Henry Mill, construction of prefabricated trusses. Photograph shows piles of timber and a wood form that is being constructed at the Mill, located at the foot of Starr St., near the water. During the war, Henry Mill was active in lumber prefabrication.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill was located at the foot of No. Starr St., right at the waterfront. It was on the 28 acre site of the old Tacoma MIll Co. During the war, Henry Mill specialized in prefabricated elements for the military. The company was taken over in 1945 by Tacoma Lumber Fabricating Co. The photograph shows lots of stored lumber as well as a couple of cranes.

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Henry Mill and Timber Company. Burner and lumber storage dock along the Tacoma waterfront. Henry Mill began operations at this site in 1925. It was formerly the site of the Old Tacoma Mill Co. TPL-8381

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Henry Mill and Timber Company. Lumber storage dock along the Tacoma waterfront. Began operations at this site in 1925.

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Henry Mill and Timber Company along the Tacoma waterfront. Henry Mill began operations at this site in 1925. Prefabricated trusses can be seen in the foreground. During the World War II, the company specialized in prefabricated bridges and hangars for the military.

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Buffelen Lumber and Manufacturing Company.

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950;

Long shot of Buffelen Lumber and Manufacturing Company, located at Lincoln at Taylor Way on the Tideflats.

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950;

Buffelen Lumber & Manufacturing Co. was located in the area near the intersection of Lincoln and Taylor Way along the Tideflats. The company had been established at this location in the early 1900s. To the left of the picture is the mill's log pool.

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950;

View taken from an elevated point on March 19, 1943 of the Buffelen Lumber & Manufacturing Co., located on Lincoln at Taylor Way on the Tideflats. The company was organized in 1912 by John Buffelen, who produced primarily doors. Early in 1916, the plant began to manufacture fir plywood. In 1928, Buffelen met Phil Simpson, who became vice president of the company. John Buffelen left the firm in 1928 and Simpson acted as general manager of what was known as the Buffelen Lumber & Manufacturing Co. Mr. Simpson was one the forces involved in the formation of the Douglas Fir Plywood Association. ("The Plywood Age" Robert M. Cour)("The Plywood Age" Robert M. Cour)

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950;

The log pool at Buffelen Lumber and Manufacturing Company, located at Lincoln at Taylor Way on the Tideflats. The company had been operating a mill at this location since the early 1900's.

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950;

Logs are stored in a log pond at Buffelen Lumber and Manufacturing Company on the Tideflats.

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Logs;

Buffelen Lumber and Manufacturing Co. was located at Lincoln at Taylor Way on the Tideflats. Its raw materials and finished products were moved by water and rail. This photograph shows the log pool to the right with the tracks for the railroad along side.

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Railroad tracks--Tacoma;

ca. 1943. Built in 1924, the Henry Mill & Timber Company occupied the site on Ruston Way just south of North Starr St. for almost 20 years. Originally a sawmill, they started fabricating structures when they built the caisson panels for the first Narrows Bridge. Their expertise in designing and building prefabricated structures from heavy timber won them contracts during WWII for giant store houses and hangers that could be broken down into small sections, shipped, and re-assembled with a minimum of effort. After the war they were taken over by the Tacoma Lumber Fabricating Co. which closed in the early 1950s.

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Prefabricated buildings--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill miscellaneous shots. The Henry Mill & Timber Company was one of the first lumber companies to prepare for the demand of pre-fabricated lumber products. They later became a pre-fabrication company rather than a lumber mill company. Interior view of construction using Henry Mill & Timber Co. pre-fabricated products.

Lumber industry--Tacoma--1940-1950; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

In 1922 the Henry Mill & Timber Comany bought 26 acres of land where the old Tacoma Mill Company used to stand to build a new company. The Henry Mill & Timber Company began in July 1925. On June 15, 1942 a major fire destroyed most of the plant. Only the planing mill and lumber piles were saved. When this picture was taken in 1944, they were still in the process of re-building. In 1945 the company was bought out by the Tacoma Lumber Fabricating Company.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

Wheeler Osgood Plywood plant, Mr. McCallum. The Wheeler Osgood Plywood Co. began in 1889 as door manufacturers. In 1910 they became one of the first plywood manufacturers in Tacoma. They are one of the largest douglas fir plywood producers in the Northwest. View of Mr. Winston H. McCallum, Douglas Fir Plywood Association at the Wheeler Osgood plywood plant in front of a large cut log.

Plywood; Wheeler, Osgood Co. (Tacoma); Logs; McCallum, Winston H.;

Wheeler Osgood Plywood plant, Mr. McCallum. In 1939 Wheeler Osgood celebrated their 50th anniversary by sending the 27th millionth door they built as part of the Washington State exhibit at the New York World's Fair. View of laborers at the Wheeler Oswood plywood plant. Photo ordered by Mr. Winston H. McCallum of the Douglas Fir Plywood Association.

