Exterior of new aluminum rod mill at Kaiser Aluminum. Kaiser gradually phased in their new aluminum rod mill with its first rod being formed in a test run in December, 1968. The completely automated mill would produce rod at a rate of 1,800 feet a minute. Kaiser would produce the first semi-fabricated aluminum product for Tacoma. Photograph ordered by Kaiser Engineers, Inc. (TNT 12-8-68, A-7)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

Aerial of Kaiser Aluminum plant as viewed on June 10, 1974. Smoke drifts from the 500-foot stack near the aluminum rod mill. 32 years later in July of 2006, the smokestack was demolished in front of hundreds of fascinated spectators. Color photograph ordered by Kaiser Aluminum.

Aerial photographs; Kaiser Aluminum & Chemical Corp. (Tacoma); Industrial facilities--Tacoma--1970-1980; Aluminum industry--Tacoma--1970-1980;

ca. 1973. Standing over a hundred feet tall is this unidentified supporting structure at Kaiser Aluminum's Tideflats plant. Its size is apparent compared to the man standing at the foot of one of the supports. Even the truck nearby appears miniscule. Photograph ordered on December 19, 1973, by Puget Sound Fabricators, Seattle.

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1970-1980;

ca. 1974. This view of the Kaiser Aluminum plant is a cropped version of D165187, image A. It was taken circa 1974 with the focus on the 500-foot stack near right center. The stack was built in 1968, the same year Kaiser's new aluminum rod mill commenced operation.

Aerial views; Kaiser Aluminum & Chemical Corp. (Tacoma); Industrial facilities--Tacoma--1970-1980; Aluminum industry--Tacoma--1970-1980; Smokestacks--Tacoma;

New aluminum rod mill under construction. Kaiser Aluminum & Chemical Corp. was building a new rod mill in 1968; it would be ready for operation in December of that year. Once fully functional, the completely automated mill would produce rod at a rate of 1,800 feet per minute. Kaiser was undergoing a period of expansion where a new 500-foot stack and the rod mill were built, a second alumina dome with 100,000-ton capacity would be completed in 1969. Photograph ordered by Kaiser Engineers. (TNT 12-13-68, C-18)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

New aluminum rod mill under construction. Construction progresses on the new Kaiser Aluminum's rod mill on 3400 Taylor Way in early November, 1968. Covers have now been placed on the two small dome-containers. It is possible that these containers would hold the molten aluminum that would be used to manufacture the 3/8th-inch rods. Earlier photograph taken on October 18, D154922, Image 4, shows them uncovered. The mill would form its first rod in a test run on December 12, 1968. Photograph ordered by Kaiser Engineers. (TNT 12-13-68, C-18)

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970;

1969 Richards stock footage. Autumn view of Kaiser Aluminum plant in tideflats taken by air in 1969. Located on Taylor Way approximately five miles north of downtown Tacoma, the large Kaiser facility had expanded in late 1968 to manufacture aluminum rods for shipment to California for finishing into electrical conductors. 1969 would see further expansion as its second alumina dome with a 100,000 ton capacity was completed on Pier 7.

Aerial views; Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970;

Kaiser Aluminum plant aerials. Kaiser Aluminum, located at 3400 Taylor Way in the Tideflats, had resumed production in 1964 after being closed for six years. They were still expanding in 1968 when the above aerial photograph was taken. Hylebos Waterway and Northeast Tacoma in background. Photograph ordered by Kaiser Engineers. TPL-4741

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Aerial views; Hylebos Waterway (Tacoma);

Closer aerial view of Kaiser's Tacoma plant located at 3400 Taylor Way in the industrial Tideflats. Taken on October 30, 1968, photograph emphasizes the height of what is believed to be the 500-foot stack recently constructed. Hylebos Waterway in background. Photograph ordered by Kaiser Engineers. TPL-6580

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Aerial views; Hylebos Waterway (Tacoma);

Smoke pours from the 500-foot smokestack at the Kaiser Aluminum plant, 3400 Taylor Way, on October 12, 1972. The company had undergone expansion in the late 1960s and built a new aluminum rod mill and second aluminum dome in addition to the smokestack. Kaiser Aluminum would permanently close in 2002 and the smokestack demolished four years later.

