Modular home. St. Regis Paper Co. would make their "MODS" modular homes available for touring at the 24th annual Tacoma Home Show held March 31- April 5, 1970. The three sections of the home would be transported to the University of Puget Sound Fieldhouse's parking lot where they would be assembled. The modular home could apparently be assembled in one day, including carpeting. The "MODS" were geared toward people looking for affordable, low-cost housing. St. Regis was a leader in the fast-growing field of modular home construction. Photograph ordered by St. Regis Paper Co. (TNT 3-22-70, D-10--article; TNT 4-1-70, D-16 - article)

St. Regis Paper Co. (Tacoma)--1970-1980; Prefabricated houses; Signs (Notices);

Modular home on the move. "Here come the MODS" warned the sign plastered to a section of modular homes that was being transported to the University of Puget Sound Fieldhouse in mid-March, 1970. The "MODS" would be on display at the 24th annual Tacoma Home Show to be held March 31 - April 5th. The manufacturer was the St. Regis Paper Co., a leader in the Pacific Northwest's fast-growing modular home construction field. Photograph ordered by St. Regis Paper Co. (TNT 3-22-70, D-10--article)

St. Regis Paper Co. (Tacoma)--1970-1980; Prefabricated houses; Trucks--Tacoma--1970-1980;

Modular home units. A Kenworth truck has just pulled up to the University of Puget Sound Fieldhouse on March 18, 1970, and will shortly be unloading one section of a modular home which will be displayed during the annual Tacoma Home Show. The modular homes, called "MODS," were manufactured by St. Regis Paper Co. and aimed toward buyers seeking low-cost homes. They could be assembled in one day at the buyer's lot. View of heavy duty truck with "Caution Wide Load" sign and part of modular home; the university's Baker Stadium is in rear. (TNT 3-22-70, D-10- article)

St. Regis Paper Co. (Tacoma)--1970-1980; Trucks--Tacoma--1970-1980; Prefabricated houses;

1973 Richards stock footage. Aerial view in July of 1973 of the St. Regis Paper Co. The Puyallup Waterway is directly behind the plant. Due to St. Regis' vigorous efforts to curtail pollution, there is no sign of the plant's usual massive smoke emissions. TPL-5484

St. Regis Paper Co. (Tacoma)--1970-1980; Aerial views; Puyallup Waterway (Tacoma);

St. Regis Paper Company (Kraft Pulp Division), overaged destroyer to be sunk for breakwater. The 20-year-old destroyer, name unknown, was to be sunk in Commencement Bay to provide protection for the St. Regis wharf. Her sister ship had previously been scuttled in British Columbia, also for use as a breakwater. Both ships had been resting in Lake Washington for ten years. (T. Times, 9-19-1940, p. 1- alt. photo)

Paper industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; Scuttling of warships--United States; Warships--Tacoma--1940-1950;

Doomed Destroyer read the mournful heading for this front-page photograph than ran in the Thursday, September 19, 1940 edition of the Tacoma Times. The 20-year-old warship was being scuttled in Commencement Bay that day to serve as a breakwater to protect the St. Regis wharf. The red-painted 330-foot destroyer hulk, name since lost, had been owned by the Foss company for the past ten years. Derrick of the pile driver used in the operation is in the background along with a tugboat and St. Regis's dock. (T. Times 9-19-1940, p. 1)

Paper industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; Warships--Tacoma--1940-1950; Tugboats--Tacoma--1940-1950; Scuttling of warships--United States; Piers & wharves--Tacoma--1940-1950; Hoisting machinery;

Riegel Carolina Paper & Pulp Mill looking out on the docks on a ship named Mogul with a striped and lettered G figure.

Fischer & Porter Co. West Tacoma Newsprint Co. in Steilacoom, WA.

The completion of the kraft paper mill in Tacoma, allowed St. Regis a considerable increase in the paper production industry. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; logs have been loaded onto the train cars, and will be transported out of Mineral Forest. TPL-5680

Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Railroad cars--Mineral; Railroad tracks--Mineral; Railroads--Mineral; St. Regis Paper Co. (Mineral);

St. Regis was established in Tacoma in 1928, the New York firm purchased the industrial site, modernized it and began operations in 1936. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; high line yarder is moving the logs and safely loading them onto trucks.

Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);

St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. View of the St. Regis Paper Company's crew at Camp #2, located in Mineral, Washington; giant firs have been cut and will be used at the St. Regis paper mill located in Tacoma.

Woodcutters--1940-1950; Loggers--Mineral--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);

St. Regis is one of the pulp and paper companies that carry the paper producing cycle all the way from wood, to pulp, to paper, and into other various products. View of unidentified worker sitting in an operating booth, he is likely in the area where logs are kept prior to the wood chipping process.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Logs; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis' first mill was located in Deferiet, New York; they now had paper and pulp mills located throughout the world. Interior view of the Tacoma St. Regis plant, an unidentified man is working with recently installed equipment. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis began producing paper in January 1949, prior to this the company had primarily been a pulp mill and produced Multiwall bags. Interior view of St. Regis plant, a laborer is working with a General Electric control panel; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Control rooms--Tacoma; Laborers--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis plant, this battery of ten "Jones Majestic" Jordans is each driven by a 400 horsepower motor, the Jordans prepare stock for the Fourdrinier paper machines. Photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

St. Regis mills can be found in 23 locations across the United States, they have six plants in Canada, and one in Belgium, Brazil and Argentina. Interior view of St. Regis, view of paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis company spent the last few years focusing on expanding the Tacoma plant, the Pensacola, Florida plant would begin expanding during 1949. Interior view of St. Regis plant; battery of jordans each driven by a 400 horsepower motor, these prepare stock for the Fourdrinier paper machine. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of plant, large rolls of paper are being processed after going through the "wet end" machine, they are at the pre-dryer stage. The paper then goes through a "Flakt air dryer" prior to being cut, baled, packaged and distributed. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers. TPL-6811

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Left end of bridge and trolley, Harry S. Pearson and R.E. Morgan. Large rolls of paper are lying on the floor of a storage room while a man moves one of the rolls using a hoist maneuvered from a control booth near the ceiling.

