The George R. Marvin Co. was a steel fabrication plant located on Taylor Way in the Tideflats. Besides manufacturing cranes and other hoists, they also were involved in fabricated steel products. A model in an October 4, 1957, photograph is examining a piece of machinery manufactured by the Marvin Co. The exact use of the product is not known; it does appear to be solidly constructed and capable of containing either solids or liquids. What appears to be an Air Force fuel tank is in the background of the photograph. Photograph ordered by the George R. Marvin Co.

George R. Marvin Co. (Tacoma); Steel industry--Tacoma--1950-1960;

An employee of Ace Furnace & Steel Co. leans one arm against a massive steel jet propulsion fuel storage tank on company property on August 5, 1958. He appears diminutive when contrasted with the 10.6 foot diameter tank. The gas tank measures 77.5 feet in length. Ace Furnace produced steel storage tanks for oil, gasoline and water, stacks, marquees, canopies, steel heating and ventilation systems, boilers, furnaces, and marine sheet metal. The company's major output now are tanks of all sizes, approximately 400-800 tanks per month. The huge tanks pictured above were just built for McChord Air Force Base. It is estimated that these were the largest shop fabricated steel tanks ever built in Tacoma. The Northern Pacific cars in the background would make transportation of these heavy steel products easier and more efficient. Photograph ordered by Ace Furnace & Steel Co. (TNT 9-1-58, C-7)

Ace Furnace & Steel Co. (Tacoma); Steel industry--Tacoma; Storage tanks--Tacoma; Railroad freight cars--Tacoma--1950-1960;

Dirt pours out of the opened clam shovel which is suspended by thin cables in this July 31, 1962, photograph taken at Graystone of Tacoma. The shovel is believed to have been manufactured by the Star Iron & Steel Co. of Tacoma. Star Iron built cranes and specialized equipment to handle everything from salmon to missiles; their products were used in WWll to help clear the Pearl Harbor disaster. Its crane capacities ranged to more than 350 tons. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

Crane under construction at Star Iron & Steel Co. The Star Iron & Steel plant was located in new quarters at 326 Alexander Ave. in the Port Industrial area. Custom designing and manufacturing special equipment, cranes, and hoists was its primary business. During July, 1964, gantry cranes weighing 50 and 350 tons were being manufactured by Star Iron & Steel. Gantry cranes were similar to overhead bridge cranes except that the bridge for carrying the trolly or trolleys was rigidly supported on two or more legs running on fixed rails or other runway. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hoisting machinery;

Interior of Star Iron & Steel Co. plant on Alexander Ave. in the Port Industrial area. this is a general view of the machine shop area which has over 15,000 square feet of well lighted, heated space. Founded in 1908, Star Iron & Steel was one of the oldest steel fabricating companies in the Pacific Northwest. Cranes, hoists and special machinery were custom designed and manufactured. In July, 1964, Star Iron & Steel were busy constructing 50 and 350 ton gantry cranes. Gantry cranes are similar to overhead cranes with the same strength and durability but are raised above the floor by support legs mounted on the end trucks. There was ample space in the machine shop area also for assembling crane trolleys, hoists, drive trucks and other mechanical equipment. TPL-9626 (SIS booklet, c. 1965)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hoisting machinery;

An enormous Brute Crane manufactured by the Star Iron & Steel Co. of Tacoma balances both men on board and heavy loads of plywood in this customer print copied in September, 1963. The presence of other piles of plywood near the building under construction seem to indicate that the Brute Crane has already been put to good use. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Plywood; Building construction;

Unseen operators in the small George Scofield Co. crane house handle the controls of a large Brute Crane in this March 28, 1930, photograph originally taken by Marvin Boland. Piles of what appear to be pipe segments are in the foreground. A Union Pacific sign is on top of a building near the waterway. Brute cranes were manufactured by Star Iron & Steel Co. of Tacoma. Photograph ordered by Star Iron & Steel Co; customer print copied on September 17, 1963.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

Interior of new Star Iron & Steel Co. plant on Alexander Avenue. Richards Studio notes indicate these are "fixed wheel gates" in process of being assembled. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970;

Additional view of Star Iron & Steel Co.'s "Porta Tower" in operation at the Cotten Bros. logging site located in Packwood. These towers could be moved from logging camps to other logging camps with relative ease with transport by heavy-duty trucks. "Porta Towers" were mobile steel spur trees. See A139670-4 for another view of "Porta Tower" in use. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel; Hoisting machinery; Logs;

Another view of the Brute Crane operated by the George Scofield Co. taken on March 28. 1930, by Marvin Boland; see A139500-30 for additional shot. The crane is apparently in the process of scooping up material. Brute Cranes were manufactured by Star Iron & Steel Co. of Tacoma. Photograph ordered by Star Iron & Steel Co.; copy made of customer print on September 17, 1963.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

A Brute Crane manufactured by the Star Iron & Steel Co. of Tacoma is in the process of hoisting lumber at the Seattle Export Lumber Co. There are piles of lumber on both sides of the crane. Date of original photograph is unknown; copy made on September 17, 1963.

