Furnace at Atlas Foundry, photographed open.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1930-1940; Steel industry--Tacoma--1930-1940;

Atlas Foundry Furnace in the closed position.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1930-1940; Steel industry--Tacoma--1930-1940;

Waste-heat boilers at Tacoma Smelter (ASARCO) showing pipes within frame work, some pipes continue to floor below.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Waste - heat boilers at Tacoma Smelter - mass of pipe within steel frame at angle. (filed with Argentum)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Waste-heat boilers at Tacoma Smelter (ASARCO) showing pipes within frame work, some pipes continue to floor below. (filed with Argentum)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Waste - heat boilers at Tacoma Smelter - mass of pipe within steel frame at angle. (filed with Argentum)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1930-1940; Copper industry--Tacoma--1930-1940; Industrial facilities--Tacoma;

Another view of construction of a new hangar on McChord Field was taken approximately September, 1954. Roof trusses and basic frame of the hangar appear to be in place at this time. A crane from Bethlehem Pacific Coast Steel Corporation carefully hoists steel components used in the building construction. Photograph ordered by Bethlehem Pacific Coast Steel Corporation.

Bethlehem Pacific Coast Steel Corp. (Seattle); Building construction; Progress photographs; Steel; Hangars;

A Bethlehem Pacific Coast Steel Corporation crane is in the process of lifting another piece of steel roof truss as work continues on the construction of new hangars on McChord Field in September, 1954. Hangars were used to house and repair aircraft. It appears that instead of being constructed of wood, they were built using steel components. Photograph ordered by Bethlehem Pacific Coast Steel Corporation.

Bethlehem Pacific Coast Steel Corp. (Seattle); Steel; Hoisting machinery; Hangars; Building construction; Progress photographs;

Ace Furnace & Steel Co. were steel fabricators whose plant was located at 3740 South Union Avenue. One of their trucks and trailers was loaded with large storage tanks when photographed in front of the company on October 16, 1954. There was plenty of advertising on the truck and trailer, and also on the tanks. The steel firm had expanded their business in the early 1930's which eventually led to including transport of their products to customers. Ace Furnace manufactured furnaces, tanks, gasoline tanks and pre-fabricated steel gas stations. According to the 1954 City Directory, Ace Furnace was owned by Alvin T. Davies; he also owned Birchfield Boiler and Tacoma Boiler Works. Photograph ordered by Ace Furnace & Steel Co.

Ace Furnace & Steel Co. (Tacoma); Trucks--Tacoma--1950-1960; Storage tanks--Tacoma; Metalworking--Tacoma; Signs (Notices);

Smoke billows out of three smokestacks at one of Bethlehem Pacific Coast Steel's Seattle plants on July 27, 1954; two other smokestacks are quiet. Bethlehem Steel produced much of the steel used in well-known landmarks: the Tacoma Narrows Bridge and the Alaskan Way Viaduct. They had several locations in Seattle including a Rolling Mill, Bolt & Nut Dept., Tank Farm, and Mill Depot. Photograph ordered by Bethlehem Pacific Coast Steel Corp., Seattle.

Bethlehem Pacific Coast Steel Corp. (Seattle); Smokestacks--Seattle;

ca. 1939. Ace Furnace and Steel Company, photograph pulled from Richards stock file. Transport trucks parked in front of company. (filed with Argentum)

Ace Furnace & Steel Co. (Tacoma); Heating & ventilation industry--Tacoma--1930-1940;

A view of the yard at George R. Marvin's plant on the Tacoma tideflats was taken on August 14, 1952. Stacks of materials used in the manufacture of cranes, special hoists and machinery of fabricated structural steel are stacked around the yard and a man is operating a mobile crane near the center. A long tank truck is seen at the rear.

George R. Marvin Co. (Tacoma); Steel industry--Tacoma--1950-1960; Hoisting machinery;

Steel and aluminum fabricating at George R. Marvin Company. The George R. Marvin Company advertised as manufacturing bridge cranes, gantry cranes, floating cranes, hammerhead cranes, special hoists and machinery of fabricated structural steel. The large, open building has railroad tracks running through the length of it. Men and equipment are working along both sides.

George R. Marvin Co. (Tacoma); Steel industry--Tacoma--1950-1960;

A huge crane is being built at Star Iron and Steel Company to be installed from the roof of a welding shack. The Star Iron and Steel Company manufactured heavy cranes and logging machinery. They made some of the largest and heaviest cranes used by the US navy and industry. Roy N. Allen was president and manager of the company at this time.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1940-1950; Hoisting machinery; Factories--Tacoma--1940-1950;

An elevated view of the huge crane being built at Star Iron and Steel Company shows the opening in the crane over which the upper trolly can move. Enormous rolls of cable on top of the crane would be used to lift heavy materials vertically and the trolly could transfer the material horizontally.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1940-1950; Hoisting machinery; Factories--Tacoma--1940-1950;

A tire with a new type of tire chains attached to it. The castings for the chains' components were made by Fick Foundry Company.

Fick Foundry Co. (Tacoma); Cast ironwork--Tacoma; Tires;

A new type of tire chains were made of heavy castings by Fick Foundry Company. Fick Foundry Company manufactured machine castings for many machinery manufacturers in the Northwest. Castings were made of grey iron, steel, bronze and aluminum. Fick Foundry was owned by Joseph M. and Samuel Fick.

