View of outdoor chip feeding section of St. Regis Paper Co. plant in Tacoma, May, 1961. The low covered structure may have housed wood chips. Machinery in background was probably used to transport the chips. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

ca. 1973. 1973 Richards stock footage. Aerial photograph, probably taken in the fall of 1973, of the St. Regis Paper Co. The plant, the county's largest non-military employer, was located between the Puyallup and St. Paul Waterways. St. Regis would be acquired by Champion International Corp. in 1984 and subsequently sold to Simpson Tacoma Kraft the following year. Simpson Tacoma Kraft still maintains the plant in 2007.

Aerial views; St. Regis Paper Co. (Tacoma)--1970-1980; Puyallup Waterway (Tacoma); St. Paul Waterway (Tacoma);

1936 daily operations at St. Regis. Interior view of a St. Regis Paper Co. facility, believed to be the Tacoma plant located at 801 Portland Ave. in 1936. Steel beams and steel or concrete chutes in sight. St. Regis employed 845 men to remodel its Tacoma location in order to transform it into a modern plant for the production of 60,000 tons of bleached pulp per year. New machinery was purchased to handle 25,000 short logs per hour and electric saws and machines to bark logs were also included. Tacoma's prime location near rail, water and (later) highway access made it a valuable asset for manufacturers in the industrial Tideflats. (T.Times 10-14-36, p. 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940;

1936 Daily operations at St. Regis. A St. Regis employee is shown on December 21, 1936, loading stacks of the company's pulp via forklift. Another tall stack of pulp is already on a raised pallet. This may be the St. Regis Tacoma facility located at 801 Portland Ave. which had recently undergone a $1,000,000 modernization. TPL-6803; G37.1-055

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Hoisting machinery; Mills--Tacoma--1930-1940;

1936 daily operations at St. Regis. Three employees of St. Regis Paper Co. stand behind a large cut log whose bark may have already been stripped. Although the particular St. Regis plant was not identified, this may have been the Tacoma plant located at 801 Portland Ave. The plant had purchased new machinery including machines to bark logs before going to regular pulp chippers and was undergoing transformation into a modern plant. By late November of 1936, the newly modernized Tacoma plant had commenced operations with a crew of 250. Eventually the plant would operate on a 24-hour day with four staggered shifts of eight hours. The modernization allowed for production of 60,000 tons of bleached pulp per year. TPL-2453; G36.1-023 (T.Times 10-14-36, pl 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Logs; Mills--Tacoma--1930-1940;

1936 daily operations at St. Regis. Interior view of newly expanded and modernized St. Regis mill, presumed to be in Tacoma, as seen on December 21-22, 1936. The company was proceeding into the bleached pulp business and had to extensively update their facility at 801 Portland Ave. in the Tideflats. St. Regis had previously manufactured unbleached pulp but the demand for the bleached product was rising, necessitating modernization. It would take another 60 days or so for the bleaching unit to be ready so the company would continue to produce unbleached pulp. G37.1-063 (T. Times 10-14-36, p. 5-article; T. Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940; Machinery;

A St. Regis employee maneuvers a lift to hoist stacks of pulp at the big pulp plant in late December of 1936. The St. Regis Kraft Co. had resumed operations with a crew of 250 after months of modernization and expansion. Unbleached pulp would be produced until the new bleaching unit was ready in 1937. G37.1-056 (T.Times 10-14-36, p. 5-article; T.Times 11-25-36, p. 5-article)

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940; Hoisting machinery;

Workers at St. Regis Kraft Co. are in the process of wrapping and weighing stacks of pulp for shipment in this February 5, 1937, photograph. St. Regis' Tacoma plant had undergone a $1,000,000 modernization project in order to manufacture bleached pulp. New machinery was brought in and the plant was reopened in late December of 1936 to provide jobs for hundreds of Tacoma residents. G37.1-069

St. Regis Paper Co. (Tacoma)--1930-1940; Paper industry--1930-1940; Lumber industry--1930-1940; Mills--Tacoma--1930-1940; Machinery;

1973 Richards stock footage. Aerial view in July of 1973 of the St. Regis Paper Co. The Puyallup Waterway is directly behind the plant. Due to St. Regis' vigorous efforts to curtail pollution, there is no sign of the plant's usual massive smoke emissions. TPL-5484

St. Regis Paper Co. (Tacoma)--1970-1980; Aerial views; Puyallup Waterway (Tacoma);

ca. 1937. St. Regis Kraft Co.; filtering plant circa 1937. (WSHS)

St. Regis Paper Co. (Tacoma)--1930-1940; Mills--Tacoma--1930-1940; Paper industry--Tacoma--1930-1940;

Aerial view shows progress being made on new construction for the St. Regis Paper Company in September, 1950. Established as a company in 1899, St. Regis was open for business in Tacoma in 1928. Rebuilt and modernized in 1936, St. Regis bought additional acreage from the St. Paul Tacoma Lumber Company in 1947 to add a paper mill and multi wall bag plant. According to the St. Regis 1950 annual report, Tacoma's expansion of their pulp mill would enlarge the pulp capacity from 115,000 to 135,000 tons a year. The new capacity will be in production in 1951.

