Industries -- Lumber

Taxonomy

Code

Scope note(s)

Source note(s)

Display note(s)

Hierarchical terms

Industries -- Lumber

Equivalent terms

Industries -- Lumber

Associated terms

Industries -- Lumber

807 Collections results for Industries -- Lumber

692 results directly related Exclude narrower terms

BOLAND-B15352

On July 26, 1926, the "Cacique," an oceangoing cargo ship was pictured at the Tidewater Mill Co. The ship is being loaded with lumber for export. The Tidewater Mill was located on the east side of the Hylebos Waterway, at the end of 11th St. Over 3/4 of its timber was destined for export. In the foreground can be seen several large logs being floated to the mill for processing. The Tidewater was only one of a few mills on the Pacific Coast able to process large logs. (TDL 12/22/1918, pg. B-8) G49.1-086


Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Cargo ships--1920-1930; Shipping--Tacoma--1920-1930;

BOLAND-B15570

Fire damage at Mineral Lake Logging Co. Camp 17 as viewed on September 3, 1926. In the right foreground are scorched tree stumps. G75.1-086 (photograph is marked B15570; however, correct image # should be B15569, per photographer Boland's notes.)


Mineral Lake Logging Co. Camp 17; Fires; Tree stumps; Logs; Lumber industry--Washington--1920-1930;

BOLAND-B15572

Close-up of burnt timber at the Mineral Lake Logging Co.'s Camp 17. Photographer Boland ventured out to the remote logging camp located in north central Lewis County on September 3, 1926, to document the damage that fire had caused to timberlands. Burned sections of cut timber are piled haphazardly on the ground, obscuring many tree stumps.


Mineral Lake Logging Co. Camp 17; Fires; Tree stumps; Logs; Lumber industry--Washington--1920-1930;

BOLAND-B15574

This burned railroad bridge was located near Mineral Lake Logging Co.'s Camp 17 in 1926. The area had suffered fire damage which included part of this railroad bridge constructed out of logs. The bridge curved around a gulch.


Mineral Lake Logging Co. Camp 17; Logging industry--Washington--1920-1930; Fires; Logs; Railroad bridges--Washington--1920-1930;

BOLAND-B15575

This is part of the damage resulting from a fire near the Mineral Lake Logging Co. Camp 17 in 1926. It looks like there was a significant loss of timber, including the blackened logs above. Not shown is a company railroad bridge made of logs which was partially destroyed in the fire.


Mineral Lake Logging Co. Camp 17; Lumber industry--Washington--1920-1930; Logs; Fires;

BOLAND-B15577

This is a view of the devastation caused by fire racing through timbered lands near the Mineral Lake Logging Co. Camp 17 in Lewis County in late summer of 1926. Trees are tossed about like matchsticks and the railroad bridge pictured above may also have been damaged by flames.


Mineral Lake Logging Co. Camp 17; Fires; Lumber industry--Washington--1920-1930;

BOLAND-B15754

Pacific States Lumber Co. plant, Selleck, Washington. This elevated view of the large, sprawling facility was taken on October 4, 1926. Selleck was a mill town in southeast King County formed by the owners of the Pacific States Lumber Co. about 1908 and named after Frank Selleck. It grew into a bustling community of 900 people housed in company buildings and included a hospital, hotel, school, gathering hall and mill buildings. Pacific States Lumber Co. built the world's highest railroad trestle, 204 feet over the Cedar River. The plant, running with modernized equipment, built a good reputation and landed a contract with Tokyo to supply lumber to rebuild the city after the massive earthquake there of 1923. Many Japanese workers and their families were sent to Selleck as laborers and formed a cohesive community of their own. Pacific States Lumber declared bankruptcy in 1939 and the company town's population shrank until its present number of about 90. It was named to the National Register of Historic Places in 1989. (Seattle Times, 7-31-07) G75.1-077


Pacific States Lumber Co. (Selleck); Lumber industry--1920-1930;

BOLAND-B16513

On March 15, 1927, an unidentified logging crew at Camp #1 was taking a lunch break next to giant logs stacked and ready to be transported. Some of the men found that a cut log makes a fairly comfortable perch. Metal lunch pails were scattered around the area and there were clumps of snow visible. TPL-2445; G75.1-102


Loggers; Logs; Lumber industry--1920-1930; Eating & drinking;

BOLAND-B16901

This look at St. Paul & Tacoma Lumber Co.'s sprawling grounds was taken from the Puyallup Bridge on May 30, 1927. Col. Chauncey W. Griggs and associates had established one of Tacoma's first major sawmills located along Commencement Bay in 1888, one year before Washington became a state. Abundant sources of hemlock and Douglas firs were available for logging as St. Paul & Tacoma helped Tacoma become the "Lumber Capital of the World." One of the area's largest employers, St. Paul & Tacoma would eventually merge with St. Regis Paper Co. in 1957. (History of Pierce County, Vol. 1- pg. 10-11-article) TPL-3235; G36.1-134


