Several unidentified members of Tacoma's Chamber of Commerce paid a visit to the Danish motorship "Tacoma" when she docked at the Defiance Lumber Mill on her maiden voyage January 14, 1927. They posed with members of the crew for this portrait. The "Tacoma" was built in Copenhagen for the Orient Steamship Company of Copenhagen. She was loading Northwest lumber enroute to Japan. She was 400 feet in length with a beam of 55 feet. She ran under the power of two diesel engines with a crew of 15 officers and 34 crewmen. (TNT 1/14/1927, pg. 20) (WSHS)

Lumber industry--Tacoma--1920-1930; Cargo ships; Shipping--Tacoma--1920-1930; Orient Steamship Co. (Copenhagen); Commerce--Tacoma--1920-1930; Chamber of Commerce (Tacoma)--1920-1930;

Members of the Western Retail Lumbermens' Association pose in February of 1927 in front of a little bungalow erected on the roof of the Winthrop Hotel in honor of the group's annual convention. The bungalow was made entirely of local wood and demonstrated its use in construction. When the 24th annual convention concluded February 26, 1927, new leaders had been elected for the coming year. Pictured leaders are, back row, left to right: George A. Heilman (Wyo.), H.J. Sawtelle (Mt.), W.B. Hussman (Idaho), I.G. Kjosness (Idaho), and R.O. Bushong (Ore.) Front row, left to right, F.C. Kendall (Spokane), J.W. Burt (Mt.), Robt M. Graham (Mt.), R.M. Cross (Utah) and E.J. Ostrander (Idaho.) (TDL 2/27/1927, pg. A-5; TNT 2/23/1927, pg. 7) (WSHS- negative A893-0)

Washington Lumber Dealers Association (Tacoma); Business people--Tacoma--1920-1930; Lumber industry--Tacoma--1920-1930; Hotel Winthrop (Tacoma);

Loading cut lumber from the docks onto the St. Paul and Tacoma Lumber Company's lumber ship "Lake Frances".

Lumber industry--Tacoma--1930-1940; St. Paul & Tacoma Lumber Co. (Tacoma); Cargo ships--Tacoma; Shipping--Tacoma--1930-1940;

One man sitting atop a large log with six men standing in front of the log, which is being transported on a rail car. In the 1930's, mammoth old growth trees were still being harvested to supply lumber and also to advertise the Northwest timber industry. This 700 year old giant was cut on the St. Paul & Tacoma Camp 5 holdings near the junction of the Puyallup & Mowitz Rivers. It was the largest seen at the mill in 15 years, 10 1/2 feet across and estimated at 45,790 board feet. If converted into lumber, this one tree could supply the wood for 4 good 5 room houses. However, due to advanced age and deterioration, 2/3 of the tree was unusable. The remainder was shipped to Olympia to peel for veneer. (T. Times 10/19/1935, pg. 1)

Lumber industry--Tacoma--1930-1940; St. Paul & Tacoma Lumber Co. (Tacoma); Logs; Railroad freight cars--Tacoma;

ca. 1936. West Coast Plywood Mill. Artistic view of buildings and structures at mill.

Lumber industry--Tacoma--1930-1940; West Coast Plywood Mill (Tacoma);

ca. 1937. Worker photographed applying adhesive and laying a plywood subfloor at an unidentified location, circa 1937. (filed with Argentum)

Plywood; Douglas Fir Plywood Association (Tacoma);

Fallen piles of wood - 2x4, 2x6, etc.

Lumber;

This photograph of the Mountain Lumber Company, located at 919 East F Street on the Tacoma tideflats, was taken on February 3, 1939. Paul Billings, born in Lyndon, Kansas, moved to Tacoma in 1920 and opened the Mountain Lumber Co. in 1924. The mill was rebuilt after it burned in a spectacular fire in 1931. In January of 1950 Mountain Lumber was purchased by the Dickman Lumber Company.

Mountain Lumber Co. (Tacoma); Lumber industry--Tacoma--1930-1940;

Mountain Lumber Co. Stacks of lumber with large crane in between them.

