Interior of Oregon Washington plywood plant at Garibaldi, Oregon. Stacks of odds and ends of wood dot the floor of this mostly empty warehouse. The warehouse seems to echo emptily with its exposed beams and hanging fluorescent lighting. Some strips of veneer are less than four feet wide. These are also dried and then edge-glued together into a continuous sheet and cut to panel size. ("The Challenge of Wood" BCFP's 1979 Annual Report)
A man, wearing a Douglas Fir Plywood Association lab coat, is adjusting the tension during plywood testing at St. Paul & Tacoma Lumber warehouse. Ordered by Douglas Fir Plywood Association, Tom Sias.
Douglas Fir Plywood Association (Tacoma); Plywood; Product inspection--Tacoma; Testing--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1950-1960;
Detail showing break points of stress tests on plywood at St. Paul & Tacoma Lumber. Ordered by Dave Countryman, civil engineer with Douglas Fir Plywood Association.
Douglas Fir Plywood Association (Tacoma); Plywood; Product inspection--Tacoma; Testing--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1950-1960;
The exterior of the St. Paul Restaurant was located in one corner of the St. Paul Lumber Company building. A public pay telephone stands at the corner under a sign for the restaurant that slants away from the building. This photograph was taken on a cold day when snow still lay on the ground and covered the limbs of the trees and the top of the telephone booth. The restaurant was owned by S.R. and Mrs. E.J. Hull.
Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); St. Paul Restaurant (Tacoma); Restaurants--Tacoma; Telephone booths--Tacoma--1950-1960; Snow--Tacoma--1950-1960;
A worker at the St. Paul & Tacoma Lumber Co. retail yard walks on top of a large piece of timber, preparing to hook up the hoisting machinery to it, and move it from the truck to a stack of lumber. St Paul's three mile long lumber yard was believed to be the largest in the world by the 1940's. St. Paul was a pioneer in the plywood industry, and also in reforestation.
Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;
Several Rucker Bros. trucks loaded with lumber at the St. Paul & Tacoma retail yard. The retail yard was the largest in the Northwest. Rucker Brothers Trucking was located at the retail yard, facilitating the delivery of the wood throughout the Northwest.
Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Rucker Brothers (Tacoma); Trucks--Tacoma--1950-1960;
A man believed to be Arthur E. Gruhl, technician at the Fir Door Institute, tests a full sized door at the Plywood Research Foundation laboratory in September, 1951. Douglas Fir plywood was constantly being tested for durability and to maintain high standards of quality production. The Douglas Fir Plywood Association, based in Tacoma, set up the Plywood Research Foundation as an industry maintained quality control laboratory.
Plywood Research Foundation (Tacoma); Plywood; Doors & doorways--Tacoma; Lumber industry--Tacoma--1950-1960; Laboratories--Tacoma--1950-1960; Product inspection--Tacoma; Testing--Tacoma--1950-1960;
A St. Paul & Tacoma Lumber Company employee checks his inventory sheet of wooden gutters which are being prepared for shipment in August, 1951. The gutters will be hoisted on board a vessel at the St. Paul & Tacoma dock. St. Paul not only shipped finished gutters but squared off lumber and plywood as well.
St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1950-1960; Gutters (Roofs)--Tacoma;
Frozen food lockers were manufactured by St. Paul and Tacoma Lumber Company at Coast Sash and Door Company using plaster-faced plywood. A workman inspects the fit of the door in its sash. Coast Sash and Door opened at this location on the Tacoma tideflats in 1924. Ordered by Douglas Fir Plywood Association, John Ritchie.
Plywood; Douglas Fir Plywood Association (Tacoma); Coast Sash & Door Co. (Tacoma); St. Paul & Tacoma Lumber Co. (Tacoma); Doors & doorways--Tacoma; Lumber industry--Tacoma--1950-1960;
Progress photograph at the Narrows Bridge construction site showing prefab of plywood forms. The Tacoma Narrows Bridge was the third longest suspension span in the world at the time it was built. Both towers of the bridge are seen in the background. Until the full weight of the deck was in place the tops of the two towers leaned about 3 feet toward the shore. Ordered by Douglas Fir Plywood Association. (TNT, 5/28/1950, p.1)
Plywood; Douglas Fir Plywood Association (Tacoma); Plywood; Bridges--Tacoma; Progress photographs; Tacoma Narrows Bridge (Tacoma);
Two men are constructing a silo by nailing sheets of plywood to an exterior form built with a circular shape cut from plywood and 2 x 4 lumber. Ordered by Douglas Fir Plywood Association.
