Wheeler Osgood office interiors. Mr. Robert H. O'Neil was the assistant secretary at Wheeler Osgood at this time. The office walls are covered with plywood paneling and a highly-grained wooden door is open to the hallway. A file cabinet sits against the wall.

Wheeler, Osgood Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Offices--Tacoma--1940-1950;

Wheeler Osgood office interiors. A view of a smaller office at the plant's offices. The walls are covered with highly grained plywood paneling and the door is also. The desk is covered with a bloter and has a phone on the corner. One side chair sits against the wall and the floor is covered with linoleum.

Wheeler, Osgood Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Offices--Tacoma--1940-1950; Office furniture; Desks; Chairs;

Wheeler Osgood office interiors. A view of one of the offices at Wheeler Osgood with a large desk, two large windows with draperies and venetian blinds. There are guest chairs around the room and a shadow of a round table shows against the carpeting. The walls are covered in wood paneling. Florescent light fixtures are set at an angle to the corners of the room.

Wheeler, Osgood Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Offices--Tacoma--1940-1950; Office furniture; Desks; Chairs; Windows--Tacoma;

A four kiln unit building is being built at St. Paul and Tacoma Lumber Company, as part of their improvement plan. The kilns will be able to automatically stack lumber up to 12 feet high and 9 feet wide, and have a capacity of 2,500,000 board feet per month. Aerial view of St. Paul and Tacoma Lumber Company's kiln additions; four new drying kilns and concrete footings for green lumber storage in center (T. Times, 2/6/49, p. 17).

Lumber industry--Tacoma--1940-1950; Kilns--Tacoma; Construction--Tacoma; Aerial views; Aerial photographs; Industrial facilities--Tacoma; St. Paul & Tacoma Lumber Co. (Tacoma);

Exterior view of Wheeler Osgood plant, on spec.Some of Wheeler Osgood's "multiplicity of smokestacks" are shown here along with their water tower. The company started in Tacoma in 1889 and was a mainstay on the Tacoma tideflats. They became the world's largest producer of wooden doors.

Wheeler, Osgood Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Factories--Tacoma--1940-1950; Smokestacks--Tacoma--1940-1950; Water towers--Tacoma--1940-1950;

Cheney Lumber Company. A view of a baseball catcher wearing shin and knee protectors, a padded vest and his mitt. He holds his face guard. Two other players can be seen in the background on the baseball field. Ben Cheney had been a sponsor of youth baseball, basketball and bowling teams as well as being instrumental in landing a Pacific Coast League baseball franchise for Tacoma in 1960. He was also a stockholder in the San Francisco Giants baseball team, sponsors of the Tacoma Giants. TPL-7909

Cheney Lumber Co. (Tacoma); Baseball--Tacoma--1940-1950; Baseball players--Tacoma--1940-1950;

Visitors going through plant, Wheeler-Osgood, Miss Lingren. Puran Sawhney and his family, from New Delhi, India, were in Tacoma for two days. They were touring the United States and Mr. Sawhney wanted to learn about American industry. He is standing (second from right) with three men from Wheeler-Osgood by the railroad tracks that serve the door manufacturing facility. Stacks of lumber on wheels are lined up beside them.

Wheeler, Osgood Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Guests--Tacoma--1940-1950; Sawhney, Puran; East Indians; Business people--Tacoma--1940-1950; Railroad tracks--Tacoma;

An unidentified driver and two St. Regis timber workers sent a load of logs on its way from Camp #2 in Mineral, Washington to the company's paper mill in Tacoma in August of 1949. In 1949, St. Regis was making kraft paper in six of their mills; they manufactured about 360,000 tons of kraft paper per year. Tacoma was the newest kraft paper producing mill; paper production began there January 5, 1949. St. Regis purchased a pulp mill in Tacoma in 1930; they spent years modernizing and expanding the company's facilities. Before 1949 they had only manufactured pulp and multiwall bags at the Tacoma plant. In 1985 the mill became Simpson Tacoma Kraft Co. when it was purchased by Simpson Paper Co. of San Francisco. TPL-6875

Loggers--1940-1950; Paper industry--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Logs; Firs; Forests--Mineral; Cutover lands--Mineral--1940-1950; Woodcutting--Mineral; Trucks--Mineral; St. Regis Paper Co. (Mineral);

Modular Structures, Incorporated was a structural engineering business firm, they worked on residential and commercial contracts, and specialized on prefabricated plywood products. View of laborer moving prefabricated plywood panels with a "Towmotor" forklift; the panels will be used for prefabricated grain bins. Photo ordered by Douglas Fir Plywood Association.

