Ordered by the Douglas Fir Plywood Association; plywood being used in the construction of a commercial "chicken house." Plywood is being attached to the exterior of the beams to form the curved roof of the chicken house. The laminated beam construction eliminated the need for posts for support. This is possibly the West Side Dairy Road poultry farm of the Guy Conine family in Fife. They operated one conventional chicken house and two of the quonset hut design. (TNT 10/28/1956, pg. B-6)
Ordered by the Douglas Fir Plywood Association; plywood being used in the construction of a commercial "chicken house." These curved beams will support the plywood roof. The metal "lids" lying on the ground are possibly part of the incubators, or brooders. This mammoth house will hold many chickens, a far cry from a Mom and Pop operation. This is possibly the operation belonging to the Guy Conine family of Fife. Located on West Side Dairy Road south of Fife, the family raised 31,000 chickens in 3 fryer houses. The 3 year old operation was one of the largest in Western Washington. The newest poultry house was 250 x 50 feet and built for $6,000. Its laminated beams eliminated the need for posts and natural sawdust covered the ground floor. It had 16 gas warmed brooders. (TNT 10/28/1956, pg. B-6)
Ordered by the Douglas Fir Plywood Association; plywood being used in the construction of a commercial "chicken house." The huge curved roof structure is followed by another just like it, indicating the size of this poultry company. This is possibly the Fife farm of the Guy Conine family. They had three chicken houses, one of the conventional type and two of the quonset hut variety. The first quonset was 180 x 50 feet. The most recently built one was 250 ft x 50 ft. Mrs. Conine went into the poultry business when her growing family required her to go to work. At her husband's suggestion, rather than working in an office or store, she decided to stay home and raise chickens. The 3 year old operation is now one of the largest in Western Washington. (TNT 10/28/1956, pg B-6)
The busy mail room of the Douglas Fir Plywood Association. A large mailer is being prepared. Some women fold the materials to be mailed and others stuff the envelopes. One of the jobs of the association was the promotion of the plywood product and the industry itself. One of the association's main sources of self promotion was the U.S. mail and the company maintained a large mail room to meet its demands.
Douglas Fir Plywood Association (Tacoma); Offices--Tacoma--1950-1960; Office workers--Tacoma--1950-1960; Correspondence;
Douglas Fir Plywood Association, 20th annual meeting. The Plywood and Veneer safety award is being presented to Williard Burrell of Weyerhauser by A.P. Stinchfield. Weyerhauser Timber's branch in Springfield Oregon was being presented the 1955 award for its low incidence of accidents. The trophy resembling a roller perched on a block of wood is the Carleton L. Smith Memorial Safety Award.
Douglas Fir Plywood Association (Tacoma); Weyerhaeuser Timber Co. (Springfield, Ore.); Burrell, Williard; Stinchfield, A.P.; Awards;
Retail lumber dealers meeting; photographs ordered by the Douglas Fir Plywood Association. The group of men, in coats and ties, are looking at a model of a new home. One man is removing the roof on the model. The men are surrounded by artists' renderings of new homes and press and customer information regarding "Signature Homes." The covering on the table and walls has the logo for the Fir Plywood Golden Jubilee 1905-1955.
Retail lumber dealers meeting; photographs ordered by the Douglas Fir Plywood Association. A group of men in coats and ties stand or sit in front of a newly constructed home listening to another man speak. These are possibly lumber dealers discussing new home markets for their wares.
