In August of 1919, a steam donkey mounted on a sled was photographed loaded on a truck for ease in transport to a logging site. Only the sled itself, built from huge logs, is clearly visible. The cable and winch on the donkey could be used to help load and unload it from the truck. This photograph was ordered by the Wilson Logging Co. There was a C.C. (Chan) Wilson Lumber Co. located in Hudson, just west of Rainier, Oregon. G75.1-082

Lumber industry--1910-1920; Wilson Logging Co.;

Extended view of St. Paul & Tacoma Lumber Co. planing mill and "monorail" as pictured in November of 1919. This may be the aerial tramway constructed to transport lumber from dry kilns to various other parts of the plant, replacing the old horse-and-truck system. St. Paul & Tacoma were putting in improvements to their sawmill on the Tideflats totaling nearly half-a-million dollars. Two new dry kilns were being built as well as an aerial tramway. The improvements were expected to reduce the cost of plant operation. St. Paul & Tacoma employed about 800 men at the time including a considerable night shift. G36.1-155 (T.Times 8-22-19, p. 12-article; TDL 7-19-20, p. 6-article)

Lumber industry--Tacoma--1910-1920; St. Paul & Tacoma Lumber Co. (Tacoma);

St. Paul & Tacoma Lumber Co. yard as photographed on November 24, 1919. As reported in the August 22, 1919, Tacoma Times newspaper, St. Paul & Tacoma Lumber was spending nearly $500,000 in improvements to its sawmill on the Tideflats. An aerial tramway was constructed to carry lumber from dry kilns to other parts of the plant. This would facilitate handling of lumber in the mill. The company was established in 1888 and provided steady employment for many residents for decades. It would merge with St. Regis Paper Co. in 1957. G36.1-083 (T.Times 8-22-1919, p. 12-article)

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1910-1920;

The Columbia Brewing Company was started in 1900 by three men with a capitalization of $50,000. William Kiltz was sales manager and Emile Kliese was owner, president and brewmaster. Their facilities, typical of the era, were primitive, but they were determined to make the finest beer possible. During the early stages of beer making malted barley was milled and the malt grain was mixed with pure water in a large wooden tub called a "mash tun". This "malt mash" was stired by hand with a long wooden paddle and then channeled or piped into large copper brew kettles where the "wort" was boiled with hops. This view shows the laboratory and mixing room in the bottling department of Columbia Brewing Company. The brewery was located in a newly built facility at 2120-32 South C Street. Copy ordered by Columbia Breweries, Inc., in 1951. (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4391) Another copy of this photograph was ordered under number C87485-42. TPL-7956. Previously cataloged as WO58568-1.

Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Columbia Brewing Co. (Tacoma)--People;

The early racking room at Columbia Brewing Company, where draft beer was barreled, was a matter of wooden barrels, cumbersome hand maneuvering methods and inexact controls. A thick layer of frost can be seen on the pipes above the workmen's heads. They are wearing heavy clothes to work in the chilled cellars. Ordered by Columbia Breweries in 1951. (TNT, 1/7/1952) (This was a copy print made by the Richards Studio of a Marvin D. Boland photograph #B4394). Previously cataloged as WO58568-3.

Brewing industry--Tacoma--1910-1920; Columbia Brewing Co. (Tacoma); Barrels--Tacoma; Columbia Brewing Co. (Tacoma)--People;

Two photographs were artfully combined in this March, 1936, work by photographer Marvin Boland. Large logs are pictured aboard an open railroad car on tracks while in the background are three unidentified men posed at the base of an enormous old-growth tree. TPL-2117; G75.1-081

Logs; Lumber industry--1930-1940; Trees;

This is a view of St. Regis logging operations in May of 1936. The forest location was not given. Here a worker is driving an earthmover of some sort. He is possibly clearing the way for a makeshift road so that trucks could access the area.