Plywood; Laborers--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Hoisting machinery; Construction industry--Tacoma--1940-1950; Douglas Fir Plywood Association (Tacoma)--Products; Modular Structures, Inc. (Tacoma);

Modular Structures, Incorporated has their business located in South Tacoma at 4702 South Tacoma Way. View of unidentified laborers working on prefabricated plywood panels that will be used for prefabricated grain bins; photo ordered by Douglas Fir Plywood Association.

Plywood; Laborers--Tacoma--1940-1950; Lumber industry--Tacoma--1940-1950; Industrial facilities--Tacoma; Construction industry--Tacoma--1940-1950; Douglas Fir Plywood Association (Tacoma)--Products; Modular Structures, Inc. (Tacoma);

ca. 1956. Port Alice, British Columbia; aerial of timber. Alaska Pine & Cellulose Limited operated a chemical cellulose mill at Port Alice, surrounded by fast growing forests logged under a management license from the province. Port Alice lies on Quatsino Sound, an arm of the sea on the western side of Vancouver Island, B.C. The forests are mostly hemlock and offer an abundant supply of raw materials. Nearby Victoria Lake supplies water, the area has its own lime rock quarry and a deep water port for overseas shipping. For all these reasons, Alaska Pine chose to expand and develop this mill further in 1956, upping its capacity to 125, 000 tons of chemical cellulose a year; an investment of $14,000,000. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Port Alice B.C.);

ca. 1956. Port McNeil, logging. This appears to be company owned row housing or bunk houses built for the loggers working at the Port McNeil location. The small houses are all identical and two raised wooden sidewalks lie between the two rows of houses. Several men are sitting or lounging on the sidewalks. Housing arrangements like this were provided for the over 2,000 Canadian loggers.

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Port McNeil B.C.);

ca. 1956. Port McNeil, aerial, logging. The logging camp sits on the shore surrounded by old growth forests. A dock extends out into the water and rafts of logs lie in the water. Established in 1953, Alaska Pine's logging camp at Mahatta River, on Vancouver Island, is one of three modern logging communities that provide wood for the Port Alice, B.C., chemical cellulose mill. Logs are rafted to the mill, entirely within the protected waters of Quatsino Sound. Non pulp species are barged to the Vancouver area sawmills. (1957 Annual Report, Rayonier Inc.)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Port McNeil B.C.);

ca. 1956. Timber industry scenes from Grays Harbor and the Olympic Peninsula, ordered by Malcolm McGhie. The sign identifies this as an experimental forest established in 1948 by the U.S. Forest Service cooperating with the St. Regis Paper Co. Trees were now being viewed as a renewable resource. They were being raised to support the pulp, paper and wood chemical industry. In the meantime, old growth forests were clear cut to supply timber for commercial purposes.

Lumber industry--Grays Harbor--1950-1960; Trees; St. Regis Paper Co. (Tacoma)--1950-1960;

ca. 1956. Alaska Pine, sawmill plant at New Westminster, B.C. During 1956, Alaska Pine set up a new high speed production line, part of which is shown here, for processing western red cedar bevelled siding. The sawmills at the Marpole and New Westminster Divisions produced a variety of products for wholesale markets in the United States and Canada. The products included hemlock and Douglas fir two-inch dimension lumber, sheathing and boards, cedar siding and shingles and industrial grades for such uses as garage doors, ladders and millwork. Alaska Pine was a leading promoter of the use of cedar, especially as siding. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Vancouver B.C.);

Rayonier and Rayflo plants, ordered by Malcolm McGhie. Rayonier, Inc. manufactured paper, pulp, cellulose products and wood chips. This series of pictures appears to have been taken at the Port Alice, British Columbia, cellulose mill and woodmill. Port Alice was part of Alaska Pine, the Canadian subsidiary of Rayonier, Inc. The logs in the photograph appear to be undergoing the "barking" process. The bark is removed from the log and and the remaining product will either be processed for cellulose pulp or wood chips.

