Studio set-up of hand board chips and shreds. Ordered by Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1950-1960;

A workman moves a stack of cartons of Wesco's sweet peas using a forklift in a large warehouse. The pallet supporting the cartons has been made using plywood. Cartons of StarKist tuna are stacked on the other side of the doorway. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Shipping--Tacoma--1950-1960;

Testing hardwood at the Plywood Research Foundation. Ordered by Douglas Fir Plywood Association.

Plywood Research Foundation (Tacoma); Plywood; Research facilities--Tacoma; Lumber industry--Tacoma--1950-1960; Laboratories--Tacoma--1950-1960; Douglas Fir Plywood Association (Tacoma); Product inspection--Tacoma; Testing--Tacoma;

Testing hardwood at the Plywood Research Foundation. Ordered by Douglas Fir Plywood Association.

Plywood Research Foundation (Tacoma); Plywood; Research facilities--Tacoma; Lumber industry--Tacoma--1950-1960; Laboratories--Tacoma--1950-1960; Douglas Fir Plywood Association (Tacoma); Product inspection--Tacoma; Testing--Tacoma;

Two workmen prepare a plywood wall for papering with a mural map at the Georgia Pacific Plywood Company in Olympia on December 24, 1951. Faint writing on the wall shows instructions for hanging the map. A wooden railing at the staircase on the right bends smoothly to a lower level in the building. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Georgia Pacific Plywood Co. (Olympia); Walls--Olympia; Maps;

A workman is papering a plywood wall at the Georgia Pacific Plywood Company in Olympia with a mural map of the State of Washington. Photograph was taken on Christmas Eve, 1951. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma); Georgia Pacific Plywood Co. (Olympia); Walls--Olympia; Maps;

Testing hardwood at the Plywood Research Foundation using testing equipment manufactured by The American Machine and Metals, Inc., in East Moline, Illinois. Ordered by Douglas Fir Plywood Association.

Plywood Research Foundation (Tacoma); Plywood; Research facilities--Tacoma; Lumber industry--Tacoma--1950-1960; Laboratories--Tacoma--1950-1960; Douglas Fir Plywood Association (Tacoma); Product inspection--Tacoma; Testing--Tacoma;

Plywood was used for sheathing and concrete forms during construction at the new Custer School. The school was designed by Lea, Pearson & Richards. The building was dedicated September 30, 1953. Ordered by Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Construction--Tacoma--1950-1960; Reinforced concrete construction--Tacoma--1950-1960; Custer School (Lakewood);

An operator for Douglas Fir Plywood is recording the results of a test performed on small plywood samples.

Lumber industry--Tacoma--1940-1950; Testing--Tacoma; Recording & registration--Tacoma; Research facilities--Tacoma; Plywood; Douglas Fir Plywood Association (Tacoma);

An operator for Douglas Fir Plywood stamps each sheet of plywood in a stack with "EXT-DFPA" denoting the grade and quality of plywood. The Douglas Fir Plywood Association stood behind the designations they developed to assure quality of the products distributed by their members.

Douglas Fir Plywood Association (Tacoma)--Products; Plywood;

The interior Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing overhead duct work and machinery in place. Ordered by Drew Engineering Company, Portland, Oregon, manufacturers of industrial air systems.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Drew Engineering Co. (Portland); Machinery;

The interior Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing the "wet end" of the paper producing process. The prepared pulp is diluted in the "headbox" with large quantities of water and evenly distributed on a fine, large, bronze wire woven as an endless belt 130 feet long and 216 inches wide and traveling at a speed of several hundred feet a minute. Ordered by Drew Engineering Company, Portland, Oregon, manufacturers of industrial air systems.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Drew Engineering Co. (Portland); Machinery; Fans (Machinery);

The interior Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing the paper-making machine that would roll out 200 tons of bleached Kraft paper per day to be used for food containers. The machine was 500 feet long, weighed 4,621,311 pounds and required 80 freight cars for shipment to Longview.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Machinery;

The interior Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing overhead duct work and machinery in place. Ordered by Drew Engineering Company, Portland, Oregon, manufacturers of industrial air systems.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Drew Engineering Co. (Portland); Machinery;

The interior Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing large conduit and a fan, part of the air system in the plant. Ordered by Drew Engineering Company, Portland, Oregon, manufacturers of industrial air systems.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Drew Engineering Co. (Portland); Machinery; Fans (Machinery);

An elevated view of one of the paper processes at Weyerhaeuser's bleached Kraft mill at Longview, Washington, and a machine manufactured by the Beloit company.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Machinery;

The exterior of one of the buildings at the Weyerhaeuser pulp mill at Longview, Washington, showing vents for the air system installed by Drew Engineering Company, Portland, Oregon. Longview was Weyerhaeuser's largest and most diversitied millsite in 1952. The site contained a plywood plant with a capacity of 6 million square feet of 3/8-inch plywood per month and a bark products plant where Silvacon was produced for use as plywood glue, rubber products, oil well drilling, mastic flooring and in plastics. The location also maintained a pulp log barker, chippers for the pulp plants, and a sulphate pulp mill with its 225 tons of bleached Kraft pulp each day. The wood fiber plant processed Silvacel for cold storage insulation and oil well drilling, and Silvawool for home and building insulation. The plant also maintained a development department and the fabrication department which turned out Monocord trusses and laminated beams. (Weyerhaeuser Magazine, June 1952)