Plywood; Douglas Fir Plywood Association (Tacoma); Silos--Tacoma;
The inside of a wooden demonstration case contains wooden moldings strapped in place and ready for display. Case was photographed on January 9, 1951. Ordered by St. Paul and Tacoma Lumber, Corydon Wagner, Jr.
Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma); Showcases;
A new Coe lathe was installed at the Puget Sound Plywood Company plant on Tacoma's tideflats in 1950. Four unidentified employees at the plant monitored the giant lathe which was used to peel a continuous sheet of thin veneer off a prepared log. The veneer sheets were then glued together to make plywood. When the Puget Sound Plywood plant at 230 East F Street was built in 1942, Tacoma was a major plywood manufacturing center with over half a dozen plywood factories. Puget Sound Plywood was the first cooperative plywood plant in Tacoma.
Puget Sound Plywood, Inc. (Tacoma); Lathes; Plywood; Lumber industry--Tacoma--1950-1960; Cooperatives--Tacoma;
Plywood veneer production for Bellingham Plywood Company. Exterior type fir plywood panels for boats and other outdoor uses are fed into a giant hot press. Heat and pressure "cure" the phenolic resin adhesive, producing an irreversible bond between the plys stronger than the wood itself. By 1950, there were 67 plywood mills in operation producing 2,553,652,000 feet of plywood. ("The Plywood Age" by Robert M. Cour)
Cold room constuction, Douglas Fir Plywood Association laboratory, Dave Countryman. Worker installing plywood panels on walls of foil insulated room on October 31, 1950.
Plywood; Douglas Fir Plywood Association (Tacoma);
View of new hangar at South Tacoma Airport on January 10, 1958, shows how plywood was heavily utilized. The narrow, slightly bent pieces of plywood above the plywood forms are box beams. They were probably put together at Weber Lumber Co. a few days before. These are believed to be some of the ten new "T" hangars built by C.E. Munson, contractor. Planes would be hangared five to a side. Photograph ordered by Douglas Fir Plywood Association. (TNT 2-2-58, A-14)
Plywood; Hangars--Tacoma; Douglas Fir Plywood Association (Tacoma);
Box beams are being erected in the new hangar at South Tacoma Airport on January 10, 1958. These plywood products were probably constructed at Weber Lumber Co. A small lifting machine has hoisted a box beam while three workers maneuver it into place. Photograph ordered by Douglas Fir Plywood Association.
Plywood; Hoisting machinery; Douglas Fir Plywood Association (Tacoma);
Exterior Cheney Lumber. Neatly stacked piles of logs are separated from sections of plywood by railroad tracks at the Cheney Lumber Co. lumberyard at the Port of Tacoma. The Cheney Lumber Co. was owned and operated by Ben Cheney. Founded in 1936, the company was established originally to manufacture railroad ties. Cheney developed the 8' Cheney Studs which were heavily in demand in the building industry. His logo of a horse was stamped on each stud produced. Photograph ordered by Cheney Lumber Co.
Interior views of Anacortes hardboard plant. An Anacortes Veneer, Inc., worker appears almost dwarfed by the enormous machinery before him as he inspects gauges in the plywood plant on December 29, 1955. Anacortes Veneer was only the second worker-owned venture in the industry, following the example of Olympia Veneer. More workers would become owners in the near future. Photograph ordered by Douglas Fir Plywood Association.
Machinery; Lumber industry--Anacortes; Anacortes Veneer, Inc. (Anacortes); Douglas Fir Plywood Association (Tacoma);
Interiors hardboard plant in Anacortes. Sheets of veneer are stacked upright at the Anacortes Veneer plant on December 29, 1955. The plywood on carts would then be easily transported via tracks. Anacortes Veneer was the second worker-owned in the lumber industry, after Olympia Veneer in 1927, and after much trial and tribulation, peeled its first log on November 27, 1939. Photograph ordered by Douglas Fir Plywood Association. (Cour: The Plywood Age, p. 123-127)
Plywood; Lumber industry--Anacortes; Anacortes Veneer, Inc. (Anacortes); Douglas Fir Plywood Association (Tacoma);
Interior views of U.S. Plywood plant. Full sheets of plywood are being roughly sanded at the Seattle plant of U.S. Plywood in early January, 1956. One man carefully turns the wheels controlling the machine as the second man, standing at one end, removes the smoother sheet. See also D95927-3 for additional view. Photograph ordered by U.S. Plywood Corporation.