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Port Alice B.C.);

ca. 1956. Alaska Pine, Rayflo plant at Marpole. This is the new plant being constructed in Vancouver, B.C. at the Marpole Sawmill Division of Alaska Pine for the production of the chemical rayflo. Alaska Pine was the Canadian subsidiary of Rayonier Inc. Rayflo was produced from hemlock residuals obtained from the Marpole mill. The chemical was a dispersant that could be added to oil well drilling mud to control its viscosity and chemical properties. Rayflo was one of a new breed of "silvichemicals" being developed from the byproducts of cellulose manufacture by Rayonier. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Chemical industry--British Columbia--1950-1960; Alaska Pine & Cellulose Limited (Vancouver B.C.);

ca. 1956. Alaska Pine, Rayflo plant at Marpole. Alaska Pine & Cellulose Limited, a Canadian subsidiary of Rayonier Inc., was constructing a new plant at Vancouver B.C. for the production of Rayflo, a chemical used in oil well drilling, and its distribution to foreign markets. Rayflo was a new chemical developed from experimentation with the byproducts of cellulose production. It was produced from hemlock residuals obtained from the Marpole sawmill. It was used to control the chemical and physical properties of oil well drilling mud. Rayflo was the result of product development by Rayonier Inc. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Chemical industry--British Columbia--1950-1960; Alaska Pine & Cellulose Limited (Vancouver B.C.);

ca. 1956. Alaska Pine, Rayflo plant at Marpole. Rayflo was a chemical used in the oil industry. When added to oil well drilling mud, it made it possible to control the chemical and physical properties of the mud. Although developed only a few years earlier, rayflo was in demand. The new factory was being built by Alaska Pine, the Canadian Subsidiary of Rayonier, for production of the new chemical. It was previously produced in Grays Harbor, Wa. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Chemical industry--British Columbia--1950-1960; Alaska Pine & Cellulose Limited (Vancouver B.C.);

ca. 1956. Timber industry scenes from Grays Harbor and the Olympic Peninsula, ordered by Malcolm McGhie. Two hard hatted workers from Rayonier Inc. stand in an old growth forest. This photograph really shows the size of these enormous trees, the loggers appear tiny next to them. This stand of hemlock is approximately 80 years old. The trees are 110 - 125 feet high and average 24 inches in diameter. This track was recently thinned to promote growth of the best trees. Rayonier and its Canadian subsidiary Alaska Pine produced chemical cellulose, pulp, paper and lumber. They were also experimenting in developing new products called "silvichemicals" from the by products of cellulose manufacture. (Rayonier's annual report for 1956)

Lumber industry--Grays Harbor--1950-1960; Trees; Logs; Rayonier, Inc. (Grays Harbor);

ca. 1956. Portrait of a timber worker in a hard hat bearing the green cross safety logo. Photograph was taken on Rayonier Grays Harbor timber lands and ordered by Malcolm McGhie. Timber and forests fueled the economy of the Olympic Peninsula.

Lumber industry--Grays Harbor--1950-1960; Trees; Logs; Rayonier, Inc. (Grays Harbor);

ca. 1956. Alaska Pine, sawmill plant at New Westminster, B.C. During 1956, Alaska Pine set up a new high speed production line, part of which is shown here, for processing western red cedar bevelled siding. The sawmills at the Marpole and New Westminster Divisions produced a variety of products for wholesale markets in the United States and Canada. The products included hemlock and Douglas fir two-inch dimension lumber, sheathing and boards, cedar siding and shingles and industrial grades for such uses as garage doors, ladders and millwork. Alaska Pine was a leading promoter of the use of cedar, especially as siding. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Vancouver B.C.);

ca. 1956. Alaska Pine, Marpole Division sawmill plant, Vancouver B.C. Semi-finished hemlock lumber waits on kiln-cars to roll into the dry kilns. Alaska Pine was a pioneer in kiln drying of hemlock and developing it as a commercial product. The company kiln-dries about 60% of its lumber output, including practically all of the hemlock products. Properly dried hemlock makes excellent construction lumber. This stimulated broader use of a timber still abundant in the fifties. The company was also promoting the use of cedar, particularly as siding. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Vancouver B.C.);

ca. 1956. Alaska Pine, Marpole Division sawmill plant, Vancouver B.C. Big logs are brought to the mill in large rafts towed from the company's logging operations hundreds of miles away. They are cut into 20 foot lengths in the water and pushed onto the loghaul, which carries them into the mill. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Vancouver B.C.);