Mountain Lumber Co. (Tacoma); Lumber industry--Tacoma--1930-1940;

On February 17,1941, a log from a great fir tree has been delivered to St. Paul & Tacoma Lumber Co. where it has been loaded on the carriage in the mill. The slab cut has been taken off and the saw is going into the log for the second cut. (T. Times 2/26/1941, pg. 13)

Lumber industry--Tacoma--1940-1950; St. Paul & Tacoma Lumber Co. (Tacoma); Logs; Saws;

Ben Cheney and an unidentified woman sit at the back of a convertible on the dock next to the "Oregon." Richard Studio notes state that this picture was taken in Oregon. The cargo ship was built by Seattle-Tacoma Shipbuilding Corp. in Tacoma and was launched as the Cape Cleare.

Cheney Lumber Co. (Tacoma); Cheney, Ben B., 1905-1971; Cargo ships; Convertible automobiles--1940-1950;

On May 22, 1939, employees at the St. Paul & Tacoma Lumber Co. mill walked out, halting operations in support of their fellow striking employees at the logging camps. The workers at the camps had ceased work on May 15th. Employees at the mill walked out and filed formal charges of unfair labor practices against the company when they found out that officials planned to keep the mill running, processing logs from other sources. (T. Times 5/23/1939, pg. 3-article only)

Lumber industry--Tacoma--1930-1940; St. Paul & Tacoma Lumber Co. (Tacoma); Strikes--Tacoma--1930-1940;

Sales Grange Baseball Team, 1938 Pierce County Champions. Saxton Lumber Company baseball team c/o Paul Froman. 12 men in uniform, man center back in suit, equipment in front; posed on wooden bleacher steps.

Saxton Lumber Co. (Tacoma)--Employees; Lumber industry--Tacoma--1930-1940; Baseball players--Tacoma--1930-1940;

Renton housing project showing use of "Cheney Studding". Ordered by Cheney Lumber Company. [Also dated 06-09-1942]

Cheney Lumber Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Housing developments--Renton;

Renton housing project showing the use of standardized Cheney studding. Construction is the Highlands Development, east of I-405. Photographs made for Cheney Lumber Co.

Cheney Lumber Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Housing developments--Renton; Construction--Renton;

Renton housing project showing use of "Cheney Studding". Ordered by Cheney Lumber Company. [Also dated 06-09-1942]

Cheney Lumber Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Housing developments--Renton; Construction--Renton;

On the evening of June 15, 1942, the sawmill at the Henry Mill & Timber Co. was fully engulfed in flames. The fire department managed to save the planer plant, warehouse and offices, but the sawmill was a complete loss. The owners swore to rebuild immediately. However, after the fire, the company's business began to consist mostly of prefabricated items for the military. (T. Times 6/16/1942, pg. 1)

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Fires--Tacoma--1940-1950;

On April 4, 1942, after several aborted attempts, the Northwest Hauling Company successfully raised a 150 foot smokestack at the new plant of Puget Sound Plywood located at 230 E. "F" Street. The huge steel stack weighed 13 tons and was constructed by Seattle Boiler Company. Once lifted into place on its 30 foot tall base, it jutted 180 feet into the air over the tideflats. The plant was expected to be fully operational in 30 days. The erection of the stack required several days of planning by the hauling company owned by Dan Cooney. Puget Sound Plywood, the first cooperative plywood plant in Tacoma, opened June 1, 1942. It had 298 members who each contributed $1,000 and received the same hourly pay and percentage of the company's profits. It was built on 3 1/2 acres at the mouth of the City Waterway. (T. Times 4/6/1942, pg. 2)

Puget Sound Plywood, Inc. (Tacoma); Plywood; Lumber industry--Tacoma--1940-1950; Northwest Hauling Co. (Tacoma); Smokestacks; Cooperatives--Tacoma;

Henry Mill shots of hardware and quantity. Henry Mill & Timber Co. was a leader in the pre-fabricated lumber field. Pre-fabricated lumber helped speed the war effort in filling their government orders. Henry Mill also had their products throughout Tacoma housing projects. Exterior view of Henry Mill & Timber Co. plant.

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Prefabricated buildings--Tacoma; Henry Mill & Timber Co. (Tacoma);

Buffelen Lumber and Manufacturing Company.

