Molten showers were not an unusual occurrence at the Bethlehem Pacific Coast Steel works in Seattle. The steel manufactured at Bethlehem's facilities was used in many structures locally, including the Alaska Way Viaduct and the Tacoma Narrows Bridge. The Bay area's Carquinez Straits Bridge utilized Bethlehem Corporation's steel in the approaches to the bridge and Bethlehem's shipbuilding division in Quincy, Mass., produced the steel used in 25,000 to 106,500-ton tankers. Bethlehem plants nationwide were booming and a new basic steel research center was being built in the adjoining site to Lehigh University in Pennsylvania to carry on vital new research projects. (TNT ad, 1-2-58, B-8)

Bethlehem Pacific Coast Steel Corp. (Seattle); Steel industry--Seattle; Industrial facilities--Seattle;

Bethlehem Pacific Coast Steel's works were booming in the 1950's, necessitating a $25 million dollar expansion in Seattle, as well as improvements and new construction elsewhere. New electric furnaces promised to boost steelmaking capacity 70% to 420,000 tons annually. Workers are pictured on March 6, 1958, seemingly dwarfed by the size of the huge equipment used in the Seattle plant. A cascade of sparks and smoke stream from an open hearth. The men are wearing hard hats and long coats for protection.

Bethlehem Pacific Coast Steel Corp. (Seattle); Steel industry--Seattle; Industrial facilities--Seattle;

An employee of Ace Furnace & Steel Co. leans one arm against a massive steel jet propulsion fuel storage tank on company property on August 5, 1958. He appears diminutive when contrasted with the 10.6 foot diameter tank. The gas tank measures 77.5 feet in length. Ace Furnace produced steel storage tanks for oil, gasoline and water, stacks, marquees, canopies, steel heating and ventilation systems, boilers, furnaces, and marine sheet metal. The company's major output now are tanks of all sizes, approximately 400-800 tanks per month. The huge tanks pictured above were just built for McChord Air Force Base. It is estimated that these were the largest shop fabricated steel tanks ever built in Tacoma. The Northern Pacific cars in the background would make transportation of these heavy steel products easier and more efficient. Photograph ordered by Ace Furnace & Steel Co. (TNT 9-1-58, C-7)

Ace Furnace & Steel Co. (Tacoma); Steel industry--Tacoma; Storage tanks--Tacoma; Railroad freight cars--Tacoma--1950-1960;

Dirt pours out of the opened clam shovel which is suspended by thin cables in this July 31, 1962, photograph taken at Graystone of Tacoma. The shovel is believed to have been manufactured by the Star Iron & Steel Co. of Tacoma. Star Iron built cranes and specialized equipment to handle everything from salmon to missiles; their products were used in WWll to help clear the Pearl Harbor disaster. Its crane capacities ranged to more than 350 tons. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

Architectural office of Star Iron & Steel Co. Men are shown working at desks with architectural plans spread out. One large table in the foreground has an architectural blueprint held down by a book of standards and notepad. Star Iron's new one-story office building was separated from the 100,000 square foot plant to reduce noice level. Star Iron had been in the Tacoma area for decades and was one of the oldest steel fabricating firms in the Pacific Northwest. They built cranes and specialized equipment to handle everything from salmon to missiles. Crane capacities ranged to more than 350 tons. Besides cranes, the company made radio, tv, and power transmission towers, steel for buildings and bridges, and equipment for the lumber industry including log barkers, hydraulic presses, power operated grapples and chip handling buckets. Photograph ordered by Bethlehem Pacific Coast Steel. (TNT 9-1-61, B-10, TNT 7-24-63, A-11)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Offices--Tacoma--1960-1970; Blueprints; Books;

Exterior - Star Iron & Steel. Star Iron & Steel Co. would move into new quarters in the Port Industrial area in 1963. Bldg. 407 shown above in this April 9, 1963, photograph, held the company's offices, which were in a separate building from the large plant. Owned by Edward N. Allen, Star Iron was one of the oldest steel fabricating companies in the Pacific Northwest. They specialized in building cranes, hoists, towers, and equipment for the lumber industry. During WWII, they made some of the heaviest and largest cranes for the U.S. Navy. Photograph ordered by Bethlehem Pacific Coast Steel. (TNT 7-24-63, A-11)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Facades--Tacoma--1960-1970; Signs (Notices);

Pencil in hand, an architect at Star Iron & Steel Co. surveys a model of a steel sign and girts on April 9, 1963. His glasses rest on a large sheet holding design data. Besides being well-known for their hoisting machinery, Star Iron also built towers, fabricated structural steel for buildings, bridges, and grandstands, and equipment for the lumber industry. They moved from their longtime location on E. 11th St. to Alexander Avenue in the Port Industrial area in 1963. Photograph ordered by Bethlehem Pacific Coast Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Architectural models; Blueprints; Eyeglasses;

