Publicity shots at Permanente Metals, Bill Gorman. One of Permanente's employees sits at his desk checking lists of figures and order forms. A map of the United States hangs on the wall behind him. Clip boards of additional data also hang on the wall along with schedules. A telephone sits to his right on the desk. The man is wearing a sports jacket, a sweater vest and a tie. He also wears a large ring on his left hand. A pencil protrudes from his jacket pocket. TPL-4555

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Employees--Tacoma--1940-1950; Paperwork; Maps; Telephones;

Publicity shots at Permanente Metals, Bill Gorman. A view of one of the switchboard operators at the Permanente plant in Tacoma and the switchboard panel. She is wearing a headset to enable her to use both hands when operating the cords on the switchboard. A telephone dial is seen beyond her right arm and other office machinery is in the background. The young woman is wearing a two piece suit, a white blouse and a plaid scarf. Permanente acknowledged the high value of each employee in their annual reports. TPL-4555

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Telephone switchboards--Tacoma--1940-1950; Telephone operators--Tacoma--1940-1950; Women--Tacoma--1940-1950;

Permanente Metals began production at their newly equipped aluminun plant on Taylor Way in Tacoma on October 31, 1947. Permanente purchased the former Olin Corp. facility, built in 1942, from the federal government and spent two years modernizing the plant. The remodeled Tacoma plant was the first in the nation to have self cleaning reduction pots with scrubbing systems, minimizing pollution released into the environment (PMC Annual Report, 1947-1948).

Aluminum industry--Tacoma--1940-1950; Aluminum; Industrial facilities--Tacoma; Laborers--Tacoma; Permanente Metals Corp. (Tacoma)--Employees;

Charles P. Love, General Superintendent of Permanente Metals, along with plant technicians activated the first pot line in Tacoma, making October 31, 1947 the first official day of operations. Other pot lines will be activated, once the plant can make certain everything is operating without problems. The plant is expected to be producing at full capacity by the end of November. View of plant technician checking dials and control system (T. Times, 10/31/47, p. 1).

Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Control rooms--Tacoma; Permanente Metals Corp. (Tacoma)--Employees;

Permanente Metals of Tacoma was setting up a new metallurgical research lab, it was expected to be in full operation this fall. The Tacoma plant was one of the newest and most modern aluminum reduction plants in the country. The research facilities would serve the Tacoma and Spokane plants and would focus on aluminum reduction questions and research. Exterior view of Permanente Metals Corporation industrial plant (T. Times, 8/23/48, p. 5).

Industrial facilities--Tacoma; Research facilities--Tacoma; Railroad freight cars--Tacoma; Aluminum industry--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma);

Publicity for Permanente News and Times Industrial Page, Permanente Metals, Bill Gorman. Travis Crowe, one of the storeroom attendants at Permanente Metals Corporation, readies a set of nuts and bolts for use on the aluminum furnaces at the Kaiser aluminum plant on the tideflats. A wall of bins holds all sized nuts and bolts in the storeroom. (T.Times, 2/25/1949, p.49)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Crowe, Travis; Laborers--Tacoma--1940-1950; Bolts & nuts; Workshops--Tacoma--1940-1950;

Crust breaking machine at Permanente, Bill Gorman. A specialized machine has been manufactured to perform the work that had previously been done manually. A crust would form at the openings to the reduction pots where alumina was melted into raw pig aluminum. The plant had two potlines containing 240 reduction pots producing 41 million pounds of alumium per year. (Permanente Metals Corp. 1947-1948 Annual Report)

Permanente Metals Corp. (Tacoma); Aluminum industry--Tacoma--1940-1950; Machinery;

Interior of new aluminum rod mill at Kaiser Aluminum, 3400 Taylor Way, on November 1, 1968. This view is of one-half of Potline #4 and a cart loaded with "channels" which were lowered by crane into a slot just inside the ore hoppers visible on top of each "pot" or reduction cell. The new rod mill was nearly completed and ready for operation.The first rod would be formed in a test run on December 12, 1968. Molten aluminum would be processed into 3/8-inch rods at Tacoma's local mill and then shipped to San Leandro, California, for drawing into electrical wiring. Kaiser had reopened its Tacoma facilities in 1964 after a six-year closure and had steadily expanded since then. It was to permanently close in 2002. Photograph ordered by Kaiser Engineers. (TNT 12-13-68, C-18) (Additional information provided by a reader)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