Lumber industry--1930-1940; St. Regis Paper Co.; Machinery;

Logging equipment at a Peterman logging site, location at or near Morton, in June of 1936. Equipment is a "donkey" used to move logs. These early diesel yarders were designed to yard logs to a landing using a spar tree. The "donkeys" were mounted on sleds made out of two logs which allowed them to be moved on trucks or railcars. It was possible for them to pull themselves over rough grounds to where they needed to be set up. This diesel yarder is possibly one of the first "Berger" brand yarders with the first V8 Caterpillar engine power plant. TPL-9855; G75.1-046 (Additional information provided by a reader)

Lumber industry--1930-1940; Donkey engines; Peterman Manufacturing Co. (Tacoma);

This internal view of St. Regis was taken in December of 1936. The location was not specified but it is believed to be the big paper mill at 801 Portland Ave., the former location of Union Bag & Paper Co. This particular view shows wet floors, drains, and machinery on both sides. It is possible that a washer had broken causing the wetness. TPL-6802; G37.1-013

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--Tacoma--1930-1940; Mills--Tacoma--1930-1940; Machinery;

Lumber operations at St. Regis. Although photographer Boland's notes do not mention the location of this particular St. Regis Kraft Co. plant, it is probably the large concern in Tacoma as photographed in December of 1936. The Tacoma plant had been transformed into a modern facility for the production of 60,000 tons of bleached pulp per year. The company had spent a million dollars for new machinery and reconstruction. The pulp plant was operating by the end of November, 1936, with a crew of 250. The bleaching unit would open about three months later. (T.Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--Tacoma--1930-1940; Lumber industry--Tacoma--1930-1940;

Two St. Regis employees, wearing white uniforms, are pictured at the Tacoma Kraft pulp plant on February 5, 1937. Steam is rising from some of the large unidentified machinery. St. Regis had undergone a $1,000,000 remodeling project to expand into the bleached pulp field. St. Regis was one of two pulp mills (Shaffer Pulp was the other) who manufactured high grade bleached and unbleached craft pulp for domestic and export markets. The plant was able to produce 150 tons of pulp daily. TPL-6804; G37.1-023 (T.Times 1-27-37, p.1, 5-articles on St. Regis)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940; Machinery;

Chicago, Milwaukee and St. Paul Railroad, Engine #10254. On an official test trip in March of 1920, a brand new Bi-polar engine pauses for some publicity shots. The class EP2 engine was manufactured by Alco-GE. The bi-polars were unique in design because the bi-polar fields for each motor were carried on the truck frame. The huge 265 ton, 3,240 hp bi-polars were designed specifically for passenger service in the Cascades and were an immediate success when put into service in 1920. Their top speed was rated at 70 mph and they could pull 1, 120 tons (14 cars) up a 2% grade at 25 mph. The electric locomotives were also unique in appearance, riding low on 44" drivers, and in sound, their trademark a distinctive high pitched shrill from their air whistles. (Charles and Dorothy Wood "Milwaukee Road West") G44.1-079, TPL-2379

Railroad locomotives--Tacoma; Railroad cars--Tacoma; Railroads--Tacoma; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma);

St. Paul Lumber Company crane loading a vessel at 1220 Saint Paul Ave, Tacoma

Industries; St. Paul Lumber Company; Cranes, Tideflats;

Henry McCleary Lumber Company crane isn McCleary, WA

Industries; Henry McCleary Lumber Company; Cranes; McCleary;

Bay City Lumber Company's crane in Aberdeen, WA

Industries; Bay City Lumber Company; Cranes; Aberdeen;

A lumber carrier built by Star Iron & Steel hard at work in a lumber yard in Enumclaw, WA.

Industries; Star Iron & Steel, Lumber, Enumclaw

Star Iron & Steel built lumber carrier at work in a lumber yard in Enumclaw, WA.

