ca. 1918. View of the Puget Mill, left at water line, with its piles of logs and the town of Port Gamble from the Port Gamble Bay, circa 1918. The mill operated from 1853 - 1995, making it the longest continuously operating mill in the nation. The town of Port Gamble was built by the company for the use of its workers. It is one of the few remaining examples of a lumber town. In 1966, the entire town was declared a national historic site. In the background of the photo can be seen, left to right, the spire of the St. Paul's Episcopal Church, the town's twin water towers, the Queen Anne Walker-Ames House, the mill company offices & store and the Community Hall. (Historylink.org) Boland #32

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

ca. 1918. Puget Mill company owned worker housing in Port Gamble, circa 1918. On the whole, Puget Mill workers were treated better than those at other lumber mills. They were paid a fair wage and housed in modern housing with all the conveniences. These homes cost about $587.59 each to build and a three bedroom version rented for around $7.00 a month. They were surround by pickett fences to protect them from wildlife and had a fireplace, electric lights, bathroom and a water closet. (Historylink.org)

Lumber industry--Port Gamble; Puget Mill Co. (Port Gamble);

Although motorized logging trucks were becoming more common in the lumber industry, horses were still being used in August of 1919. A pair of horses are pictured above at an unidentified sawmill waiting patiently as planks are being loaded onto an open cart. Photograph ordered by the Wilson Logging Co. TPL-6636 G36.1-052

Logging industry--1910-1920; Wilson Logging Co.;

Mill operations. Interior view of machinery and wood at St. Paul & Tacoma's new sawmill on May 21, 1922. Mill "C" started operation the following day. It was the latest of improvements done by the company. The new mill had a capacity of 200,000 feet of lumber every eight hours. It was electrically operated throughout and had all the latest safety devices. (TDL 5-23-22, p. 7-article)

Lumber industry--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Machinery; Sawmills--Tacoma--1920-1930;

Rayonier, Inc., timber industry scenes, Grays Harbor, taken on behalf of Malcolm McGhie, industrial consultant, New York. Old-growth timber from possibly the Rayonier, Inc., tree farm site in Grays Harbor is being carefully loaded onto a heavy duty logging truck in July, 1964. A man in hard hat is crouching on top of the truck to guide the placement of the log.

Lumber industry--Grays Harbor--1960-1970; Rayonier, Inc. (Grays Harbor); Hoisting machinery;

In the summer of 1966, this unidentified worker was in the process of cutting through the base of an old-growth timber at a Grays Harbor property owned by Rayonier, Inc. His hard hat and gloves would provide protection while wielding the large saw. (no print on file, scan from original negative)

Rayonier, Inc. (Grays Harbor); Lumber industry--Grays Harbor--1960-1970; Logs; Saws;

This Rayonier worker appears to be making an initial cut into the base of this large tree in this photograph dating from July of 1966. Founded in 1926, the company remains one of the largest private landowners in the United States and still supplies timber to a wide variety of markets including pulp, paper, lumber, renewable energy production and other wood products. (no print on file, scan from original negative) (www.rayonier.com-article)

Rayonier, Inc. (Grays Harbor); Lumber industry--Grays Harbor--1960-1970; Saws;

Rayonier employee uses a McCulloch chain saw to cut through a tree near its base on July 20, 1966. This was on Rayonier property in Grays Harbor. (no print on file, scan from original negative)

Rayonier, Inc. (Grays Harbor); Lumber industry--Grays Harbor--1960-1970; Saws;

An unidentified Rayonier worker in hard hat runs his hand over the trunk base of an large old-growth tree in July of 1966. It looks as though his saw was used to cut down the tree located in Grays Harbor. (no print on file, scan from original negative)

Rayonier, Inc. (Grays Harbor); Lumber industry--Grays Harbor--1960-1970; Saws;

Scenes from Idaho mill. Several long plywood boards wait to be wrapped by a Potlatch Forest employee in late October, 1967. He has nearly completed wrapping one in preparation for delivery. The Lewiston mill, pictured above, has been modernized and expanded several times. Potlatch Forests was founded as a company in 1903 as Potlatch Lumber Co.; one of its initial major investors was Frederick Weyerhaeuser. It merged with two other companies in 1931 and became Potlatch Forests, Inc., with headquarters in Lewiston, Idaho. John Philip Weyerhaeuser, Jr., was its first president. Potlatch moved its headquarters to San Francisco in 1965 and then to Spokane in 1997. It is now known as Potlatch Corporation. Photograph ordered by Malcolm McGhie, industrial consultant, New York, for 1967 Potlatch Forests annual report. (ir. potlatchcorp.com)

