Two members of Douglas Fir Plywood Association appear to be discussing the merits of a golf club in early June, 1958. The Association was holding its 22nd annual meeting, that year in Gearhart, Oregon, with a golf tournament as part of the activities. New officers of the association would be elected during the three-day conference. Photograph ordered by Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Golf--Oregon--Gearhart; Golfers--Oregon--Gearhart;
In March of 1952 an unidentified man was photographed tearing off an entry blank for the $20,000 "Room-for-Improvement" contest sponsored by the Douglas Fir Plywood Association. Contestants could win up to $4,000 by filling out an official entry form. Each contestant had to explain what remodeling project he wanted to complete and why plywood would be the best material to use. To win, the entry had to include both a written description of the project and before and after draws. The highest prize of $3,000, with a possible bonus of $1,000, was for the best plan to "Add-a-Room." Every contestant received an official entry form and a folder of home improvement ideas - all using plywood.
Douglas Fir Plywood Association (Tacoma); Contests--Tacoma;
Interior view of Coast Sash & Door Company showing men building church windows. Coast Sash & Door had been in business on the Tideflats since 1924. Photograph ordered by the Plywood Association. (filed with Argentum)
Plywood; Douglas Fir Plywood Association (Tacoma); Coast Sash & Door Co. (Tacoma); Windows;
Installation of sheathing at home of Joe Weston, Douglas Fir Plywood Association, Edith Link. A view in March of 1948 of the exterior of Joseph and Carol Weston's residence where a new addition is being added to the existing structure. Joe was a supervisor at DFPA. Douglas Fir Plywood Association was eager to show the potential uses of plywood.
Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Construction--Tacoma--1940-1950; Weston, Joseph--Homes & haunts; Dwellings--Tacoma--1940-1950;
Douglas Fir Plywood Association. Four men have gathered to look at a display board of process samples at the one-day conference of the Douglas Fir Plywood Association held June 10, 1946, at the Elks Temple auditorium. Some 150 leaders of the plywood industry were assembled at this conference. (T.Times, 6/11/1947, p.1)
Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;
Detail of plywood testing at St. Paul & Tacoma Lumber warehouse. Ordered by Douglas Fir Plywood Association, Dave Countryman.
Douglas Fir Plywood Association (Tacoma); Plywood; Product inspection--Tacoma; Testing--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1950-1960;
A young woman is seen using the film cabinets made from plywood at Central School. Shallow drawers hold small cans of film while larger motion picture cans are files on shelves behind her. Ordered by Douglas Fir Plywood Association.
Plywood; Douglas Fir Plywood Association (Tacoma); Central School (Tacoma); Audiovisual materials; Motion pictures;
Men are checking the conditions in the humidity chamber at the Douglas Fir plywood lab. A plywood board is filled with dials and levers for controling the conditions while performing tests on new products. Ordered by Douglas Fir Plywood Association.
Plywood; Douglas Fir Plywood Association (Tacoma); Testing--Tacoma; Product inspection--Tacoma; Lumber industry--Tacoma--1950-1960; Research facilities--Tacoma; Plywood Research Foundation (Tacoma);
Calf shelter made of plywood at Western Washington Experiment Station. The Station, affiliated with Washington State College, opened 7/1/1895. Its approximately 155 home acres were used to develop satisfactory farm practices in the fields of dairying, poultry production, and the growth of fruits, vegetables, specialty crops, ornamentals and bulbs. It employed approximately 70 people from the Tacoma/Puyallup area, 20 of those in research. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Douglas Fir Plywood Association (Tacoma); Barns--Tacoma; Western Washington Experiment Station (Puyallup);
Use of plywood in new Washington Hardware Wholesale Building, DFPA, Hal Dixon. The building, made of reinforced concrete, was designed by Lance, McGuire and Muri, Architects. Norman Strom was the contractor of the 210 foot by 211 foot, 50,000 square foot, building.
Douglas Fir Plywood Association (Tacoma); Reinforced concrete construction--Tacoma--1940-1950;
The trucks advertise the company's fur service. The trucks are painted in two tones, light colored bodies with darker fenders. Ordered by Douglas Fir Plywood Association, Hal Dixon.