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Lumber; Seattle Export Lumber Co.;

Porta Tower in operation at the Cotten Bros. logging site in Packwood on October 23, 1963. Used as portable steel spur trees, "Porta Towers" were manufactured by Star Iron & Steel Co. of Tacoma for use in the logging industry. Star Iron & Steel was well known for their cranes and specialized equipment which included hydraulic presses, log barkers, radio and television towers, and chip handling buckets. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel; Hoisting machinery; Logs;

Bushnell Co. of Jacksonville, Florida, supplied crane service to this tower under construction at an unspecified harbor in this undated photograph. Customer print was copied on September 17, 1963, for Star Iron & Steel Co. of Tacoma.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

A "Porta Tower" built by Star Iron & Steel extends at a 45 degree angle in a September 19, 1963, photograph taken outside company headquarters. Porta Towers were described as mobile steel spur trees that replaced spar trees in logging operations. A "Porta Tower" could be erected and ready to work in two hours, much less time than it would take to rig a spar tree. Photograph ordered by Star Iron & Steel. (TNT 10-13-63, B-9)

Star Iron & Steel Co. (Tacoma); Steel;

Built by Star Iron & Steel, an imposing 90 foot "Porta Tower" is parked outside of company headquarters on September 19, 1963. Star Iron & Steel was well known for its crane and tower construction. The "Porta Towers" would be utilized as mobile steel spur trees. "Porta Towers" were self-erecting and ready to work in two hours. Star Iron & Steel had been founded in 1908 at 435 E. 11th St. It moved to its new quarters in the Port Industrial area in 1963. Photograph ordered by Star Iron & Steel. (TNT 7-24-63, A-11, TNT 10-13-63, B-9)

Star Iron & Steel Co. (Tacoma); Steel;

Architectural office of Star Iron & Steel Co. Men are shown working at desks with architectural plans spread out. One large table in the foreground has an architectural blueprint held down by a book of standards and notepad. Star Iron's new one-story office building was separated from the 100,000 square foot plant to reduce noice level. Star Iron had been in the Tacoma area for decades and was one of the oldest steel fabricating firms in the Pacific Northwest. They built cranes and specialized equipment to handle everything from salmon to missiles. Crane capacities ranged to more than 350 tons. Besides cranes, the company made radio, tv, and power transmission towers, steel for buildings and bridges, and equipment for the lumber industry including log barkers, hydraulic presses, power operated grapples and chip handling buckets. Photograph ordered by Bethlehem Pacific Coast Steel. (TNT 9-1-61, B-10, TNT 7-24-63, A-11)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Offices--Tacoma--1960-1970; Blueprints; Books;

Close-up of the bridge end trucks of the 275-ton powerhouse crane built by the Star Iron & Steel Co. of Tacoma for the Barkley Power Plant on Kentucky's Cumberland River. This July 15, 1963 photograph is a cropped view of A-138737-3, and was taken for a government report.

Star Iron & Steel Co. (Tacoma);

Interior of Star Iron & Steel plant. Elevated view on May 1, 1963, of interior of the Star Iron & Steel plant shows fabricated steel products ready to be assembled. Star Iron, well-known for crane construction, also made towers, hydraulic presses, power operated grapples, and fabricated steel for buildings, bridges and grandstands. They had built a larger plant on Alexander Avenue in 1963.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970;

Photographs were requested for a government report concerning the construction of a 275-ton powerhouse crane by Star Iron & Steel Co. of Tacoma. The crane was ordered for the Barkley power plant on Kentucky's Cumberland River. This July 15, 1963, photograph shows the main hoist blocks and auxiliary hoist blocks.