Aerial views; Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1970-1980; Smokestacks--Tacoma;

In order to meet pollution control standards, air pollution controls called "dry scrubbers" were installed in 1974 at Kaiser Aluminum's Tideflats plant to remove material from plant emissions. The $12,000,000 system was expected to be completed in September of 1974. Color view of new installation taken on September 20, 1974, on behalf of Kaiser Aluminum. (TNT 5-26-74, D-10- article on "dry scrubbers")

Air pollution--Tacoma--1970-1980; Kaiser Aluminum & Chemical Corp. (Tacoma); Industrial facilities--Tacoma--1970-1980; Aluminum industry--Tacoma--1970-1980;

United Steel Workers union was formed with the help of the United Mine Workers. The Mine Workers felt the Steel Workers needed guidance and helped them organize a committee. View of Permanente Metals employees washing their hands after a hard day at work, photo ordered by United Steel Workers of America.

Laborers--Tacoma; Washstands--Tacoma; United Steel Workers of America Union Local No. 2626 (Tacoma); Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Labor unions--Tacoma; Permanente Metals Corp. (Tacoma)--Employees;

Permanente. Two men are having fun with a load of alumina, a fine white powder that is refined from alumium-bearing ore, bauxite. Bauxite was mined in South America, refined, using the Bayer process, in Baton Bouge and shipped by rail to the Pacific Northwest where it was converted into primary aluminum. Four pounds of bauxite were required to obtain two pounds of alumina shich yields one pound of aluminum. As of September 1948 nearly 500 boxcar loads of alumina per month were brought to Tacoma and Mead aluminum reduction plants, thereby becoming one of the largest users of boxcars in the Northwest.(Permanente Metals Corporation 1947-1948 Annual Report; T.Times, 9/6/1948, p.12)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Aluminum; Minerals--Tacoma; Laborers--Tacoma--1940-1950;

Girls from Catholic College visiting Permanente plant, Bill Gorman. Several students from the freshman chemistry class at Tacoma Catholic College watch as the white, powdery alumina is added to a reduction pot in preparation to being melted and poured into molds to form pig aluminum. This was the first step in creating the later stages of aluminum that would be used in making Kaiser aluminum products from roofing and siding to airplane parts, ice cube trays and pots and pans. (TNT, 3/1948)

Permanente Metals Corp. (Tacoma); Aluminum industry--Tacoma--1940-1950; Foundries--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Students--Tacoma--1940-1950;

From the evidence provided by this photograph, the security guards at the Kaiser aluminum plant on the Tideflats had a pretty easy life in September of 1947. But one has to wonder what the corporate headquarters for Permanente Metals Corporation thought about the security at their Tacoma plant when they saw this carefully posed picture. The Tacoma plant was only one year old, having been taken over by Permanente Metals Corp. from the Olin Corp. in 1946. (Permanente Metals, Mr. Love) TPL-9603

Permanente Metals Corp. (Tacoma)--Employees; Guards--Tacoma--1940-1950; Private police--Tacoma--1940-1950; Gatehouses--Tacoma--1940-1950; Factories--Tacoma--1940-1950; Aluminum industry--Tacoma--1940-1950;

The Tacoma plant of the Permanente Metals Corporation accomplished its first casting of "pigs" from molten metal in November of 1947. Plant employees in the pot room were photographed getting the newly molten metal in the ladle ready to pour into a mold to form pigs. Cast pigs could weigh from fifty and one thousand pounds depending on size and composition. Once cooled, the pigs were stacked on pallets and transported to the rolling mill at Trentwood, located near Spokane, Washington. The pigs from the Mead and Tacoma plant would later be re-melted in furnaces where other metallic elements were added to form standard alloys. Tacoma's Permanente plant produced aluminum in commercial quantities for Henry J. Kaiser's industrial operations. (PMC Annual Report, 1947-1948; T.Times 11-19-47, p. 18-alt. photograph & article).

