Showing 2783 results

Collections
Richards Studio Photographs Industries Image With digital objects
Print preview View:

D23185-3

St. Paul & Tacoma Lumber Company. Several railroad cars loaded with logs are standing in the yard at the St. Paul & Tacoma Lumber Company. Large off-highway trucks, too large for state highways, brought logs down from forests to reload centers where logs were shipped to mills by railroad cars or on smaller trucks. This site of St. Paul & Tacoma Lumber was used as a large pulp mill.


Lumber industry--Tacoma--1940-1950; St. Paul & Tacoma Lumber Co. (Tacoma);

D23185-5

St. Paul & Tacoma Lumber Company. Several railroad cars loaded with logs are standing in the yard at the St. Paul & Tacoma Lumber Company. The railroad tracks run from further inland directly to and through the plant.


Lumber industry--Tacoma--1940-1950; St. Paul & Tacoma Lumber Co. (Tacoma);

D19585-2

Launching of "Hustler." The young sponsor of the new fishing boat stands at the prow of the ship holding a bouquet of roses in June of 1945. U.S. flags drape the upper and lower decks. The 61.9-foot vessel was built by Western Boat Building. After completion, the trawler was destined for Ketchikan, Alaska.


Launchings--Tacoma--1940-1950; Fishing boats--Tacoma--1940-1950; Boat & ship industry--Tacoma--1940-1950; Western Boat Building Co. (Tacoma); Flags--United States;

D19605-1

Clark residence, interior for D.F.P.A. A workman completes sanding the joint between two sheets of plywood on an interior wall. Plywood was used in home construction for its insulative qualities on both ceilings and walls. The Douglas Fir Plywood Association, headquartered in Tacoma, represented the entire fir plywood industry and promoted plywood nationally. (T.Times, 1/9/1946)


Plywood; Douglas Fir Plywood Association (Tacoma);

A19395-3

General Mills plant. Exterior view of the hay, grain, feed and seed retail business outlet for General Mills. Trucks and an automobile are parked along side. TPL-6518


Agricultural industries--Tacoma; World War, 1939-1945--Economic & industrial aspects--Tacoma; General Mills, Inc., Farm Service Division (Tacoma);

A19193-1

Air Reduction Sales interior of plant. In 1942 Air Reduction Sales Co. opened up a oxygen gas production plant. Oxygen gas is used in large quantities for cutting steel plates in ship building and it is also used in welding. The plant will be able to support the war effort by producing the chemical necessary for government vessels, and making it available locally.


Factories--Tacoma; Machinery; Storage tanks--Tacoma; Air Reduction Sales Co. (Tacoma);

A19296-3

Interior of office, Great Northern. Employees help individuals including two nuns and a soldier with tickets and travel plans. Other employees handle other work at their desks. (alternate address 112-18 So. 9th)


Railroads--Tacoma--1940-1950; Great Northern Railway Co. (Tacoma); Ticket offices--Tacoma--1940-1950;

D20105-2

Hooker Electro-Chemical parking area. One of the buildings at the far end of the parking lot and the water tower remind workers of "Safety First". Hylebos waterway can be seen in the background as well as cranes used for loading and unloading materials from ships and barges.


Chemical industry--Tacoma--1940-1950; Hooker Electrochemical Co. (Tacoma);

D20105-3

Hooker Electrochemical parking area. This view shows the Hylebos waterway and a ship moored at the company's dock. Railroad tracks run through the plant to make more transportation accessible. TPL-2489.


Chemical industry--Tacoma--1940-1950; Hooker Electrochemical Co. (Tacoma);

D20140-4

Televed, Inc., Railway Exchange Building, Chicago, Illinois, for Mr. D.A. Highet. A gasoline-powered generator, on a movable housing made for riding on railroad tracks sits on one set of track while an engine and railroad cars head toward the camera from the opposite direction.


Railroad tracks; Railroads; Electric generators;

A20974-1

Machinery at Cammarano Brothers bottling company, Phillip Cammarano. The Cammarano Brothers were bottlers of beer and other carbonated beverages. Four brothers owned and operated the facility, Phillip J., James J., and William B., and Edward J. Cammarano.


Bottling industry--Tacoma--1940-1950; Cammarano Bros. (Tacoma);

D21583-1

Timber Fabrication Co. was building prefabricated materials for mass productions of commercial and residential structures. Pre-fabrication had advantages, it offered overall savings on materials and rapid production of structures. View of building progress on building by Timber Fabrication Co. with consulting engineers, William D, Smith and Clyde E. Murray.


