On August 21, 1926, H.T. Moore of the Moore Amusement Company, owner of the Rialto and Colonial Theaters, joined forces with the new Pacific Northwest Theaters Inc. Moore, left, is shown shaking hands with Harry C. Arthur of Los Angeles, president of the new organization, in front of H.C. Weaver Productions, Inc., movie studio at Titlow Beach. H.C. Weaver, head of the studio, stands with his hands in pocket, on far right in this sepia photograph. Left to right, the group includes J.F. Douglas, Moore, G. C. Kirley, Arthur, L.S. Hamm and Weaver. The group, which was organized to consolidate motion picture distribution in the Pacific Northwest, was touring the studio. The studio was built in 1924. Weaver Productions hoped to lure Hollywood to film extensively in the Northwest; however, the studio apparently only made three motion pictures in their four-year existence. It closed in 1928 and was later converted into a dance hall in 1932 before being destroyed by fire that same year. Boland B15513, BU-13759, TPL-8182 (TNT 8/23/1926, pg. 6)

Motion picture studios--Tacoma; Weaver, H.C.; Shaking hands--Tacoma; H.C. Weaver Productions, Inc. (Tacoma);

The Henry Mill & Timber Co. had just begun operating in late July of 1925, just about two weeks before this photograph of the plant's exterior was taken. The plant took over two years to build due to difficulty in preparing the foundation. Built on the 26-acre waterfront site of the old Tacoma Mill Co., the sawmill was designed to use the most modern equipment. It started with a head saw, edger and trimmer. Finished products could be easily transported via ship or nearby railroad tracks. G36.1-143A (TNT 7-20-25, p. 16-article)

Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1920-1930; Lumber industry--Tacoma--1920-1930; Railroad tracks--Tacoma--1920-1930;

On March 4, 1926, firefighters from seven companies fought desperately to save the building at 1953 So. C St. The structure, built in 1907, was home to the Henningsen Creamery Co. Flames swept through the three story brick and concrete building as firefighters worked with ladders and hoses from the outside. The fire broke out at 7:40 a.m. caused by the explosion of tar being heated on an oil stove by workmen. The workers were remodeling the lower floor of the building, installing an ice cream plant. Damages were estimated at $50,000 - 100,000. This restored building is now part of the University of Washington Tacoma campus. TPL-7959, BU- 12644, G26.1-078 (TNT 3/4/1926, pg. 1+, pg. 22-picture)

Henningsen Creamery Co. (Tacoma); Fires--Tacoma--1920-1930; Fire fighting--Tacoma--1920-1930;

On July 26, 1926, the "Cacique," an oceangoing cargo ship was pictured at the Tidewater Mill Co. The ship is being loaded with lumber for export. The Tidewater Mill was located on the east side of the Hylebos Waterway, at the end of 11th St. Over 3/4 of its timber was destined for export. In the foreground can be seen several large logs being floated to the mill for processing. The Tidewater was only one of a few mills on the Pacific Coast able to process large logs. (TDL 12/22/1918, pg. B-8) G49.1-086

Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Cargo ships--1920-1930; Shipping--Tacoma--1920-1930;

On June 12, 1924, two unidentified workers lean their hands against the enormous cut log which will soon be hoisted and processed. The log will be made into sheets of plywood to be used by the Pacific Mutual Door Co. This photograph, in addition to a number of plywood operations shots, was taken in Olympia on behalf of the company. G75.1-027

Logs; Lumber industry--Olympia--1920-1930; Hoisting machinery;

Ship propeller. Three unidentified men stand between the blades of a ship propeller at Todd Dry Dock & Construction's plant along the Hylebos Waterway in July of 1924. Todd Dry Dock's employees consisted of shipbuilders, engineers and boilermakers. TPL-1424; G37.1-118

Boat & ship industry--Tacoma--1920-1930; Todd Dry Dock & Construction Corp. (Tacoma);

Stern of the SS Bienville. The Bienville would be launched the following day, July 16, 1924, from Todd Dry Dock & Construction facilities. The combination freighter/passenger vessel, 445 feet in length with a 57-foot beam, could hold 346 passengers. She was built at a cost of over one million dollars and would be used to travel between New York and New Orleans. The Bienville would catch on fire in mid-March of 1925 while being overhauled in New Orleans. The ship was ablaze from stem to stern but all aboard escaped. G37.1-113 (TNT 6-21-24, p. 1,9-articles; TNT 3-19-25, p. 1-article on fire; TDL 3-28-25, p. 1-article on fire)

Boat & ship industry--Tacoma--1920-1930; Boats--Tacoma--1920-1930;