Aluminum industry--Tacoma--1940-1950; Aluminum; Industrial facilities--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma)--Employees;

Permanente would be producing 42,000,000 pounds of pure aluminum per year at the Tacoma plant. Tacoma's output will supplement the Mead Reduction plant near Spokane, Washington. Permanente Metals delayed their plant opening, until the newest generator of the Grand Coulee power plant was in operation. View of Permanente technicians checking equipment (T. Times, 10/31/47, p. 1).

Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Control rooms--Tacoma; Permanente Metals Corp. (Tacoma)--Employees;

Permanente Metals Tacoma plant was a modern aluminum reduction plant. The plant had two pot lines that produced about 42,000,000 pounds of aluminum per year. This plant was located in the Tide Flats area and was spread over 129 acres, the plant went into official production on October 31, 1947. View of Permanente employee using the time clock (T. Times, 10/31/47, p. 1).

Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Time; Time clocks; Permanente Metals Corp. (Tacoma)--Employees;

Publicity shots at Permanente Metals, Bill Gorman. Two of the staff at Permanente are checking the pressure through a hose and narrow pipe on the arm of the young man in a chemical lab. Glass containers and tubing are set up on the counter in front of them. They both wear aprons with bibs. The woman has her goggles lifted up onto her forehead. TPL-4555

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Employees--Tacoma--1940-1950; Laboratories--Tacoma--1940-1950;

Publicity shots at Permanente Metals, Bill Gorman. Two workmen from the Permanente plant stand side-by-side, the older man has his arm around the shoulder of a younger man. The older man is wearing coveralls, a heavy shirt and a hat. He has goggles hanging around his neck. The other, younger man is wearing a jacket, a plaid shirt, and a hat. They are both smiling. The plant facilities are seen in the background. TPL-4555

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Employees--Tacoma--1940-1950;

Permanente Metals would produce 40 million pounds of aluminum per year. The company sells a million and a half pounds of finished aluminum sheets per year o many U. S. firms. Permanente Metals had their headquarters in Oakland, California, Henry Kaiser was the President. View of laborers stacking up pigs, alloyed metals that have been cast into individual ignots (T. Times, 2/12/47, p. 5).

Machinery; Equipment; Laborers--Tacoma; Aluminum industry--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma);

Permanente Metals in Tacoma contained 240 reduction pots that produced an annual rate of 41,500,000 pounds of aluminum. The plant would employ pot room operators, crane operators, carpenters, machinists, electricians and many other maintenance men. Hoods enclosed the reduction pots, they collected dust and fumes which were then cleaned by a "scrubbing" system before being released to the outside atmosphere. The Tacoma plant was the first to employ this type of system. Exterior view of plant showing the alumina storage towers. (T. Times, 2/12/47, p. 5)..

Storage tanks--Tacoma; Aluminum industry--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma);

Permanente Metals approaching the end of their first year of operations in Tacoma, which proved to be quite successful. Permanente's new research lab will be looking for ways to improve uses of this lightweight metal, increase aluminum production and the development of new products and product applications. Exterior view of Permanente Metals Corporation, laborer in foreground is hauling aluminum pigs using a forklift, workmen are walking by in background (T. Times, 8/23/48, p. 5)

Industrial facilities--Tacoma; Laborers--Tacoma; Research facilities--Tacoma; Hoisting machinery; Aluminum industry--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma);