Paper--Tacoma--1940-1950; Paper industry--Tacoma--1940-1950; Hoisting machinery;

The pulp capacity at Tacoma has been planned so that this mill can make adequate quantities of bleached sulphate pulp available to the market, and at the same time supply the necessary bleached and unbleached sulphate pulp for its new high producing Kraft paper machine. Aerial view of St. Regis plant, located in Tacoma's tideflats area.

Paper industry--Tacoma--1940-1950; Aerial photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis office, Times, Maybin. St. Regis was planning immediate construction of $6 million kraft paper and bag mills. These three key men, studying plans for the construction, are, L-R, J.H. McCarthy, plant engineer, Walter DeLong, Vice President and director, manager of Tacoma operations, and Adolph C. McCorry, plant superintendent. Piles of logs and a water tower are seen outside the windows. St. Regis had been at this location since 1936. (T.Times, 8/21/1947, p.1)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Architectural drawings; Logs; Water towers--Tacoma--1940-1950; McCarthy, J.H.; DeLong, Walter; McCorry, Adolph C.;

Progress photographs at St. Regis, St. Regis Paper Company, Kraft Pulp Division. St. Regis Paper Company was well along in a big expansion program at the Tacoma plant, adding a multiwall bag plant as well as a pulp manufacturing plant. Tacoma was one of the locations of St. Regis that supplied pulp from their own mills for their kraft paper production. Adding the exterior to the new construction is nearly complete. (T.Times, 8/23/1948, p.5)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950;

St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. Tacoma's St.Regis plant would have their own research laboratory within the industrial site. Interior view of plant, paper roll is being moved by a large "Ederer" crane.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

An engineer works on machinery, a paper "tensiometer," at the St. Regis Paper Co., Kraft pulp division. The equipment has been "locked out" with a key, so that it can not be started while the engineer is working. The two year old paper machine was approximately a block long. In 1952, St. Regis produced 400 tons of unbleached pulp per day. 160 of those tons were bleached and made into dried heavy sheets & placed together into 400 lb. bales, put into boxcars & shipped to other mills or the open market. The remaining 240 tons was used to make multiwalled bags in the company's bag plant or wrapping paper. Picture taken for General Electric Supply, Apparatus Department.

Paper industry--Tacoma--1950-1960; Mechanical systems--Tacoma; Machinery; St. Regis Paper Co. (Tacoma)--1950-1960;

Koppers Precipitator at St. Regis Paper Co. Interior of building with brick wall with several round tanks of various sizes on top with pipes and valves coming out - some marked "danger-high voltage." St. Regis completed an eight year expansion and improvement program in 1952. Included in that program was the construction of a new combustion engineering company furnace. The six story high furnace had a capacity of 225 tons and was built in conjunction with the Koppers electric precipitator. The precipitator collected odor bearing particles before they escaped the chimney into the air thus reducing pollution and odor. (TNT 2-17-1952, pg. C-14)

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960;

An aerial view of St. Regis Paper Company plant showing the completed multi-wall bag plant (with the dark roof dotted with vents) and the narrow kraft-paper mill.

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

An aerial view of St. Regis Paper Company. Logs would be pulled up the ramp in the foreground from the log pond into the woodroom in the building close to the edge of Commencement Bay. TPL-5903

Paper industry--Tacoma--1950-1960; Mills--Tacoma; Logs; St. Regis Paper Co. (Tacoma)--1950-1960;

Aerial photograph to show the steel work on a new building at St. Regis, Tacoma. Construction of a bag plant at the St. Regis Paper company started in June 1951 with the driving of piling as the first step. The addition was built of steel and concrete and would be used for the production of industrial-use bags for cement, fertilizer and other materials needing heavy-duty holders. When completed, this plant would replace the leased plant at Seattle. (TNT 6/15/1951; St. Regis Paper Company 1951 Annual Report)

St. Regis Paper Co. (Tacoma)--1950-1960; Progress photographs; Building construction--Tacoma--1940-1950; Aerial photographs; Paper industry--Tacoma--1950-1960;

Shipping the finished product at the Rayonier and Rayflo plants, ordered by Malcolm McGhie. Much of the market for cellulose markets was overseas and the deepwater docking at Rayonier's Canadian subsidiary's Alaska Pine mill at Port Alice, BC, could accomodate large oil tankers and ocean vessels for overseas shipment. Here a forklift is being used to load a large vessel.

Paper industry--British Columbia--1950-1960; Alaska Pine & Cellulose Limited (Port Alice B.C.); Cargo ships--British Columbia;

Birchfield Boiler; heat exchanger and casing. This huge condenser is one of a pair manufactured by Birchfield Boiler for the St. Regis Paper and Pulp plant. The condenser is used to recover waste heat from pulp digesters. Because they come in contact with corrosive substances, the tubes are stainless steel. There are 1184 of them, more than 3 1/2 miles of tubing in each unit. The shells and ends are made of 1 1/2 inch steel plate. Each condenser was valued at $25,000. (TNT 3/13/1955, pg. B-17)

Birchfield Boiler, Inc. (Tacoma); Boilers; Boiler industry--Tacoma; Paper industry--Tacoma--1950-1960;