Star Iron & Steel, general view around shop. On July 18, 1968, Star Iron & Steel was in the process of constructing a 250-ton bridge crane for Kerr Lock & Dam, located in Oklahoma. They had also just landed a 6.4 million dollar contract to build four 100-ton floating cranes for the Navy. Star Iron & Steel was well known for their custom designing and manufacturing of hoists and cranes. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

Three trucks stand ready at the loading dock of the new Shasta bottling plant in Tukwila on July 12, 1968. The trucks, from Albertson's and West Coast Grocery, are backed in, prepared to be filled with cases of bottled and canned sodas. A single gas pump is available in case the trucks need more fuel. Photograph ordered by Meltzer, Aron & Lemen, San Francisco.

Bottling industry--Tukwila; Beverage industry--Tukwila; Trucks--Tukwila;

Scenes from Potlatch Forests, Inc., Lewiston, Idaho plant. Two men are walking inside the enormous open-air concrete "bowl" located on Potlatch property in Lewiston, Idaho. Others are busy putting finishing touches on the retaining walls and on what may be a conveyor system extending to the plant. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970;

Plywood operations at Potlatch Forests, Inc., Idaho location. Glued and layered sheets of wood veneer are in the process of being processed on July 8, 1968. One worker is shown lifting a sheet of plywood into place onto one of three large stacks. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970; Plywood; Mills--Idaho--Lewiston;

Shasta beverage operations. Shasta opened a new bottling plant in Tukwila in 1968. Two forklifts are shown on July 12, 1968, busy lifting and stacking cases of Cragmont soda. The soda, diet Orange, diet Cola and Black Cherry , came in both cans and no-deposit, no-return bottles. Photograph ordered by Meltzer, Aron & Lemen, Inc., San Francisco.

Bottling industry--Tukwila; Beverage industry--Tukwila; Carbonated beverages; Hoisting machinery;

Early evening exposure of Potlatch Forests, Inc., Lewiston, Idaho plant. Richards Studio had made several trips over the years to Idaho to photograph Potlatch Forests, Inc., pulp and paper operations. The above photograph was taken in July of 1968 for Malcolm McGhie, industrial consultant, New York. Potlatch operations continued even at night as the resulting smoke from stacks can testify. The bright lights of the mill reflect on the nearby water's surface.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970;

Pulp & paper operations in Lewiston, Idaho. A Potlatch Forests, Inc., employee arranges sheets of plywood into three separate stacks during his work shift on July 8, 1968. These plywood sheets will be lowered onto the conveyor belt below and placed next to other stacks. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970; Plywood; Mills--Idaho--Lewiston;

New Shasta bottling plant, Tukwila. On July 12, 1968, two men monitor the controls of bottling equipment and conveyor systems at the new Shasta bottling plant in Tukwila. Long conveyor belts send the canned soda onward to be later boxed and transported. Photograph ordered by Meltzer, Aron & Lemen, Inc., San Francisco.

Bottling industry--Tukwila; Beverage industry--Tukwila; Conveying systems--Tukwila; Carbonated beverages;

Interior of Potlatch Forests, Inc., Idaho plant. A Potlatch employee is shown lifting a smooth sheet of plywood on July 8, 1968, in the Lewiston, Idaho, mill. He keeps a steady eye on the large piece of machinery with the big roller. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Potlatch Forests, Inc. (Lewiston, ID); Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970; Plywood; Machinery; Mills--Idaho--Lewiston;

A Consolidated truck, loaded with "fertilizer," is parked outside the old Sperry Mill on Bayside Drive in mid-February, 1969. The Sperry plant was owned by General Mills. Its flour mill had closed in July of 1965. Photograph ordered by Export Pacific, Inc.