Fick Foundry Co. (Tacoma); Cast ironwork--Tacoma;

Photo of a worker running a sheet of metal through a large piece of machinery at Ace Furnace & Steel Co. This machine is either a shear press or a brace press. The company was built in 1930 and was owned by Alvin T. Davies. Davies also owned North End Lockers and was the president of Birchfield Boiler Inc. and Tacoma Boiler Works. He and his wife Ellen lived on Day Island. Ace Furnace produced steel and sheet metal products- furnaces, tanks, stacks and did electrical welding.

Ace Furnace & Steel Co. (Tacoma); Iron construction--Tacoma; Iron & steel workers--Tacoma; Metalworking--Tacoma;

Exposure of large machinery dwarfing the laborers at Ace Furnace & Steel Co. This machine is either a shear press or a brace press. The company was built in 1930 and was owned by Alvin T. Davies. Ace produced steel and sheet metal products- furnaces, tanks, stacks and did electrical welding.

Ace Furnace & Steel Co. (Tacoma); Iron construction--Tacoma; Iron & steel workers--Tacoma; Metalworking--Tacoma;

The interior of the new pre-fab plant of Bethlehem Pacific Coast Steel Corporation. Ordered by Mr. Morse.

Bethlehem Pacific Coast Steel Corp. (Seattle); Factories--Seattle;

The interior of the new pre-fab plant of Bethlehem Pacific Coast Steel Corporation. Ordered by Mr. Morse.

Bethlehem Pacific Coast Steel Corp. (Seattle); Factories--Seattle;

Seven men are working at drafting tables at the new pre-fab plant of Bethlehem Pacific Coast Steel Corporation at 8501 East Marginal Way, Seattle. Ordered by Mr. Morse.

Bethlehem Pacific Coast Steel Corp. (Seattle); Factories--Seattle;

The exterior of the new pre-fab plant of Bethlehem Pacific Coast Steel Corporation. Ordered by Mr. Morse.

Bethlehem Pacific Coast Steel Corp. (Seattle); Factories--Seattle;

The interior of the new pre-fab plant of Bethlehem Pacific Coast Steel Corporation at 8501 East Marginal Way, Seattle. Ordered by Mr. Morse.

Bethlehem Pacific Coast Steel Corp. (Seattle); Factories--Seattle;

Dust collecting equipment at Tacoma Smelter. While copper was the principal product from the Tacoma plant of American Smelting and Refining Company (ASARCO), there were also by-products including gold, silver, arsenic and nickel sulphate. The acid plant which went onto production in April 1950 produced 100 tons of sulphuric acid a day that was used by the Stauffer Chemical Company in the manufacture of super-phosphate fertilizer. Ordered by American Air Filter Company, c/o R.E. Chase & Company, Mr. Warren.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1940-1950; Copper industry--Tacoma--1940-1950; Industrial facilities--Tacoma;

Dust collecting equipment at Tacoma Smelter. During 1950 the American Smelting and Refining Company added a new sulphuric acid recovery plant. Other improvements during the year included modernization of the arsenic plant and installation of new ore-handling facilities to increase capacity to 200 tons an hour, replacing facilities which had been installed before they took over the Tacoma plant in 1905. Ordered by American Air Filter Company, c/o R.E. Chase & Company, Mr. Warren.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1940-1950; Copper industry--Tacoma--1940-1950; Industrial facilities--Tacoma;

Dust collecting equipment at Tacoma Smelter. The steps taken in the production of copper and other metals at the American Smelting and Refining Company included crushing the raw materials that were delived to ASARCO by ship and by rail from all parts of the world. Following crushing the different types of concentrates and ores required for each refined metal were processed by Bedding and Roasting prior to Smelting. These processes were followed by Converting and Electrolytic Refining. Ordered by American Air Filter Company, c/o R.E. Chase & Company, Mr. Warren. (Tacoma Progress, June 1955)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1940-1950; Copper industry--Tacoma--1940-1950; Industrial facilities--Tacoma;

Interior showing smelter job in foreground, Star Iron & Steel Co., Bob Allen. Welders are at work manufacturing parts for the Tacoma smelter, American Smelting & Refining Company.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950; Welding--Tacoma--1940-1950; American Smelting & Refining Co. (Tacoma);

Exterior to be used for letterhead, Steel, Steel & Steel, Inc., Mr. Ray. The company's window advertises that they have been realtors since 1920. David C. Steel was the president and manager of the company. William S. Steel served as secretary. Walter C. Steel Company was located at the same address and was headed by W.C. Steel. This night-time view of the offices includes window displays of current listings as well as the office fixtures and furnishings. TPL-8209

Steel Steel Steel, Inc. (Tacoma); Walter C. Steel, Inc. (Tacoma); Offices--Tacoma--1940-1950; Storefronts--Tacoma--1940-1950; Window displays--Tacoma--1940-1950; Real estate business--Tacoma;

Crane in shop for Times annual edition, Star Iron & Steel, Mr. Anderson. Star Iron and Steel had just completed this Gantry crane for the Bureau of Reclamation. It had a capacity of 13 1/2 tons and a total lift of 222 feet. The crane was to be used to handle the bulkhead gates at the Marshall Ford Dam, Colorado River Project, Texas. A similar crane, with 325 ton capacity, was being built at this time for the Davis Dam on the Colorado River. (T.Times, 2/26/1948, p.32)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1940-1950; Hoisting machinery; Factories--Tacoma--1940-1950;