St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930;

BOLAND-B17026

Elevated 1927 view of what is believed to be the Tidewater Mill Co. facilities located on the east side of the Hylebos Waterway at the end of 11th St. The Hylebos Creek Waterway drawbridge is up to permit ships to pass under. Multiple log dumps are located near the plant and readily accessible. The Tidewater Mill Co. was established in 1918 and had a capacity of 100,000 logs per day. Because it fronted 750 feet of deep water, several ships were able to load cargo at the same time. TPL-6476; G9.1-043


Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Logs;

BOLAND-B17067

Log train headed for St. Paul & Tacoma Lumber Co. yards in July of 1927. Mount Tacoma (Rainier) in background. Many trees near the tracks have already been topped.


Logs; Lumber industry--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Rainier, Mount (Wash.);

BOLAND-B18222

Truss section manufactured by the Ernest Dolge, Inc., lumber company, shown at unidentified construction site in March of 1928. Ernest Dolge, Inc., had a national reputation for producing special "structual" grades of wood. This truss section was strongly bolted together. The Dolge firm was located on the Belt Line at approximately 1800 Taylor Way in the Tideflats, occupying 16 acres on the Hylebos Waterway. Their sawmill produced timbers for boats, beams, and even fire extension ladders that used Douglas fir. The Dolge mill cut 80,000 feet of timber daily and employed 55 men with a yearly payroll of nearly $100,000. G36.1-125 (TDL 4-10-28, Section 3, Industrial section, p. 1, 8-articles)


Ernest Dolge, Inc. (Tacoma); Lumber industry--Tacoma--1920-1930; Trusses--Tacoma;

BOLAND-B18730

On June 13, 1928, two unidentified workers posed with an acetylene torch at St. Paul & Tacoma Lumber Co.'s new mill. The mill in question is believed to be the new sawmill for cutting hemlock logs built in the Tideflats on the site of the old Foundation shipyards near the Union Bag & Paper Corporation pulp mill still under construction. The sawmill would begin operations on June 18th. G35.1-082 (TNT 6-15-28, p. 10-article)


Welding--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Sawmills--Tacoma--1920-1930;

BOLAND-B18734

Unidentified machinery at St. Paul & Tacoma Lumber Co.'s new mill, as photographed on June 12, 1928. Established in 1888, the company would merge with St. Regis Paper in 1957.


Machinery; St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930;

BOLAND-B18747

Interior of new St. Paul & Tacoma Lumber Co. mill as viewed on June 15, 1928. This is believed to be the new sawmill used to cut hemlock logs built in the Tideflats north of E. 11th St., part of a joint venture between the Union Bag & Paper Corporation (N.Y.) and St. Paul & Tacoma Lumber. The mill, opening on June 18, 1928, was built on the site of the old Foundation shipyards. It contained modern new machinery including a new Yates planer, 72 x 14-inch edger, 48 x 16-inch Diamond gangsaw, 9-foot Diamond band saw, 7-foot resaw and two mechanical saw trimmers. In addition, the mill had a new hammerhead crane which was capable of lifting 7 1/2 tons. G36.1-150 (TNT 6-15-28, p. 10-article)


St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Sawmills--Tacoma--1920-1930;

BOLAND-B18783

Defiance Lumber Co. plant and stacks, as photographed on June 19, 1928, for a court case. Photograph also includes hill and tracks. The court case possibly involved a $10,000 claim in superior court whereby an individual charged that smoke and refuse from the lumber company's stacks was so heavy that it was a nuisance when the wind blew from the north or northeast. G36.1-117


Defiance Lumber Co. (Tacoma); Smokestacks--Tacoma--1920-1930;

BOLAND-B18784

Defiance Lumber Co. facilities, including smokestack and railroad tracks, and neighboring hillside as viewed on June 19, 1928. This scene was photographed for a court case that may have involved pollution claims against the company. G36.1-056 (for another view of smokestack see Boland photograph B18783)


Defiance Lumber Co. (Tacoma); Smokestacks--Tacoma--1920-1930; Railroad tracks--Tacoma--1920-1930;

BOLAND-B20498

This photograph of trains of logs on and along Northern Pacific Railway tracks with Northern Pacific boxcars adjacent to the logs was taken in March of 1929. It was later used in a News Tribune article dated October 20, 1930 to help bolster Tacoma's claim to be "the lumber capital of the world." Great trains of logs like these were brought to Tacoma's mills for cutting into lumber before being sent out to the world. More than 80 Tacoma mills converted lumber into finished products. 21 local furniture-making factories used Tacoma lumber to built tables, chairs and all manner of wood products. Tacoma had led the nation in lumber production since 1905. TPL-1542; G44.1-114 (TNT 10-20-30, 4-B)


