.
St. Paul & Tacoma Lumber Co. (Olympia); Lumber industry--Olympia--1950-1960; Plywood; Machinery industry--Tacoma; Machinery; Equipment; Globe Machine Manufacturing Co. (Tacoma);
Two workmen monitor testing on a piece of plywood at the Douglas Fir Plywood Association's test lab at 1214 A St in Tacoma. The DFPA had two labs, one in Tacoma and one in Eugene, to test and improve the plywood product. The machinery doing the testing is 8 feet wide and 15 feet high and is being operated by two men. It appears to be measuring the pressure on the plywood.
Douglas Fir Plywood Association (Tacoma); Plywood; Testing--Tacoma--1950-1960; Product inspection--Tacoma--1950-1960;
ca. 1959. Logging on the Olympic Peninsula, ordered by Malcolm McGhie for Rayonier Inc. A faller completes the undercut on a large cedar tree in the Crane Creek logging area. In Washington during the late 50's, Rayonier would cut and haul more than 240 million board feet of logs a year. TPL-9431
Lumber industry--Grays Harbor--1950-1960; Trees; Logs; Rayonier, Inc. (Grays Harbor);
Two men and their sedan are dwarfed by the towering timber in forests near Mineral on August 2, 1960. They were there to observe timber and logging operations of the St. Regis Paper Co. St. Regis had plants in both the United States and Canada, including a longtime location in Tacoma. This is a typical stand of old growth, mostly Douglas fir, which supplied the company's pulp and paper mill, sawmill and plywood plant operations in Tacoma. The Richards photograph above was used in St. Regis' 1960 annual report. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (1960 Annual Report, p. 2)
Trees; Lumber industry--Tacoma--1960-1970; St. Regis Paper Co. (Mineral);
ca. 1960. Man stares at log probably retrieved from log pond below in this ca. 1960 photograph. The outer bark appears to have been shredded in spots. Another man is maneuvering a log in the pond with a long pole.
A 12' log rests on the floor of Puget Sound Plywood Corporation's plant in December, 1960, as a much smaller log, with the help of chains and a winch, is being deposited behind it. An employee of the cooperative plywood company carefully maneuvers the log into position. Markings on the gigantic log indicate that the volume of the log is 2000 board feet. Photograph ordered by Douglas Fir Plywood Association.
Logs; Puget Sound Plywood, Inc. (Tacoma); Lumber industry--Tacoma--1960-1970; Cooperatives--Tacoma;
Rayonier logging operations at Sappho in July, 1961. Logs are being lowered by cable (wire rope) under the supervision of Rayonier employees. Photograph ordered by Bethlehem Pacific Coast Steel, Seattle.
Logs are being lowered via wire rope at Rayonier logging operations in Sappho in July, 1961. Steel lines are attached to the spar. Photograph ordered by Bethlehem Pacific Coast Steel Corp., Seattle.
Three car loads of "Red End Cheney Studs" are ready for transport on May 20, 1963. The lumber is stacked neatly on freight cars waiting on a railroad siding near the Texaco Tideflats service station on E. 11th St. Photograph ordered by Cheney Lumber Co.
Five unidentified men stand outside of a Weyerhaeuser Co. building believed to be part of their warehouse operations on September 23, 1963. Weyerhaeuser may have furnished the wood for production of plywood Santas in time for the Christmas season. Photograph ordered by Cole & Weber Advertising.
A man is photographed on March 3, 1964, studiously perusing a Drop-in Art sheet from the Weyerhaeuser Registered Home Advertising Service. Besides the Drop-in Art sheets, proof & tear sheets, Weyerhaeuser ads, home designs, and art pages were available along with the large Advertising Catalog. Photograph ordered by the Weyerhaeuser Co.
Man in hard hat inspects stacked logs that have labeled in this July, 1964, photograph. The logs are more than twice his height. It was possibly taken in the Olympic Peninsula since other photographs were taken in the Grays Harbor area roughly the same time for Malcolm McGhie, industrial consultant from New York.
Rayonier, Inc., timber industry scenes from Grays Harbor. A long lineup of trucks loaded with logs prepare to leave this logging site for a mill or paper plant in July, 1964. Next to the trucks are railroad tracks with open cars with massive logs strapped down. One man is shown in the foreground making sure the loads are securely fastened. Photograph ordered by Malcolm McGhie, industrial consultant, New York.
Lumber industry--Grays Harbor--1960-1970; Logs; Rayonier, Inc. (Grays Harbor);
Rayonier, Inc., timber industry scenes, Grays Harbor. A portable spar pole is rigged for yarding trees during Rayonier, Inc., logging operations in Grays Harbor. It was used instead of a wood spar tree. This July, 1964, photograph was probably taken in the midst of Rayonier's enormous tree farm. Photograph ordered by Malcolm McGhie, industrial consultant, New York.
Lumber industry--Grays Harbor--1960-1970; Rayonier, Inc. (Grays Harbor);
July, 1964, Rayonier, Inc., timber industry scenes. Ordered by Malcolm McGhie, industrial consultant, New York. Man in hard hat examines carefully leaves of a young tree found in a cluster of similar trees. Note the size difference between these trees and the towering firs in the background. This photograph was possibly taken in Rayonier, Inc.'s large tree farm in Grays Harbor.
Lumber industry--Grays Harbor--1960-1970; Rayonier, Inc. (Grays Harbor); Trees;
Logging operation scenes from Rayonier, Inc., Grays Harbor. Workers are supervising the hoisting of large logs onto open railroad cars. Once properly situated, the metal chains across the logs will be tightened to prevent slipping. Photograph ordered by Malcolm McGhie, industrial consultant, New York.
Lumber industry--Grays Harbor--1960-1970; Rayonier, Inc. (Grays Harbor); Hoisting machinery; Logs;
Rayonier, Inc., timber industry scenes, Grays Harbor. Logs are being hoisted onto open railroad cars as Rayonier, Inc., employees gather to watch in July, 1964. This activity probably occurred at Rayonier's large tree farm in Grays Harbor. Photograph ordered by Malcolm McGhie, industrial consultant, New York.
Lumber industry--Grays Harbor--1960-1970; Rayonier, Inc. (Grays Harbor); Hoisting machinery; Logs;
Rayonier, Inc., timber industry scenes, Grays Harbor, taken on behalf of Malcolm McGhie, industrial consultant, New York. Old-growth timber from possibly the Rayonier, Inc., tree farm site in Grays Harbor is being carefully loaded onto a heavy duty logging truck in July, 1964. A man in hard hat is crouching on top of the truck to guide the placement of the log.
Lumber industry--Grays Harbor--1960-1970; Rayonier, Inc. (Grays Harbor); Hoisting machinery;
Scenes from Potlatch Forests, Inc., pulp and paper operations, Lewiston, Idaho. Aerial view of what is probably the massive Potlatch Forests, Inc., plant in Lewiston, Idaho, taken in late September-early October, 1964. Plant operations were situated in what appears to be a sparsely populated area. Potlatch products could be conveyed by water, road, and railroad to customers nationwide. Photograph ordered by Malcolm McGhie, industrial consultant, New York, for inclusion in the company's annual report.
Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970; Industrial facilities--Idaho; Aerial photographs;
