For Bethlehem Pacific Coast Steel Corporation, 20th and Illinois Street, San Francisco, CA. Dramatic image of completed steelwork at new Weyerhauser pulp mill, Longview, WA, taken in September of 1951. L- shaped building with large crane in yard near small wood buildings.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Building construction--Longview; Hoisting machinery;

View of Weyerhaeuser pulp mill. A Weyerhaeuser employee stands by the fifth steel beam in the new portion of the Longview pulp mill in September, 1951. Interior view of completed steelwork, looking down the length of the building. Photograph ordered by Bethlehem Pacific Coast Steel Corporation, San Francisco.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Bethlehem Pacific Coast Steel Corp. (San Francisco);

The interior of one of the classrooms at Lowell School showing the visual aid furniture. Elementary school students sit on the floor to watch while a young teacher displays paintings from an easel made of plywood. Artwork is also displayed on the wall behind the easel. Ordered by Douglas Fir Plywood Association. TPL-8334

Douglas Fir Plywood Association (Tacoma); Lowell Elementary School (Tacoma); Classrooms--Tacoma; School children--Tacoma--1950-1960; Public schools--Tacoma--1950-1960; Teachers--Tacoma--1950-1960; Easels;

Plyron wardrobe door in Belfoy-Smith Homes. Plyron was a newly developed material that was found to have good strength for cabinet doors, with a smooth surface that accepted paint well. Ordered by Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Closets--Tacoma;

Logging mill at Summit. Men working on-site with portable log sawing machinery. Cut logs and lumber, automobiles and truck in background. For Export Pacific, taken on November 23, 1951.

Lumber industry--1950-1960;

Mill at Summit. Part of a series taken on November 23, 1951 of lumber operations with portable log sawing machinery, lumber and logs on wooded site. For Export Pacific.

Lumber industry--1950-1960;

Mill at Summit. Truck loaded with milled lumber parked in cut-out area of logging site. Automobiles and pick-up truck in forested background. Part of a series of daily lumber operations taken on November 23, 1951 for Export Pacific.

Lumber industry--1950-1960; Trucks--1950-1960;

Mill at Summit. Two men working with portable log sawing machinery on wooded site in this photograph dated November 23, 1951. For Export Pacific.

Lumber industry--1950-1960;

Mill at Summit. Two men working with portable log sawing machinery on wooded site. Pile of sawdust in foreground. For Export Pacific. Photograph taken on November 23, 1951.

Lumber industry--1950-1960;

A young woman is seen using the film cabinets made from plywood at Central School. Shallow drawers hold small cans of film while larger motion picture cans are files on shelves behind her. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Central School (Tacoma); Audiovisual materials; Motion pictures;

Two men observing gages in humidity chamber of plywood laboratory at Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);

Two men observing mechanical equipment in humidity chamber of plywood laboratory at Douglas Fir Plywood Association. Line in upper left is deteriorating diacetate negative damage.

Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);

This unidentified young woman was busy cleaning and inspecting 16 mm films at Central School in November of 1951. She sat at a film winder within easy reach of film canisters on a rack made of plywood. Each film used in a classroom had to be cleared and checked for damage after each use. The rack has three deep shelves, the top two made with a deep V to hold the round film canisters upright, and rollers for easily moving the canisters from racks against the wall throughout the facility. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Central School (Tacoma); Audiovisual materials; Motion pictures;

Two men are sliding a panel with several strips of siding into the humidity chamber at the plywood lab while a third man is setting the control panel for the correct test conditions. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);

A view into the humidity chamber at the plywood lab shows the apparatus that provides the proper testing conditions. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);

Plywood display at Lakewood Country Store. Man examining "Handy Panels of Douglas Fir Plywood." Cans of paint, ladder in background. This photograph is nearly identical to D62562, image 5.

Plywood; Lakewood Country Store (Lakewood); Douglas Fir Plywood Association (Tacoma);

Men are checking the conditions in the humidity chamber at the Douglas Fir plywood lab. A plywood board is filled with dials and levers for controling the conditions while performing tests on new products. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);

Cold room constuction, Douglas Fir Plywood Association laboratory, Dave Countryman. Worker installing plywood panels on walls of foil insulated room on October 31, 1950.

Plywood; Douglas Fir Plywood Association (Tacoma);

Cold room constuction, Douglas Fir Plywood Association laboratory, Dave Countryman. Worker installing plywood panels on walls of foil insulated room on Halloween, 1950.