Industries; Star Iron & Steel; Lumber; Enumclaw;

Machinery at Star Iron &Steel Foundry at 435 E 11th St, Tacoma

Industries; Star Iron & Steel; Machinery; Tideflats

Cranes built by Star Iron & Steel for the ASARCO smelter at 5300 N 52nd St, Tacoma

Industries; ASARCO; Star Iron & Steel; Smelters;

ca. 1888. Tacoma smelter. This smelter on Ruston's waterfront was established as the Ryan Smelter in 1887 by Dennis Ryan. It was sold to William R. Rust in 1889 who then changed its name to the Tacoma Smelting & Refining Co. This photograph was taken around 1888 when the smelter was still in its early stages. Pilings jut out into the water at the right, tree stumps are abundantly scattered on the grounds, and the chimney in the photo's center was the first of three succeedingly larger smokestacks. The smelter would be sold to the American Smelting & Refining Co. (ASARCO) in 1905. (Print owned by Thomas Martin. Copy on file)

American Smelting & Refining Co. (Tacoma); Industrial facilities--Tacoma; Smelters--Tacoma;

ca. 1910. An unidentified logger stands in front of a logging shed, circa 1913. The shed is labelled "Grays Harbor Logging Co., Camp #2." The Grays Harbor Logging Company was located on the East Fork of the Wishkah River, outside of Aberdeen in Grays Harbor County, where they maintained three logging dams. The head of the company was Calvin Herbert "Bert" Shutt, who drowned in one of his own logging ponds on the river November 18, 1915. The company was in operation from around 1909-1920. By 1913, the company also maintained offices in Aberdeen, located on "Skidroad," near the corner of Hume and F St. The secretary/treasurer of the company was F.E. Burrows. ("They Tried to Cut It All" by Edwin Van Syckle) (photograph courtesy of Dan Powell) TPL-9835

Grays Harbor Logging Co. (Aberdeen); Lumber industry--Grays Harbor;

ca. 1931. Copy of the architect's watercolor rendering for the remodeling of the building at 105-07 E. 26th St., Tacoma for the Northwest Brewing Company. The watercolor is labeled - R.H. Ullrich, Brewery Engineer

Brewing industry--Tacoma--1930-1940; Northwest Brewing Co. (Tacoma);

ca. 1931. Tacoma Grain Company, Pyramid Flour plant taken from a boat on Puget Sound.

Flour & meal industry--Tacoma--1930-1940; Grain industry--Tacoma--1930-1940; Tacoma Grain Co. (Tacoma); Pyramid Flour (Tacoma)

ca. 1931. Testing bakery at the Tacoma Grain Company. A woman hold a fresh loaf of bread as she stands next to a testing oven. There is a line of seven loaves of bread on the shelf behind her. A bag of Centennial Silk-Sifted Flour is prominently displayed on the shelf next to the oven.

Tacoma Grain Co. (Tacoma); Flour & meal industry--Tacoma--1930-1940; Grain industry--Tacoma--1930-1940; Bread--Tacoma--1930-1940;

ca. 1893. Tacoma smelter. This photograph of the Tacoma Smelting & Refining Co. (previously named the Ryan Smelter) was taken for the New England Magazine and published in their February, 1893, issue. The smelter was owned by prominent businessman William R. Rust who had purchased it four years before. The smelter was originally built to produce lead but in a few short years, would become a major supplier of copper. A comparison of an earlier view of the smelter, taken circa 1888, now shows a completed pier on the right and an additional large building on the property. In 1905 the American Smelting & Refining Co. (ASARCO) bought the company and it remained an important part of Tacoma's economy until its closure in 1985. (New England Magazine - February, 1893 p.800) (Scan of original print - no negative or print on file)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma; Industrial facilities--Tacoma;

ca. 1906. Tacoma smelter smokestack. At the time of its completion in 1905, this was the largest concrete chimney in the world. It was located on the grounds of the American Smelting & Refining Co. (ASARCO) plant in Ruston. It would be superceded by the 571-foot smokestack completed in 1917. (Tacoma New Herald Annual NWR 917.97 T119N 1906)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma; Industrial facilities--Tacoma; Smokestacks--Tacoma;

ca. 1930. View of Pier No. 1 and the waterfront of Seattle - looking toward the city from the water. Buildings in photograph include: Luckenbach Steamship Co. Inc. on Pier No. 1, and the L. C. Smith Tower in the background. To the right is the Pacific Steamship Co. (building labeled Pier A.)

Luckenbach Steamship Co. Inc. (Seattle); Pacific Steamship Co. (Seattle); Smith Tower (Seattle); Port of Seattle (Seattle);