Construction process for a life size lawn Santa Claus Christmas decoration, ordered by the Douglas Fir Plywood Association. The Santa pattern has been glued to the plywood and the design cut out so that it has a plywood back. Now the craftsman is applying lacquer so that the image will stand up to all weather conditions. Santa's head and arm are still unattached and will be glued on where the dotted lines indicate. (see also image #6 & 9 and C101278-1 for the finished product)
Douglas Fir Plywood Association (Tacoma)--Products; Woodworking--Tacoma; Christmas decorations; Handicraft--Tacoma;
The fifties were the height of the "do it yourself" age. In this photograph ordered by the Douglas Fir Plywood Association, a man demonstrates how to construct your own life size lawn Christmas decorations. Here he glues the Santa Claus cut out to a sheet of plywood. The purpose of the DFPA was to introduce the public to new uses for their product. As such, patterns and demonstrations were always available at the hardware stores for the home handyman. (see also image #9 & 10 and C101278-1 for the finished product)
Douglas Fir Plywood Association (Tacoma)--Products; Woodworking--Tacoma; Christmas decorations; Handicraft--Tacoma;
Construction process for a life size lawn Santa Claus Christmas decoration, ordered by the Douglas Fir Plywood Association. After gluing the pattern to the plywood, the handyman cuts the Santa out with a hand held saw. The dotted lines on the pattern indicated where another piece will be glued on top. (see also image #6 & 10 and C101278-1 for the finished product)
Douglas Fir Plywood Association (Tacoma)--Products; Woodworking--Tacoma; Christmas decorations; Handicraft--Tacoma;
The hands of a craftsman, possibly Panther Woodworking owner George Panther, carefully screw on a small piece of wood to a long rod in a May 3, 1957, photograph. The rod is being held steady between the fingers of one hand while the other hand is simultaneously using the screwdriver. Other screws and rubber rings are close by on the table. Photograph ordered by the Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Panther Woodworking (Tacoma); Woodworking--Tacoma--1950-1960; Screws;
Only a craftman's hands can be seen carefully using a Skilsaw on plywood boards at Weber Lumber Co. Bits of wood shavings are scattered close by. The portable table saw cuts the plywood into the desired length. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Saws; Douglas Fir Plywood Association (Tacoma);
View of new hangar at South Tacoma Airport on January 10, 1958, shows how plywood was heavily utilized. The narrow, slightly bent pieces of plywood above the plywood forms are box beams. They were probably put together at Weber Lumber Co. a few days before. These are believed to be some of the ten new "T" hangars built by C.E. Munson, contractor. Planes would be hangared five to a side. Photograph ordered by Douglas Fir Plywood Association. (TNT 2-2-58, A-14)
Plywood; Hangars--Tacoma; Douglas Fir Plywood Association (Tacoma);
Box beams are being erected in the new hangar at South Tacoma Airport on January 10, 1958. These plywood products were probably constructed at Weber Lumber Co. A small lifting machine has hoisted a box beam while three workers maneuver it into place. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Hoisting machinery; Douglas Fir Plywood Association (Tacoma);
A man, possibly Don Jaenicke, gives his shoes a high glossy shine as he has one foot on a plywood step containing an Esquire shoe shine kit. Cans of polish and a towel can be tucked away inside the plywood container and the container itself be stored in a closet. A convenient shoe rack is already in this Sylvan Park closet and space could be found for the shoe shine device as well. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Shoe shining--Tacoma; Shoes; Douglas Fir Plywood Association (Tacoma);
Plywood is being laid on this large roof in a May 16, 1958, photograph. One worker is observed with his back to the camera; he is standing on a portion of the roof which has a plywood sheet partially covering it. Long planks of wood are placed horizontally over the roofline. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Building construction; Douglas Fir Plywood Association (Tacoma);
Members of Douglas Fir Plywood Association chuckle over results of the golf tournament held as part of their 22nd annual meeting in June, 1958. It may be that one player has lost a wager; he is shown with a dollar bill in his hand. The D.F.P.A. met in Gearhart, Oregon, that year. Photograph ordered by Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Golf--Oregon--Gearhart;
Two members of Douglas Fir Plywood Association appear to be discussing the merits of a golf club in early June, 1958. The Association was holding its 22nd annual meeting, that year in Gearhart, Oregon, with a golf tournament as part of the activities. New officers of the association would be elected during the three-day conference. Photograph ordered by Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Golf--Oregon--Gearhart; Golfers--Oregon--Gearhart;
Two workmen monitor testing on a piece of plywood at the Douglas Fir Plywood Association's test lab at 1214 A St in Tacoma. The DFPA had two labs, one in Tacoma and one in Eugene, to test and improve the plywood product. The machinery doing the testing is 8 feet wide and 15 feet high and is being operated by two men. It appears to be measuring the pressure on the plywood.
Douglas Fir Plywood Association (Tacoma); Plywood; Testing--Tacoma--1950-1960; Product inspection--Tacoma--1950-1960;
Exterior shot of the Douglas Fir Plywood Association Circus. A banner outside displays the words "Plywood Jubilee" and "Free Show." Flood lighting can be seen at the top and bottom of the structure.
Display kiosk at the Doug Fir Plywood Association Circus with 233 small wooden disks labeled with ways the company creates sales. Black and white photographs of the plywood making process are visible in the background.
A miniature model of a plywood making work room on display at the Douglas Fir Plywood Association Circus. Dolls are exhibited processing the lumber into plywood.
Exterior shot of the Douglas Fir Plywood Association Circus. A banner outside displays the words "Plywood Jubilee" and "Free Show." A mural along the from of the structure depicts a magician turning a tree into plywood.