Plywood; Douglas Fir Plywood Association (Tacoma); Trucks--Tacoma--1950-1960; Dodge trucks; Cleaning establishments--Tacoma;
The hands of a craftsman, possibly Panther Woodworking owner George Panther, carefully screw on a small piece of wood to a long rod in a May 3, 1957, photograph. The rod is being held steady between the fingers of one hand while the other hand is simultaneously using the screwdriver. Other screws and rubber rings are close by on the table. Photograph ordered by the Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Panther Woodworking (Tacoma); Woodworking--Tacoma--1950-1960; Screws;
Ordered by the Douglas Fir Plywood Association; plywood being used in the construction of a commercial "chicken house." These curved beams will support the plywood roof. The metal "lids" lying on the ground are possibly part of the incubators, or brooders. This mammoth house will hold many chickens, a far cry from a Mom and Pop operation. This is possibly the operation belonging to the Guy Conine family of Fife. Located on West Side Dairy Road south of Fife, the family raised 31,000 chickens in 3 fryer houses. The 3 year old operation was one of the largest in Western Washington. The newest poultry house was 250 x 50 feet and built for $6,000. Its laminated beams eliminated the need for posts and natural sawdust covered the ground floor. It had 16 gas warmed brooders. (TNT 10/28/1956, pg. B-6)
Ordered by the Douglas Fir Plywood Association; plywood being used in the construction of a commercial "chicken house." The huge curved roof structure is followed by another just like it, indicating the size of this poultry company. This is possibly the Fife farm of the Guy Conine family. They had three chicken houses, one of the conventional type and two of the quonset hut variety. The first quonset was 180 x 50 feet. The most recently built one was 250 ft x 50 ft. Mrs. Conine went into the poultry business when her growing family required her to go to work. At her husband's suggestion, rather than working in an office or store, she decided to stay home and raise chickens. The 3 year old operation is now one of the largest in Western Washington. (TNT 10/28/1956, pg B-6)
Douglas Fir Plywood Association, 20th annual meeting. The Plywood and Veneer safety award is being presented to Williard Burrell of Weyerhauser by A.P. Stinchfield. Weyerhauser Timber's branch in Springfield Oregon was being presented the 1955 award for its low incidence of accidents. The trophy resembling a roller perched on a block of wood is the Carleton L. Smith Memorial Safety Award.
Douglas Fir Plywood Association (Tacoma); Weyerhaeuser Timber Co. (Springfield, Ore.); Burrell, Williard; Stinchfield, A.P.; Awards;
Retail lumber dealers meeting; photographs ordered by the Douglas Fir Plywood Association. A group of men in coats and ties stand or sit in front of a newly constructed home listening to another man speak. These are possibly lumber dealers discussing new home markets for their wares.
Interiors of new DFPA office in Fuller building. Office workers at desk and counter, "Mr. Ritchie's" office in the background. The Douglas Fir Plywood Association began in 1938 when the original member mills banded together to promote and standardize their product. Under the able guidance of W.E. ("Diff") Difford, the handful of mills became an industry. By the forties, plywood boomed in housing and became the handiest building material ever devised. The Association later changed its name to the American Plywood Association, as more types of wood came to be used in the production of plywood. TPL-8396
Plywood; Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1950-1960; Offices--Tacoma--1950-1960; Office workers--Tacoma--1950-1960;
A man, possibly Don Jaenicke, gives his shoes a high glossy shine as he has one foot on a plywood step containing an Esquire shoe shine kit. Cans of polish and a towel can be tucked away inside the plywood container and the container itself be stored in a closet. A convenient shoe rack is already in this Sylvan Park closet and space could be found for the shoe shine device as well. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Shoe shining--Tacoma; Shoes; Douglas Fir Plywood Association (Tacoma);
A special Plyscord Calculator was prepared by the Douglas Fir Plywood Association to help contractors or homeowners determine correct plywood thickness, nail size, nailing schedule, rafter spacing and FHA minimum property requirements necessary when roofing. Plyscord Roof Sheathing was 100% genuine Douglas Fir plywood. Photograph ordered by Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Calculators;
Plywood displays for the Douglas Fir Plywood Association. A man does detailed and intricate cutting with a skill saw. A completed decorative woodwork piece can be seen in the background.
Plywood; Douglas Fir Plywood Association (Tacoma); Saws; Woodworking--Tacoma;
Plywood displays for the Douglas Fir Plywood Association. A man poses with decorative woodwork pieces cut from fir plywood. The wood has been cut in intricate patterns with a skill saw. Dowel rods have then been inserted to hold some of the pieces out from the main piece, giving the design a 3D look.
Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;
Plywood displays for the Douglas Fir Plywood Association. In this photograph, a piece of 3D woodworking has been backlighted. The result looks almost like neon.
Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;
Douglas Fir Plywood Association's (DFPA) annual meeting. The Golden Jubilee Convention was held in Portland, Oregon June 19-21, 1955, celebrating 50 years of the plywood industry from its inception in 1905 to 1955. One of the highlights was the unveiling of an exposition. This appears to be the wives of delegates posing at the entrance of the exhibit hall.
Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland; Plywood;
The Douglas Fir Plywood Association's Plywood Memorial at the Forestry Building in Portland, Oregon. On display is the first plywood panel ever made from Douglas Fir. It was produced by the Portland Manufacturing Company for display at the Lewis and Clark International Exposition in Portland in 1905. Its production marked the birth of an industry that fueled the economy and development of the Pacific Northwest. The unveiling of the memorial was one of the highlights of the DFPA's Golden Jubilee, June 19-21, 1955, held in Portland.
Plywood; Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland--1950-1960;
Advertising set up for plywood, the building material of 1,000 uses. Photograph ordered by the Condon Co. for an ad in Life magazine for the Douglas Fir Plywood Association. The year of 1955 marked the fiftieth anniversary of the invention of plywood panels. The DFPA used this opportunity to further promote their product. Plywood is shown being used left to right as woodworking materials, in flooring, as furniture, in boats, as house siding, playground building materials, a doghouse for a real pig and in traffic signs. This surrealistic overview would be sure to catch the readers eye in the magazine.
Plywood; Douglas Fir Plywood Association (Tacoma)--Products;
