Back of Photo:
"St. Regis - Western Star Paper Machine
Clipping taped to back: "READ ALL ABOUT IT--Seven St. Regis Paper Co. officials, her for this morning's official dedication of the company's $30,000,000 expansion of its Tacoma kraft pulp and paper mill, look over a special 18-page section of The News Tribune, marking the event. Seated, left to right, are Phillip B. Duffy, vice president, the corrugated container division; Reginald L. Vayo, vice president, kraft division sales; and Kenneth D. Lozier, vice president, of advertising and sales promotion, all of New York. Standing are George J. Kneeland, New York, assistant vice president; Russell R. Major, Tacoma, assistant comptroller; John A. McDermott, Jacksonville, Fla., vice president, pulp and paper manufacturing; and Dr. William R. Haselton, general manager of the Tacoma plant."

Side view of the Henry Mill & Timber Co. building with smoke pluming in the background. A more rustic wooden structure, crane and frame under construction are in the foreground.

Two men in suits and hats observe a laborer move lumber along a series of rollers outside.

St. Paul & Tacoma Lumber Company. Several railroad carsloaded with logs are standing in the yard at the St. Paul & Tacoma Lumber Company. The City of Tacoma can be seen in the background. Since the company had their own rail spur they could deliver the logs to whatever part of the plant they needed or they could even dump them into the waterway which was nearby.

Lumber industry--Tacoma--1940-1950; St. Paul & Tacoma Lumber Co. (Tacoma);

Douglas Fir Plywood Association, stages of plywood prefabricated panel manufacturing taken at Tacoma Lumber Fabricating Company. The panels were used to build prefabricated houses. Here workmen are placing one of the panels in a steel pressure press. This press is one of six the company owns. The company took over the location of the earlier Henry Mill in 1944. (T.Times, 11/6/1946, p.7)

Plywood; Building materials industry--Tacoma--1940-1950; Tacoma Lumber Fabricating Co. (Tacoma);

Douglas Fir Plywood Association, stages of plywood prefabricated panel manufacturing taken at Tacoma Lumber Fabricating Company. A framework for a one of the prefabricated panels is sent through a roller before being placed on a piece of plywood which will be the covering of one side of the panel. The prefabricated panels were manufactured in standard sized for floors, walls, ceilings, partitions, and roofs. They are freely adaptable to contractors' specification for all grades of houses. (T.Times, 11/6/1946, p.7)

Plywood; Building materials industry--Tacoma--1940-1950; Tacoma Lumber Fabricating Co. (Tacoma);

Douglas Fir Plywood Association, stages of plywood prefabricated panel manufacturing taken at Tacoma Lumber Fabricating Company. Men add another plywood cover to the side of the milled lumber frame interior of the prefabricated panel. The company's goal is to complete 1,000 panels per day, enough for 10 complete homes per day. (T.Times, 11/6/1946, p.7)

Plywood; Building materials industry--Tacoma--1940-1950; Tacoma Lumber Fabricating Co. (Tacoma);

Aerial view of Puget Sound Plywood, Inc., other plants, and the waterways on the Tacoma tideflats. Philadelphia Quartz has a new plant to make silicate of soda, a liquid mineral adhesive used extensively in manufacturing plywood and composition board. Puget Sound Plywood opened in March 1942. They were the first cooperative plywood plant in the city, organized by a group of Tacomans and others connected with and interested in the lumber industry. The plant occupied 3 1/2 acres at the head of East F Street and East E Street between the City and Middle waterways. With rail facilities direct to the plant, there were switching facilities to all railroads. (T.Times, 2/25/1942; Ledger, 1/25/1942)

Puget Sound Plywood, Inc. (Tacoma); Waterfronts--Tacoma--1940-1950; Plywood; Lumber industry--Tacoma--1940-1950; Cooperatives--Tacoma;

ca. 1946. The unveiling of the giant cross section of a tree trunk at the Northwest Door Company. In the summer of 1946, Northwest Door Co. cut down this tremendous old growth Douglas Fir tree southwest of Mt. Rainier. They shipped a cross section of the stump to their Tacoma plant. The tree was almost 14 feet in diameter. The small signs on either side of the section of tree show what years each ring represents and events that occurred that year. A crowd turned out in the rain to watch the unveiling of the log. The cross section of fir was moved in 1965 to the Lakewood branch of the Pierce County Library system.

Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950;

For I.W. Johnson Engineering Company. An interior view of a sawmill near Packwood, Washington. A large, radial-arm saw, upper center, cuts lumber to length. A narrow conveyor belt seen in the foreground moves lumber through the mill.