Logs; Shipping--Tacoma--1920-1930; Northern Pacific Railway Co. (Tacoma); Railroad tracks--Tacoma--1920-1930; Lumber industry--Tacoma--1920-1930;

BOLAND-B2221

Log on shute. This log on a shute at an unidentified sawmill was photographed in mid-August of 1919. TPL-8085; G36.1-015


Logs;

BOLAND-B2235

Side view of logging equipment on wheels belonging to the Wilson Logging Co. Photograph taken at unidentified location on August 23, 1919. TPL-9852 ; G36.1-032


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B2236

In August of 1919, a steam donkey mounted on a sled was photographed loaded on a truck for ease in transport to a logging site. Only the sled itself, built from huge logs, is clearly visible. The cable and winch on the donkey could be used to help load and unload it from the truck. This photograph was ordered by the Wilson Logging Co. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-082


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B2240

An early logging truck, used by Wilson Logging Co. to bring in logs, was photographed in August of 1919. The early motor trucks offered an economical alternative to railway logging. Despite the cost of constructing roads, the trucks were a cheaper, faster and more practical way to move the logs. They were a common sight by the 1920s. They usually were underpowered, had an open cab and hard rubber tires, but they could go places that locomotives could not. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-032 (website for the Museum at Campbell River www.crmuseum.ca\exhibits)


Lumber industry--1910-1920; Wilson Logging Co.;

BOLAND-B22418

Nine unidentified men were photographed in front of the large St. Paul & Tacoma Lumber Co. store on April 17, 1930. St. Paul & Tacoma, established in 1888, was one of Tacoma's pioneer industries. Its lumber concerns would provide employment for hundreds of local residents. It would merge with St. Regis Paper Co. in 1957.


St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1930-1940;

BOLAND-B2242

Although motorized logging trucks were becoming more common in the lumber industry, horses were still being used in August of 1919. A pair of horses are pictured above at an unidentified sawmill waiting patiently as planks are being loaded onto an open cart. Photograph ordered by the Wilson Logging Co. TPL-6636 G36.1-052


Logging industry--1910-1920; Wilson Logging Co.;

BOLAND-B23070

It is hard to tell in this rather faded picture taken on a foggy day in October of 1930 but it appears that water is spurting from what may be the hold of a cargo ship. Three unidentified men are observing the scene. Photograph ordered by St. Paul & Tacoma Lumber Co. G36.1-158


St. Paul & Tacoma Lumber Co. (Tacoma);

BOLAND-B23071

Two unidentified men are looking down at stacks of lumber piled on St. Paul & Tacoma Lumber Co. property in October of 1930. A large crane can be seen dimly in the background. G36.1-156


St. Paul & Tacoma Lumber Co. (Tacoma); Hoisting machinery;

BOLAND-B2522

Extended view of St. Paul & Tacoma Lumber Co. planing mill and "monorail" as pictured in November of 1919. This may be the aerial tramway constructed to transport lumber from dry kilns to various other parts of the plant, replacing the old horse-and-truck system. St. Paul & Tacoma were putting in improvements to their sawmill on the Tideflats totaling nearly half-a-million dollars. Two new dry kilns were being built as well as an aerial tramway. The improvements were expected to reduce the cost of plant operation. St. Paul & Tacoma employed about 800 men at the time including a considerable night shift. G36.1-155 (T.Times 8-22-19, p. 12-article; TDL 7-19-20, p. 6-article)


Lumber industry--Tacoma--1910-1920; St. Paul & Tacoma Lumber Co. (Tacoma);

BOLAND-B2540

St. Paul & Tacoma Lumber Co. yard as photographed on November 24, 1919. As reported in the August 22, 1919, Tacoma Times newspaper, St. Paul & Tacoma Lumber was spending nearly $500,000 in improvements to its sawmill on the Tideflats. An aerial tramway was constructed to carry lumber from dry kilns to other parts of the plant. This would facilitate handling of lumber in the mill. The company was established in 1888 and provided steady employment for many residents for decades. It would merge with St. Regis Paper Co. in 1957. G36.1-083 (T.Times 8-22-1919, p. 12-article)


St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1910-1920;

BOLAND-B25776

Three unidentified men posed at a logging site in Mineral, Washington, on the first of March, 1936. The hillside beyond the men is strewn with fallen timber. The men are sitting and leaning against a much bigger log. G75.1-098


Lumber industry--Mineral; Logs; Woodcutting--Mineral;

BOLAND-B25788

Two photographs were artfully combined in this March, 1936, work by photographer Marvin Boland. Large logs are pictured aboard an open railroad car on tracks while in the background are three unidentified men posed at the base of an enormous old-growth tree. TPL-2117; G75.1-081


Logs; Lumber industry--1930-1940; Trees;

Results 241 to 270 of 807