Plywood; Wheeler, Osgood Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Logs;

Henry Mill barge assembly. Henry Mill & Timber Co. products were used throughout Tacoma for many projects. The company was organized by W. Yale Henry, who also serves as president. View of Henry Mill & Timber Co. plant with lumber being used for a barge.

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma);

Henry Mill shots of hardware and quantity. Henry Mill & Timber Co. was a leader in the pre-fabricated lumber field. Pre-fabricated lumber helped speed the war effort in filling their government orders. Henry Mill also had their products throughout Tacoma housing projects. Exterior view of Henry Mill & Timber Co. plant.

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Prefabricated buildings--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill test assembly of truss. Henry Mill & Timber Co. specialized in pre-fabricated lumber products. They were a leader in the industry and received many government contracts. Exterior view of group examining assembly of truss. TPL-6661

Lumber industry--Tacoma--1940-1950;Trusses--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill showing salt treatment of wood. Henry Mill & Timber Co. was very busy with the construction industry throughout Tacoma. They were leaders in prefabricated materials which were needed for the development of housing and businesses in Pierce County. View of unidentified laborer directing the hoisting of lumber during salt treatment of wood.

Lumber industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Henry Mill & Timber Co. (Tacoma);

Sliced Forest Products, Moore dry kilns and knife. An employee stands by ready to remove a load of lumber from the drying kiln. Lafayette Moore founded the Moore Dry Kiln Co. in 1879 in North Portland, Oregon. The instrument controls the temperature and relative humidity at each end of the kiln independently. This was used in the production of plywood in the Northwest.

Lumber industry--Tacoma--1940-1950;

Sliced Forest Products, Moore dry kilns and knife. A machine used in making plywood and called a knife is in the foreground. A "peeler log" unwinds against a knife in a continuous strip of veneer which is then sent into the big Moore dry kiln where they are steamed and made ready for further processing. The kiln installed at Puget Sound Plywood in the mid-1940's was the only one of its size in the State of Washington.

Plywood; Lumber industry--Tacoma--1940-1950; Sliced Forest Products (Tacoma);

Douglas Fir Plywood. A man is using a forklift to stack loads of plywood in a small area. Douglas Fir is excellent for plywood because of its great strength, elongated trunks free from limbs, knots and other defects. It is durable and resists decay. (T.Times, 2/17/1948)

Lumber industry--Tacoma--1940-1950; Plywood;

Douglas Fir Plywood. A man is using a forklift to stack loads of plywood in a small area in April of 1945. During the 1940's Tacoma led the nation's plywood industry. The city had five factories which turned out more than 12% of all the Douglas Fir plywood produced in the nation. (T.Times, 1/9/1946)

Lumber industry--Tacoma--1940-1950; Plywood;

Clark residence, interior for D.F.P.A. A workman completes sanding the joint between two sheets of plywood on an interior wall. Plywood was used in home construction for its insulative qualities on both ceilings and walls. The Douglas Fir Plywood Association, headquartered in Tacoma, represented the entire fir plywood industry and promoted plywood nationally. (T.Times, 1/9/1946)

Plywood; Douglas Fir Plywood Association (Tacoma);

Kulien & Wollander home in Lakeside project for D.F.P.A. Plywood was used for both interior and exterior residential purposes. It was used for prefabricated housing for war workers. Plywood was known for its strength and flexibility in construction. It was often used for concrete molds. (TNT, 2/1942)

Plywood; Kulien & Wollander Co. (Lakewood); Douglas Fir Plywood Association (Tacoma); Houses--1940-1950;

Kulien & Wollander home in Lakeside project for D.F.P.A. The Douglas Fir Plywood Association provided national promotion of plywood as well as product development and quality control work to assure uniform high quality of the panels from all plywood factories. Plywood was used for both interior and exterior residential purposes. (TNT, 2/1942)

Plywood; Kulien & Wollander Co. (Lakewood); Douglas Fir Plywood Association (Tacoma);

Kulien & Wollander home in Lakeside project for D.F.P.A. The Douglas Fir Plywood Association provided national promotion of plywood as well as product development and quality control work to assure uniform high quality of the panels from all plywood factories. Plywood was used for both interior and exterior residential purposes. (TNT, 2/1942)

Plywood; Kulien & Wollander Co. (Lakewood); Douglas Fir Plywood Association (Tacoma);

Timber Fabrication Co. was building prefabricated materials for mass productions of commercial and residential structures. Pre-fabrication had advantages, it offered overall savings on materials and rapid production of structures. View of building progress on building by Timber Fabrication Co. with consulting engineers, William D, Smith and Clyde E. Murray.

Lumber industry--Tacoma--1940-1950; Prefabricated buildings--Tacoma; Progress photographs; Timber Fabrication Co. (Tacoma);