Saws; Mills--Packwood--1940-1950; Logs; Lumber industry--Packwood--1940-1950; Woodcutting--Packwood--1940-1950;

For I.W. Johnson Engineering Company. An interior view of a sawmill near Packwood, Washington. Logs just delivered to the mill have already been cut into convenient lengths (usually 32 feet) for the machines that will have the next go at cutting the logs into lumber. (Fortune Magazine, April 1934)

Saws; Mills--Packwood--1940-1950; Logs; Lumber industry--Packwood--1940-1950; Woodcutting--Packwood--1940-1950;

An interior view of a sawmill near Packwood, Washington. Large logs are stacked on the left while two men operate the "head-rig", one to the right and one in the center, background. The log is being broken down. Running the "head-rig" is a two person operation. The "sawyer", in the center right, stands beside the carriage on which the log is clamped and as the carriage swings the log into the teeth of the saw he signals, with hand signals, to the "setter", on the right, operating the carriage, where and how much to cut. For I.W. Johnson Engineering Company. (Fortune Magazine, April 1934)

Saws; Mills--Packwood--1940-1950; Logs; Lumber industry--Packwood--1940-1950; Woodcutting--Packwood--1940-1950;

Cascade Pole Co. manufactured poles and posts using Tacoma lumber. They manufactured their own creosote, and pressure creosoted their products for longer durability. Victor C. Monahan was President and J. R. McFarland was the Vice-President. Exterior view of Cascade Pole Co., a pole is being shaped using this machine.

Logs; Lumber--Tacoma; Lumber industry--Tacoma--1940-1950; Machinery; Cascade Pole Co. (Tacoma);

Cascade Pole Co. manufactured poles and posts using Tacoma lumber. They manufactured their own creosote, and pressure creosoted their products for longer durability. Victor C. Monahan was President and J. R. McFarland was the Vice-President. Exterior view of Cascade Pole Co., logs are being brought into the plant by the railroad car.

Logs; Lumber--Tacoma; Lumber industry--Tacoma--1940-1950; Railroad freight cars--Tacoma; Cascade Pole Co. (Tacoma);

Cavanaugh Lumber was owned by Cecil Cavanaugh. In 1931 they had a fire that destroyed most of their plant and a significant amount of their stock. They were able to rebuild and expand their business. View of unidentified man from Cavanaugh Lumber unloading plywood using a tool that measures the width of plywood, from company truck, photo ordered by Douglas Fir Plywood Association.

Plywood; Lumber industry--Tacoma--1940-1950; Trucks--Tacoma--1940-1950; Cavanaugh Lumber Co. (Tacoma); Douglas Fir Plywood Association (Tacoma);

The Cheney Stud brand carries a stud horse imprinted on the ends and faces of Cheney Studs, it quickly became recognized throughout the industry as a sign of top quality. The demand for eight foot Cheney Studs dramatically increased while the availability of suitable tie lumber for the portable mills and the market for railroad ties decreased. Exterior view of Cheney plant, Cheney Studs are stacked up, hoisting machinery is in center.

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1940-1950; Hoisting machinery; Industrial facilities--Tacoma; Cheney Lumber Co. (Tacoma);

Cheney Lumber Co. was a modern stud mill, providing Tacoma and national industries with the building material most needed. Cheney had been at their current site since 1942, they were located on the west side of Port of Tacoma Road, north of East 11th Street. Exterior view of pier with studs, laborers and hoisting pulleys and equipment.

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1940-1950; Hoisting machinery; Industrial facilities--Tacoma; Cheney Lumber Co. (Tacoma);

Loading a shipment of lumber from Cheney Lumber Company was made easier by the Cheney's facilities and dock on Sitcum Waterway. Cranes could load directly from railroad cars with tracks on the dock. TPL-5677

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1940-1950; Hoisting machinery; Industrial facilities--Tacoma; Cheney Lumber Co. (Tacoma);

Ben B. Cheney founded Cheney Lumber Co. in 1936. The Cheney Co. was originally established to manufacture railroad ties. Timber was purchased and resold to small portable tie mills manufacturing ties for both domestic and foreign markets. Cheney eventually set out to strategically redevelop the 12 foot stud, prices would drop and less lumber would be wasted, making the 8 foot stud quite popular. Exterior view of Cheney plant, lumberyard and docks.

Lumber industry--Tacoma--1940-1950; Lumberyards--Tacoma; Lumber--Tacoma; Building materials industry--Tacoma--1940-1950; Piers & wharves--Tacoma; Industrial facilities--Tacoma; Cheney Lumber Co. (Tacoma); Shipping--Tacoma--1940-1950;

Cheney Lumber Company. New construction of large residences on a cleared hillside.

Cheney Lumber Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Dwellings--Tacoma--1940-1950; Construction--Tacoma--1940-1950;

Cheney Lumber Company. Three loggers in one of the Cheney Lumber camps prepare to bring down another large tree to be cut into lumber. Ben B. Cheney started the Cheney Lumber Company 1936. Prior to this time large amounts of wood were wasted in the production of railroad ties and studding used in construction. Mr. Cheney was troubled by this and had an idea that by making studding in a standard 8 foot length much of the waste could be saved. He went to the tie mills and bought their waste and cut it into studs, thereby making an industry. Cheney Lumber Company's 7 plants produced 1 million studs per day. Ben Cheney was credited with standardizing architecture in America with his methods for mass-producing studing. (TNT, 6/11/1960)

Cheney Lumber Co. (Tacoma); Lumber industry--Tacoma--1940-1950; Trees; Woodcutting;

Aerial view of Cheney Lumber Company, also the Port of Tacoma Dock with Cheney ties.