Plywood; Douglas Fir Plywood Association (Tacoma);

Plywood veneer production for Bellingham Plywood Company. Exterior type fir plywood panels for boats and other outdoor uses are fed into a giant hot press. Heat and pressure "cure" the phenolic resin adhesive, producing an irreversible bond between the plys stronger than the wood itself. By 1950, there were 67 plywood mills in operation producing 2,553,652,000 feet of plywood. ("The Plywood Age" by Robert M. Cour)

Plywood; Lumber industry--Bellingham--1950-1960;

Peeler log being rotated in a lathe and cut into veneer at Bellingham Plywood Company. In an effort to get the most from a stand of timber, select peeler logs are used in the production of plywood; less perfect logs are used for lumber. After barking, the peeler log is rotated in a lathe. The log "unwinds" against a knife in a continuous strip of veneer. The strips are then held temporarily in multi-decked storage trays 150 feet long or more. After the veneer has been sorted, a 150 foot steam heated oven brings its moisture content down to a uniformly low level. ("The Plywood Age" by Robert M. Cour)

Plywood; Lumber industry--Bellingham--1950-1960;

Plywood veneer production at the Bellingham Plywood Company. After the veneer is cut from the peeler log and the moisture content is regulated, the veneer is again graded. At the glue spreader, the cross-banding veneer is covered with an even coat of glue and sheets are assembled with alternate dry veneer in three, five and seven ply panels. Workers pictured above are building up the layers of plywood. Man to the far right is the glue machine operator, a highly skilled position. ("The Plywood Age" by Robert M. Cour)

Plywood; Lumber industry--Bellingham--1950-1960;

The inside of a wooden demonstration case contains wooden moldings strapped in place and ready for display. Case was photographed on January 9, 1951. Ordered by St. Paul and Tacoma Lumber, Corydon Wagner, Jr.

Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Showcases;

Two students play ping-pong in the Chapter Room at Kappa Sigma House. The walls have been covered with knotty-pine paneling. This fraternity became the first at the College of Puget Sound to employ a permanent house mother in 1950. Ordered by Douglas Fir Plywood Association, Tom Sias.

Douglas Fir Plywood Association (Tacoma); Table tennis--Tacoma; Students--Tacoma--1950-1960; Fraternities & sororities--Tacoma--1950-1960; College of Puget Sound (Tacoma)--1950-1960; Kappa Sigma (Tacoma);

The outside of a wooden demonstration case with a leather handle and metal clasps is shown. The lower corners have been protected with metal corners. A logo for St. Paul & Tacoma Lumber Co. has been painted on the side. Ordered by St. Paul and Tacoma Lumber, Corydon Wagner, Jr.

Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Showcases;

Plywood plant at Garibaldi, Oregon. This April 1, 1951, photograph shows sheets of veneer in the fine sanding process. Large pipes are for ventilation.

Plywood; Lumber industry--Oregon--1950-1960; Oregon-Washington Plywood Co. (Garibaldi, Or.);

Plywood plant at Garibaldi, Oregon. Exterior type fir plywood panels for boats and other outdoor uses are fed into a giant hot press. Heat and pressure "cure" the phenolic resin adhesive producing a irreversible bond between the plys stronger than the wood itself. One of the most important steps in plywood technology was the discovery in the 30's of a waterproof glue that made plywood resistant to extremes of temperature and moisture and a stronger product than the original wood. Exterior fir plywood with waterproof bond is tested by boiling for hours, drying and boiling again. Under the industry's quality control program, 500,000 random production line samples were tested annually in the manufacturers two labs. ("The Plywood Age" by Robert M. Cour")

Plywood; Lumber industry--Oregon--1950-1960; Oregon-Washington Plywood Co. (Garibaldi, Or.);

Peeler log at the plywood plant at Garibaldi, Oregon. Logs used to make plywood are called "peelers," reflecting the production process where a thin layer of wood called a veneer is peeled from the log on a massive lathe. Peeler logs are the best quality logs in the forrest. After the outside bark is removed, the peeler log is rotated in a lathe. The log rotates against a razor sharp knife, peeling a continuous sheet of thin veneer. The veneer is held temporarily in multi-decked storage trays 150 feet long or more. ("The Plywood Age" by Robert M. Cour)

Plywood; Lumber industry--Oregon--1950-1960; Oregon-Washington Plywood Co. (Garibaldi);

Temporary multi-deck storage racks at plywood plant at Garibaldi, Oregon. Note conveyor belt on racks; each rack had a conveyor belt on which the thin veneer from the peelers was laid. Workers would feed veneer onto each shelf. As each rack was filled, it would be shifted so that there was always an empty rack to fill.

Plywood; Lumber industry--Oregon--1950-1960; Oregon-Washington Plywood Co. (Garibaldi, Or.);

Finished plywood goes out for shipment by truck from the plywood plant at Garibaldi, Oregon. All plywood is carefully inspected and graded to national standards, marked as to quality and carefully packaged for shipment. In the fifties, the fir plywood industry ranked among the most important in the Pacific Northwest. In Oregon, Washington and the northern part of California, the Douglas fir grew and provided a livelihood for many thousands. The best of this fir was taken to more than 100 mills in these states and peeled into veneer from which plywood is made. Fir plywood panels were called "America's busiest building material" and business boomed after World War II.

Plywood; Lumber industry--Oregon--1950-1960; Oregon-Washington Plywood Co. (Garibaldi);