Exterior shot of new Recovery Building at St. Regis Paper Company. This new building housed the six story high combustion furnace and the Koppers electric precipitator. The precipitator collected odor bearing particles before they could escape the chimney into the open air. This was part of the company's program to reduce odor caused by the chemical processes of producing pulp. (TNT 2-17-1952, pg. C-14)
St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;
Construction continues on new buildings at the St. Regis Paper Company on Portland Avenue. Still in its early stages in August, 1951, the new buildings have been mapped out with low walls but as the mounds of dirt indicate, no flooring is in place. St. Regis was nearing completion of its eight year expansion plan; this structure is probably the multiwall bag plant which was completed in 1952. Anticipated to add an additional 400 workers to the St. Regis payroll, the new plant, constructed of steel and concrete, would be used for the production of industrial-use bags for cement, fertilizer, and other heavy-duty items. Hooker Electrochemical's tank cars can be seen in the background close to the St. Regis water tower.
Progress photographs; St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Factories--Tacoma--1950-1960;
Stand-by crane at St. Regis. This crane, manufactured by Ederer Engineering in Seattle, is able to move loads up and down nearly two stories inside this tall building along a horizontal trolly near the roof line of the building.
Paper industry--Tacoma--1950-1960; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960;
Progress photograph of steelwork at St. Regis Paper Company. The new multiwall bag plant, adjoining the paper mill, was to replace a leased plant at Seattle. The plant was expected to be in operation before April 1, 1952. It would employ approximately 400 people, including a large percentage of women. (St. Regis Annual Report 1951)
Paper industry--Tacoma--1950-1960; Progress photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960; Building construction--Tacoma--1950-1960;
Dexter's Machine at St. Regis Paper Company. During 1950 the pulp mill at Tacoma was expanded. St. Regis made kraft paper at six mills with a combined capacity of approximately 360,000 tons a year. Ordered by Bird Machine Company, South Walpole, Massachusetts, Mr. V. Fahlgren.
Paper industry--Tacoma--1950-1960; Machinery; Industrial facilities--Tacoma--1950-1960; St. Regis Paper Co. (Tacoma)--1950-1960;
One of the employees at St. Regis Paper Company records information from a printout at one of the machines in the plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.
St. Regis Paper Co. (Tacoma)--People; Paper industry--Tacoma--1940-1950;
An employee at St. Regis watches to be sure all goes well in the wet pulp to paper process in the new kraft paper plant. Ordered by McGraw Hill Publishing Co., Inc., New York, NY.
St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;
Chip feeder at St. Regis plant, Link Belt Company, Mr. R.W. Johnson. Bark was first removed from logs and moved to the woodroom. From the woodroom chunks of wood were moved to wood chippers where they were broken into fine chips. These went into a hopper in the top of a digester where the chips were broken down by chemicals and the resulting pulp was washed and bleached. This large, funnel-shaped machine handled the fine chipping and delivery to the digester.
St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;
The completion of the kraft paper mill in Tacoma, allowed St. Regis a considerable increase in the paper production industry. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; logs have been loaded onto the train cars, and will be transported out of Mineral Forest. TPL-5680
Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Railroad cars--Mineral; Railroad tracks--Mineral; Railroads--Mineral; St. Regis Paper Co. (Mineral);
Mineral, Washington is located fourteen miles north of Morton in north central Lewis County. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; railroad cars are hauling the logs out of the Mineral Forest. TPL-5678
Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; Railroad tracks--Mineral; Railroads--Mineral; St. Regis Paper Co. (Mineral);
St. Regis was established in Tacoma in 1928, the New York firm purchased the industrial site, modernized it and began operations in 1936. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; high line yarder is moving the logs and safely loading them onto trucks.
Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);
St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; giant firs have been cut and will be used at the St. Regis paper mill located in Tacoma.
Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);
St. Regis paper plant in Tacoma is the focal point of the company's expanding pulp, paper and multiwall bag operations in the West Coast. The paper mill was recently completed and is one of the largest and most modern plants in the United States. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; view of high line yarder, with logs ready to be loaded onto cars. TPL-5682
Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);
Tacoma's St. Regis' paper plant is said to be the most modern pulp mill ever built. The Tacoma facilities are spread out over 65 acres, located between the Puyallup River Waterway and the St. Paul and Tacoma Lumber Company. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington.
Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);
St. Regis' expansion project started after World War II ended in 1945, the company was able to begin paper production in Tacoma in January 1949. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; unidentified laborer is surrounded by huge firs.
Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);
St. Regis had been expanding their facilities for many years, the company had added new buildings and had recently begun the mass production of paper in Tacoma. St. Regis began producing paper in January 1949; the paper mill was converting the liquid pulp into heavy multiwall Kraft paper, using the most modern equipment available. Interior view of plant and new roll grinding machine.
Paper industry--Tacoma--1940-1950; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;
Left end of bridge and trolley, Harry S. Pearson and R.E. Morgan. Large rolls of paper are lying on the floor of a storage room while a man moves one of the rolls using a hoist maneuvered from a control booth near the ceiling.
Paper--Tacoma--1940-1950; Paper industry--Tacoma--1940-1950; Hoisting machinery;
St. Regis paper plant in Tacoma is the focal point of the company's expanding pulp, paper and multiwall bag operations in the West Coast. The paper mill was recently completed and is one of the largest and most modern plants in the United States. The new paper producing mill is now able to mass produce paper and offer their customers their quality product in higher volumes and lower prices. Workmen are using an "Ederer" crane to move an enormous roll of paper.
Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);
St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. Tacoma's St.Regis plant would have their own research laboratory within the industrial site. Interior view of plant, paper roll is being moved by a large "Ederer" crane.
Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);
St. Regis Paper Company dominated the Tacoma Tideflats with their ever expanding facilities at the terminus of the Puyallup Waterway. Taken from the top of the water tank. Ordered by St. Regis Paper Co., Mr. J.H. McCarthy.
St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950;