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Factories--Tacoma--1950-1960; Progress photographs--1950-1960; Aerial photographs;

A view of the interior of the kraft paper mill at St. Regis Paper Company. The new high speed kraft paper machine was designed to operate at 2000 feet per minute and produce paper nearly fourteen feet wide (166 inches). It started operation January 5, 1949. The Poodle Dog Restaurant in Fife, Washington, had a large display of local points of interest on one of their walls. Copy of customer's negative for Poodle Dog enlargement. (St. Regis Paper Company Annual Report for 1949)

St. Regis Paper Co. (Tacoma)--1940-1950; Poodle Dog (Fife); Mills--Tacoma--1940-1950; Paper industry--Tacoma--1940-1950;

St. Regis is one of the pulp and paper companies that carry the paper producing cycle all the way from wood, to pulp, to paper, and into other various products. View of unidentified worker sitting in an operating booth, he is likely in the area where logs are kept prior to the wood chipping process.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Logs; Machinery; Equipment; Industrial facilities--Tacoma; Lumber industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis' first mill was located in Deferiet, New York; they now had paper and pulp mills located throughout the world. Interior view of the Tacoma St. Regis plant, an unidentified man is working with recently installed equipment. Photo ordered by Drew Engineering Company, an industrial air systems business, based out of Portland, Oregon.

Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Machinery; Industrial facilities--Tacoma; Drew Engineering Co. (Portland, Or.); St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis began producing paper in January 1949, prior to this the company had primarily been a pulp mill and produced Multiwall bags. Interior view of St. Regis plant, a laborer is working with a General Electric control panel; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Control rooms--Tacoma; Laborers--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of St. Regis plant, this battery of ten "Jones Majestic" Jordans is each driven by a 400 horsepower motor, the Jordans prepare stock for the Fourdrinier paper machines. Photo ordered by E. D. Jones and Sons Company, machinery and equipment manufacturers based out of Pittsfield, Massachusetts.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; E.D. Jones & Sons Co. (Tacoma);

St. Regis mills can be found in 23 locations across the United States, they have six plants in Canada, and one in Belgium, Brazil and Argentina. Interior view of St. Regis, view of paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis company spent the last few years focusing on expanding the Tacoma plant, the Pensacola, Florida plant would begin expanding during 1949. Interior view of St. Regis plant; battery of jordans each driven by a 400 horsepower motor, these prepare stock for the Fourdrinier paper machine. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma--1940-1950; Machinery; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

Interior view of plant, large rolls of paper are being processed after going through the "wet end" machine, they are at the pre-dryer stage. The paper then goes through a "Flakt air dryer" prior to being cut, baled, packaged and distributed. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers. TPL-6811

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

St. Regis had started producing kraft paper in January 1949, the tacoma plant had been remodeled over a long period of time and was operating at full capacity. View of St. Regis Paper Company Kraft Pulp Division; new mill on left, new laboratory is currently under construction; building contractor is Howard S. Wright and Company (T. Times, 3/13/49, p. 19).

Industrial facilities--Tacoma; Remodeling--Tacoma; Paper industry--Tacoma--1940-1950; Building construction--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

The pulp capacity at Tacoma has been planned so that this mill can make adequate quantities of bleached sulphate pulp available to the market, and at the same time supply the necessary bleached and unbleached sulphate pulp for its new high producing Kraft paper machine. Aerial view of St. Regis plant, located in Tacoma's tideflats area.

Paper industry--Tacoma--1940-1950; Aerial photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis office, Times, Maybin. St. Regis was planning immediate construction of $6 million kraft paper and bag mills. These three key men, studying plans for the construction, are, L-R, J.H. McCarthy, plant engineer, Walter DeLong, Vice President and director, manager of Tacoma operations, and Adolph C. McCorry, plant superintendent. Piles of logs and a water tower are seen outside the windows. St. Regis had been at this location since 1936. (T.Times, 8/21/1947, p.1)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Architectural drawings; Logs; Water towers--Tacoma--1940-1950; McCarthy, J.H.; DeLong, Walter; McCorry, Adolph C.;

Progress photographs at St. Regis, St. Regis Paper Company, Kraft Pulp Division. St. Regis Paper Company was well along in a big expansion program at the Tacoma plant, adding a multiwall bag plant as well as a pulp manufacturing plant. Tacoma was one of the locations of St. Regis that supplied pulp from their own mills for their kraft paper production. Adding the exterior to the new construction is nearly complete. (T.Times, 8/23/1948, p.5)

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950;

St. Regis consistently worked on intensive product development and sales promotion activities, not only to improve the penetration into existing markets, but to open up entirely new fields. Tacoma's St.Regis plant would have their own research laboratory within the industrial site. Interior view of plant, paper roll is being moved by a large "Ederer" crane.

Paper--Tacoma; Paper industry--Tacoma--1940-1950; Laborers--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

Aerial view, taken in August of 1948, of the large St. Regis Paper Co. plant located in Tacoma's industrial Tideflats. Waterway in center is the Puyallup Waterway. St. Regis was undergoing expansion as depicted by the unfinished building in the foreground. Three years later a big new bag plant would be built, adding to Tacoma's payroll.

Aerial photographs; Aerial views; St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Industrial facilities--Tacoma--1940-1950; Building construction--Tacoma--1940-1950; Puyallup Waterway (Tacoma);