Henry Mill in Old Town. A new and very modern mill opened in Old Town on July 20, 1925, located on the waterfront at 3001 North Starr St. Henry Mill & Timber Co. would remain in business there until 1945 when it was taken over by the Tacoma Lumber Fabricating Co. During WWII, Henry Mill became active in prefabricated structures for the military. They specialized in bridges and hangars. TPL-2048; G36.1-143B

Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1920-1930; Lumber industry--Tacoma--1920-1930; Railroad tracks--Tacoma--1920-1930;

Three men operating machinery at an Olympia sawmill in June of 1924. Photograph taken on behalf of Pacific Mutual Door Co. G75.1-025

Sawmills--Olympia; Machinery; Lumber industry--Olympia--1920-1930;

Small sheets of plywood are being loaded from an Olympia sawmill directly onto a Northern Pacific car by three men on June 12, 1924. These will be used by the Pacific Mutual Door Co. G75.1-023

Lumber industry--Olympia--1920-1930; Plywood; Sawmills--Olympia; Railroad freight cars--Olympia;

Union Pacific engine #3222 as viewed on June 13, 1924. The powerful locomotive was on the tracks at the Union Depot. TPL-66; G45.1-004

Railroad locomotives--Tacoma; Union Pacific Railroad Co. (Tacoma);

This is the SS Bienville, nearly ready for launching, in early July of 1924. The combination freighter/passenger vessel was built by Todd Dry Dock & Construction for the Atlantic Steamship line of the Southern Pacific. She would be launched on July 16, 1924. The Bienville is a single screw steamer with a sea speed of 16 knots. After much fanfare, she was delivered to her owners in November but would suffer massive damage due to fire while undergoing repairs in New Orleans in March of 1925. G37.1-112 (TNT 7-9-24, p. 4; TNT 3-19-25, p. 1-article on fire; TDL 3-28-25, p. 1-article on fire)

Boat & ship industry--Tacoma--1920-1930; Boats--Tacoma--1920-1930;

Linco Log & Lumber Co.; Yard engine. The versatility of the steam powered railroad was responsible for early advances in logging. By replacing animals as beasts of burden, they made it possible to harvest timber in the most inaccessible areas. During the 1920's, large scale locomotive operations flourished in the northwest. The system consisted of a main line with spurs, trackage that could be shifted constantly to follow the timber. With the aid of geared engines, such as the Shay locomotive, built from 1884-1945 by the Lima Locomotive Co., they could go into most mountainous areas despite the grade. The logs could then be "yarded," brought from the field into areas for shipment. (Labbe & Goe, Railroads in the Woods) G75.1-074; TPL-818

Linco Log & Lumber Co. (Lindberg); Lumber industry--1920-1930; Lumber camps--1920-1930; Railroad locomotives--1920-1930;

Side view of parked St. Paul & Tacoma Lumber Co. No. 1 truck filled with stacks of what may be plywood. This April, 1920, photograph may have been taken at the company's downtown Tacoma yard. As noted through the doorless truck, there was no driver at the wheel. G36.1-160

St. Paul & Tacoma Lumber Co. (Tacoma); Trucks--1920-1930;

St. Paul & Tacoma lumber yard. This November, 1920, progress photograph shows a fuel conveyor belt being constructed 24 feet above the ground at the St. Paul & Tacoma Lumber Co. Two 2 ton locomotive cranes are pictured lifting a 106 foot truss into place. The 641 foot long aerial belt will run from the mill to a point on the waterway directly across from the Consumers Central Heating Co. The conveyor belt will be used to transport the mill's waste wood, formed into logs. The fuel will be dumped on barges and carried across to the heating plant where it will be burned to supply heat to the city. The conveyor belt was all wood with the exception of the belt itself and the roller bearings. Parallel chord lattice was used for the entire length with the exception of street crossings where 106 foot span Belfast type lattice trusses were used. (TDL 1/9/1921, pg. 6) TPL-2047; G36.1-163