Kaiser Aluminum; exterior of new pot room building. This reduction plant will become the newest facility to receive power when the the switches are thrown to 18 new "super size pots" or electrolytic reduction cells. Power will be supplied by the Bonneville Power Administration on an interruptible basis. The 18 extra "pots" will boost the plant's production by 10 million pounds annually. (TNT 4/16/1956, pg. 21)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Kaiser Aluminum; new pot room building. Checking cathode bus, arc building. The new building contained 18 new "super size" reduction pots or electrolytic cells. These cells would boost the plant's annual production by more than 10 million pounds and increase payroll by more than $100,000. This addition will bring the corporate primary aluminum capacity in the Northwest to 429 million pounds annually. As the 5th largest employer in the state, Kaiser paid more than 31 1/2 million dollars in wages in 1955 at their Spokane and Tacoma plants. (TNT 4/16/1956, pg. 21)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Kaiser Aluminum; new pot room building. Dumping anode paste, arc building. Kaiser's newest facility contained 18 large "pots" or electrolytic cells, which would add 10 million pounds annually to plant production. Power would be supplied to the cells by the Bonneville Power Administration on a interruptible basis. (TNT 4/16/1956, pg. 21)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

ca. 1956. In 1956, an employee at Tacoma's Kaiser Aluminum & Chemical Corp. plant used an overhead crane to hold a crucible of molten aluminum and pour the liquid metal into a casting mold. The Tacoma plant was originally built in 1942 for the Olin Corporation. Kaiser took over the plant in 1946 and spent over $3 million to expand and modernize the facility in 1952. It was an aluminum reduction facility. It produced pig aluminum from treated ore. The pigs weighed either 50 or 1,000 pounds. Most were sent by rail to Kaiser's Rolling mill at Trentwood, near Spokane, where they were converted into sheets and products. Some went directly to the more than 500 independent aluminum fabricators in the Pacific Northwest, who consumed the pigs directly in the operation of their own remelt and rolling mills. Kaiser closed their Tacoma plant on the tideflats in 2000. (Kaiser Aluminum News, August 1956)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Permanente. The white, powdery alumina was discharged from bins into electrolytic cells known as reduction pots where it was periodically stirred. After heating in the reduction pots the molten aluminum was siphoned from the pots into 1 1/2 ton ladles. The ladles would be transferred by crane to the end of the potroom buildings where the molten metal was poured into molds forming pigs weighing 50 to 1,000 pounds. (Permanente Metals Corporation 1947-1948 Annual Report) TPL-4541

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Aluminum; Laborers--Tacoma--1940-1950; Founding--Tacoma--1940-1950; Foundries--Tacoma--1940-1950;

Permanente. An employee of Permanente at the Tacoma plant looks very grateful for the medical assistance received from a nurse in the medical unit. He is now wearing a large, gauze bandage on his thumb. In 1947-1948 Permanente reported having nearly 5,000 employees in their several locations in Baton Rouge, Louisiana; Owens Lake, Natividad, Oakland, and Moss Landing, California; and Mead, Trentwood and Tacoma, Washington. (Permanente Metals Corporation Annual Report 1947-1948)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Infirmaries--Tacoma--1940-1950; Nurses--Tacoma--1940-1950; Wounds & injuries--Tacoma; Accidents--Tacoma;

The Pacific Northwest offered Permanente Metals, the producers of Kaiser aluminum, inexpensive hydro-electric power. In order to produce one pound of aluminum approximately 10 kilowatts of electricity is needed, therefore the Northwest is the ideal location for the Tacoma and Mead, near Spokane, plants. Interior view of the pot room, the white powdery substance is alumina, which is discharged into the reduction pots, the molten aluminum is siphoned from the pots into one and a half ton ladles (PMC Annual Report, 1947-1948).