Star Iron & Steel - complete engineering, structural shop and machine shop facilities. Notes from the Richards Studio indicate that their photographer took this April 13, 1963, view of the new Star Iron & Steel Co. facilities from one of the company's own overhead cranes. Several cranes and steel structures are visible as well as the waterways separating the industrial Tideflats area from downtown businesses. Star Iron had moved from its longtime E. 11th St. location to the Port Industrial area that year. The new plant was ideally located for shipment of its products by truck, rail or water. Employment at the plant had apparently more than tripled from 63 to 250 since the move to a new location. It had cost $500,000 to double the plant capacity. Star Iron & Steel was one of the oldest steel fabricating businesses in the Pacific Northwest, having been founded in 1908. It specialized in custom design and manufacture of cranes, hoists, and special machinery. Star Iron's products were shipped for installation throughout the United States and also to foreign countries. There was a total of 97,000 square feet under roof currently being used with another 54,000 square feet available for future expansion. (TNT 7-24-63, A-11; SIS booklet, c. 1965)

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970; Hoisting machinery;

Interior of Star Iron & Steel plant. Elevated view on May 1, 1963, of interior of the Star Iron & Steel plant shows fabricated steel products ready to be assembled. Star Iron, well-known for crane construction, also made towers, hydraulic presses, power operated grapples, and fabricated steel for buildings, bridges and grandstands. They had built a larger plant on Alexander Avenue in 1963.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970;

Close-up of the bridge end trucks of the 275-ton powerhouse crane built by the Star Iron & Steel Co. of Tacoma for the Barkley Power Plant on Kentucky's Cumberland River. This July 15, 1963 photograph is a cropped view of A-138737-3, and was taken for a government report.

Star Iron & Steel Co. (Tacoma);

Photographs were requested for a government report concerning the construction of a 275-ton powerhouse crane by Star Iron & Steel Co. of Tacoma. The crane was ordered for the Barkley power plant on Kentucky's Cumberland River. This July 15, 1963, photograph shows the main hoist blocks and auxiliary hoist blocks.

Star Iron & Steel Co. (Tacoma);

Part of a series of photographs of a 275-ton powerhouse crane constructed by Star Iron & Steel Co. of Tacoma for the Barkley Power Plant on the Cumberland River. This July 15, 1963, view is described as the general arrangement and trolley with main and auxiliary hoists.

Star Iron & Steel Co. (Tacoma);

Interior of new Star Iron & Steel Co. plant on Alexander Avenue. Richards Studio notes indicate these are "fixed wheel gates" in process of being assembled. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970;

A "Porta Tower" built by Star Iron & Steel extends at a 45 degree angle in a September 19, 1963, photograph taken outside company headquarters. Porta Towers were described as mobile steel spur trees that replaced spar trees in logging operations. A "Porta Tower" could be erected and ready to work in two hours, much less time than it would take to rig a spar tree. Photograph ordered by Star Iron & Steel. (TNT 10-13-63, B-9)

Star Iron & Steel Co. (Tacoma); Steel;

Built by Star Iron & Steel, an imposing 90 foot "Porta Tower" is parked outside of company headquarters on September 19, 1963. Star Iron & Steel was well known for its crane and tower construction. The "Porta Towers" would be utilized as mobile steel spur trees. "Porta Towers" were self-erecting and ready to work in two hours. Star Iron & Steel had been founded in 1908 at 435 E. 11th St. It moved to its new quarters in the Port Industrial area in 1963. Photograph ordered by Star Iron & Steel. (TNT 7-24-63, A-11, TNT 10-13-63, B-9)

Star Iron & Steel Co. (Tacoma); Steel;

Additional view of Star Iron & Steel Co.'s "Porta Tower" in operation at the Cotten Bros. logging site located in Packwood. These towers could be moved from logging camps to other logging camps with relative ease with transport by heavy-duty trucks. "Porta Towers" were mobile steel spur trees. See A139670-4 for another view of "Porta Tower" in use. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel; Hoisting machinery; Logs;

Porta Tower in operation at the Cotten Bros. logging site in Packwood on October 23, 1963. Used as portable steel spur trees, "Porta Towers" were manufactured by Star Iron & Steel Co. of Tacoma for use in the logging industry. Star Iron & Steel was well known for their cranes and specialized equipment which included hydraulic presses, log barkers, radio and television towers, and chip handling buckets. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel; Hoisting machinery; Logs;

Crane under construction at Star Iron & Steel Co. The Star Iron & Steel plant was located in new quarters at 326 Alexander Ave. in the Port Industrial area. Custom designing and manufacturing special equipment, cranes, and hoists was its primary business. During July, 1964, gantry cranes weighing 50 and 350 tons were being manufactured by Star Iron & Steel. Gantry cranes were similar to overhead bridge cranes except that the bridge for carrying the trolly or trolleys was rigidly supported on two or more legs running on fixed rails or other runway. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hoisting machinery;

