St. Regis Paper Co. modern logging operations, Kapowsin. Mobile steel spars began to make an impact on St. Regis Paper Co. logging operations in 1966. By the end of 1967, St. Regis was expected to have nine of these self-powered replacements for the wooden spar in operation in Washington State. The portable steel spar pictured above in July, 1966, could be set up far quicker than the old wooden masts. Consequently, preparation time was greatly reduced and logging productivity increased. Diesel engines propelled the spars and drove the winches. Since they are mobile, they could be maneuvered to cover a site from several different positions which permitted shorter drags and more efficient yarding. (St. Regis Midwesterner, May , 1967, p. 3)

St. Regis Paper Co. (Kapowsin); Lumber industry--Kapowsin--1960-1970; Logs;

Kapowsin logging operations. This site was one of St. Regis Paper Co.'s logging operations in July of 1966. The view is very similar to A150113, image 14. The vivid yellow mobile steel spar was portable and could be set up much quicker than the old wooden spars. St. Regis was in the process of changing over to the self-powered steel spars as preparation time was greatly reduced and logging productivity increased. Mobility increased as well which meant shorter drags and more efficient yarding. (scan from original negative, no print on file) (St. Regis Midwesterner, May, 1967, p. 3-article)

St. Regis Paper Co. (Kapowsin); Lumber industry--Kapowsin--1960-1970; Logs; Hoisting machinery;

The mid-60's saw St. Regis Paper Co. complete a number of programs to modernize logging procedures and control the cost of logs. There was a move to convert to highly mobile equipment for yarding and loading logs. The maneuverability of the new loader pictured above in July, 1966, on St. Regis Kapowsin property, increased the efficiency of loading logs onto trucks after yarding. The investment of new types of heavy machinery that were both mobile and able to be set up quickly freed both men and machines for more productive work. The new loaders ran on rubber tires and had special devices for handling log tongs. Their agility allowed the cranes to move about the area quickly to stack logs and do other jobs. (St. Regis Midwestener, May, 1967, p. 3)

St. Regis Paper Co. (Kapowsin); Lumber industry--Kapowsin--1960-1970; Logs; Hoisting machinery;

An employee of St. Regis Paper Co. is shown on January 18, 1967, turning the knobs on a new IBM 360 computer system at the firm's data-processing center. She is using an IBM instructional manual. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Computers; Office workers--Tacoma--1960-1970;

October, 1967, scenes from Potlatch Forests' Lewiston, Idaho, plant. A Potlatch employee grabs ahold of a long plywood board in the Lewiston, Idaho, plant. The edge of the board, as those of others stacked nearby, are marked "pfi" and "quality," "made in the USA." Photograph ordered by Malcolm McGhie, industrial consultant, New York, for the 1967 Potlatch Forests annual report.

Plywood; Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970;

October, 1967, scenes from Potlatch Forest Industries' Lewiston, Idaho, plant. Potlatch workers spread thin sheets of plywood onto an enormous round table. Carts containing more plywood encircle the table. A veneer dryer is situated near the right wall of the plant. Photograph ordered by Malcolm McGhie, industrial consultant, New York, for Potlatch Forest Industries' 1967 annual report.

Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970; Plywood;

October, 1967, scenes from an Idaho mill. A Potlatch Forests, Inc., employee must carefully monitor the controls of the Chip-N-Saw as it processes logs. A Simpson Timber electrician patented the process in the very early '60s using the general concept of turning logs directly into lumber and pulp quality chips without any waste wood or slabs left over. Logs could be fed through in a continuous stream. Photograph ordered by Malcolm McGhie, industrial consultant, New York, for Potlatch Forests' 1967 annual report. (www.forestnet.com/archives/Feb_05/sawmilling1.htm)

Logs; Saws; Machinery; Lumber industry--Idaho--1960-1970; Paper industry--Idaho--1960-1970;

Modular home on display. The "MODS" modular home manufactured by the St. Regis Paper Co. was divided into three sections. Here a crane has carefully lowered one section onto the cement parking lot behind the University of Puget Sound Fieldhouse. One more modular home would be placed on display for thousands of Tacomans to inspect as part of the 24th annual Tacoma Home Show. Photograph ordered by St. Regis Paper Co.

