Large pieces of machinery manufactured by Star Iron & Steel. Cylindrical in shape, possibly a drum of some sort. Photographed on April 9, 1970. Photograph ordered by Star Iron & Steel, Tacoma.

Machinery; Star Iron & Steel Co. (Tacoma);

Western Gear Corporation of Seattle installed new machinery at St. Regis Paper Co. Tacoma plant on October 13, 1961. View of machine with mountain of pulp-mill chips in background. The kraft mill stored outdoors piles of the chips, most of them purchased from local plywood and sawmills.

Machinery; Western Gear Corp. (Seattle); St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970;

St. Regis Paper Co. employee leans over a Langston machine on September 29, 1961. Man appears to be working with small roll of kraft paper. The Samuel M. Langston Co. made machines, basically rewinders, for the corrugated container industry. Based in Camden, N.J., they were in operations for more than one hundred years. Photograph ordered by the Samuel Langston Co.

Machinery; Paper industry--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970;

A series of photographs were taken on February 28, 1957, at an unidentified laboratory involving product testing. This technician appears to be monitoring the strength of note-size paper using the Elmendorf Paper Tester. Manufactured by the Thwing Instrument Co. of Philadelphia, the arrow on the paper tester is pointing at 30 on the scale. Photograph ordered by Merchandising Factors, Seattle.

Machinery; Testing; Measuring; Paper products; Merchandising Factors, Inc. (Seattle);

There are printed instructions on the Bausch & Lomb machine that show a technician how to measure "Printing opacity" and "Opacity". He is looking at a small negative or picture with a magnifying glass. Copies of prints are laying next to the machine. Photograph ordered by Merchandising Factors, Seattle.

Machinery; Hand lenses; Testing; Merchandising Factors, Inc. (Seattle);

Douglas Fir Plywood Association employees were photographed in February, 1957, in the association's mail room facilities. Here two workers, wearing aprons, keep careful eyes on the operating machinery. They appear to be turning handles nearly in unison. Photograph ordered by Douglas Fir Plywood Association.

Machinery; Douglas Fir Plywood Association (Tacoma);

Three unidentified employees of Coast Iron & Machine Works pose in the firm's Dock St. plant on September 24, 1924. One man fits neatly inside one of Coast Iron's products. G35.1-087

Coast Iron & Machine Works (Tacoma);

Two unidentified men gaze at giant wheel constructed at Coast Iron & Machine Works, 1117 Dock St., in August of 1924. The machinery firm was operated by J.A. McRae and R.C.McRae. G35.1-088

Coast Iron & Machine Works (Tacoma);

Two Ford automobile engines are on display in the administrative area of TAM Engineering Corporation. Three people are seen at work in the common work area separated from the shop at the other end of the building. One of the company's executives is seen in a private office with a glass window into the common area. James N. Cutler was manager of the authorized Ford engine reconditioning facility.

Machine shops--Tacoma; TAM Engineering Corp. (Tacoma); Offices--Tacoma--1950-1960; Desks; Office workers--Tacoma--1950-1960;

A "Shim Sizer" manufactured by Globe Machine Manufacturing Company, Inc.

Machinery industry--Tacoma--1950-1960; Machinery; Globe Machine Manufacturing Co. (Tacoma);

Machine layout setup in plant of a "sealing spreader" for Globe Machine Manufacturing Co., Inc. Globe was located at 301 E. 11th. The company manufactured veneer, plywood and woodworking machinery. Calvin D. Bamford was President and Stuart Bryan Vice-president and secretary/treasurer.

Machinery industry--Tacoma; Machinery; Globe Machine Manufacturing Co. (Tacoma);

Views of the plant at Hudson Machinery Company, Inc. Hudson Machinery were dealers in machinery located at Townsend at Minneapolis, Tacoma Tideflats. Frank C. Hamprecht was president and Walter E. Liggett was secretary-treasurer. Belts of varying thickness and chain link and spools lie on the floor, shelves and hang from the ceiling.