Aluminum industry--Tacoma--1940-1950; Aluminum; Industrial facilities--Tacoma; Laborers--Tacoma; Permanente Metals Corp. (Tacoma)--Employees;

Permanente Metals took over the Olin Aluminum facilities, that had shut down in November 1945, these facilities had not been in use until now. Kaiser bought the plant from the United States War Assets Administration, they then invested over one million dollars to modernize the plant. The Tacoma plant featured many self cleaning machines and a knowledgeable staff (T. Times, 10/31/47, p. 1).

Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Control rooms--Tacoma; Permanente Metals Corp. (Tacoma)--Employees;

View of new pot line at the Tacoma reduction plant of the Permanente Metals Corp. It is the first reduction plant in the world to be thoroughly equipped with a scrubber system. This equipment is able to automatically wash away the fumes that are given off in the reduction process. The system consists of individual collectors connected to each pot and several washing stations. Permanente staff can be seen in the center area of the reduction plant.

Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Equipment; Machinery; Control rooms--Tacoma; Permanente Metals Corp. (Tacoma);

Publicity shots at Permanente Metals, Bill Gorman. Two workmen from the Permanente plant shake hands. One of the men is older, wearing coveralls, a stripped shirt and a hat. The other man is younger wearing a plaid shirt, work pants and a hat. They look at each other and smile. It looks like they already like each other and will work well together. The plant facilities are seen in the background. TPL-4555

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Employees--Tacoma--1940-1950;

There's nothing wrong with this chest, it's been x-rayed says Dave Schrader to Bill Courtney, employees at Permanente Metals Corp. As part of a U.S. Public Health Service campaign, all the employees at the Kaiser Aluminum plant in Tacoma received chest x-rays in 1949. In February of 1949, Permanente employed over 3,600 men in their three Washington plants with a combined payroll exceeding $12 million. (Publicity for Permanente News, and Times Industrial Page, Permanente Metals, Bill Gorman) (T.Times, 2/25/1949, p.37) TPL-3686

Permanente Metals Corp. (Tacoma)--Employees; Schrader, David A.; Courtney, William E.; Radiography; Health care--Tacoma--1940-1950;

Crust breaking machine at Permanente, Bill Gorman. Workmen are using a new machine to break the crust that developed on the molten aluminum in the reduction pots at the Permanente aluminum plant. This had been a manual process before development of the specialized machine.

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Machinery;

Permanente's First Anniversary, Permanente Metals, Bill Gorman. A family enjoys hot dogs during the celebration at Permanente on October 27, 1948. The older girl sits on a stack of aluminum pigs that have been produced at the plant. The woman holds a baby with one arm and her hot dog in her other hand. The weiners for the event were fried on one of the hot 500 pound pigs of aluminum at the plant. (T.Times, 10/28/1948, p.1)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Families--Tacoma--1940-1950; Frankfurters--Tacoma--1940-1950;

Interior at plant, Permanente Metals, Ted Schmidt. Interior view of the pot room, laborers are pouring the molten aluminum into a mold to form pigs. Pigs will weigh between fifty and one thousand pounds. The pigs are cooled, stacked on pallets and transported to the rolling mill at Trentwood, located near Spokane, Washington. The pigs from the Mead and Tacoma plant are later re-melted in furnaces where other metallic elements are added to form standard alloys (PMC Annual Report, 1947-1948).

Aluminum industry--Tacoma--1940-1950; Aluminum; Industrial facilities--Tacoma; Laborers--Tacoma; Permanente Metals Corp. (Tacoma)--Employees;

Leo Olsen lost the use of his legs to infantile paralysis when he was 9 years old, but he was determined to be part of WWII. Although a tailor by trade, and a pianist, he found work at the Olin Coporation aluminum plant, on the tide flats, running one of the giant cranes that towered over the electric furnaces. This photograph of Mr. Olsen at the controls of his crane was taken in June of 1944 for the Tacoma Chamber of Commerce. (T. Times, 6/27/44, p. 2). Tacoma Chamber of Commerce Manpower publicity at Olin Corp.

