A man, wearing a Douglas Fir Plywood Association lab coat, is adjusting the tension during plywood testing at St. Paul & Tacoma Lumber warehouse. Ordered by Douglas Fir Plywood Association, Tom Sias.

Douglas Fir Plywood Association (Tacoma); Plywood; Product inspection--Tacoma; Testing--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1950-1960;

Detail showing break points of stress tests on plywood at St. Paul & Tacoma Lumber. Ordered by Dave Countryman, civil engineer with Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Plywood; Product inspection--Tacoma; Testing--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1950-1960;

Frozen food lockers were manufactured by St. Paul and Tacoma Lumber Company at Coast Sash and Door Company using plaster-faced plywood. A workman inspects the fit of the door in its sash. Coast Sash and Door opened at this location on the Tacoma tideflats in 1924. Ordered by Douglas Fir Plywood Association, John Ritchie.

Plywood; Douglas Fir Plywood Association (Tacoma); Coast Sash & Door Co. (Tacoma); St. Paul & Tacoma Lumber Co. (Tacoma); Doors & doorways--Tacoma; Lumber industry--Tacoma--1950-1960;

Progress photograph at the Narrows Bridge construction site showing prefab of plywood forms. The Tacoma Narrows Bridge was the third longest suspension span in the world at the time it was built. Both towers of the bridge are seen in the background. Until the full weight of the deck was in place the tops of the two towers leaned about 3 feet toward the shore. Ordered by Douglas Fir Plywood Association. (TNT, 5/28/1950, p.1)

Plywood; Douglas Fir Plywood Association (Tacoma); Plywood; Bridges--Tacoma; Progress photographs; Tacoma Narrows Bridge (Tacoma);

Two men are constructing a silo by nailing sheets of plywood to an exterior form built with a circular shape cut from plywood and 2 x 4 lumber. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Silos--Tacoma;

Plywood veneer production for Bellingham Plywood Company. Exterior type fir plywood panels for boats and other outdoor uses are fed into a giant hot press. Heat and pressure "cure" the phenolic resin adhesive, producing an irreversible bond between the plys stronger than the wood itself. By 1950, there were 67 plywood mills in operation producing 2,553,652,000 feet of plywood. ("The Plywood Age" by Robert M. Cour)

Plywood; Lumber industry--Bellingham--1950-1960;

The inside of a wooden demonstration case contains wooden moldings strapped in place and ready for display. Case was photographed on January 9, 1951. Ordered by St. Paul and Tacoma Lumber, Corydon Wagner, Jr.

Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Showcases;

Tacoma was the nation's leader in the plywood industry. Douglas Fir Plywood Association and the Plywood Research Foundation were working on developing new and additional products that could be manufactured from parts of the tree not already being utilized. View of two unidentified DFPA representatives at the annual DFPA conference, being held at the Winthrop Hotel; conference welcome sign in background.

Lumber industry--Tacoma--1940-1950; Business people--Tacoma--1940-1950; Meetings--Tacoma--1940-1950; Signs (Notices); Plywood; Hotel Winthrop (Tacoma); Douglas Fir Plywood Association (Tacoma);

DFPA. A workman is laying a plywood sub-floor at what is believed to be the Devlin home. The walls have been covered with plywood as well. An edge of a brick fireplace is seen on the right. Large floor-to-ceiling windows are seen on the left. The beams are left open on the ceiling. The home was being restored after purchase earlier in 1949.

Douglas Fir Plywood Association (Tacoma); Plywood; Devlin, Charles E.--Homes & haunts; Floors--Lakewood--1940-1950;

Truck loaded and dumping lumber, St. Paul & Tacoma Lumber, Helgeson. Three large logs are loaded on the trailer of a Rucker Brothers truck. The enormous logs are on their way to the St. Paul & Tacoma Lumber Company. Robert G. Helgeson was a forester with St. Paul & Tacoma Lumber Company. TPL-8290

St. Paul & Tacoma Lumber Co. (Tacoma); Rucker Brothers (Tacoma); Logs; Lumber industry--Tacoma--1940-1950;

A new Coe lathe was installed at the Puget Sound Plywood Company plant on Tacoma's tideflats in 1950. Four unidentified employees at the plant monitored the giant lathe which was used to peel a continuous sheet of thin veneer off a prepared log. The veneer sheets were then glued together to make plywood. When the Puget Sound Plywood plant at 230 East F Street was built in 1942, Tacoma was a major plywood manufacturing center with over half a dozen plywood factories. Puget Sound Plywood was the first cooperative plywood plant in Tacoma.

Puget Sound Plywood, Inc. (Tacoma); Lathes; Plywood; Lumber industry--Tacoma--1950-1960; Cooperatives--Tacoma;

Cold room constuction, Douglas Fir Plywood Association laboratory, Dave Countryman. Worker installing plywood panels on walls of foil insulated room on October 31, 1950.