Two unidentified men gaze at giant wheel constructed at Coast Iron & Machine Works, 1117 Dock St., in August of 1924. The machinery firm was operated by J.A. McRae and R.C.McRae. G35.1-088

Coast Iron & Machine Works (Tacoma);

Small boat under construction at Babare Mfg. Co. site in August of 1924. The Babare brothers, George & Nick, were pioneer shipbuilders with original plant in Old Town. They had moved their facility to 3517 E. 11th St. along the Hylebos Waterway. G37.1-106

Boat & ship industry--Tacoma--1920-1930; Boats--Tacoma--1920-1930;

ca. 1920. Smelter operations at ASARCO. Steam rises as ore is poured via hoisted ladle onto giant cylinders at the American Smelting & Refining Co.'s plant in Ruston circa 1920. Other large ladles are on the floor waiting to be filled with ore. TPL-899; G37.1-184

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1920-1930; Industrial facilities--Tacoma--1920-1930;

ca. 1920. Smelter operations at ASARCO. These employees of the American Smelting & Refining Co. (ASARCO) are carefully monitoring what may be the pouring of molten ore in this circa 1920 photograph. It seems to have caught the attention of several other workers in the area. TPL-2351; G37.1-191

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1920-1930; Industrial facilities--Tacoma--1920-1930;

In March of 1920, a steam donkey on a sled was photographed for the West Fork Logging Co. The donkey was used for pulling logs in from the woods. In its simplest form, a donkey was just a steam engine with a drum and a steel cable. The winch was used to pull in logs or load them. In this case, the boiler is mounted, along with the drums, on a sled to make the unit portable. The steam donkey replaced the logging horses and oxen with the power of steam. It was faster, cheaper and more reliable than animals. The West Fork Logging Co. was located in Mineral, about 14 miles north of Morton in Lewis County. It was owned and operated by L.T. Murray. G75.1-093; TPL-9856 (Labbe & Goe, Railroads in the Woods)

West Fork Logging Co. (Mineral); Lumber industry--1920-1930; Steam donkeys; Donkey engines;

On March 5, 1920, cameras rolled as the electric powered "Olympian" pulled out from Tacoma and made history. This marked the formal opening of the Cascade division for electrically operated trains driven by 3000-volt current supplied by the glacier streams of the Cascades. Over 100 guests from Tacoma and Seattle (railroad officials, newsmen and politicos) were aboard a special pilot train that preceded the Olympian. The Olympian made its maiden electric powered ascent through the passages of the snow draped Cascades to its summit where the special train was sidetracked so the Olympian could continue on to Chicago. The special train would travel to Cle Elum and back to Tacoma. The Chicago, Milwaukee & St. Paul train reached speeds up to 60 mph with barely any effort and without puffs of black smoke. It descended as smoothly as it ascended, proving that cross country electrical trains were viable. G44.1-080 (TDL 3/6/1920, pg. 3; TNT 3-6-20, p. 1) TPL-2376

Railroad cars--Tacoma; Railroad locomotives--Tacoma; Railroad companies--Tacoma; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma); Railroads--Tacoma--1920-1930;

An unidentified mill in Tacoma's Tideflats was photographed by Marvin Boland in March of 1921. No workers are in sight. Piles of lumber are stacked throughout the yard. G36.1-043

Lumber industry--Tacoma--1920-1930; Mills--Tacoma;

Two photographs were artfully combined in this March, 1936, work by photographer Marvin Boland. Large logs are pictured aboard an open railroad car on tracks while in the background are three unidentified men posed at the base of an enormous old-growth tree. TPL-2117; G75.1-081

Logs; Lumber industry--1930-1940; Trees;

This is a view of St. Regis logging operations in May of 1936. The forest location was not given. Here a worker is driving an earthmover of some sort. He is possibly clearing the way for a makeshift road so that trucks could access the area.

Lumber industry--1930-1940; St. Regis Paper Co.; Machinery;

Logging equipment at a Peterman logging site, location at or near Morton, in June of 1936. Equipment is a "donkey" used to move logs. These early diesel yarders were designed to yard logs to a landing using a spar tree. The "donkeys" were mounted on sleds made out of two logs which allowed them to be moved on trucks or railcars. It was possible for them to pull themselves over rough grounds to where they needed to be set up. This diesel yarder is possibly one of the first "Berger" brand yarders with the first V8 Caterpillar engine power plant. TPL-9855; G75.1-046 (Additional information provided by a reader)

Lumber industry--1930-1940; Donkey engines; Peterman Manufacturing Co. (Tacoma);

