St. Regis' first mill was located in Deferiet, New York; they now had paper and pulp mills located throughout the world. Interior view of the Tacoma St. Regis plant, an unidentified man is working with recently installed equipment. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis began producing paper in the Tacoma plant in January 1949; view of the new high speed kraft paper machine that is designed to operate at 2,000 feet per minute and produce paper nearly fourteen feet wide. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

Two workers are pictured unloading a roll of Kraft paper to join others already stored in St. Regis' paper storage room. St. Regis had began producing paper in January of 1949 as it used the most modern equipment available at the time to convert liquid pulp into heavy multiwall Kraft paper. The plant was able to produce about 240 tons of multiwall bag paper per day.

Paper industry--Tacoma--1940-1950; Paper; Hoisting machinery; Machinery; Equipment; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis is one of the pulp and paper companies that carry the paper producing cycle all the way from wood, to pulp, to paper, and into other various products. View of unidentified worker sitting in an operating booth, he is likely in the area where logs are kept prior to the wood chipping process.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Logs; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

The pulp capacity at Tacoma has been planned so that this mill can make adequate quantities of bleached sulphate pulp available to the market, and at the same time supply the necessary bleached and unbleached sulphate pulp for its new high producing Kraft paper machine. Aerial view of St. Regis plant, located in Tacoma's tideflats area.

Paper industry--Tacoma--1940-1950; Aerial photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Tacoma's St. Regis plant has been extremely busy since the end of World War II. The pulp plant has been modernized and a paper mill has been added; these combined improvements strengthen the company's position in pulp, Kraft paper, Kraft board and multiwall bags. Aerial view of St. Regis plant, located in Tacoma's tideflats area.

Paper industry--Tacoma--1940-1950; Aerial photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis has been expanding and improving their facilities and plants throughout the world based on research being conducted in their Research and Development Departments. The company's laboratories are ranked among the highest in the paper and pulp industry. View of unidentified men in research and testing area in Tacoma's St. Regis plant in this photograph dated January 21, 1949. (S4)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

The St. Regis laboratories were conducting various types of research related to the pulp and paper industry. In 1949, they were focusing in an extensive program connected with pulping, new paper coatings, and new paper products. The laboratories helped maintain high levels of quality control. View of unidentified men in research and testing area at Tacoma's St. Regis plant. (S5)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

The Tacoma plant was producing both bleached and unbleached Kraft paper. This plant was able to supply its own pulp from the local mill, therefore making St. Regis-Tacoma very important in the paper industry. Interior view of Tacoma's St. Regis plant, wood chips are being processed prior to the Kraft paper production.

Paper industry--Tacoma--1940-1950; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

In 1949 St. Regis ranked among the top companies in the paper and pulp industry. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma--1940-1950; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis was able to broaden their range of products and increase production capacity by enlarging their Tacoma plant and beginning the production of kraft paper. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis Paper Company was organized in 1899, they began manufacturing paper in New York in 1901. Interior view of St. Regis paper mill in Tacoma, seven rolls of paper are lined up, one roll is being moved by an Ederer manufactured crane. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis had started producing kraft paper in January 1949, the tacoma plant had been remodeled over a long period of time and was operating at full capacity. View of St. Regis Paper Company Kraft Pulp Division; new mill on left, new laboratory is currently under construction; building contractor is Howard S. Wright and Company (T. Times, 3/13/49, p. 19).

Industrial facilities--Tacoma; Remodeling--Tacoma; Paper industry--Tacoma--1940-1950; Building construction--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis paper plant in Tacoma is the focal point of the company's expanding pulp, paper and multiwall bag operations in the West Coast. The paper mill was recently completed and is one of the largest and most modern plants in the United States. The new paper producing mill is now able to mass produce paper and offer their customers their quality product in higher volumes and lower prices. Workmen are using an "Ederer" crane to move an enormous roll of paper.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. Tacoma's St.Regis plant would have their own research laboratory within the industrial site. Interior view of plant, paper roll is being moved by a large "Ederer" crane.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

One of the employees at St. Regis Paper Company records information from a printout at one of the machines in the plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.

St. Regis Paper Co. (Tacoma)--People; Paper industry--Tacoma--1940-1950;

An employee at St. Regis watches to be sure all goes well in the wet pulp to paper process in the new kraft paper plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

St. Regis Paper Company dominated the Tacoma Tideflats with their ever expanding facilities at the terminus of the Puyallup Waterway. Taken from the top of the water tank. Ordered by St. Regis Paper Co., Mr. J.H. McCarthy.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;

Chip feeder at St. Regis plant, Link Belt Company, Mr. R.W. Johnson. Bark was first removed from logs and moved to the woodroom. From the woodroom chunks of wood were moved to wood chippers where they were broken into fine chips. These went into a hopper in the top of a digester where the chips were broken down by chemicals and the resulting pulp was washed and bleached. This large, funnel-shaped machine handled the fine chipping and delivery to the digester.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

St. Regis had been expanding their facilities for many years, the company had added new buildings and had recently begun the mass production of paper in Tacoma. St. Regis began producing paper in January 1949; the paper mill was converting the liquid pulp into heavy multiwall Kraft paper, using the most modern equipment available. Interior view of plant and new roll grinding machine.