Lumber industry--Tacoma--1940-1950; Prefabricated buildings--Tacoma; Progress photographs; Timber Fabrication Co. (Tacoma);

D24476-2

Douglas Fir Plywood Association. A farmer leans against his new plywood silo standing next to his barn. A conveyor belt loader leans against the top of the silo.


Farmers--Puyallup; Silos--Puyallup; Plywood;

D24046-3

ca. 1946. The unveiling of the giant cross section of a tree trunk at the Northwest Door Company. In the summer of 1946, Northwest Door Co. cut down this tremendous old growth Douglas Fir tree southwest of Mt. Rainier. They shipped a cross section of the stump to their Tacoma plant. The tree was almost 14 feet in diameter. The small signs on either side of the section of tree show what years each ring represents and events that occurred that year. A crowd turned out in the rain to watch the unveiling of the log. The cross section of fir was moved in 1965 to the Lakewood branch of the Pierce County Library system.


Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950;

A24163-10

For I.W. Johnson Engineering Company. An interior view of a sawmill near Packwood, Washington. A large, radial-arm saw, upper center, cuts lumber to length. A narrow conveyor belt seen in the foreground moves lumber through the mill.


Saws; Mills--Packwood--1940-1950; Logs; Lumber industry--Packwood--1940-1950; Woodcutting--Packwood--1940-1950;

A24163-12

For I.W. Johnson Engineering Company. An interior view of a sawmill near Packwood, Washington. Logs just delivered to the mill have already been cut into convenient lengths (usually 32 feet) for the machines that will have the next go at cutting the logs into lumber. (Fortune Magazine, April 1934)


Saws; Mills--Packwood--1940-1950; Logs; Lumber industry--Packwood--1940-1950; Woodcutting--Packwood--1940-1950;

A24163-2

An interior view of a sawmill near Packwood, Washington. Large logs are stacked on the left while two men operate the "head-rig", one to the right and one in the center, background. The log is being broken down. Running the "head-rig" is a two person operation. The "sawyer", in the center right, stands beside the carriage on which the log is clamped and as the carriage swings the log into the teeth of the saw he signals, with hand signals, to the "setter", on the right, operating the carriage, where and how much to cut. For I.W. Johnson Engineering Company. (Fortune Magazine, April 1934)


Saws; Mills--Packwood--1940-1950; Logs; Lumber industry--Packwood--1940-1950; Woodcutting--Packwood--1940-1950;

D25951-1

This aerial view of the "head of the bay" (the south end of the Foss Waterway) shows the Tacoma Boat Building Company and the Reliance Lumber company (to the right) as they appeared in March of 1947. The Northern Pacific Railroad roundhouse can be seen at 2211 East D Street, just above Tacoma Boat. Tacoma Boat were the exclusive designers and manufacturers of "Northern Dragger" winches, "North" purse seine winches, "Northern" anchor winches and "Northern" purse seine and dandelion blocks. They built wood and steel trollers, purse seiners and tuna clippers. (T. Times, 2/26/47, p. 9-B).


Industrial facilities--Tacoma; Boat & ship industry--Tacoma--1940-1950; Tacoma Boat Building Co., Inc. (Tacoma); Northern Pacific Railway Co. (Tacoma); Railroad roundhouses--Tacoma; Aerial photographs;

D25045-2

Cascade Pole Co. manufactured poles and posts using Tacoma lumber. They manufactured their own creosote, and pressure creosoted their products for longer durability. Victor C. Monahan was President and J. R. McFarland was the Vice-President. Exterior view of Cascade Pole Co., a pole is being shaped using this machine.


Logs; Lumber--Tacoma; Lumber industry--Tacoma--1940-1950; Machinery; Cascade Pole Co. (Tacoma);

D25045-6

Cascade Pole Co. manufactured poles and posts using Tacoma lumber. They manufactured their own creosote, and pressure creosoted their products for longer durability. Victor C. Monahan was President and J. R. McFarland was the Vice-President. Exterior view of Cascade Pole Co., logs are being brought into the plant by the railroad car.


Logs; Lumber--Tacoma; Lumber industry--Tacoma--1940-1950; Railroad freight cars--Tacoma; Cascade Pole Co. (Tacoma);

D25372-3

Cavanaugh Lumber was owned by Cecil Cavanaugh. In 1931 they had a fire that destroyed most of their plant and a significant amount of their stock. They were able to rebuild and expand their business. View of unidentified man from Cavanaugh Lumber unloading plywood using a tool that measures the width of plywood, from company truck, photo ordered by Douglas Fir Plywood Association.