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970; Plywood;

View of log dump and Potlatch Forests, Inc., Idaho mill. Potlatch Forest's log dump was conveniently located to its mill for easy access and transport. The logs were contained in the large pond, fenced in by tied bundles of vertical logs. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Logs;

Plywood operations at Potlatch Forests, Inc., Lewiston, Idaho, plant. Small wheels appear to jump in the air as they smooth down a large thin sheet of paper during daily operations at the Lewiston, Idaho, Potlatch Forests facility. A man in short sleeves and cords keeps a close watch on the process. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970; Plywood; Mills--Idaho--Lewiston; Machinery;

Scenes from Potlatch Forests, Inc., lumber and paper operations. Alone in a sea of logs, a worker leans as he pushes a log with his pole at the Potlatch log dump thought to be in Coeur d'Alene, Idaho. The floating logs nearly obliterate the sight of water in the large pond. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (Additional identification provided by a reader)

Potlatch Forests, Inc.; Logs; Lumber industry--Idaho--1960-1970;

Interior of Potlatch Forests, Inc., Idaho plant. A Potlatch employee is shown lifting a smooth sheet of plywood on July 8, 1968, in the Lewiston, Idaho, mill. He keeps a steady eye on the large piece of machinery with the big roller. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970; Plywood; Machinery; Mills--Idaho--Lewiston;

One man is able to move an enormous roll of paper using an Ederer crane at the Weyerhaeuser Kraft paper mill in Longview, Washington.

Mills--Longview; Weyerhaeuser Timber Co. (Longview); Lumber industry--Longview; Ederer Engineering Co. (Seattle);

St. Paul and Tacoma Lumber Company chip storage plant as viewed on September 3, 1952. Kenworth truck with trailer and two more trailers at loading bays on ground level of building.

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1950-1960; Trucks--Tacoma--1950-1960;

The exterior of one of the buildings at the Weyerhaeuser pulp mill at Longview, Washington, showing vents for the air system installed by Drew Engineering Company, Portland, Oregon. Longview was Weyerhaeuser's largest and most diversitied millsite in 1952. The site contained a plywood plant with a capacity of 6 million square feet of 3/8-inch plywood per month and a bark products plant where Silvacon was produced for use as plywood glue, rubber products, oil well drilling, mastic flooring and in plastics. The location also maintained a pulp log barker, chippers for the pulp plants, and a sulphate pulp mill with its 225 tons of bleached Kraft pulp each day. The wood fiber plant processed Silvacel for cold storage insulation and oil well drilling, and Silvawool for home and building insulation. The plant also maintained a development department and the fabrication department which turned out Monocord trusses and laminated beams. (Weyerhaeuser Magazine, June 1952)

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Drew Engineering Co. (Portland);

The interior Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing paper coming from the air dryer where the sheet of paper is carried around cylindrical driers containing high-pressure steam and the remaining water is driven off in the form of vapor in the air. From the driers the sheet passes through two calendar stacks, each consisting of several steel rolls, riding one on top of the other. The paper passes between them for the purpose of imparting a smooth finish. Further chemical treatment of the surface may also be added on one of these calendar stacks. Ordered by Drew Engineering Company, Portland, Oregon, manufacturers of industrial air systems. (Weyerhaeuser Magazine, November 1952)

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Drew Engineering Co. (Portland); Machinery; Fans (Machinery);

An elevated view of Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing the "wet end" of the paper producing process. Prepared pulp is evenly distributed on a fine, large, bronze wire woven as an endless belt 130 feet long and 216 inches wide and traveling at a speed of several hundred feet a minute. The sheet of paper is actually formed on this wire when the water carrying the pulp fibers drains away and leave a wet mat of felted pulp fibers. By means of a wide, heavy woolen felt traveling continuously through the section of the paper machine known as the press rolls, the wet sheet is carried from the wire, additional water is removed by pressing and a damp sheet is delivered to the next section of the machine known as the drier section. (Weyerhaeuser Magazine, November 1952)