Hudson Machinery Company, Inc. (Tacoma); Warehouses--Tacoma--1950-1960; Machinery; Machinery Industry--Tacoma--1950-1960;

Views of the plant at Hudson Machinery Company, Inc. Hudson Machinery were dealers in machinery located at Townsend at Minneapolis, Tacoma Tideflats. Frank C. Hamprecht was president and Walter E. Liggett was secretary-treasurer.Long metal rods occupy most of this picture with rolled up chains lying to the right.

Hudson Machinery Company, Inc. (Tacoma); Warehouses--Tacoma--1950-1960; Machinery; Machinery Industry--Tacoma--1950-1960;

Views of the plant at Hudson Machinery Company, Inc. Hudson Machinery were dealers in machinery located at Townsend at Minneapolis, Tacoma Tideflats. Frank C. Hamprecht was president and Walter E. Liggett was secretary-treasurer. A unidentified man poses beside shelves filled with parts and a center cabinet filled with drill rods.

Hudson Machinery Company, Inc. (Tacoma); Warehouses--Tacoma--1950-1960; Machinery; Machinery Industry--Tacoma--1950-1960;

Views of the plant at Hudson Machinery Company, Inc. Hudson Machinery were dealers in machinery located at Townsend at Minneapolis, Tacoma Tideflats. Frank C. Hamprecht was president and Walter E. Liggett was secretary-treasurer. This warehouse has belts hanging from the ceiling, machines in orderly rows and bins of parts to the left of the picture.

Hudson Machinery Company, Inc. (Tacoma); Warehouses--Tacoma--1950-1960; Machinery; Machinery Industry--Tacoma--1950-1960;

ca. 1952. Unidentified machinery for Western Machine Works, 666 E. 11th St. Western Machine Works was owned by Frank Schmitz. The back of the machinery has been draped in white for the studio to shoot a close up of the machinery for a layout.

Machinery; Western Machine Works (Tacoma);

A glue machine manufactured by Globe Machine. Its dimensions are 12' x 6' x 2'.

Machinery industry--Tacoma; Machinery; Equipment; Globe Machine Manufacturing Co. (Tacoma);

View of taping machine manufactured by Globe Machine; photograph ordered by Earl Sutton. Globe Machine Manufacturing Co. were manufacturers of veneer, plywood and woodworking machinery. The company was located at 301 East 11th Street. According to the 1951 City Directory, Calvin D. Bamford was listed as Secretary-Treasurer of the firm. He was listed as president by the time of the 1953 City Directory. The firm was listed in the City Directory from 1929 to 1988.

Machinery industry--Tacoma; Machinery; Equipment; Globe Machine Manufacturing Co. (Tacoma); Bamford, Calvin D.;

Studio set-up of hydraulic shear testing machine. Ordered by Globe Machine, Mr. Sutton. Globe Machine manufactured veneer, plywood and woodworking machinery. They were located at 301 East 11th Street. Calvin D. Bamford was president, Stuart Bryan was vice president, secretary and treasurer for the company at this time.

Machinery industry--Tacoma--1950-1960; Machinery; Globe Machine Manufacturing Co. (Tacoma);

A front-on view of a hydraulic press manufactured by Washington Steel & Welding Company. The company advertised their work as welding and steel fabricating, steel ship building, and steel tanks. Their president was A.E. McIntosh. R.B VanDeMark served as secretary-treasurer. They were located at 701 East D Street.

Machinery; Steel industry--Tacoma; Welding--Tacoma; Washington Steel & Welding Co. (Tacoma);

Engine room of Bright Star. Ordered by Dravis Engineering & Machine Works, Mr. Thomas. The Dravis Company was owned by Frederick and Virginia Dravis; they were located at 1101-07 Dock Street.