Plywood; Douglas Fir Plywood Association (Tacoma);

Plywood plant at Garibaldi, Oregon. This April 1, 1951, photograph shows sheets of veneer in the fine sanding process. Large pipes are for ventilation.

Plywood; Lumber industry--Oregon--1950-1960; Oregon-Washington Plywood Co. (Garibaldi, Or.);

New DFPA offices in the Fuller Building as pictured on September 18, 1953. This appears to be the mailroom. The Douglas Fir Plywood Association's headquarters in Tacoma was the center of the industry's national promotion of fir plywood. The cost of this promotion was over 2.5 million a year, much of it spent in postage. The DFPA was the highest volume customer of the Tacoma Post Office. TPL-8393

Plywood; Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1950-1960; Offices--Tacoma--1950-1960; Office workers--Tacoma--1950-1960;

Douglas Fir Plywood Association created laboratories to maintain high quality standards of its plywood; plywood was constantly being tested for durability and to detect any flaws. View of sheets of plywood in the D.F.P.A. warehouse undergoing testing. Photograph ordered by Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Plywood; Product inspection--Tacoma; Testing--Tacoma;

United States Plywood Corp.'s logging operation at Kosmos, Wa., eight miles southeast of Morton in south central Lewis County. A tall timber is circled by ropes and pulleys. A piece of large hoisting machinery can be seen. The ropes possibly helped bring down the trees down safely when the timber was cut.

Plywood; Lumber industry--Kosmos--1950-1960; United States Plywood Corp. (Seattle);

Exterior Cheney Lumber. Neatly stacked piles of logs are separated from sections of plywood by railroad tracks at the Cheney Lumber Co. lumberyard at the Port of Tacoma. The Cheney Lumber Co. was owned and operated by Ben Cheney. Founded in 1936, the company was established originally to manufacture railroad ties. Cheney developed the 8' Cheney Studs which were heavily in demand in the building industry. His logo of a horse was stamped on each stud produced. Photograph ordered by Cheney Lumber Co.

Lumber industry--Tacoma--1950-1960; Logs; Plywood; Cheney Lumber Co. (Tacoma);

Interior views of Anacortes hardboard plant. An Anacortes Veneer, Inc., worker appears almost dwarfed by the enormous machinery before him as he inspects gauges in the plywood plant on December 29, 1955. Anacortes Veneer was only the second worker-owned venture in the industry, following the example of Olympia Veneer. More workers would become owners in the near future. Photograph ordered by Douglas Fir Plywood Association.

Machinery; Lumber industry--Anacortes; Anacortes Veneer, Inc. (Anacortes); Douglas Fir Plywood Association (Tacoma);

Interiors hardboard plant in Anacortes. Sheets of veneer are stacked upright at the Anacortes Veneer plant on December 29, 1955. The plywood on carts would then be easily transported via tracks. Anacortes Veneer was the second worker-owned in the lumber industry, after Olympia Veneer in 1927, and after much trial and tribulation, peeled its first log on November 27, 1939. Photograph ordered by Douglas Fir Plywood Association. (Cour: The Plywood Age, p. 123-127)

Plywood; Lumber industry--Anacortes; Anacortes Veneer, Inc. (Anacortes); Douglas Fir Plywood Association (Tacoma);

Interior views of U.S. Plywood plant. Full sheets of plywood are being roughly sanded at the Seattle plant of U.S. Plywood in early January, 1956. One man carefully turns the wheels controlling the machine as the second man, standing at one end, removes the smoother sheet. See also D95927-3 for additional view. Photograph ordered by U.S. Plywood Corporation.

Plywood; Lumber industry--Seattle--1950-1960; United States Plywood Corp. (Seattle);

Aerial view of the Cheney Lumber Co. at the Port of Tacoma. Lumber is stacked for shipment in the railroad cars at the back of the picture. Log booms float in the water. Ben Cheney started in the lumber business with the production of railroad ties. Soon Cheney was concerned with the waste of the side cut slabs, often 2/3 of the log. His solution was to provide the housing industry with standard 8 ft studding, the same length as railroad ties. Production took off and the new product soon established the standard room height in residential construction in the U.S. by using formerly wasted timber. The 8 ft pieces, formerly known as "shorts" in the lumber trade, were now "Cheney Studs" emblazoned with the logo of a silhouette of a Belgian stud horse Cheney had seen at the Puyallup Fair. ("The Sou'wester" Fall, 2000; Volume xxxv, Number 3) TPL-6329

Lumber industry--Tacoma--1950-1960; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1950-1960; Industrial facilities--Tacoma; Cheney Lumber Co. (Tacoma); Shipping--Tacoma--1950-1960;