Cheney Lumber Co. (Tacoma); Port of Tacoma Dock (Tacoma); Aerial photographs; Ships--Tacoma--1940-1950; Piers & wharves--Tacoma--1940-1950; Marine terminals--Tacoma--1940-1950; Waterfronts; Industry--Tacoma--1940-1950;

Douglas Fir Plywood Association. Two men stand by a display for K-Veneer and its uses. Numerous new plywood products were exhibited such as surfacings for panels and combination products, some manufactured from sawdust and other substances previously considered waste. (T.Times, 6/11/1947, p.1)

Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;

Demonstration of farm machinery, Machinery Manufacturing and Sales Inc., Bob Airey. Logs are moved up to a portable sawmill along a chain conveyor belt. Men operate the machinery while others watch the machinery in operation. Harrison Brothers, building materials and excavating contractors, are seen on the adjacent property at 225 Wakefield Drive. Taller buildings are seen in the background. TPL-3826

Logs; Machinery; Machinery industry--Tacoma--1940-1950; Machinery Manufacturing & Sales, Inc. (Tacoma);

A. H. Cox & Co. at St. Paul & Tacoma Lumber Co. logging operation at Puyallup. A log train transports the logs from the logging grounds to the sawmill plants located in Tacoma. The logs are then dumped into a log pond where they are stored. View of log train cars, with laborer making some final checks, mountain view in background.

Lumber industry--Tacoma--1940-1950; Machinery; Logs; Woodcutting--Puyallup; Railroad tracks--Puyallup; St. Paul & Tacoma Lumber Co. (Tacoma); Rainier, Mount (Wash.)

Full size glued up plywood beams are set up where they will be tested to determine how much pressure they can withstand without collapsing. View of unidentified man testing plywood at Parkland, photo ordered by Douglas Fir Plywood Association.

Plywood; Lumber industry--Tacoma--1940-1950; Testing--Tacoma; Douglas Fir Plywood Association (Tacoma);

In July of 1946, a young logger, holding an adze, leans against the base of a newly cut old growth douglas fir. The base of the tree is almost 14 feet in diameter. A section from the trunk of this tree was shipped to the Northwest Door Company in Tacoma where it was displayed. The tree was found southwest of Mt. Rainier in the center of western Washington at 1,050 feet elevation. Its lowest branch was 95 feet above ground level. However, the tree had been damaged by natural causes and was shattered 198 feet from the base and beginning to rot. Its rings showed the tree to be about 586 years old. (TNT 8/21/1946, pg. 1)

Logs; Forests--Washington; Lumber industry--Tacoma

ca. 1946. A section of Douglas Fir tree trunk almost 14 feet in diameter arrives at the Northwest Door Co. plywood plant. Marilyn Maras (now Cade,) daughter of Anthony "Spike" Maras, peeks from the top of the trunk, showing by comparison the huge size of the log. The log was cut by the Davis & Maras Co. from the Northwest Door Co.'s logging lands southwest of Mt. Rainier. A section of the log remained on display at Northwest Door from 1946 - 1965, when it was moved to the Lakewood branch of the Pierce County library.

Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950; Logging trucks--1940-1950; Maras, Marilyn;

Founded in 1888, the St. Paul & Tacoma Lumber Company located on Tacoma's tideflats was one of the largest lumber companies in the Pacific Northwest. Railroad cars have brought logs to the log holding area, called a log dump, in August of 1946. The company's plant is seen in the background. To the right of the buildings is a long ramp that conveys the logs into the facility from the holding pond. Lumber was still king in the late '40s among Tacoma industries. About 100 plants were involved in the production of raw lumber or finished lumber products. Lumber was needed to build millions of homes and buildings. The plywood industry was progressing with more and more uses found for the product and pulp was used for heavy wrapping paper, explosives and rayon. The lumber industry provided employment for thousands including the 1,000 working for St. Paul & Tacoma. (T.Times 8-30-46, p. 12-article on lumber industry)

Logs; Lumber industry--Tacoma--1940-1950; St. Paul & Tacoma Lumber Co. (Tacoma);

On July 30, 1946 seven children including Shirley Maras (now Walcott) (far left), Kenny Schumaker (third from left), Sharon Maras (now Gregg) (standing at top) and Marilyn Maras (now Cade)(far right) were photographed with a huge tree section that was cut from an old-growth Douglas fir that had been felled by loggers working for the Davis and Maras Company. The tree section which weighed 18,567 pounds and was over 13 feet in diameter was on its way to the Northwest Door Company in Tacoma owned by Herman E. Tenzler. Once there a gigantic slice was cut from it and put on display outside the Northwest Door entrance. Some years later the display slice of Douglas fir was moved to the Tenzler Library in Lakewood. (TNT 8/21/1946, pg. 1) (names supplied by Anthony "Spike" Maras) TPL-8386

Lumber industry--Tacoma--1940-1950; Children playing outdoors--Tacoma--1940-1950; Logs; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950; Schumaker, Kenny; Maras, Shirley; Maras, Marilyn; Maras, Sharon;