Rayonier and Rayflo plants, ordered by Malcolm McGhie. Rayonier, Inc. manufactured paper, pulp, cellulose products and wood chips. This series of pictures appears to have been taken at the Port Alice, British Columbia, cellulose mill and woodmill. Port Alice was part of Alaska Pine, the Canadian subsidiary of Rayonier, Inc. The logs in the photograph appear to be undergoing the "barking" process. The bark is removed from the log and and the remaining product will either be processed for cellulose pulp or wood chips.

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Port Alice B.C.);

New construction at the Rayonier and Rayflo plants, ordered by Malcolm McGhie. This is believed to be the chemical cellulose plant of Rayonier's Canadian subsidiary Alaska Pine at Port Alice, British Columbia, near the northwestern end of Vancouver Island. The mill is surrounded by fast growing forests that supply an unending source of raw materials. Nearby Victoria Lake provides a fresh water supply and deep water docking provides an outlet for overseas shipment. The plant was undergoing large scale construction to increase the productivity of the mill. Most of the construction was scheduled to be completed by the third quarter of 1957, at a cost of $14,000,000. (1956 Annual Report, Rayonier Inc.)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Alaska Pine & Cellulose Limited (Port Alice B.C.);

ca. 1956. Alaska Pine, Rayflo plant at Marpole. Two men stand on the scaffolding erected around the tank being constructed for Alaska Pine's new plant in Vancouver, B.C. The plant will produce rayflo, a chemical manufactured from Hemlock byproducts and used in the production of oil well drilling mud. Alaska Pine was the subsidiary of Rayonier Inc. and one of the largest timber concerns on the west coast. (Rayonier's annual report for 1956)

Lumber industry--British Columbia--1950-1960; Trees; Logs; Chemical industry--British Columbia--1950-1960; Alaska Pine & Cellulose Limited (Vancouver B.C.);

ca. 1956. Timber industry scenes from Grays Harbor and the Olympic Peninsula, ordered by Malcolm McGhie. A log train chugs along on the Rayonier owned main line railroad in Washington. The locomotive is one of two new diesel-electric locomotives put in service in 1956, replacing steam. While the two main lines were being improved, spur railroad tracks were being replaced by company owned truck roads. By May of 1957, the conversion to truck logging would be complete. (Rayonier annual report for 1956)

Lumber industry--Grays Harbor--1950-1960; Trees; Railroad locomotives--Grays Harbor; Logs; Rayonier, Inc. (Grays Harbor);

ca. 1956. Timber industry scenes from Grays Harbor and the Olympic Peninsula, ordered by Malcolm McGhie. A locomotive owned by Rayonier Inc. hauls logs across a railroad trestle; carrying them to a mill or paper plant for processing. In 1956, Rayonier was replacing the spur railroad lines with private truck roads that led to two company owned main logging railroads. Funds were spent to improve the main tracks, trestles and replace the steam locomotives with new diesel-electric ones. By May 1957, it was projected that the conversion to truck logging would be complete. This shows a Rayonier Baldwin diesel putting a logging train across the Hoko River Bridge on the Olympic Peninsula. (Rayonier annual report for 1956)

Lumber industry--Grays Harbor--1950-1960; Trees; Railroad locomotives--Grays Harbor; Logs; Rayonier, Inc. (Grays Harbor);

Logging near Mineral; ordered by Malcolm McGhie. Long logs are being lashed by chains to the logging truck and to one another so that they will not slip during transportation. The logs are almost twice as long as the truck bed. Mineral is a small logging town on Mineral Lake fourteen miles north of Morton in north central Lewis County. The loggers are working at St. Regis's Camp #2 near Mineral. Since private roads such as this are not governed by state highway limitations, vehicles can built and loaded as needed. (1956 Annual Report, St. Regis Paper Co.)

Lumber industry--Mineral; Logs; Cutover lands--Mineral; Trucks; Woodcutters; Loggers--Mineral; Paper industry--Tacoma--1950-1960; Firs; Forests--Mineral; Woodcutting--Mineral; St. Regis Paper Co. (Mineral);