ca. 1953. St. Regis Paper Co. plant. The above photograph was taken of the Jacksonville, Florida, St. Regis plant in 1953, one of many that were located in the United States and abroad. Plants were carefully planned to have both rail and water transportation readily available. The new Jacksonville mill started production in January, 1953. Corrugating and liner boards were produced in tons. The one paper machine was being modified so that it could produce lightweight kraft papers as well as heavy boards. (1953 St. Regis Annual Report, p. 10)
St. Regis Paper Co. (Jacksonville, Fl.)--1950-1960; Paper industry--Jacksonville--1950-1960; Industrial facilities--Jacksonville--1950-1960;
ca. 1953. Close-up view of holding tanks at St. Regis; photograph probably taken in 1953. These tanks appear to be inter-connected with metal pipes leading from one tank to another. They may have contained pulp which would be pumped either to a plant to be bleached, to the paper mill to be made into paper or converted into pulp sheets. In another instance, the tanks might also have contained the black liquor which is removed from the pulp after much washing. Photograph ordered by IMPCO. (TNT 2-17-52, C-11)
New improvements in technology are responsible for kraft and board machines that can operate at speeds up to 1500 feet per minute and can produce a sheet that can be trimmed to 212 inches in width. These high production machines helped St. Regis Paper Co. to increase total tonnage of kraft paper and boards, thereby solidifying its position as a dependable long-term source of these products to industry customers. View of interior of Florida St. Regis plant, either in Jacksonville or Pensacola. Photograph ordered by Beloit Iron Works, Beloit, Wisconsin. (1955 St. Regis Annual Report, p. 15)
St. Regis Paper Co.; Paper industry; Machinery; Beloit Iron Works (Beloit, WI);
Interior of St. Regis plant. The kraft and pulp mill in Jacksonville, Florida, started production in January, 1953. Corrugating and liner boards were part of its output. Skilled workers were needed to run and maintain the equipment; an employee is photographed in July, 1953, possibly oiling a piece of machinery. Huge cylinder-shaped structures, possibly holding tanks, surround the worker. Photograph ordered by Stebbins Engineering & Manufacturing Co.
St. Regis Paper Co. (Jacksonville, Fl.)--1950-1960; Industrial facilities--Jacksonville--1950-1960;
ca. 1953. An immense pile of logs, many feet higher than the sturdy Chevrolet and Ford trucks beside it, remains to be loaded for delivery to the Jacksonville, Florida, St. Regis Paper Co. plant in 1953. Workers have begun to stack the logs on truck beds. Unlike the Tacoma plant who utilized log dumps in the Milwaukee Waterway, the Florida plant apparently utilized a pulpwood storage yard at its new kraft mill. The barking plant handled up to 650 cords per day of pine logs from Florida and Georgia; these cords would be consumed by the mill in producing 300-400 tons of kraft paper or boards per day. (1953 St. Regis Annual Report, p. 11)
St. Regis Paper Co. (Jacksonville, Fl.)--1950-1960; Paper industry--Jacksonville--1950-1960; Logs; Chevrolet trucks; Ford trucks;
Interior view of St. Regis. This photograph, taken on July 3, 1953, is probably the interior of the Tacoma St. Regis plant. Production in the pulp and paper industry, of which St. Regis was a major player, hit a new high of over 26 million tons of paper and paperboard during 1953. St. Regis' mills and plants nationwide operated at or near full capacity. Sales increased 10% over 1952. Photograph ordered by Ederer Engineering Co. of Seattle, manufacturers of cranes and hoisting machinery. One of their cranes is apparently being readied to be utilized in moving large roll of possibly kraft paper. (1953 St. Regis Annual Report, p. 3)
St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Industrial facilities--Tacoma--1950-1960; Hoisting machinery; Ederer Engineering Co. (Seattle);
A shirtless St. Regis Paper Co. employee clenches his gloved fists around the link belts dangling from the Yale Spur Geared Block while his co-worker stands to the rear keeping an eye on the chains. Although the men are wearing gloves and possibly steel-toed shoes, no other safety equipment appears present. Photograph was ordered by Yale & Towne Mfg. Co. and taken on June 27, 1953.