Star Iron & Steel Co. (Tacoma);

Exterior - Star Iron & Steel. Star Iron & Steel Co. would move into new quarters in the Port Industrial area in 1963. Bldg. 407 shown above in this April 9, 1963, photograph, held the company's offices, which were in a separate building from the large plant. Owned by Edward N. Allen, Star Iron was one of the oldest steel fabricating companies in the Pacific Northwest. They specialized in building cranes, hoists, towers, and equipment for the lumber industry. During WWII, they made some of the heaviest and largest cranes for the U.S. Navy. Photograph ordered by Bethlehem Pacific Coast Steel. (TNT 7-24-63, A-11)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Facades--Tacoma--1960-1970; Signs (Notices);

Part of a series of photographs of a 275-ton powerhouse crane constructed by Star Iron & Steel Co. of Tacoma for the Barkley Power Plant on the Cumberland River. This July 15, 1963, view is described as the general arrangement and trolley with main and auxiliary hoists.

Star Iron & Steel Co. (Tacoma);

Star Iron & Steel - complete engineering, structural shop and machine shop facilities. Notes from the Richards Studio indicate that their photographer took this April 13, 1963, view of the new Star Iron & Steel Co. facilities from one of the company's own overhead cranes. Several cranes and steel structures are visible as well as the waterways separating the industrial Tideflats area from downtown businesses. Star Iron had moved from its longtime E. 11th St. location to the Port Industrial area that year. The new plant was ideally located for shipment of its products by truck, rail or water. Employment at the plant had apparently more than tripled from 63 to 250 since the move to a new location. It had cost $500,000 to double the plant capacity. Star Iron & Steel was one of the oldest steel fabricating businesses in the Pacific Northwest, having been founded in 1908. It specialized in custom design and manufacture of cranes, hoists, and special machinery. Star Iron's products were shipped for installation throughout the United States and also to foreign countries. There was a total of 97,000 square feet under roof currently being used with another 54,000 square feet available for future expansion. (TNT 7-24-63, A-11; SIS booklet, c. 1965)

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970; Hoisting machinery;

Pencil in hand, an architect at Star Iron & Steel Co. surveys a model of a steel sign and girts on April 9, 1963. His glasses rest on a large sheet holding design data. Besides being well-known for their hoisting machinery, Star Iron also built towers, fabricated structural steel for buildings, bridges, and grandstands, and equipment for the lumber industry. They moved from their longtime location on E. 11th St. to Alexander Avenue in the Port Industrial area in 1963. Photograph ordered by Bethlehem Pacific Coast Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Architectural models; Blueprints; Eyeglasses;

Overhead view of trolley assembly at Star Iron & Steel. Trolley No. 1 and No. 2 are being assembled for the Webbers Fall Lock & Dam Crane on February 28, 1969. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

Conveyor system pictured at Port of Tacoma in January, 1967. Built by Star Iron & Steel of Tacoma, the elevated conveyor equipment is set up to load and unload materials to the domed storage tank in the background. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Conveying systems--Tacoma--1960-1970; Storage tanks--Tacoma;

Fabrication and boring mill at Star Iron & Steel. Two men shown at work at Star Iron & Steel, 326 Alexander Ave. in the Port Industrial area, on August 8, 1966. They may have been working on "B" and "A" cranes. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970; Hoisting machinery;

Star Iron & Steel operations. An unidentified Star Iron & Steel Co. employee at work in the company's machine shop in January of 1970. He wears thick safety gloves, sturdy boots and protective outer clothing. He has one hand on the control box and the other on a long piece of metal. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Machinery;

Star Iron & Steel. On January 14, 1970, a series of photographs were taken regarding plant operations at Star Iron & Steel, 326 Alexander Ave. This is believed to be the building housing the aluminum fabrication unit. The interior looks very crowded with a variety of aluminum products. Founded in 1908, Star Iron & Steel was one of the oldest steel fabrication plants in the Pacific Northwest. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Industrial facilities--1970-1980; Steel industry--Tacoma--1970-1980;

Star Iron & Steel. This is believed to be the aluminum fabrication plant at Star Iron & Steel in early 1970. The interior appears crowded with stacks of aluminum with metal shavings and piles of debris in the photograph's foreground. Star Iron & Steel, a long established Tacoma firm, had moved to more spacious quarters in the Port Industrial area in 1963. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Industrial facilities--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980;

Scenes from Fick Foundry. Three employees of Fick Foundry, 1005 East D St., are properly wearing safety goggles to prevent eye injuries while they are in the process of pouring molten metal to form castings. Two of the men are tipping a bucket of liquid while using a metal grasping device while the third nudges the molten metal out with a thin rod. Photograph ordered by Winston Fournier & Associates, Dallas.

Fick Foundry Co. (Tacoma); Foundries--Tacoma--1960-1970; Founding--Tacoma--1960-1970;