Large piece of equipment, the "Challoner 790", for auction at Wheeler Osgood factory liquidation. The door manufacturer closed its doors in 1952 and liquidated all assets. Certain former employees of the plant announced that they intended to form a co-operative to acquire and operate the factory, after the new owners announced their intention to liquidate. This move was opposed by the Lumber and Sawmill Worker's union and never came to fruition. Other companies that looked at the plant included Boeing, who were looking for a warehouse for its Seattle factory. The building was finally scheduled for demolition when no sale went through and burned down during the process in July of 1959. (TNT 2-26-1952, pg. 1)
Large desk with 2 swivel chairs behind it, 4 other chairs and a sofa. Exposures of office furniture for auction at Wheeler Osgood factory liquidation. Once the world's largest manufacturer of doors, the factory went out of business in 1952 and was sold for liquidation for approximately $650,000. The company suffered from labor troubles, reorganization and finally a strike by the Lumber and Sawmill Workers' union. (TNT 2-26-1952, pg. 1)
Elevated view of Tacoma Fire Station No. 16 under construction. Workers install roof sheathing by Douglas Fir Plywood Association. Narrows Bridge and old Highway 16 in background. Area just being developed. This $24,000 structure at 6th Ave and Meyer St. was dedicated on July 20, 1952. The 12 man crew and one engine provided fire protection to the Highlands district from Stevens St. to the Narrows bridge and also to University Place. This building was razed and replaced in 1999.
Plywood industry--Tacoma--1950-1960; Carpentry--Tacoma--1950-1960; Construction--Tacoma--1950-1960; Fire stations--Tacoma; Tacoma Fire Department, Fire Station No. 16 (Tacoma);
Exposure of "concentrated load test" at DFPA lab. Scientists measure results as several 50 pound weights, totaling 500 lb., are place on top of a circle of plywood. Random testing of the plywood produced in all mills provided quality control. Two laboratories, one in Tacoma and another in Eugene, conducted a continuing program of testing and research funded and supported by the industry itself.
Plywood industry--Tacoma--1950-1960; Testing; Experiments; Douglas Fir Plywood Association (Tacoma);
The Douglas Fir Plywood Association presented a display showing how plywood was used by several industries in the Northwest in the Washington Hall in Portland, Oregon. Washington Hall was part of an earlier exposition in Portland. The hall where the display was housed has been built with columns the look like the trunks of trees. Sky lights in the roof allow plenty of natural light into the interior of the large hall.
Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland;
The Douglas Fir Plywood Association presented a display showing how plywood was used by several industries in the Northwest including the boat and ship industry, heavy construction, home building and on farms.
Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland;
The Douglas Fir Plywood Association presented a display showing how plywood was made and some of its many uses in the Washington Hall in Portland, Oregon.
Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland;
Testing hardwood at the Plywood Research Foundation. Ordered by Douglas Fir Plywood Association.
Plywood Research Foundation (Tacoma); Plywood; Research facilities--Tacoma; Lumber industry--Tacoma--1950-1960; Laboratories--Tacoma--1950-1960; Douglas Fir Plywood Association (Tacoma); Product inspection--Tacoma; Testing--Tacoma;
A workman moves a stack of cartons of Wesco's sweet peas using a forklift in a large warehouse. The pallet supporting the cartons has been made using plywood. Cartons of StarKist tuna are stacked on the other side of the doorway. Ordered by Douglas Fir Plywood Association.
Plywood; Douglas Fir Plywood Association (Tacoma); Shipping--Tacoma--1950-1960;
Logging mill at Summit. Men working on-site with portable log sawing machinery. Cut logs and lumber, automobiles and truck in background. For Export Pacific, taken on November 23, 1951.
Mill at Summit. Part of a series taken on November 23, 1951 of lumber operations with portable log sawing machinery, lumber and logs on wooded site. For Export Pacific.
Two men observing gages in humidity chamber of plywood laboratory at Douglas Fir Plywood Association.
Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);
Two men observing mechanical equipment in humidity chamber of plywood laboratory at Douglas Fir Plywood Association. Line in upper left is deteriorating diacetate negative damage.
Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);
One of the final stages in plywood manufacture is setting the glued and layered sheets of wood veneers in a hot press as shown at Anacortes Veneer, Inc., Anacortes, Washington. A sheet of plywood is placed on each layer of the press and the stacks are placed under pressure for differing lengths of time depending on the type of plywood being manufactured. This produces an irreversible bond between the plys stronger than the wood itself. The press is open in this view showing the sheets of plywood. Ordered by Douglas Fir Plywood Association. (The Plywood Age, Robert M. Cour)
Anacortes Veneer, Inc. (Anacortes); Plywood; Douglas Fir Plywood Association (Tacoma);
On February 17,1941, a log from a great fir tree has been delivered to St. Paul & Tacoma Lumber Co. where it has been loaded on the carriage in the mill. The slab cut has been taken off and the saw is going into the log for the second cut. (T. Times 2/26/1941, pg. 13)
Lumber industry--Tacoma--1940-1950; St. Paul & Tacoma Lumber Co. (Tacoma); Logs; Saws;
On May 22, 1939, employees at the St. Paul & Tacoma Lumber Co. mill walked out, halting operations in support of their fellow striking employees at the logging camps. The workers at the camps had ceased work on May 15th. Employees at the mill walked out and filed formal charges of unfair labor practices against the company when they found out that officials planned to keep the mill running, processing logs from other sources. (T. Times 5/23/1939, pg. 3-article only)
Lumber industry--Tacoma--1930-1940; St. Paul & Tacoma Lumber Co. (Tacoma); Strikes--Tacoma--1930-1940;
Several unidentified members of Tacoma's Chamber of Commerce paid a visit to the Danish motorship "Tacoma" when she docked at the Defiance Lumber Mill on her maiden voyage January 14, 1927. They posed with members of the crew for this portrait. The "Tacoma" was built in Copenhagen for the Orient Steamship Company of Copenhagen. She was loading Northwest lumber enroute to Japan. She was 400 feet in length with a beam of 55 feet. She ran under the power of two diesel engines with a crew of 15 officers and 34 crewmen. (TNT 1/14/1927, pg. 20) (WSHS)
On the evening of June 15, 1942, the sawmill at the Henry Mill & Timber Co. was fully engulfed in flames. The fire department managed to save the planer plant, warehouse and offices, but the sawmill was a complete loss. The owners swore to rebuild immediately. However, after the fire, the company's business began to consist mostly of prefabricated items for the military. (T. Times 6/16/1942, pg. 1)
Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Fires--Tacoma--1940-1950;
On April 4, 1942, after several aborted attempts, the Northwest Hauling Company successfully raised a 150 foot smokestack at the new plant of Puget Sound Plywood located at 230 E. "F" Street. The huge steel stack weighed 13 tons and was constructed by Seattle Boiler Company. Once lifted into place on its 30 foot tall base, it jutted 180 feet into the air over the tideflats. The plant was expected to be fully operational in 30 days. The erection of the stack required several days of planning by the hauling company owned by Dan Cooney. Puget Sound Plywood, the first cooperative plywood plant in Tacoma, opened June 1, 1942. It had 298 members who each contributed $1,000 and received the same hourly pay and percentage of the company's profits. It was built on 3 1/2 acres at the mouth of the City Waterway. (T. Times 4/6/1942, pg. 2)
Henry Mill was located at the foot of No. Starr St., right at the waterfront. It was on the 28 acre site of the old Tacoma MIll Co. During the war, Henry Mill specialized in prefabricated elements for the military. The company was taken over in 1945 by Tacoma Lumber Fabricating Co. The photograph shows lots of stored lumber as well as a couple of cranes.
Henry Mill and Timber Company. Burner and lumber storage dock along the Tacoma waterfront. Henry Mill began operations at this site in 1925. It was formerly the site of the Old Tacoma Mill Co. TPL-8381
Henry Mill, construction of trusses. Henry Mill was located at 3001 No. Starr, the former site of the old Tacoma Mill Co. The mill was operated by John F. Buchanan, pres., and William F. Buchanan, VP. During the second World War, they became active in lumber prefabrication. Large buildings, such as hangars, were prebuilt in pieces and reassembled on arrival at their destination.
Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);
Ben Cheney and an unidentified woman sit at the back of a convertible on the dock next to the "Oregon." Richard Studio notes state that this picture was taken in Oregon. The cargo ship was built by Seattle-Tacoma Shipbuilding Corp. in Tacoma and was launched as the Cape Cleare.
Renton housing project showing the use of standardized Cheney studding. Construction is the Highlands Development, east of I-405. Photographs made for Cheney Lumber Co.
Plywood plant at Garibaldi, Oregon. This April 1, 1951, photograph shows sheets of veneer in the fine sanding process. Large pipes are for ventilation.