Lumber industry--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Belts & belting (Equipment); Fuel trade--Tacoma--1920-1930;

This elevated view of the Buffelen Lumber & Manufacturing Company, looking toward Tacoma across the Tideflats, was captured in November of 1921. The narrow bridge built on pilings is the old Hylebos Creek bridge. Located in the industrial Tideflats at Lincoln Ave. & Taylor Way, the sprawling Buffelen plant had been undergoing rapid expansion with the construction of a new warehouse in 1916 and a new power plant five years later. Other important improvements in 1921 included dry kilns and warehouses. Buffelen was organized in 1912 by John Buffelen primarily as a door manufacturer. In 1916 the company started to manufacture fir plywood. A small ad placed in the Tacoma Daily Ledger on 7-11-21 listed "fir doors, 3-ply panels, alder panels, sash, etc." as products manufactured by the firm which had offices in Minneapolis and Tacoma. (TDL- Ad 7-11-21, p. 7; Tacoma Sunday Ledger, 1-1-22, B-5-article)

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Hylebos Bridge (Tacoma);

Elevated view of Tacoma's industrial tideflats as pictured on March 25, 1922. Visible are the sprawling St. Paul & Tacoma Lumber Co. and the Washington Parlor Furniture Co. at far left and the Pacific Lumber & Millwork Co. in center. They were at the foot or end of the 11th St. Bridge (now Murray Morgan Bridge). TPL-5731; G91.-017

St. Paul & Tacoma Lumber Co. (Tacoma); Washington Parlor Furniture Co. (Tacoma); Pacific Lumber & Millwork Co. (Tacoma);

These massive logs are being transported on Northern Pacific flatcars to the St. Paul & Tacoma Lumber Co. yard on May 13, 1922. Railroad tracks intersect at this particular location. G44.1-103

Lumber industry--Tacoma--1920-1930; Logs; St. Paul & Tacoma Lumber Co. (Tacoma); Northern Pacific Railway Co. (Tacoma); Railroad cars--Tacoma--1920-1930; Railroad tracks--Tacoma--1920-1930;

Sawmill operations. View of St. Paul & Tacoma's modern sawmill, recently placed in operation, as pictured on May 21, 1922. Machinery and tracks in foreground. The new mill was the latest of improvements enacted by the lumber firm. G36.1-034 (TDL 5-23-22, p. 7-article)

Lumber industry--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Sawmills--Tacoma--1920-1930; Machinery;

This is one of Tacoma's shipyards in the Tideflats in a photograph taken on September 8, 1922. A crane and stacks of lumber are visible across from the large building in this deteriorated print. G36.1-011

Hoisting machinery; Boat & ship industry--Tacoma--1920-1930;

Close-up of burnt timber at the Mineral Lake Logging Co.'s Camp 17. Photographer Boland ventured out to the remote logging camp located in north central Lewis County on September 3, 1926, to document the damage that fire had caused to timberlands. Burned sections of cut timber are piled haphazardly on the ground, obscuring many tree stumps.

Mineral Lake Logging Co. Camp 17; Fires; Tree stumps; Logs; Lumber industry--Washington--1920-1930;

This burned railroad bridge was located near Mineral Lake Logging Co.'s Camp 17 in 1926. The area had suffered fire damage which included part of this railroad bridge constructed out of logs. The bridge curved around a gulch.

Mineral Lake Logging Co. Camp 17; Logging industry--Washington--1920-1930; Fires; Logs; Railroad bridges--Washington--1920-1930;

Pacific States Lumber Co. plant, Selleck, Washington. This elevated view of the large, sprawling facility was taken on October 4, 1926. Selleck was a mill town in southeast King County formed by the owners of the Pacific States Lumber Co. about 1908 and named after Frank Selleck. It grew into a bustling community of 900 people housed in company buildings and included a hospital, hotel, school, gathering hall and mill buildings. Pacific States Lumber Co. built the world's highest railroad trestle, 204 feet over the Cedar River. The plant, running with modernized equipment, built a good reputation and landed a contract with Tokyo to supply lumber to rebuild the city after the massive earthquake there of 1923. Many Japanese workers and their families were sent to Selleck as laborers and formed a cohesive community of their own. Pacific States Lumber declared bankruptcy in 1939 and the company town's population shrank until its present number of about 90. It was named to the National Register of Historic Places in 1989. (Seattle Times, 7-31-07) G75.1-077