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Drew Engineering Co. (Portland);

The interior Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing paper coming from the air dryer where the sheet of paper is carried around cylindrical driers containing high-pressure steam and the remaining water is driven off in the form of vapor in the air. From the driers the sheet passes through two calendar stacks, each consisting of several steel rolls, riding one on top of the other. The paper passes between them for the purpose of imparting a smooth finish. Further chemical treatment of the surface may also be added on one of these calendar stacks. Ordered by Drew Engineering Company, Portland, Oregon, manufacturers of industrial air systems. (Weyerhaeuser Magazine, November 1952)

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Drew Engineering Co. (Portland); Machinery; Fans (Machinery);

An elevated view of Weyerhaeuser's bleached Kraft mill at Longview, Washington, showing the "wet end" of the paper producing process. Prepared pulp is evenly distributed on a fine, large, bronze wire woven as an endless belt 130 feet long and 216 inches wide and traveling at a speed of several hundred feet a minute. The sheet of paper is actually formed on this wire when the water carrying the pulp fibers drains away and leave a wet mat of felted pulp fibers. By means of a wide, heavy woolen felt traveling continuously through the section of the paper machine known as the press rolls, the wet sheet is carried from the wire, additional water is removed by pressing and a damp sheet is delivered to the next section of the machine known as the drier section. (Weyerhaeuser Magazine, November 1952)

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Machinery;

A man is operating a Thwing-Albert Electro-Hydraulic Tensile Tester and recording the results of the tests at Weyerhaeuser's Kraft plant in Longview, Washington. He is holding a pencil in his right hand as he turns the equipment off and on.

Weyerhaeuser Timber Co. (Longview); Mills--Longview; Lumber industry--Longview; Product inspection--Longview; Equipment;

One man is able to move an enormous roll of paper using an Ederer crane at the Weyerhaeuser Kraft paper mill in Longview, Washington.

Mills--Longview; Weyerhaeuser Timber Co. (Longview); Lumber industry--Longview; Ederer Engineering Co. (Seattle);

St. Paul and Tacoma Lumber Company chip storage plant as viewed on September 3, 1952. Kenworth truck with trailer and two more trailers at loading bays on ground level of building.

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1950-1960; Trucks--Tacoma--1950-1960;

A hanging, mobile sign promoting Douglas Fir Plywood. Ordered by Douglas Fir Plywood Association.

Plywood; Douglas Fir Plywood Association (Tacoma);

A young man is building a cabinet or desk. Legs that look like pipes are sticking straight up as he tightens a screw in one of the supporting members.

Plywood; Woodworking--Tacoma--1950-1960;

A young man is building a cabinet. He is drilling holes in the top, opening corner of the two doors and will be attaching bumpers to keep the doors shut until the owner wants to open them. The legs have been added with a decorative U-shape on the outside of the box portion of the cabinet.

Plywood; Woodworking--Tacoma--1950-1960;

A young man is building a cabinet. He has attached an adjustable clamp to hold a board in place while he adds a screw from the other side to hold it. Small amounts of glue have squeezed out where the plywood and milled wood are attached.

Plywood; Woodworking--Tacoma--1950-1960;

Workmen are moving a section of plywood form into position in preparation to pouring a reinforced cement wall. Carstens Packing Company can be seen over the forms in the distance. Ordered by Douglas Fir Plywood Association.

Douglas Fir Plywood Association (Tacoma); Construction--Tacoma--1940-1950; Reinforced concrete construction--Tacoma--1940-1950;

A man is straddling a crossbeam pointing at a hole in a row of holes below a series of pipes at Rayonier's Grays Harbor mill at Raymond, Washington. There are walls of pipes on three sides of him. The Grays Harbor mill went into operation in 1928 and consisted of both a pulp mill and a paper mill. This mill manufactured chemical cellulose for use in production of viscose rayon and tire cord, and also made the pulp required by its own paper mill producing fine papers for businesses. (Rayonier 1952 Annual Report)

Rayonier, Inc. (Raymond); Lumber industry--Raymond--1950-1960;

A close up of heavy, cast iron machines with stacks manufctured by Western Gear Works, Seattle, at Rayonier's Grays Harbor mill in Raymond, Washington. Rayonier completed many improvements at the Grays Harbor mill in 1952. A large high-pressure boiler was installed to serve the mill's increased capacity. The bleach plant was modernized, with new bleach cells; in making possible a wider range of refining procedures, this broadened the versatility of the mill and opened the way to production of new grades of chemical cellulose. (Rayonier 1952 Annual Report)

Rayonier, Inc. (Raymond); Lumber industry--Raymond--1950-1960;

Two large, heavy cast-iron machines, cooker pots, manufactured by Western Gear Works in Seattle are shown in Rayonier's Grays Harbor mill in Raymond, Washington. Stacks from each of the machines open through the roof of the facility. The company had three mills in the state of Washington at Shelton, Port Angeles and Grays Harbor. There were two more in the Southeast in Florida and Georgia. (Rayonier, Inc., 1951 Annual Report)

Rayonier, Inc. (Raymond); Lumber industry--Raymond--1950-1960;