A Link Belt unit on wheels with Yale Spur Geared Block is being maneuvered by two employees of St. Regis Paper Co. on June 27, 1953. Each is holding onto the chains that suspend the long roller. Photograph ordered by Yale & Towne Mfg. Co.
The "Seaboard" pulls up next to a St. Regis Paper Co. plant, possibly located in Tacoma, in July, 1953. #1733 apparently has several tanks in tow. There are additional tanks, sans train, on an adjacent track. Photograph ordered by Johns-Manville Sales Corporation.
The Jacksonville, Florida, mill owned by St. Regis Paper Co. started up production in January, 1953. Its output included a large tonnage of corrugating and liner boards. The sole paper machine there was being modified to also produce lightweight kraft papers in addition to heavy boards. View of pulpwood storage yard and duplicate barking drums at the new kraft mill in a June 27, 1953, photograph. This photo, cropped, was used in the 1953 St. Regis Annual Report. This barking plant handled up to 650 cords per day of southern pine logs which were consumed by the mill in producing 300-400 tons of kraft paper or board per day. (1953 St. Regis Annual Report, p. 10-11)
St. Regis Paper Co. (Jacksonville, Fl.)--1950-1960; Paper industry--Jacksonville--1950-1960; Logs;
Interior of St. Regis plant. St. Regis Paper Co. had established mills in both Pensacola and Jacksonville, Florida, by 1953. 200,000 tons per year of kraft paper and board were able to be produced at these plants, helping to make the St. Regis Company become a major producer on a national basis. View of interior of a Florida St. Regis plant showing machines used to make kraft paper. Photograph ordered by Beloit Iron Works, Beloit, Wisconsin. (1953 St. Regis Annual Report, p. 10)
St. Regis Paper Co.; Paper industry; Machinery; Beloit Iron Works (Beloit, WI);
A St. Regis Paper Co. employee sprays streams of water to clean large machinery used to manufacture kraft paper at one of the company's Florida locations, either Jacksonville or Pensacola, in July, 1953. Reflection of the plant's interior can be seen on the water's surface. Photograph ordered by Beloit Iron Works, Beloit, Wisconsin.
St. Regis Paper Co.; Paper industry; Machinery; Beloit Iron Works (Beloit, WI);
ca. 1953. A shirtless worker pushes a button that will perhaps move the heavy rolls of kraft paper while a co-worker watches carefully. This 1953 photograph was probably taken in the Jacksonville, Florida, St. Regis Paper Co. plant. Each roll was apparently marked with the type of product, place of production, customer code, size, roll #, and tonnage. Roll #3 weighed 2168 pounds and was listed as "asphalting kraft."
St. Regis Paper Co. (Jacksonville, Fl.)--1950-1960; Paper industry--Jacksonville--1950-1960; Industrial facilities--Jacksonville--1950-1960;
Employees at St. Regis Paper Co. nationwide had varied assignments. This man appears to be scrutinizing sheets of pulp or paper at one of the Florida locations, either Pensacola or Jacksonville in July, 1953. Photograph ordered by Beloit Iron Works, Beloit, Wisconsin.
St. Regis Paper Co.; Paper industry; Beloit Iron Works (Beloit, WI);
Exterior view of St. Regis Paper Co. plant. This is possibly the Tacoma St. Regis plant in a photograph taken in early July, 1953. The Tacoma mill continued to supply the ever-growing pulp market with its bleached kraft pulp which had a well-deserved reputation for quality and strength. In addition, it shipped a limited quantity of unbleached kraft pulp. Photograph ordered by Johns-Manville Sales Corporation. (1953 St. Regis Annual Report, p. 11)
St. Regis Paper Co.; Paper industry; Industrial facilities; Johns-Manville Sales Corp.;
Exterior view of Florida St. Regis plant. The above photograph was probably taken at either the Jacksonville, Florida, or Pensacola St. Regis Paper Co. plant in July, 1953. Long, covered connected tunnels were possibly conveyors of chips or pulp. They were situated high above the ground on rails supported by towers. Piles of logs are glimpsed in the background. Photograph ordered by Link-Belt Co.