This internal view of St. Regis was taken in December of 1936. The location was not specified but it is believed to be the big paper mill at 801 Portland Ave., the former location of Union Bag & Paper Co. This particular view shows wet floors, drains, and machinery on both sides. It is possible that a washer had broken causing the wetness. TPL-6802; G37.1-013

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--Tacoma--1930-1940; Mills--Tacoma--1930-1940; Machinery;

Lumber operations at St. Regis. Although photographer Boland's notes do not mention the location of this particular St. Regis Kraft Co. plant, it is probably the large concern in Tacoma as photographed in December of 1936. The Tacoma plant had been transformed into a modern facility for the production of 60,000 tons of bleached pulp per year. The company had spent a million dollars for new machinery and reconstruction. The pulp plant was operating by the end of November, 1936, with a crew of 250. The bleaching unit would open about three months later. (T.Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--Tacoma--1930-1940; Lumber industry--Tacoma--1930-1940;

Two St. Regis employees, wearing white uniforms, are pictured at the Tacoma Kraft pulp plant on February 5, 1937. Steam is rising from some of the large unidentified machinery. St. Regis had undergone a $1,000,000 remodeling project to expand into the bleached pulp field. St. Regis was one of two pulp mills (Shaffer Pulp was the other) who manufactured high grade bleached and unbleached craft pulp for domestic and export markets. The plant was able to produce 150 tons of pulp daily. TPL-6804; G37.1-023 (T.Times 1-27-37, p.1, 5-articles on St. Regis)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940; Machinery;

Chicago, Milwaukee and St. Paul Railroad, Engine #10254. On an official test trip in March of 1920, a brand new Bi-polar engine pauses for some publicity shots. The class EP2 engine was manufactured by Alco-GE. The bi-polars were unique in design because the bi-polar fields for each motor were carried on the truck frame. The huge 265 ton, 3,240 hp bi-polars were designed specifically for passenger service in the Cascades and were an immediate success when put into service in 1920. Their top speed was rated at 70 mph and they could pull 1, 120 tons (14 cars) up a 2% grade at 25 mph. The electric locomotives were also unique in appearance, riding low on 44" drivers, and in sound, their trademark a distinctive high pitched shrill from their air whistles. (Charles and Dorothy Wood "Milwaukee Road West") G44.1-079, TPL-2379

Railroad locomotives--Tacoma; Railroad cars--Tacoma; Railroads--Tacoma; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma);

St. Paul Lumber Company crane loading a vessel at 1220 Saint Paul Ave, Tacoma

Industries; St. Paul Lumber Company; Cranes, Tideflats;

Henry McCleary Lumber Company crane isn McCleary, WA

Industries; Henry McCleary Lumber Company; Cranes; McCleary;

Bay City Lumber Company's crane in Aberdeen, WA

Industries; Bay City Lumber Company; Cranes; Aberdeen;

A lumber carrier built by Star Iron & Steel hard at work in a lumber yard in Enumclaw, WA.

Industries; Star Iron & Steel, Lumber, Enumclaw

Star Iron & Steel built lumber carrier at work in a lumber yard in Enumclaw, WA.

Industries; Star Iron & Steel; Lumber; Enumclaw;

Machinery at Star Iron &Steel Foundry at 435 E 11th St, Tacoma

Industries; Star Iron & Steel; Machinery; Tideflats

Cranes built by Star Iron & Steel for the ASARCO smelter at 5300 N 52nd St, Tacoma

Industries; ASARCO; Star Iron & Steel; Smelters;

ca. 1918. Puget Mill Co. New England style "Saltbox" houses for company employees in Port Gamble, circa. 1918. Company officials insisted on a hierarchy in housing; managers had the best homes on the highest ground, skilled workers and their families came next, immigrant workers (Scandinavian, German, Swiss, Slovaks and Greeks) arriving in the 1880's were housed on the other side of the second growth forest west and south of the town in areas known as "New England" and "Murphy's Row," unmarried men lived in bunk houses and cabins on the spit near the mill and Chinese workers lived separately out of town, as did native Americans workers. The worker housing was surrounded by picket fences and had fireplaces, electric lights, bathrooms and a water closet. Rent for a three bedroom was about $7.00 a month. (Historylink.org) Boland #21

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

Interior of a section of the Tacoma Smelter taken in March of 1919. This was the copper refinery. Copper anodes from the smelter were inserted between copper cathodes in a copper-sulfuric acid bath. Copper was transferred from the anode to the cathode. The two raised frameworks in the photograph's middle were stands for "slapping copper starter sheets" before they were inserted into the bath as cathodes. The American Smelting & Refining Co., better known by its acronym, ASARCO, was a major employer in Ruston for nearly a hundred years. G32.1-023 (Additional information provided by a reader)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma; Industrial facilities--Tacoma;