General Mills, Inc., Sperry Division (Tacoma); Trucks--Tacoma--1960-1970;

Launching sponsor. Miss Tacoma of 1969, Terri Louise Bale, raises her wrapped bottle of champagne prior to christening the Martinolich Shipbuilding Corp.'s new tugboat, the "Betsy L," on Saturday, December 21, 1968. The tugboat was built for Knappton Towing Co. of Portland. Miss Bale, age 19 and a Tacoma Community College freshman, was crowned Miss Tacoma on November 30, 1968 at the Fellowship Hall. A self-taught pianist, she won the talent contest. She is the daughter of Mr. and Mrs. Richard G. Bale. Photograph ordered by Martinolich Shipbuilding Corp. (TNT 12-1-68, p. 1, TNT 12-2-68, p. 6, TNT 12-22-68, C-19)

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Martinolich Shipbuilding Corp. (Tacoma); Tugboats--Tacoma--1960-1970; Bale, Terri Louise; Beauty contestants--Tacoma--1960-1970;

Smoke drifts from the new 500-foot stack at the Kaiser Aluminum plant on Tacoma's Tideflats in late October, 1968. Kaiser was undergoing a period of expansion that would see a new aluminum rod mill open for production in December of 1968. Hylebos Waterway is adjacent to the plant on left side of photograph. Photograph ordered by Kaiser Engineers.

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hylebos Waterway (Tacoma); Aerial views;

Two men are boarding the small craft "Mary Ann" as a third man yanks a cable on the newly launched "Trap Servicing" vessel built for Tacoma City Light for use when completed at Mossyrock Dam. The workboat was successfully launched at the Port of Tacoma's Industrial Yard on November 13, 1968. Photograph ordered by Star Marine Industries.

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Boats--Tacoma--1960-1970; Star Marine Industries (Tacoma);

Boat launching. Standing in front of the new fishing boat, the "Conquest," were the principal parties honored at the ship's launching on October 23, 1968. From L-R are J.S. Martinac, Mrs. Joseph Madruga, Mr. Madruga, and an unidentified man. The 165-foot vessel was built by the J.M. Martinac Shipbuilding Corporation for Joseph Madruga. Mrs. Madruga, holding a bouquet of long stem red roses, was the ship's sponsor. After undergoing sea trials, the "Conquest" would be delivered to the Madrugas in January of 1969. She would fish in the San Pedro, California, area, with Richard Madruga, Joseph's brother, as captain. Photograph ordered by the J.M. Martinac Shipbuilding Corp. (TNT 10-24-68, A-3) TPL-9194

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; J.M. Martinac Shipbuilding Corp. (Tacoma); Fishing boats--Tacoma--1960-1970; Madruga, Joseph--Family; Martinac, J.S.; Roses--Tacoma;

A smiling Mrs. Joseph Madruga poses in front of the tuna seiner, "Conquest," on October 23, 1968. The 165-foot fishing vessel, built by J.M. Martinac Shipbuilding Corporation, was launched that day. Mrs. Madruga, clutching an enormous bouquet of long stem red roses, was the ship's sponsor and christened the "Conquest" with the traditional bottle of champagne. She was the wife of the boat's managing owner. Assisting Mrs. Madruga in the christening was Mrs. Richard Madruga, wife of the ship's captain. The Madruga brothers would fish for canneries in the San Pedro, California, area. Designed for a crew of 14, she would be delivered to her owner in early 1969. Photograph ordered by the J.M. Martinac Shipbuilding Corp. (TNT10-24-68, A-3) TPL-9223

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; J.M. Martinac Shipbuilding Corp. (Tacoma); Fishing boats--Tacoma--1960-1970; Madruga, Joseph--Family; Roses--Tacoma;

Launching. Champagne sprays across the bow of the "Kerri M" as she is christened on December 14, 1968, at the Port Industrial Yard. 10-year-old Kerri Medina, daughter of captain/owner Harold Medina, did the honors. The $1.8 million dollar fishing boat was scheduled for delivery to her San Diego owner early in 1969. The "Kerri M" was the last of a series of three federally subsidized tuna seiners built by Tacoma Boatbuilding. The U.S. Maritime Commission paid 48% of the cost under the Fishing Fleet Improvement Act of 1964. Photograph ordered by Tacoma Boatbuilding. (TNT 12-15-68, C-23) TPL-9221

Launchings--Tacoma--1960-1970; Fishing boats--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Medina, Kerri;

Launching. Proudly standing before the ship bearing her name, 10-year-old Kerri Medina cradles a bouquet of long stem red roses and a wrapped bottle of champagne. Kerri would be the fishing boat's sponsor and would christen the vessel's bow with the champagne. Standing next to Kerri is her sister, Judy; she probably acted as the sponsor's attendant. Kerri's father, Harold Medina of San Diego, was the ship's captain/owner. The 176-foot tuna seiner cost $1.8 million; nearly half of the cost was paid by the federal government under the Fishing Fleet Improvement Act of 1964. (TNT 12-15-68, C-23) TPL-9222