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Machinery;

A man is operating a Thwing-Albert Electro-Hydraulic Tensile Tester and recording the results of the tests at Weyerhaeuser's Kraft plant in Longview, Washington. He is holding a pencil in his right hand as he turns the equipment off and on.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Product inspection--Longview; Equipment;

Two men and their sedan are dwarfed by the towering timber in forests near Mineral on August 2, 1960. They were there to observe timber and logging operations of the St. Regis Paper Co. St. Regis had plants in both the United States and Canada, including a longtime location in Tacoma. This is a typical stand of old growth, mostly Douglas fir, which supplied the company's pulp and paper mill, sawmill and plywood plant operations in Tacoma. The Richards photograph above was used in St. Regis' 1960 annual report. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (1960 Annual Report, p. 2)

Trees; Lumber industry--Tacoma--1960-1970; St. Regis Paper Co. (Mineral);

A 12' log rests on the floor of Puget Sound Plywood Corporation's plant in December, 1960, as a much smaller log, with the help of chains and a winch, is being deposited behind it. An employee of the cooperative plywood company carefully maneuvers the log into position. Markings on the gigantic log indicate that the volume of the log is 2000 board feet. Photograph ordered by Douglas Fir Plywood Association.

Logs; Puget Sound Plywood, Inc. (Tacoma); Lumber industry--Tacoma--1960-1970; Cooperatives--Tacoma;

Five unidentified men stand outside of a Weyerhaeuser Co. building believed to be part of their warehouse operations on September 23, 1963. Weyerhaeuser may have furnished the wood for production of plywood Santas in time for the Christmas season. Photograph ordered by Cole & Weber Advertising.

Weyerhaeuser Timber Co. (Tacoma);

Two members of Douglas Fir Plywood Association appear to be discussing the merits of a golf club in early June, 1958. The Association was holding its 22nd annual meeting, that year in Gearhart, Oregon, with a golf tournament as part of the activities. New officers of the association would be elected during the three-day conference. Photograph ordered by Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Golf--Oregon--Gearhart; Golfers--Oregon--Gearhart;

Exposure of logging operation at St. Paul & Tacoma and St. Regis Paper Co.; photographs ordered by Malcolm McGhie. In a typical landing, a truck is being loaded with logs yarded from the surrounding area by the high lead system, using a "spar tree." St. Regis and St. Paul & Tacoma merged in 1957 with St. Regis becoming the parent company.

Lumber industry--Tacoma--1950-1960; Cutover lands; Logs; St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;

Exposure of logging operation at St. Paul & Tacoma and St. Regis Paper Co.; photographs ordered by Malcolm McGhie. A crane machine with a grappling arm is being used to load a logging truck. In the background is a "spar tree," also used for moving timber. TPL-8292

Lumber industry--Tacoma--1950-1960; Cutover lands; Logs; St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;

SR18, I-5 and the Weyerhaeuser Corporation headquarters as seen by air on March 27, 1975. I-5 is highway at the top of the photograph. The 500-acre Weyerhaeuser complex is on the right hand side of the photograph; pond in vicinity is unnamed. Photograph ordered by Puget Sound National Bank.

Weyerhaeuser Timber Co. (Federal Way); Express highways--Wash.; Aerial views;

Ben Cheney (in glasses) and Gene Grant admire part of the first truckload of studs that have arrived at Cheney Lumber's new plant in mid-December, 1969. An unidentified Cheney Lumber employee in hardhat stands by the Hyster forklift. Photograph ordered by Cheney Lumber Co.

Cheney Lumber Co. (Tacoma); Cheney, Ben B., 1905-1971; Grant, R. Gene; Hoisting machinery; Lumber--Tacoma--1960-1970;

A miniature model of a plywood making work room on display at the Douglas Fir Plywood Association Circus. Dolls are exhibited processing the lumber into plywood.

Exterior shot of the Douglas Fir Plywood Association Circus. A banner outside displays the words "Plywood Jubilee" and "Free Show." A mural along the from of the structure depicts a magician turning a tree into plywood.