ca. 1959. Exposure of Reichhold Chemical. Reichhold occupied 51 acres on the Tideflats and manufactured chemicals used by the plywood industry. The plant opened in 1956.

Reichhold Chemicals, Inc. (Tacoma); Chemical industry--Tacoma--1950-1960;

ca. 1959. Harmon Manufacturing Co. of Tacoma, in business here since 1909, built classroom furniture as well as that for the home. The company was located at 1938 Pacific Ave.This studio setup is of portable lab equipment, the answer for a school that is pressed for space. The teacher model illustrates chemical formulas on a rolling blackboard, while she rests a glass of soda on the ledge at the top. The blackboard also appears to slide open, to access storage space inside. Beside her is a portable lab table with a faucet and small sink and bunsen burner on top. There is plenty of storage space inside the cabinet for chemicals.

Furniture industry--Tacoma; F.S. Harmon Manufacturing Co. (Tacoma); Cabinets (Case furniture);

ca. 1959. The St. Regis Paper Co. kraft pulp and paper mill and multiwall bag plant at Tacoma, Washington. The plant was a major producing unit serving the western states. Late in 1959, construction was started to expand the pulp mill and install a second machine which would produce kraft paper and board, more than doubling the output of the mill. The new kraft paper and paper board machine was 130 feet wide and 630 feet long. It would require 150 additional employees at a payroll of 3/4 million dollars. Additions were being made to the steam and recovery plants, pulp mill (left) and to the paper mill (right.) (St. Regis Paper Co. Annual Report- 1959; TNT 11/5/1959, pg. 1)

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

ca. 1959. Cement bags being produced in St. Regis's multi-wall bag plant in Tacoma. The bags are for Dacotah Portland Cement, produced by the South Dakota Cement plant in Rapid City, SD.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

A Veneer Chip Transport Kenworth truck and trailer, indicating capacity weight of under 36,000, is parked outside the St. Regis plant on Portland Avenue on April 11, 1960. The photograph would be used for advertising. Photograph ordered by Kenworth Motor Truck Co., Seattle.

Trucks--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970;

The Brynn Foss tug gently guides the MSC-290 minesweeper, Gannet II, after its launching on May 26, 1960, at Tacoma Boat Building. It would be commissioned in the Puget Sound Naval Shipyard a year later, on July 11, 1961, and eventually be sent to monitor the waters of Japan and Vietnam. The MSC-290 was the sixth of seven coastal mindsweepers built by Tacoma Boat Building under contract with the Navy. It was christened by Mrs. F.P. Luongo. (TNT 5-27-60, p. 3)

Launchings--Tacoma--1960-1970; Boat & ship industry--Tacoma--1960-1970; Tugboats--Tacoma--1960-1970; Tacoma Boat Building Co., Inc. (Tacoma);

St. Regis timber operations in Mineral forest stand, August 2, 1960. Clear cutting is evident in this section of Mineral forest owned by the St. Regis Paper Co. Stumps and pieces of fallen timber are scattered amidst the knee-length grass. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Tree stumps; Clearing of land; Trees; St. Regis Paper Co. (Mineral);

Two men and their sedan are dwarfed by the towering timber in forests near Mineral on August 2, 1960. They were there to observe timber and logging operations of the St. Regis Paper Co. St. Regis had plants in both the United States and Canada, including a longtime location in Tacoma. This is a typical stand of old growth, mostly Douglas fir, which supplied the company's pulp and paper mill, sawmill and plywood plant operations in Tacoma. The Richards photograph above was used in St. Regis' 1960 annual report. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (1960 Annual Report, p. 2)

Trees; Lumber industry--Tacoma--1960-1970; St. Regis Paper Co. (Mineral);