Machinery industry--Tacoma; Machinery; Dravis Engineering & Machine Works (Tacoma); Engine rooms--Tacoma;

This photograph from February, 1950, shows part of the engine rebuilding shop at TAM Engineering Corp, 3033 So. Lawrence St. Four workmen are assembling and bench testing rebuilt Ford "flathead" V8 engines. The TAM plant was the most modern Ford Authorized engine rebuilding plant in the Pacific Northwest. By 1950, they had already rebuilt over 50,000 engines and small parts for dealers in the Pacific Northwest and Alaska. TAM Engineering Corp. was acquired by the Oklahoma City-based firm, Autocraft Industries, in 1995. (TNT 2-14-1950, A-4) TPL-8482

Machine shops--Tacoma; TAM Engineering Corp. (Tacoma);

New machinery, TAM Engineering Corporation. Interior of Ford engine rebuilding shop. Workman measures cylinder bore of Ford "flathead" V8 engine block attached to a honing machine during rebuilding.

Machine shops--Tacoma; TAM Engineering Corp. (Tacoma);

Dravis Engineering and Machine Works was formerly Hicks-Bull Machine Company, Incorporated; the company was originall established in 1912. Dravis had licensed mechanical engineers and specialized in engineering, surveying, marine and general machinery manufacturing and repairs. The Dravis Company was owned by Frederick and Virginia Dravis; they were located at 1101-07 Dock Street. View of unidentified man demonstrating the use of a newly manufactured machine.

Machinery industry--Tacoma; Machinery; Equipment; Business enterprises--Tacoma; Dravis Engineering & Machine Works (Tacoma);

New plant, Titus Manufacturing Company, Center & Lawrence, Leon Titus. A bird's-eye view of work area and different work stations. Men are working with machines, tools, supplies and parts in factory area.

Machine Shops--Tacoma--1940-1950; Engines; Titus Manufacturing Co. (Tacoma)--Employees;

New plant,Titus Manufacturing Company, Center & Lawrence, Leon Titus. Rows of rebuilt Ford "flathead" V8 engines are awaiting shipment. A workman is loading one on a cart with an overhead winch. Tools, parts and supplies are shown in the factory area in the background.

Machine Shops--Tacoma--1940-1950; Engines; Titus Manufacturing Co. (Tacoma)--Employees;

Shartle Brothers Machinery. A specialized form seen from one side, the form decreases in size from the top to a cylinder at the lower edge of the floor. Pulleys are seen on the left and a hose is connected to the form on the right.

Machinery;

Northwest Syndicate Inc. was an electrical equipment manufacturing company located at 1321 A Street in downtown Tacoma. George F. Russell was the company's President and Julius W. Mann was the Vice-President. View of men looking at a 15 foot long by 5 foot high machine at Northwest Syndicate Inc. facilities; photo ordered by B. F. Goodrich Company in Seattle, Washington.

Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Laborers--Tacoma; Northwest Syndicate, Inc. (Tacoma);

In August of 1948, an unidentified employee of the I.W. Johnson Engineering Company, 601 East 11th Street, was photographed standing next to a new ban resaw built by the company. For approximately 40 years the I.W. Johnson Engineering Company designed and built sawmill equipment and machinery for any size business in the lumber industry. Under Irvin W. Johnson, the company had a long successful history of working with the leading lumber companies of Tacoma. Mr. Johnson died in 1973 at the age of 92; he had lived in Tacoma for over 40 years.

Machinery; Equipment; Machinery industry--Tacoma; Engineering--Tacoma; Industrial facilities--Tacoma; Laborers--Tacoma; I.W. Johnson Engineering Co. (Tacoma);

Truck hauling large machine, designed and manufactured by I. W. Johnson Engineering Company. The machine is possibly a wood chipping machine or a log debarking machine, Northwest Machine Works building in background. I. W. Johnson machines could be found in the lumber mills and plants throughout Tacoma and other Pacific Northwest towns and cities, the machines were custom built to fit your company's needs.

Machinery industry--Tacoma--1940-1950; Machinery; Trucks--Tacoma--1940-1950; Engineering--Tacoma; Industrial facilities--Tacoma; I.W. Johnson Engineering Co. (Tacoma); Northwest Machine Works (Tacoma);