Interior of Star Iron & Steel Co. plant on Alexander Ave. in the Port Industrial area. this is a general view of the machine shop area which has over 15,000 square feet of well lighted, heated space. Founded in 1908, Star Iron & Steel was one of the oldest steel fabricating companies in the Pacific Northwest. Cranes, hoists and special machinery were custom designed and manufactured. In July, 1964, Star Iron & Steel were busy constructing 50 and 350 ton gantry cranes. Gantry cranes are similar to overhead cranes with the same strength and durability but are raised above the floor by support legs mounted on the end trucks. There was ample space in the machine shop area also for assembling crane trolleys, hoists, drive trucks and other mechanical equipment. TPL-9626 (SIS booklet, c. 1965)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hoisting machinery;

Fabrication and boring mill at Star Iron & Steel. Two men shown at work at Star Iron & Steel, 326 Alexander Ave. in the Port Industrial area, on August 8, 1966. They may have been working on "B" and "A" cranes. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970; Hoisting machinery;

Conveyor system pictured at Port of Tacoma in January, 1967. Built by Star Iron & Steel of Tacoma, the elevated conveyor equipment is set up to load and unload materials to the domed storage tank in the background. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Conveying systems--Tacoma--1960-1970; Storage tanks--Tacoma;

A small convoy of trucks prepares to leave Star Iron & Steel, 326 Alexander Ave., loaded with manufactured products on March 13, 1968. Star Iron was well known for its crane production and other heavy duty equipment. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Trucks--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970;

On a wet and bleak day in March, 1968, Star Iron & Steel Co. employees tested a new 100-ton gantry crane meant for dam work. The men are dwarfed by the sheer size of the crane located outside of company headquarters at 326 Alexander Ave. in the Tideflats. The heavy crane, standing 64 feet high, actually weighs in at 125 tons. It was built for the Army Corps of Engineers to handle powerhouse intake and spillway gates on the Little Goose Lock & Dam on Snake River. Photograph ordered by Star Iron & Steel Co. (TNT 3-17-68, C-21)

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Steel industry--Tacoma--1960-1970;

Another view of the giant crane shown in D153667, Image 1. Cranes manufactured by Star Iron & Steel underwent rigorous testing before they were released to buyers. The Army Corps of Engineers required that the crane be fully assembled and operable before delivery. Once performance testing was completed, the crane would be dismantled and shipped. This 100-ton crane was destined for work on the Snake River at the Little Goose Lock & Dam. Similar cranes were built by Star Iron & Steel for usage on the Hoover, Mossyrock, Mayfield, Grand Coulee, Shasta and Bonneville dams. Photograph ordered by Star Iron & Steel Co. (TNT 3-17-68, C-21)

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Steel industry--Tacoma--1960-1970;

Star Iron & Steel, general view around shop. On July 18, 1968, Star Iron & Steel was in the process of constructing a 250-ton bridge crane for Kerr Lock & Dam, located in Oklahoma. They had also just landed a 6.4 million dollar contract to build four 100-ton floating cranes for the Navy. Star Iron & Steel was well known for their custom designing and manufacturing of hoists and cranes. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

Close-up of Star Iron & Steel Co. machinery, possibly a shovel, taken on November 15, 1968, at the company plant in Tacoma's Tideflats. Star Iron & Steel was a well-known local manufacturer of hoisting machinery. It had been in Tacoma since 1918 and had moved to its new location in the Port Industrial area in 1963. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970; Hoisting machinery;

Scenes from the steel industry. By 1969, Star Iron & Steel had been in their Port Industrial location for six years. The larger facility at 326 Alexander Ave. made it possible for the company to increase payroll and accept more jobs. One of the projects in February of 1969 was to build winch components for Everett Alumina Crane. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

Scenes from Star Iron & Steel. Star Iron & Steel was one of the northwest's oldest steel fabricating firms. It was well known for the quality of its cranes, especially the heavy duty cranes manufactured for the Navy during WWII. In February of 1969, one of its projects was to manufacture winch components for the Everett Alumina Crane. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

Scenes from the steel industry. Star Iron & Steel Co. of Tacoma was in the process of manufacturing winch components for Everett Alumina Crane in the early part of February, 1969. Work was being done primarily in building 532. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

Scenes from the steel industry. View of crane work at Star Iron & Steel Co. Star Iron & Steel was one of the northwest's oldest fabricating companies. In February of 1969, the company was involved in manufacturing winch components for the Everett Alumina Crane. This crane may have been eventually used by the Port of Everett to move alumina ore, one of the port's chief imports. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;