In April of 1956, workers at the Cheney Lumber Co. prepared packages of two by four "Cheney Studs" for shipment in the railroad cars behind. In the late 1930's, as timber became more difficult to obtain cheaply, Ben Cheney became concerned over the side-cut slab wastage, often 2/3 of the log, in the production of railroad ties. He came up with the idea of supplying the housing market with standard 8 foot studding, the same length as railroad ties were cut. At that time, ceilings were often 8 1/2 - 12 feet. A skilled marketer, Cheney renamed the "shorts," as these 8 foot pieces had been called, "Cheney Studs." The horse logo was based on a Belgian stud horse he had seen at the Puyallup Fair and the 2x4 ends were painted with bright red wax for instant identification. Cheney is credited with standardizing the room height in US residential construction. ("The Sou'wester" Volume xxxv, Number 3, Fall 2000)

Lumber industry--Tacoma--1950-1960; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1950-1960; Cheney Lumber Co. (Tacoma); Shipping--Tacoma--1950-1960;

Cheney Lumber Company's booth at the 1956 Home Show. Each year the Greater Tacoma Home Show filled the College of Puget Sound fieldhouse with company sponsored booths, highlighting topics of interest to home owners. Hung behind this booth is a photo collage of the lumber industry. Below the collage is a model of one of Cheney's lumberyards. (See D99015 image 1 for a closer view of the model.) To the left of the booth is a display of Cheney sponsored sports teams for kids, utilizing photographs and trophies. A young Cheney midget league footballer watches the demonstration. Each year, Ben Cheney sponsored amateur athletic teams; keeping money from being an obstacle between kids and sports. Cheney teams played football, baseball and basketball.

Lumber industry--Tacoma--1950-1960; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1950-1960; Cheney Lumber Co. (Tacoma); Greater Tacoma Home Show (Tacoma);

View of new hangar at South Tacoma Airport on January 10, 1958, shows how plywood was heavily utilized. The narrow, slightly bent pieces of plywood above the plywood forms are box beams. They were probably put together at Weber Lumber Co. a few days before. These are believed to be some of the ten new "T" hangars built by C.E. Munson, contractor. Planes would be hangared five to a side. Photograph ordered by Douglas Fir Plywood Association. (TNT 2-2-58, A-14)

Plywood; Hangars--Tacoma; Douglas Fir Plywood Association (Tacoma);

Box beams are being erected in the new hangar at South Tacoma Airport on January 10, 1958. These plywood products were probably constructed at Weber Lumber Co. A small lifting machine has hoisted a box beam while three workers maneuver it into place. Photograph ordered by Douglas Fir Plywood Association.

Plywood; Hoisting machinery; Douglas Fir Plywood Association (Tacoma);

Informal office photos of John Philip (Phil) Weyerhaeuser Jr., President of Weyerhaeuser Timber Company, with the oil painting of Frederick Weyerhaeuser, founder of the company. Executive offices of the company were located on the 10th floor of the Tacoma Building, 1017-1021 A St. The company was founded in 1900 with the purchase of 900,000 acres of Washington timberlands from the Northern Pacific Railroad Company. Weyerhaeuser now owns in excess of 1.6 million acres of timberland in Washington, with 4 million acres located elsewhere in the U.S. In 1971, the company moved its corporate headquarters to Federal Way. Phil Weyerhaeuser guided the company from 1933 until his death in 1956 and oversaw its transition from a dealer in timberlands to a manufacturer of forest products and a manager of renewable tree farms. Central to this change was his vision that the only way for a forest products company to operate was to own its own renewable timberlands. ("Phil Weyerhaeuser Lumberman" by Charles E. Twining)

Weyerhaeuser, John Philip; Weyerhaeuser Timber Co. (Tacoma); Lumber industry--Tacoma--1950-1960;

St. Paul & Tacoma Lumber Company. Photos featuring "quality control" of hemlock at St. Paul. A man in a hard hat operates controls for the lumber processing machinery at St. Paul & Tacoma. He watches the gauge to the right as he moves the controls.

Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma);

Plywood displays for the Douglas Fir Plywood Association. The word "Moke' " has been carved into a piece of fir plywood. The final swoop of the "M" has been lifted up to give a 3D effect. Moke panels were popular in the 1950s as backdrops in department store window displays and as decorative art in homes. For the same carving illuminated from the back, see image #7. (Additional information provided by a reader)

Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;

Plywood displays for the Douglas Fir Plywood Association. A design has been cut into fir plywood with a saw. Dowel rods hold some portions of the design raised from the main board; other portions are bent back from the main design. The end result is a 3D look. A wooden finished knob in the center also lends a dimensional feel.

Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;

Plywood displays for the Douglas Fir Plywood Association. A design has been cut into fir plywood with a saw. The design is raised in some places and bent the other direction in others. The design has been illuminated from behind, accenting the detail. For the same design without the backlighting, see image #51.

Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;