Plywood; Lumber industry--Seattle--1950-1960; United States Plywood Corp. (Seattle);
Aerial view of the Cheney Lumber Co. at the Port of Tacoma. Lumber is stacked for shipment in the railroad cars at the back of the picture. Log booms float in the water. Ben Cheney started in the lumber business with the production of railroad ties. Soon Cheney was concerned with the waste of the side cut slabs, often 2/3 of the log. His solution was to provide the housing industry with standard 8 ft studding, the same length as railroad ties. Production took off and the new product soon established the standard room height in residential construction in the U.S. by using formerly wasted timber. The 8 ft pieces, formerly known as "shorts" in the lumber trade, were now "Cheney Studs" emblazoned with the logo of a silhouette of a Belgian stud horse Cheney had seen at the Puyallup Fair. ("The Sou'wester" Fall, 2000; Volume xxxv, Number 3) TPL-6329
In April of 1956, workers at the Cheney Lumber Co. prepared packages of two by four "Cheney Studs" for shipment in the railroad cars behind. In the late 1930's, as timber became more difficult to obtain cheaply, Ben Cheney became concerned over the side-cut slab wastage, often 2/3 of the log, in the production of railroad ties. He came up with the idea of supplying the housing market with standard 8 foot studding, the same length as railroad ties were cut. At that time, ceilings were often 8 1/2 - 12 feet. A skilled marketer, Cheney renamed the "shorts," as these 8 foot pieces had been called, "Cheney Studs." The horse logo was based on a Belgian stud horse he had seen at the Puyallup Fair and the 2x4 ends were painted with bright red wax for instant identification. Cheney is credited with standardizing the room height in US residential construction. ("The Sou'wester" Volume xxxv, Number 3, Fall 2000)
Cheney Lumber Company's booth at the 1956 Home Show. Each year the Greater Tacoma Home Show filled the College of Puget Sound fieldhouse with company sponsored booths, highlighting topics of interest to home owners. Hung behind this booth is a photo collage of the lumber industry. Below the collage is a model of one of Cheney's lumberyards. (See D99015 image 1 for a closer view of the model.) To the left of the booth is a display of Cheney sponsored sports teams for kids, utilizing photographs and trophies. A young Cheney midget league footballer watches the demonstration. Each year, Ben Cheney sponsored amateur athletic teams; keeping money from being an obstacle between kids and sports. Cheney teams played football, baseball and basketball.
Lumber industry--Tacoma--1950-1960; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1950-1960; Cheney Lumber Co. (Tacoma); Greater Tacoma Home Show (Tacoma);
ca. 1956. Port McNeil, logging. This is possibly a company home provided for management. It is larger and more ornate than those provided for the workers. The window boxes bloom with flowers and the yard is surrounded by a white board fence. The poles sticking up from the beach area are possible oyster beds.
ca. 1956. Alaska Pine, Rayflo plant at Marpole. Experimentation was an important part of research at Rayonier and its Canadian subsidiary Alaska Pine. Cellulose and timber production produced a large amount of wasted byproducts which the company felt could be developed into the products of the future. Rayflo was one of these products; developed only a few years prior, it was in high demand in the oil industry and being studied for use in the manufacture of ceramics. (Rayonier's annual report for 1956)
Lumber industry--British Columbia--1950-1960; Trees; Logs; Chemical industry--British Columbia--1950-1960; Alaska Pine & Cellulose Limited (Vancouver B.C.);
ca. 1956. Alaska Pine; Rayflo plant at Marpole. Alaska Pine, a Canadian subsidiary of Rayonier Inc., had a research center in its Vancouver B.C. offices. It was used to quality control test the cellulose and the products manufactured from it. They also experimented with the residue from the process, searching for new products. The new lab facilities in Vancouver were completed in 1954. More money was being invested in research, in hopes of creating new products and more company growth.
Lumber industry--British Columbia--1950-1960; Trees; Logs; Chemical industry--British Columbia--1950-1960; Alaska Pine & Cellulose Limited (Vancouver B.C.);
ca. 1956. Alaska Pine, sawmill plant at New Westminster, B.C. Alaska Pine had large modern sawmills at the Marpole (Vancouver) and New Westminster Sawmill Divisions. The combined daily capacity of both mills was a million board feet of lumber. This is the paved yard for intermediate lumber storage at Westminster. Some 10,000,000 board feet of material were held here. 49 % of Alaska Pine production consists of Western hemlock, 31% red cedar, 14% Douglas fir and the remainder Sitka spruce, white pine and yellow cypress. The mills produced a variety of products for wholesale markets sold in the U.S. and Canada. (Rayonier's annual report for 1956)