Plywood; Lumber industry--Tacoma--1940-1950; Trucks--Tacoma--1940-1950; Cavanaugh Lumber Co. (Tacoma); Douglas Fir Plywood Association (Tacoma);

D17820-3

Leo Olsen lost the use of his legs to infantile paralysis when he was 9 years old, but he was determined to be part of WWII. Although a tailor by trade, and a pianist, he found work at the Olin Coporation aluminum plant, on the tide flats, running one of the giant cranes that towered over the electric furnaces. This photograph of Mr. Olsen at the controls of his crane was taken in June of 1944 for the Tacoma Chamber of Commerce. (T. Times, 6/27/44, p. 2). Tacoma Chamber of Commerce Manpower publicity at Olin Corp.


Aluminum industry--Tacoma--1940-1950; Handicapped persons--Tacoma; Olin Industries, Inc. (Tacoma); Olsen, Leo;

D17007-11

Tacoma Boat Facilities. Interior of Tacoma Boatbuilding Co. plant. Elaborate machiery was used for boatbuilding. TPL-6651


Boat & ship industry--Tacoma--1940-1950; Tacoma Boat Building Co., Inc. (Tacoma);

D17008-3

Tacoma Boat Facilities. Meeting the Army and Navy compliance for the wood and diesel type ships is an important part of the building process for Tacoma Boatbuilding Co. TPL-8862


Boat & ship industry--Tacoma--1940-1950; Tacoma Boat Building Co., Inc. (Tacoma);

D17007-9

Tacoma Boat Facilities. Wood and Diesel ships were built by Tacoma Boatbuiling Co. for new Army and Navy fleets. This view shows stockpiles of lumber at Reliance Lumber Co. adjacent to Tacoma Boatbuilding Co.


Boat & ship industry--Tacoma--1940-1950; Tacoma Boat Building Co., Inc. (Tacoma); Lumberyards-- Tacoma; Reliance Lumber Co. (Tacoma);

D17121-3

Pacific Carbide exterior and interior for record. On March 4, 1944 E. F. Goodner of Pacific Carbide & Alloys Co. announced that the plant would close down for an indefinite amount of time. The plant employed 65 people. Exterior view of plant.


Coke industry--Tacoma; Pacific Carbide & Alloys Co. (Tacoma);

D17139-3

Coke plant interior and exterior for Wilkeson Products. The Wilkeson Products Coke plant is an affiliate of the St. Paul and Tacoma Lumber Company and only uses Wilkeson coal, the only coking coal in Washington. TPL-7988


Coke industry--Tacoma; Wilkeson Co. (Tacoma);

D17170-19

Series of Wilkeson Products interior and exterior mine photographs. Jim "Corkie" Kelly, miner's lamp shining, was pictured at the working face of the Wilkeson Products mine on March 18, 1944. The ladder to the right accessed a chute which was being driven up the coal seam. The large heavy sawn timbers held up the roof above Mr. Kelly's head. The Wilkeson Products mine had a short life span of less than two years. The U.S. government had pumped in money to support the coal industry during WWll with the intention of helping the war effort. The mine was built in 1943 using the best construction and equipment possible but was only able to produce 54,000 tons of coal. Two miners, Jack Cloves Smith and Harold E. Barber, lost their lives at the mine. (Kombol, Bill, "When Coal Was King," Voice of the Valley, p. 5, 1-3-2012) TPL-6618


Coke industry--Wilkeson; Coal mining--Wilkeson; Coal miners--Wilkeson; Wilkeson Coal & Coke Co. (Wilkeson); Kelly, Jim; World War, 1939-1945--Economic & industrial aspects--Wilkeson;

D17170-2

Wilkeson Products interior and exterior of mine. In 1888 Wilkeson Coal & Coke Co. began producing the best grade of coke available in the West. Wilkeson Co. mine employed 200 employees, they lived with their families in Wilkeson, Washington, a small mining town in eastern Pierce County. View of filled coal cars at Wilkeson Coal & Coke Co. TPL-6615


Coke industry--Wilkeson; Coal mining--Wilkeson; Wilkeson Coal & Coke Co. (Wilkeson);

D17170-9

Wilkeson Products interior and exterior of mine and coke plant. Wilkeson Coal & Coke Co. had the largest coal and coke mine in the State of Washington. They were one of the only completely electrified mining plants in the world, and always had the most modern machinery available. (previously numbered G75.1 image 142)


Coke industry--Wilkeson; Coal mining--Wilkeson; Wilkeson Coal & Coke Co. (Wilkeson);

Results 151 to 180 of 2783