St. Regis Paper Co.; Paper industry; Link-Belt Co.;
A St. Regis Paper Co. employee carefully monitors the gauges on a Beloit Iron Works machine in the summer of 1953. Kraft paper is apparently being manufactured. This photograph was probably taken in one of St. Regis' southern plants, either Jacksonville or Pensacola, Florida. Photograph ordered by the Beloit Iron Works Co., Beloit, Wisconsin.
St. Regis Paper Co.; Paper industry; Machinery; Beloit Iron Works (Beloit, WI);
A long hose connected to a large storage tank has its opposite end disappear into a NYC railroad car in a June, 1953, photograph. It was taken at a St. Regis Paper Co. plant, possibly the Tacoma location. Photograph ordered by the Fuller Co., Mr. R.A. Hawk.
St. Regis Paper Co.; Storage tanks; Hoses; Railroad cars;
ca. 1953. Riegel Carolina Paper & Pulp Mill, Acme, N. Carolina. Ordered by General Electric. Mountains of timber piled up for processing into paper and pulp. What appears to be a long conveyer belt carries the timber into the mill. Hoisting machinery available for lifting the timber onto the belt.
ca. 1953. Riegel Carolina Paper & Pulp Mill, Acme, N. Carolina. Ordered by General Electric. Industrial lights illuminate the plant in this nighttime portrait.
An aerial view of St. Regis Paper Company plant showing the completed multi-wall bag plant (with the dark roof dotted with vents) and the narrow kraft-paper mill.
Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;
An aerial view of St. Regis Paper Company. Logs would be pulled up the ramp in the foreground from the log pond into the woodroom in the building close to the edge of Commencement Bay. TPL-5903
Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;
An aerial view of St. Regis Paper Company's completed multi-wall bag plant in the foreground with white walls, dark roof and small white chimneys dotting the roof.
Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;
An aerial view of St. Regis plant showing the company's new multi-wall bag plant on the right. The narrow building behind it is the kraft-pulp division. The plant is located on the Tacoma tideflats at the end of the land between the Puyallup Waterway and St. Paul Waterway. Log booms are tied together off the end of the property.
Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;
The exterior of St. Regis Paper Company's Vancouver, British Columbia, bag plant. The economy of Canada continued to expand in 1953 and St. Regis paper Company increased the production of its bags, required by the country's enlarged business activity. In addition to supplying multiwall bags, the Canadian company made available to its customers the same bag-filling and weighing machines which were manufactured and sold by St. Regis in the United States. (St. Regis Paper Co. 1953 Annual Report)
Paper industry--Vancouver, B.C.; St. Regis Paper Co. (Vancouver, B.C.);
A man is moving large rolls of preprinted paper for bags at St. Regis Paper Company's Vancouver, British Columbia, bag plant. Labels have the name "B.C. Sugar Refinery" on them. A forklift with a curved scoop on the front has been used to bring the roll to the open door and behind the door a hoist made with chains is seen lifting another roll.
Paper industry--Vancouver, B.C.; St. Regis Paper Co. (Vancouver, B.C.);
Workers are shown handling bags at St. Regis Paper Company's Vancouver, British Columbia, bag plant. A line of sewing machines have been arranged with large spools of string and bottles of glue to secure the bottom seam of the bags. TPL-3767
Paper industry--Vancouver, B.C.; St. Regis Paper Co. (Vancouver, B.C.); Sewing machines;
An elevated view of St. Regis Paper Company's new bag plant showing the covered loading dock where freight cars are being loaded. The roof has been built in a series of angled sections to allow clerestory windows to provide daylight to the interior of the plant. The Middle Waterway is seen immediately adjacent to the plant and the business district of Tacoma is seen further in the distance on the right.
St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;
Seven men and women are operating machinery at St. Regis Paper Company's new bag plant. Rolls of brown paper are seen on the far right. The paper is fed into folding machines which eject the multiple-layer tubes onto a conveyor belt on the left. Here women are removing and stacking the brown paper tubes ready for the next operation in completing the bags, sewing the ends closed.
St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;