August, 1960, progress photographs of St. Regis Paper Co. mill ordered by Malcolm McGhie, industrial consultant, New York. View of portion of St. Regis Paper Co. plant in the Tideflats including stacks of logs piled adjacent to railroad tracks. Cylinder-shaped structure is probably the new continuous digester which was expected to increase capacity by 325 tons per day. The tower is 110 feet high. Capital expenditures for 1960 & 1961 included $20,893,881 for the Kraft mill expansion of St. Regis' Tacoma plant. This amount, by far, was the highest budgeted for those years and accounted for over one-third of the money planned for new construction and plant improvement. The addition to the Tacoma mill was made to permit St. Regis to furnish a larger part of the needs of the company's own box plants and bag factories in the western and midwest states. (1960 Annual report, p. 3, 6, TNT 11-13-60, A-18)

St. Regis Paper Co. (Tacoma)--1960-1970; Progress photographs; Logs; Machinery;

Progress photographs of St. Regis Paper Co. expansion taken on August 11, 1960, on behalf of Malcolm McGhie, industrial consultant, New York. Long general view of machine room taken from balcony on north end. The machine room was enlarged at the Kraft paper and board mill located in the Tideflats during a twenty million dollar expansion scheduled for 1960-61. A new paper machine would be added by year's end which would increase and diversify the Tacoma mill's paper and board capacity. (1960 Annual Report, p. 6, 7)

St. Regis Paper Co. (Tacoma)--1960-1970; Progress photographs; Machinery;

View of enlarged machine room in the St. Regis Paper Co.'s kraft paper and board mill on November 28, 1960. This progress photograph was taken on behalf of Malcolm McGhie, industrial consultant from New York City, for possible use in St. Regis' 1960 Annual report. A new paper machine was being erected in 1960 which would increase and diversify Tacoma's paper and board capacity. (St. Regis 1960 Annual Report, p. 7)

St. Regis Paper Co. (Tacoma)--1960-1970; Progress photographs; Machinery;

ca. 1960. Man stares at log probably retrieved from log pond below in this ca. 1960 photograph. The outer bark appears to have been shredded in spots. Another man is maneuvering a log in the pond with a long pole.

Logs; Lumber industry--1960-1970;

ca. 1960. Aerial photograph of the Pennsylvania Salt Manufacturing Co. in 1960 Richards Studio's stock footage. This Tacoma plant, opened in 1929, covered nearly 40 acres of tideflats on the Hylebos Waterway. A ship is docked ready to transport Pennsalt's chemical products. TPL-6578

Pennsylvania Salt Manufacturing Co. of Washington (Tacoma); Chemical industry--Tacoma--1960-1970; Aerial photographs;

ca. 1960. Pennsylvania Salt Manufacturing Co.'s 40-acre plant faced the Hylebos Waterway and portions of undeveloped Northeast Tacoma, including an enormous gravel pit. Aerial photographs taken by the Richards Studio in 1960 show the large facility along with numerous storage tanks. A ship is docked ready to be loaded with the company's chemical products.

Pennsylvania Salt Manufacturing Co. of Washington (Tacoma); Chemical industry--Tacoma--1960-1970; Aerial photographs;

A 12' log rests on the floor of Puget Sound Plywood Corporation's plant in December, 1960, as a much smaller log, with the help of chains and a winch, is being deposited behind it. An employee of the cooperative plywood company carefully maneuvers the log into position. Markings on the gigantic log indicate that the volume of the log is 2000 board feet. Photograph ordered by Douglas Fir Plywood Association.

Logs; Puget Sound Plywood, Inc. (Tacoma); Lumber industry--Tacoma--1960-1970; Cooperatives--Tacoma;

Boatbuilder attaching wooden ribs to keel. This is possibly Tacoma Boat Building. Photograph ordered by West Coast Lumber Association. TPL-5546.

Boat & ship industry--Tacoma--1960-1970; Boats--Tacoma--1960-1970;

Progress March 3, 1961, photograph of a lone worker who appears to be sanding down the ribs that will be connected to the rest of a boat. This may be at Tacoma Boat. Photograph ordered by West Coast Lumber Association. TPL-9393

Boat & ship industry--Tacoma--1960-1970; Boats--Tacoma--1960-1970;

Boat under construction. Progress photographs of a fishing boat under construction were taken on March 3, 1961, at Martinac Shipbuilding on behalf of West Coast Lumber Association. TPL-9121

Boat & ship industry--Tacoma--1960-1970; Boats--Tacoma--1960-1970;