In September of 1948 an unidentified Lincoln High School student watched from a safe distance as Bill Laster, a trimmerman at the Permanente Metals Corp., checked up on a gas hole in one of the aluminum pots at the Tacoma works. As a supplier of primary "pig" aluminum, the Kaiser reduction plant on Taylor Way occupied an important position in the integrated operation of the Permanente Metals Corp. Much of the metal processed at the Tacoma plant ended up in the hands of local manufacturers. The company stut down their plant in Tacoma in June of 2000 due in part to the rapidly rising cost of electricity. (TNT 2/15/1949 p.A-4)(National Youth Week publicity at Permanente, Permanente Metals, Bill Gorman) TPL-8380

Laborers--Tacoma--1940-1950; Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Students--Tacoma--1940-1950; Laster, William J.;

On October 27, 1948, Permanente Metal Corporation employees, left to right, Charlotte Thorestad, C.P. (Pat) Love (plant manager) and Darlene O'Brien sat surrounded by a sea of iced cupcakes marked with a "P" and decorated with a single candle. Permanente's aluminum reduction plant at 2400 Taylor Way was celebrating its first year of production of Kaiser Aluminum with a "Family Day" Open House. Employees along with 1,500 friends, families and relations were the guests of management. They observed the step by step process of making aluminum and ate hot dogs cooked on a 500 lb. "pig" of aluminum, sandwiches, cupcakes and punch. The plant had been previously operated during World War II by the Olin Corporation. After its purchase by Kaiser, it became one of six aluminum plants operated by the company. The other plants were located at Mead and Trentwood Washington (near Spokane), Baton Rouge La., Newark Ohio and San Jose Ca. The Tacoma plant was permanently closed in 2002 and later demolished. (TNT 10/28/1948, p.1)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Employees--Tacoma--1940-1950; Baked products--Tacoma--1940-1950; Love, Charles P.; O'Brien, Darlene; Thorestad, Charlotte; Anniversaries--Tacoma--1940-1950;

Permanente's First Anniversary, Permanente Metals, Bill Gorman. A crowd of employees and their families watch James Condos, a caster at the plant, demonstrate pouring molten aluminum from a large ladle into a form for pig aluminum. More than 1,500 visitors crowded into the plant October 27, 1948, to celebrate the plant's first year of operation under Kaiser. They saw the step-by-step processes that went into making aluminum by touring the potrooms, rectifier stations, the machine shop, blacksmith shop and the casting room. (T.Times, 10/18, 1948, -.1)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Families--Tacoma--1940-1950; Anniversaries--Tacoma--1940-1950;

Permanente Metals had just celebrated a one year anniversary, the company had been operating in Tacoma since late 1947. Permanente was producing Kaiser aluminum, which was being used throughout the United States. View of unidentified Permanente Metals workers using a crust breaker machine, molten aluminum or alumina is the white powdery substance in the machinery. Alumina powder is reduced in huge furnaces or "pots" to obtain high purity aluminum.

Aluminum; Metalwork--Tacoma; Laborers--Tacoma; Aluminum industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Machinery; Equipment; Permanente Metals Corp. (Tacoma);

A view across the Tideflats and adjacent pond shows the expanded Kaiser Aluminum plant in November, 1957. Built originally for Olin Corporation in 1942, and purchased by Kaiser four years later, heavy demand for aluminum products post-war made expansion of the plant necessary. Kaiser spent nearly three million dollars in 1952 to improve their Tacoma plant facilities which led to a large increase in aluminum production. Photograph ordered by Kaiser Aluminum.

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960;

Tacoma works rectifier station addition, Kaiser Aluminum. Other side of building with plant and yard on right, Dodge truck lower left. The plant underwent an expansion and modernization program, beginning in 1952, to increase production. Construction in the expansion program included an extension to the rectifier station building. The rectifier station is where power is converted from alternating to direct current.

Kaiser Aluminum & Chemical Corp. (Tacoma); Aluminum industry--Tacoma--1950-1960; Dodge trucks; Trucks--Tacoma--1950-1960;