Pacific States Lumber Co. (Selleck); Lumber industry--1920-1930;

Truss section manufactured by the Ernest Dolge, Inc., lumber company, shown at unidentified construction site in March of 1928. Ernest Dolge, Inc., had a national reputation for producing special "structual" grades of wood. This truss section was strongly bolted together. The Dolge firm was located on the Belt Line at approximately 1800 Taylor Way in the Tideflats, occupying 16 acres on the Hylebos Waterway. Their sawmill produced timbers for boats, beams, and even fire extension ladders that used Douglas fir. The Dolge mill cut 80,000 feet of timber daily and employed 55 men with a yearly payroll of nearly $100,000. G36.1-125 (TDL 4-10-28, Section 3, Industrial section, p. 1, 8-articles)

Ernest Dolge, Inc. (Tacoma); Lumber industry--Tacoma--1920-1930; Trusses--Tacoma;

Interior of new St. Paul & Tacoma Lumber Co. mill as viewed on June 15, 1928. This is believed to be the new sawmill used to cut hemlock logs built in the Tideflats north of E. 11th St., part of a joint venture between the Union Bag & Paper Corporation (N.Y.) and St. Paul & Tacoma Lumber. The mill, opening on June 18, 1928, was built on the site of the old Foundation shipyards. It contained modern new machinery including a new Yates planer, 72 x 14-inch edger, 48 x 16-inch Diamond gangsaw, 9-foot Diamond band saw, 7-foot resaw and two mechanical saw trimmers. In addition, the mill had a new hammerhead crane which was capable of lifting 7 1/2 tons. G36.1-150 (TNT 6-15-28, p. 10-article)

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Sawmills--Tacoma--1920-1930;

Hooker locomotive. A Hooker Electrochemical Co. locomotive pulling four storage tanks paused on tracks on October 14, 1929. Hooker opened in February of 1929 and aided the Northwest pulp and paper industry by producing chemicals necessary for operations. It became one of the area's largest chemicals companies and underwent several name changes until closure in the early 2000's. TPL-6604; G44.1-058

Hooker Electrochemical Co. (Tacoma); Chemical industry--Tacoma--1920-1930; Railroad tank cars--Tacoma--1920-1930; Railroad locomotives--Tacoma--1920-1930;

Members of the Washington Co-op Egg & Poultry Association are aboard a small Great Northern locomotive which is pulling three boxcars presumably packed with eggs for the 1930 Western Washington Fair. G74.1-034

Railroad locomotives; Railroad freight cars; Washington Co-op Egg & Poultry Association (Tacoma);

St. Regis logging operations, location unknown, in May of 1936. A heavy duty truck with five coils of wire/chain/rope hanging on one side is mired off the dirt road. Many logs have already been downed and a "donkey" is billowing steam. G75.1-043

Lumber industry--1930-1940; St. Regis Paper Co.; Trucks--1930-1940; Logs; Donkey engines;

Timber on St. Regis land as photographed in August of 1936. Some trees have already been felled. G75.1-097

St. Regis Paper Co.; Trees; Lumber industry--1930-1940;

1936 daily operations at St. Regis. A series of photographs were taken in two days of a St. Regis facility by the Boland studios in December of 1936. It is believed that the plant was the Tacoma location at 801 Portland Ave. Many internal shots were taken including the above which appears to be a large steel covered vat. The St. Regis Kraft Co. plant had undergone a months-long remodeling which included new machinery and fixtures. All of this was to transform the outdated facility into a modern plant so that it could produce 60,000 tons of bleached pulp per year. (T.Times 10-14-36, p. 5-article; T. Times 11-25-36, p. 5-article) G37.1-031