Martinac Shipbuilding launching of #133, the Royal Pacific, occurred on May 16, 1961. View of boat; another boat, possibly a tug, the Edward A. Young, is to the left. The $600,000 Royal Pacific was the first tuna clipper to be built in Tacoma in ten years. It was also the first tuna clipper to be built from the keel up as a seine-type tuna vessel. The 142' vessel had a capacity of 425 tons of tuna under refrigeration. It was powered by a 1600-horsepower opposing piston engine. The crew of 13 would be skippered by Lou Brito, who would be transferring from Martinac-owned Southern Pacific tuna vessel. (TNT 5-17-61, A-5) TPL-9056

Boat & ship industry--Tacoma--1960-1970; Fishing boats--Tacoma; J.M. Martinac Shipbuilding Corp. (Tacoma); Launchings--Tacoma--1960-1970;

Chip feeding operation at St. Regis Paper Co. 's Tacoma plant. Mounds of wood chips blanket the area. St. Regis allowed storage of pulp-mill chips outside its kraft mill location. Sulphate pulp is one of the products made from chips made out of waste wood. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

View of outdoor chip feeding section of St. Regis Paper Co. plant in Tacoma, May, 1961. The low covered structure may have housed wood chips. Machinery in background was probably used to transport the chips. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

Chip feeder in operation at St. Regis Paper Co. May, 1961, photograph of one of the chip feeders on wheels employed at the St. Regis Paper Co. plant in Tacoma. Pounds of wood chips accumulate on wooden shelf. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

July, 1961, saw the installation of a Fibre Making Processes, Inc., barking drum at the Tacoma St. Regis Paper Co. plant. The 12' x 67.5' drum tumbles logs or billets by mechanical rotation which strips the bark using abrasive action. Photograph ordered by Fibre Making Processes, Inc., Chicago, IL.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

View of bark conveyer at St. Regis' Tacoma plant. One small log is resting on side of conveyer belt. Fibre Making Processes, Inc., had its 12 foot barking drum installed in early July, 1961. Photograph ordered by Fibre Making Processes, Inc., Chicago.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

The discharge end of a new Fibre Making Processes, Inc., barking drum with view of discharge gate and cut small logs; barking drum located at St. Regis Paper Co.'s Tacoma plant. The bark would be removed by abrasive action of the rotating mechanical drum. Photograph ordered by Fibre Making Processes, Inc., Chicago.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

Rayonier logging operations at Sappho in July, 1961. Logs are being lowered by cable (wire rope) under the supervision of Rayonier employees. Photograph ordered by Bethlehem Pacific Coast Steel, Seattle.

Logs; Lumber industry--Sappho;

Logs are being lowered via wire rope at Rayonier logging operations in Sappho in July, 1961. Steel lines are attached to the spar. Photograph ordered by Bethlehem Pacific Coast Steel Corp., Seattle.

Logs; Lumber industry--Sappho;

A Towmotor forklift operator keeps his eye on the plywood pallet on which several large bags of Mariposa brand products are being transported in this August 9, 1961, photograph. This portion of the General Mills warehouse appears loaded with bags of White Rose and other brands of flour. Photograph ordered by Cole & Weber.

Industrial facilities--Tacoma; Hoisting machinery; Flour & meal industry--Tacoma;

The Samuel M. Langston Co. of Camden, N.J., made equipment for the corrugated container industry for over 100 years. View of Langston machinery at the St. Regis Paper Co. plant in September, 1961; machines may include the counter roll rewinder and/or shaftless rewind stand. Large roll of kraft paper on Langston machine. Northern Pacific boxcars conveniently located in rear of picture. Photograph ordered by the Samuel M. Langston Co.

Machinery; Paper industry--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970; Railroad freight cars--Tacoma;

St. Regis Paper Co. employee leans over a Langston machine on September 29, 1961. Man appears to be working with small roll of kraft paper. The Samuel M. Langston Co. made machines, basically rewinders, for the corrugated container industry. Based in Camden, N.J., they were in operations for more than one hundred years. Photograph ordered by the Samuel Langston Co.

Machinery; Paper industry--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970;