Launchings--Tacoma--1960-1970; Fishing boats--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Medina, Kerri; Roses--Tacoma;

Launching. One week after her sister-ship the "Cheryl Marie" slid down the ways at the Port Industrial Yard, the "Kerri M" was successfully launched at 11:30 a.m. on December 14, 1968. She was the last of a series of three federally subsidized tuna seiners built by Tacoma Boatbuilding, each costing $1.8 million. The 176-foot fishing boat was scheduled for delivery early in 1969 to owner Harold Medina of San Diego. The vessel was named after the 10-year-old daughter of the captain/owner. (TNT 12-15-68, C-23) TPL-9220

Launchings--Tacoma--1960-1970; Fishing boats--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Tacoma Boat Building Co., Inc. (Tacoma);

Exterior of new aluminum rod mill at Kaiser Aluminum. Kaiser gradually phased in their new aluminum rod mill with its first rod being formed in a test run in December, 1968. The completely automated mill would produce rod at a rate of 1,800 feet a minute. Kaiser would produce the first semi-fabricated aluminum product for Tacoma. Photograph ordered by Kaiser Engineers, Inc. (TNT 12-8-68, A-7)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

Propeller of "Cape San Vincent." The "Cape San Vincent" was launched in the pre-dawn hours of March 20, 1969, into the City Waterway. The tuna seiner was built by the J.M. Martinac Shipbuilding Corporation for Edmund A. Gann of California. The 165-foot fishing boat could carry a crew of 14 and was equipped with a 2800 horsepower General Motors diesel main engine. She had a 650-ton frozen tuna capacity and was scheduled to be delivered to her owner in late spring. Photograph ordered by the J.M. Martinac Shipbuilding Corp. (TNT 3-9-69, C-27; TNT 3-20-69, C-16) TPL-9398

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Fishing boats--Tacoma--1960-1970; J.M. Martinac Shipbuilding Corp. (Tacoma);

Launching of the "Cape San Vincent." The "Cape San Vincent" was successfully launched in the early morning hours of March 20, 1969, from the J.M. Martinac Shipbuilding yard. She slid down the ways into the City Waterway. Martinac Shipbuilding was busy at this time with five tuna seiners under construction, three of them built with federal funds. The "Cape San Vincent," 165 feet in length, could carry a crew of 14. She would be turned over to her owner, Edward A. Gann of Southern California, in late spring and used to fish in the San Pedro area. Photograph ordered by J.M. Martinac Shipbuilding Corp. (TNT 3-9-69, C-27; TNT 3-20-69, C-16) TPL-9397

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Fishing boats--Tacoma--1960-1970; J.M. Martinac Shipbuilding Corp. (Tacoma);

Boat launching. Mrs. Edmund A. Gann of California did the honors in christening the 165-foot tuna seiner, "Cape San Vincent," at 5:30 a.m. on March 20, 1969 at the J.M. Martinac Shipbuilding's yard. She is pictured breaking the traditional bottle of champagne across the ship's bow. Mrs. Gann is the wife of the "Cape San Vincent's" owner. Photograph ordered by the J.M. Martinac Shipbuilding Corp. (TNT 3-9-69, C-27; TNT 3-20-69, C-16) TPL-9394

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Fishing boats--Tacoma--1960-1970; J.M. Martinac Shipbuilding Corp. (Tacoma); Gann, Edmund A.--Family;

Boat launching. An interested crowd listens as launching ceremonies continue pre-dawn on March 20, 1969, at the J.M. Martinac Shipbuilding yard. The "Cape San Vincent," a 165-foot tuna seiner, awaits launching on the City Waterway. The ship, with a frozen tuna capacity of 650 tons, is scheduled for delivery to owner Edward A. Gann in late spring. She will be used to fish in the San Pedro, California, waters. The "Cape San Vincent" is one of five tuna seiners under construction at Martinac Shipbuilding; three of these are being built under a federal subsidy program. Photograph ordered by J.M. Martinac Shipbuilding Corporation. (TNT 3-9-69, C-27, TNT 3-20-69, C-16) TPL-9396