Aluminum industry--Tacoma--1940-1950; Handicapped persons--Tacoma; Olin Industries, Inc. (Tacoma); Olsen, Leo;

Kaiser Aluminum & Chemical Corp. At Kaiser's Tacoma reduction plant, ore is carefully analyzed. Dick Hildebrandt, plant chemist, performs an analysis of petroleum pitch, used in the production of carbon anodes for the electrolytic aluminum reduction process. One of the plant's largest regional purchases in 1954 was $214,000 worth of petroleum pitch. (TNT 5/16/1955, pg. 11)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960; Hildebrandt, Dick;

Kaiser Aluminum; Arc building, looking southeast. The Kaiser Aluminum plant was located about 5 miles north of downtown Tacoma. It had been obtained in 1947 by the huge Kaiser business conglomerate built by Henry J. Kaiser. It was purchased from the Defense Plant Corporation. Kaiser modernized the closed plant and began a series of expansions. In 1956, a $2,000,000 expansion was complete with the creation of 18 new "super size" reduction cells. The improvement also included the erection of a mill-type building to house the 420 ft. potline, office and laboratory buildings, an added electric substation and installation of aluminum bus bars and auxiliary electrical equipment. (Kaiser Aluminum News, August 1956)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Kaiser Aluminum; new pot room; Interior view, Arc building. A man drives a modernistic piece of equipment, a mechanical arm with a tractor base. This new 420 foot potline at the Tacoma plant has 18 "super-size" reduction cells, increasing primary aluminum production by 15%. The Tacoma plant is a reduction plant, it uses power from hydro electric sources to reduce alumina to aluminum. In 1947, Kaiser bought the Tacoma plant from the Defense Plant Corporation which had operated it as a war emergency plant and closed it after VJ day. Its proximity to plentiful electric power, supplied by the Bonneville Power Administration, made it the perfect location for creating aluminum "pigs" by electrolysis. The plant on the Tideflats ran on a 24 hour, around the clock basis. (Kaiser Aluminum News, August 1956)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

ca. 1956. Kaiser Aluminum plant. Molten metal is being poured from a vat into a mold to form "pigs." The Tacoma plant was an aluminum reduction facility. It produced the pig aluminum from treated ore. Each "pig" weighs 50 pounds and contains higher that 99% pure aluminum. The Bonneville Power Administration provided the abundant power needed to produce the metal by electrolysis. (Kaiser Aluminum News, August 1956)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

ca. 1956. Kaiser Aluminum plant. The new 420 foot potline at the Tacoma reduction plant; the result of a $2,000,000 expansion. The line contains 18 new "super size" reduction cells that will increase aluminum production by 15%. The Bonneville Power Administration will provide the power to reduce the ore to pure metal by electrolysis. Dissolved in solution in long lines of reduction cells ("pots",) alumina ore is subjected to electrical current. The chemicals recombine, the aluminum separates from the oxygen and settles as pure metal, aluminum. (Kaiser Aluminum News, August 1956)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Kaiser Aluminum, Tacoma Works rectifier station addition. Exterior of building with train tracks beside it. The Kaiser plants were taken over from the federal government in 1947 by Henry J. Kaiser. The plant in Tacoma was an aluminum reduction plant; it produced pig aluminum from treated ore and then sent it to a fabricating plant to be made into a finished product. The plant underwent a expansion and modernization program in 1952, at a cost of $2,850,000, to increase capacity by 1/3, an annual production of 66, 400,000 pounds.

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Kaiser Aluminum's Tacoma plant near the southeasterly edge of Tacoma's tideflats was expanded at a cost of $2,850,000 in 1952, increasing by one third the plant's aluminum output. November 1952 marked the fifth anniversary of the operation of the Tacoma plant. Four alumina storage towers are seen in front of the plant facilities. Mount Rainier is seen rising majestically over the Tacoma tideflats. (TNT Supplement, 11/2/1952, p.3) TPL-9617

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;