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940;

1936 daily operations at St. Regis. Interior view of a St. Regis Paper Co. facility, believed to be the Tacoma plant located at 801 Portland Ave. in 1936. Steel beams and steel or concrete chutes in sight. St. Regis employed 845 men to remodel its Tacoma location in order to transform it into a modern plant for the production of 60,000 tons of bleached pulp per year. New machinery was purchased to handle 25,000 short logs per hour and electric saws and machines to bark logs were also included. Tacoma's prime location near rail, water and (later) highway access made it a valuable asset for manufacturers in the industrial Tideflats. (T.Times 10-14-36, p. 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940;

1936 Daily operations at St. Regis. A St. Regis employee is shown on December 21, 1936, loading stacks of the company's pulp via forklift. Another tall stack of pulp is already on a raised pallet. This may be the St. Regis Tacoma facility located at 801 Portland Ave. which had recently undergone a $1,000,000 modernization. TPL-6803; G37.1-055

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Hoisting machinery; Mills--Tacoma--1930-1940;

1936 daily operations at St. Regis. Three employees of St. Regis Paper Co. stand behind a large cut log whose bark may have already been stripped. Although the particular St. Regis plant was not identified, this may have been the Tacoma plant located at 801 Portland Ave. The plant had purchased new machinery including machines to bark logs before going to regular pulp chippers and was undergoing transformation into a modern plant. By late November of 1936, the newly modernized Tacoma plant had commenced operations with a crew of 250. Eventually the plant would operate on a 24-hour day with four staggered shifts of eight hours. The modernization allowed for production of 60,000 tons of bleached pulp per year. TPL-2453; G36.1-023 (T.Times 10-14-36, pl 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Logs; Mills--Tacoma--1930-1940;

1936 daily operations at St. Regis. Interior view of newly expanded and modernized St. Regis mill, presumed to be in Tacoma, as seen on December 21-22, 1936. The company was proceeding into the bleached pulp business and had to extensively update their facility at 801 Portland Ave. in the Tideflats. St. Regis had previously manufactured unbleached pulp but the demand for the bleached product was rising, necessitating modernization. It would take another 60 days or so for the bleaching unit to be ready so the company would continue to produce unbleached pulp. G37.1-063 (T. Times 10-14-36, p. 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940; Machinery;

A St. Regis employee maneuvers a lift to hoist stacks of pulp at the big pulp plant in late December of 1936. The St. Regis Kraft Co. had resumed operations with a crew of 250 after months of modernization and expansion. Unbleached pulp would be produced until the new bleaching unit was ready in 1937. G37.1-056 (T.Times 10-14-36, p. 5-article; T.Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940; Hoisting machinery;

Workers at St. Regis Kraft Co. are in the process of wrapping and weighing stacks of pulp for shipment in this February 5, 1937, photograph. St. Regis' Tacoma plant had undergone a $1,000,000 modernization project in order to manufacture bleached pulp. New machinery was brought in and the plant was reopened in late December of 1936 to provide jobs for hundreds of Tacoma residents. G37.1-069

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940; Machinery;

Medusa on the ways. The USS Medusa, a $4,000,000 repair ship for the Pacific fleet, is pictured prior to launching at the Bremerton Navy Yard in April of 1923. The "Medusa," the first ship of her kind to be built on the Pacific coast, had a displacement of 10,000 tons. Her launching was rather unusual, as she did not not slide down the ways into water as normal but instead, water was poured into the construction dock where she was built. When floated, she was towed to her new berth and the dock emptied. She was 483-feet, 9 inches long and resembled a huge ocean liner except for the small guns mounted on her. The USS Medusa was launched on April 16, 1923, with Mrs. Burns Poe of Tacoma acting as sponsor. G37.1-121 (TNT 4-4-23, p. 17; TDL 4-7-23, p. 1-article; TDL 4-17-23, p. 1-article)

Boat & ship industry--Bremerton--1920-1930; Launchings--Bremerton--1920-1930;