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Fishing boats--Tacoma--1960-1970; Public speaking--Tacoma--1960-1970;

A small "Trap Servicing" boat built for use at Tacoma City Light's Mossyrock Dam is successfully launched on November 13, 1968. Two men appear to be disconnecting the cables from the large crane that had carefully lowered the workboat into the Port Industrial Waterway. The 36-foot craft was built for $61,400 wtih Peterson Boatbuilding Co. as prime contractor and with Star Marine Industries subcontracting the hull. Photograph ordered by Star Marine Industries. (TNT 11-14-68, C-8)

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Hoisting machinery; Star Marine Industries (Tacoma);

Kaiser Aluminum plant aerials. Kaiser Aluminum, located at 3400 Taylor Way in the Tideflats, had resumed production in 1964 after being closed for six years. They were still expanding in 1968 when the above aerial photograph was taken. Hylebos Waterway and Northeast Tacoma in background. Photograph ordered by Kaiser Engineers. TPL-4741

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Aerial views; Hylebos Waterway (Tacoma);

Closer aerial view of Kaiser's Tacoma plant located at 3400 Taylor Way in the industrial Tideflats. Taken on October 30, 1968, photograph emphasizes the height of what is believed to be the 500-foot stack recently constructed. Hylebos Waterway in background. Photograph ordered by Kaiser Engineers. TPL-6580

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Aerial views; Hylebos Waterway (Tacoma);

Boat sponsor. Cradling the traditional spray of long stem red roses, Mrs. Edmund A. Gann poses in front of her husband's new fishing boat, the "Cape San Vincent" on March 20, 1969. Mrs. Gann was the ship's sponsor and performed the christening duties upon the 165-foot tuna seiner. The vessel had a 650-ton frozen tuna capacity and was scheduled for delivery later in the spring. J.M. Martinac Shipbuilding Corp. built the "Cape San Vincent;" it was one of five tuna seiners under construction at the Martinac yard. Photograph ordered by J.M. Martinac Shipbuilding Corp. (TNT 3-9-69, C-27; TNT 3-20-69, C-16) TPL-9395

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Fishing boats--Tacoma--1960-1970; J.M. Martinac Shipbuilding Corp. (Tacoma); Gann, Edmund A.--Family; Roses--Tacoma;

A different kind of launching than what is usually photographed occurred at the "Trap Servicing" boat launching held at the Port of Tacoma's industrial yard. Instead of immense fishing boats or Navy gunboats, this launching featured a small 36-foot workboat built for use at Tacoma City Light's Mossyrock Dam. A large crane steadily lowers the vessel on November 13, 1968. Peterson Boatbuilding Co. was the prime contractor of the $61,400 craft; Star Marine Industries subcontracted the hull. Photograph ordered by Star Marine Industries. (TNT 11-14-68, C--8)

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Hoisting machinery; Star Marine Industries (Tacoma);

View of the tuna seiner "Conquest" prior to launching. A crew member peers over the bunting-decorated bow. Built by the J.M. Martinac Shipbuilding Corporation, the 165-foot fishing vessel was ready to be launched on October 23, 1968. She was powered by a 2800-horsepower diesel engine and had a frozen fish capacity of 650 tons. The "Conquest" would be delivered to her owner, Joseph Madruga, in early 1969. The ship's captain was Richard Madruga, Joseph Madruga's brother. Photograph ordered by the J.M. Martinac Shipbuilding Corp. (TNT 10-24-68, A-3) TPL-9193

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; J.M. Martinac Shipbuilding Corp. (Tacoma); Fishing boats--Tacoma--1960-1970;

Terri Louise Bale, wearing her crown as Miss Tacoma, closes her eyes against the spray of champagne as she christens the new Martinolich built tugboat, the "Betsy L," on December 21, 1968 at Martinolich Shipbuilding's Taylor Way shipyard. The tug was built for Knappton Towing Company of Portland, Oregon. Miss Bale was crowned Miss Tacoma for 1969 by the Tacoma Jaycees in November, 1968. (Photograph ordered by Martinolich Shipbuilding Corp.) (TNT 12-22-68, p. C-19)

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Tugboats--Tacoma--1960-1970; Martinolich Shipbuilding Corp. (Tacoma); Bale, Terri Louise; Beauty contestants--Tacoma--1960-1970;