St. Regis Paper Co. (Tacoma)--1970-1980; Prefabricated houses; Hoisting machinery;

Modular home. St. Regis Paper Co. would make their "MODS" modular homes available for touring at the 24th annual Tacoma Home Show held March 31- April 5, 1970. The three sections of the home would be transported to the University of Puget Sound Fieldhouse's parking lot where they would be assembled. The modular home could apparently be assembled in one day, including carpeting. The "MODS" were geared toward people looking for affordable, low-cost housing. St. Regis was a leader in the fast-growing field of modular home construction. Photograph ordered by St. Regis Paper Co. (TNT 3-22-70, D-10--article; TNT 4-1-70, D-16 - article)

St. Regis Paper Co. (Tacoma)--1970-1980; Prefabricated houses; Signs (Notices);

Modular home on the move. "Here come the MODS" warned the sign plastered to a section of modular homes that was being transported to the University of Puget Sound Fieldhouse in mid-March, 1970. The "MODS" would be on display at the 24th annual Tacoma Home Show to be held March 31 - April 5th. The manufacturer was the St. Regis Paper Co., a leader in the Pacific Northwest's fast-growing modular home construction field. Photograph ordered by St. Regis Paper Co. (TNT 3-22-70, D-10--article)

St. Regis Paper Co. (Tacoma)--1970-1980; Prefabricated houses; Trucks--Tacoma--1970-1980;

Modular home units. A Kenworth truck has just pulled up to the University of Puget Sound Fieldhouse on March 18, 1970, and will shortly be unloading one section of a modular home which will be displayed during the annual Tacoma Home Show. The modular homes, called "MODS," were manufactured by St. Regis Paper Co. and aimed toward buyers seeking low-cost homes. They could be assembled in one day at the buyer's lot. View of heavy duty truck with "Caution Wide Load" sign and part of modular home; the university's Baker Stadium is in rear. (TNT 3-22-70, D-10- article)

St. Regis Paper Co. (Tacoma)--1970-1980; Trucks--Tacoma--1970-1980; Prefabricated houses;

A wide-body Kenworth truck carefully emerges from a St. Regis Paper Co.'s facility as it prepares to deliver the "MODS" modular home to the University of Puget Sound Fieldhouse. Once there the modular home sections will be assembled so that Tacoma Home Show attendees could check them over and hopefully be encouraged to buy. St. Regis was a leader in the field of modular home construction and priced their homes low enough for the average worker. Photograph of St. Regis Paper Co. (TNT 3-22-70, D-10 - article)

St. Regis Paper Co. (Tacoma)--1970-1980; Trucks--Tacoma--1970-1980; Prefabricated houses;

Modular home display. This is the assembled modular home, "MODS," with landscaping located at the University of Puget Sound Fieldhouse parking lot in time for the 1970 Tacoma Home Show. For the first time in 24 years, there would be two model homes located in the parking lot; both of them were modular homes manufactured by St. Regis Paper Co. The home was divided into three sections and trucked in to be assembled. St. Regis wanted the buying public to see that low-cost modular homes could be very attractive and affordable. Photograph ordered by St. Regis Paper Co.

St. Regis Paper Co. (Tacoma)--1970-1980; Prefabricated houses;

1973 Richards stock footage. Aerial view in July of 1973 of the St. Regis Paper Co. The Puyallup Waterway is directly behind the plant. Due to St. Regis' vigorous efforts to curtail pollution, there is no sign of the plant's usual massive smoke emissions. TPL-5484

St. Regis Paper Co. (Tacoma)--1970-1980; Aerial views; Puyallup Waterway (Tacoma);

Fischer & Porter Co. West Tacoma Newsprint Co. in Steilacoom, WA. Man taking notes on a clipboard reading various circular gauges attached to large machines.

Person pointing at an electrical box with various gauges at the West Tacoma Newsprint Co. in Steilacoom, WA.

Copy of customer's negatives. This undated photograph was probably taken at St. Regis Paper Co.'s Tacoma offices. Several Japanese businessmen are pictured with two men believed to be St. Regis executives. Japan was a prime market for logs and wood products from the Pacific Northwest. Third man from the left is believed to be Katsumi Yasuda. Photograph ordered by St. Regis Paper Co. on February 8, 1974.

St. Regis Paper Co. (Tacoma); Guests--Tacoma--1970-1980;

Copy of customer's negatives. Undated photograph requested copied by St. Regis Paper Co.on February 8, 1974. Man believed to be a St. Regis executive displays a framed painting while several Japanese visitors stand nearby.

St. Regis Paper Co. (Tacoma); Paintings; Guests--Tacoma--1970-1980;

Riegel Carolina Paper & Pulp Mill looking out on the docks on a ship named Mogul with a striped and lettered G figure.

Fischer & Porter Co. West Tacoma Newsprint Co. in Steilacoom, WA.

Large pipe and smokestack at the Riegel Carolina Paper & Pulp Mill.

Man in a red baseball cap engaging with machinery at the Riegel Carolina Paper & Pulp Mill.

Riegel Carolina Paper & Pulp Mill looking out on the docks on a ship named Mogul with a striped and lettered G figure.

Laborer interacting with machinery at the Fischer & Porter Co. West Tacoma Newsprint Co. in Steilacoom, WA.