Buffelen Lumber & Manufacturing Co. (Tacoma); Lumber industry--Tacoma--1940-1950;

Henry Mill, construction of prefabricated trusses. During the war, Henry Mill was active in lumber prefabrication.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

Henry Mill was located at the foot of No. Starr St., right at the waterfront. It was on the 28 acre site of the old Tacoma MIll Co. During the war, Henry Mill specialized in prefabricated elements for the military. The company was taken over in 1945 by Tacoma Lumber Fabricating Co. The photograph shows lots of stored lumber as well as a couple of cranes.

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Henry Mill and Timber Company. Burner and lumber storage dock along the Tacoma waterfront. Henry Mill began operations at this site in 1925. It was formerly the site of the Old Tacoma Mill Co. TPL-8381

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Henry Mill and Timber Company. Lumber storage dock along the Tacoma waterfront. Began operations at this site in 1925.

Lumber industry--Tacoma--1940-1950; Henry Mill & Timber Co. (Tacoma); Mills--Tacoma--1940-1950; Waterfronts--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950;

Henry Mill, construction of trusses. Henry Mill was located at 3001 No. Starr, the former site of the old Tacoma Mill Co. The mill was operated by John F. Buchanan, pres., and William F. Buchanan, VP. During the second World War, they became active in lumber prefabrication. Large buildings, such as hangars, were prebuilt in pieces and reassembled on arrival at their destination.

Lumber industry--Tacoma--1940-1950; Trusses--Tacoma; Structural frames--Tacoma; Building construction--Tacoma; Henry Mill & Timber Co. (Tacoma);

ca. 1946. The unveiling of the giant cross section of a tree trunk at the Northwest Door Company. The Northwest Door Co. plywood and veneer plant was founded in 1935. In the summer of 1946, the company logged a gigantic old growth Douglas Fir on their logging property southwest of Mt. Rainier. The tree was almost 14 feet in diameter. A cross section of the trunk was removed and sent to the Tacoma plant for display. Here the section is covered by a curtain prior to its unveiling. The cross section of fir was moved in 1965 to the Lakewood branch of the Pierce County Library system. See image #3 for the unveiling.

Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950;

An elevated view of the Defiance Mill saw line for I.W. Johnson Engineering. The gang type saw mill the Doud brothers built in 1929 was particularly adapted to sawing smaller logs. The gang mill cut with greater precision and left the lumber much smoother. A person who ran a gang saw was called a "gangster".

Lumber industry--Tacoma--1940-1950; Defiance Lumber Co. (Tacoma); Saws; Mills--Tacoma--1940-1950;

Douglas Fir Plywood Association. A young girl looks up at the enormous log section. The annual rings show the tree was 586 years old. It would have provided much good lumber even before Columbus landed in America. Long over-ripe, rot had begun to appear just inside the bark at the base of the trunk and much of the upper part was decayed. (T.Times, 10/16/1946, p.4; TNT 8/21/1946, pg. 1)

Lumber industry--Tacoma--1940-1950; Logs; Girls--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950;

Rucker Brothers trucking company was owned by Burrell and Murrell Rucker, they were located on 733 East 11th Street, on the same site as the St. Paul and Tacoma Retail Lumberyard. View of Rucker Brothers truck loaded with lumber, St. Paul and Tacoma Lumberyard in background. St. Paul and Tacoma lumber was shipped throughout Washington in Rucker trucks.

Lumberyards--Tacoma; Lumber industry--Tacoma--1940-1950; Shipping--Tacoma; St. Paul & Tacoma Lumber Co. (Tacoma); Rucker Brothers (Tacoma); Trucks--Tacoma--1940-1950; International trucks;

Cheney Lumber Mills could be found throughout Washington, Oregon and California. The Tacoma plant had a sawmill, dry kiln, planning mill, log sorting area, storage facilities and loading areas. This plant employed approximately forty people. Exterior view of Cheney plant, laborers appear to be stacking and moving studs by using equipment.

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1940-1950; Hoisting machinery; Industrial facilities--Tacoma; Cheney Lumber Co. (Tacoma);