Paper industry--Tacoma--1940-1950; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Progress photograph of steelwork at St. Regis Paper Company. The new multiwall bag plant, adjoining the paper mill, was to replace a leased plant at Seattle. The plant was expected to be in operation before April 1, 1952. It would employ approximately 400 people, including a large percentage of women. (St. Regis Annual Report 1951)

Paper industry--Tacoma--1950-1960; Progress photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960; Building construction--Tacoma--1950-1960;

Dexter's Machine at St. Regis Paper Company. During 1950 the pulp mill at Tacoma was expanded. St. Regis made kraft paper at six mills with a combined capacity of approximately 360,000 tons a year. Ordered by Bird Machine Company, South Walpole, Massachusetts, Mr. V. Fahlgren.

Paper industry--Tacoma--1950-1960; Machinery; Industrial facilities--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960;

Stand-by crane at St. Regis. This crane, manufactured by Ederer Engineering in Seattle, is able to move loads up and down nearly two stories inside this tall building along a horizontal trolly near the roof line of the building.

Paper industry--Tacoma--1950-1960; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960;

Construction continues on new buildings at the St. Regis Paper Company on Portland Avenue. Still in its early stages in August, 1951, the new buildings have been mapped out with low walls but as the mounds of dirt indicate, no flooring is in place. St. Regis was nearing completion of its eight year expansion plan; this structure is probably the multiwall bag plant which was completed in 1952. Anticipated to add an additional 400 workers to the St. Regis payroll, the new plant, constructed of steel and concrete, would be used for the production of industrial-use bags for cement, fertilizer, and other heavy-duty items. Hooker Electrochemical's tank cars can be seen in the background close to the St. Regis water tower.

Progress photographs; St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Factories--Tacoma--1950-1960;

Another machine, a large roller type machine, is used to strip bark from logs at the St. Regis Paper plant. At the end of 1951, St. Regis reached a point where it was able to supply from its own operations virtually all of the sulphate pulp requirements, both bleached and unbleached, of its kraft paper mills. St. Regis had been experimenting at its Tacoma mill in manufacturing kraft pulp from clean waste wood chips and in 1951 was making use of this material on a considerable scale in production. (St. Regis Paper Co. 1951 Annual Report)

Paper industry--Tacoma--1950-1960; Mechanical systems--Tacoma; Machinery; St. Regis Paper Co. (Tacoma)--1950-1960;

Two men are at work at a barking machine at the St. Regis Paper Company. One man is checking the logs while the other handles the controls. The pulp mill at Tacoma was being expanded in 1950 and was expected to be completed in 1951. During 1950 St. Regis was preparing to participate in the national defense program by supplying its regular products in larger quantities for many uses related directly or indirectly to military preparations. Multi-wall bags were used for shipment of essential materials. St. Regis bags had a greater value overseas because of special papers developed to resist moisture and contamination, such as polyethylene-coated kraft paper, for which production capacity was tripled in 1940. (1950 St. Regis Paper Co. Annual Report)

Paper industry--Tacoma--1950-1960; Mechanical systems--Tacoma; Machinery; St. Regis Paper Co. (Tacoma)--1950-1960;

An elevated view of the hydraulic barking process in the wood room at the St. Regis Paper plant shows unbarked logs in the background just received from the log storage pond. Logs then pass through the hydraulic barker under 1,400-pound pressure from jets of water stripping the logs in a matter of seconds. A man is seen near the center of the photograph using a tool to remove a rough spot from the log where a limb protruded. The cleanly barked logs will move on at once to the chipper where the log will be cut into chips 3/4 inch long and 1/8 inch thick, ready to be put into digesters. (TNT, 2/17/1952; St. Regis Paper Co. 1951 Annual Report)

Paper industry--Tacoma--1950-1960; Mechanical systems--Tacoma; Machinery; St. Regis Paper Co. (Tacoma)--1950-1960;

A driver is leaning on the cab of a truck from Veneer Chip Transport waiting his turn to unload chips at St. Regis Paper Company's new chip receiving station, completed in 1951. In Tacoma's fiber conservation program, an increasing percentage of the sulphate pulp is manufactured from chips made out of waste wood formerly burned at local wood-using plants. A big 12-ton hoist is upending the detached carrier bed of another truck at a 58 degree tilt to unload wood chips quickly. This equipment unloads three cars an hour. (St. Regis Paper Co. 1951 Annual Report)

Paper industry--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960; Trucks--Tacoma--1950-1960; Veneer Chip Transport (Tacoma);

A view of trucks and the 12-ton hoist used to dump full loads of wood chips at the St. Regis Paper plant. The chips flow by gravity onto a conveyor belt into piles that stand 60 feet into the air by means of an elaborate four-way pneumatic system. Moving the mountains of chips had been systemized into a push-button operation to deliver chips onto the correct pile according to species of wood, pine, white fir, hemlock or Douglas fir.

Paper industry--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960; Trucks--Tacoma--1950-1960; Veneer Chip Transport (Tacoma);

This elevated view of the St. Regis Paper Company yard shows the drive for trucks bringing wood chips to the pulp and paper mill at the mouth of the Puyallup River. A truck pulling a loaded trailer is seen at the left while a truck cab is seen backed up to a tall crane lifting a trailer to empty the chips into a chute. A truck cab pulling an empty trailer can be seen leaving the area in the middle of the photograph. Large silos (there are seven all together) seen on the right store wood ships for St. Regis' hungry pulp mill. Chips are transferred to the silos from outdoor piles before they go the digester.

Paper industry--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960; Trucks--Tacoma--1950-1960;