Another view of the Brute Crane operated by the George Scofield Co. taken on March 28. 1930, by Marvin Boland; see A139500-30 for additional shot. The crane is apparently in the process of scooping up material. Brute Cranes were manufactured by Star Iron & Steel Co. of Tacoma. Photograph ordered by Star Iron & Steel Co.; copy made of customer print on September 17, 1963.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

A Brute Crane manufactured by the Star Iron & Steel Co. of Tacoma is in the process of hoisting lumber at the Seattle Export Lumber Co. There are piles of lumber on both sides of the crane. Date of original photograph is unknown; copy made on September 17, 1963.

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Lumber; Seattle Export Lumber Co.;

Porta Tower in operation at the Cotten Bros. logging site in Packwood on October 23, 1963. Used as portable steel spur trees, "Porta Towers" were manufactured by Star Iron & Steel Co. of Tacoma for use in the logging industry. Star Iron & Steel was well known for their cranes and specialized equipment which included hydraulic presses, log barkers, radio and television towers, and chip handling buckets. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel; Hoisting machinery; Logs;

Crane under construction at Star Iron & Steel Co. The Star Iron & Steel plant was located in new quarters at 326 Alexander Ave. in the Port Industrial area. Custom designing and manufacturing special equipment, cranes, and hoists was its primary business. During July, 1964, gantry cranes weighing 50 and 350 tons were being manufactured by Star Iron & Steel. Gantry cranes were similar to overhead bridge cranes except that the bridge for carrying the trolly or trolleys was rigidly supported on two or more legs running on fixed rails or other runway. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hoisting machinery;

Interior of Star Iron & Steel Co. plant on Alexander Ave. in the Port Industrial area. this is a general view of the machine shop area which has over 15,000 square feet of well lighted, heated space. Founded in 1908, Star Iron & Steel was one of the oldest steel fabricating companies in the Pacific Northwest. Cranes, hoists and special machinery were custom designed and manufactured. In July, 1964, Star Iron & Steel were busy constructing 50 and 350 ton gantry cranes. Gantry cranes are similar to overhead cranes with the same strength and durability but are raised above the floor by support legs mounted on the end trucks. There was ample space in the machine shop area also for assembling crane trolleys, hoists, drive trucks and other mechanical equipment. TPL-9626 (SIS booklet, c. 1965)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hoisting machinery;

Dirt pours out of the opened clam shovel which is suspended by thin cables in this July 31, 1962, photograph taken at Graystone of Tacoma. The shovel is believed to have been manufactured by the Star Iron & Steel Co. of Tacoma. Star Iron built cranes and specialized equipment to handle everything from salmon to missiles; their products were used in WWll to help clear the Pearl Harbor disaster. Its crane capacities ranged to more than 350 tons. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Hoisting machinery;

An employee of Ace Furnace & Steel Co. leans one arm against a massive steel jet propulsion fuel storage tank on company property on August 5, 1958. He appears diminutive when contrasted with the 10.6 foot diameter tank. The gas tank measures 77.5 feet in length. Ace Furnace produced steel storage tanks for oil, gasoline and water, stacks, marquees, canopies, steel heating and ventilation systems, boilers, furnaces, and marine sheet metal. The company's major output now are tanks of all sizes, approximately 400-800 tanks per month. The huge tanks pictured above were just built for McChord Air Force Base. It is estimated that these were the largest shop fabricated steel tanks ever built in Tacoma. The Northern Pacific cars in the background would make transportation of these heavy steel products easier and more efficient. Photograph ordered by Ace Furnace & Steel Co. (TNT 9-1-58, C-7)

Ace Furnace & Steel Co. (Tacoma); Steel industry--Tacoma; Storage tanks--Tacoma; Railroad freight cars--Tacoma--1950-1960;

The George R. Marvin Co. was a steel fabrication plant located on Taylor Way in the Tideflats. Besides manufacturing cranes and other hoists, they also were involved in fabricated steel products. A model in an October 4, 1957, photograph is examining a piece of machinery manufactured by the Marvin Co. The exact use of the product is not known; it does appear to be solidly constructed and capable of containing either solids or liquids. What appears to be an Air Force fuel tank is in the background of the photograph. Photograph ordered by the George R. Marvin Co.

George R. Marvin Co. (Tacoma); Steel industry--Tacoma--1950-1960;

Molten showers were not an unusual occurrence at the Bethlehem Pacific Coast Steel works in Seattle. The steel manufactured at Bethlehem's facilities was used in many structures locally, including the Alaska Way Viaduct and the Tacoma Narrows Bridge. The Bay area's Carquinez Straits Bridge utilized Bethlehem Corporation's steel in the approaches to the bridge and Bethlehem's shipbuilding division in Quincy, Mass., produced the steel used in 25,000 to 106,500-ton tankers. Bethlehem plants nationwide were booming and a new basic steel research center was being built in the adjoining site to Lehigh University in Pennsylvania to carry on vital new research projects. (TNT ad, 1-2-58, B-8)

Bethlehem Pacific Coast Steel Corp. (Seattle); Steel industry--Seattle; Industrial facilities--Seattle;

Bethlehem Pacific Coast Steel's works were booming in the 1950's, necessitating a $25 million dollar expansion in Seattle, as well as improvements and new construction elsewhere. New electric furnaces promised to boost steelmaking capacity 70% to 420,000 tons annually. Workers are pictured on March 6, 1958, seemingly dwarfed by the size of the huge equipment used in the Seattle plant. A cascade of sparks and smoke stream from an open hearth. The men are wearing hard hats and long coats for protection.

Bethlehem Pacific Coast Steel Corp. (Seattle); Steel industry--Seattle; Industrial facilities--Seattle;

Smoke billows out of three smokestacks at one of Bethlehem Pacific Coast Steel's Seattle plants on July 27, 1954; two other smokestacks are quiet. Bethlehem Steel produced much of the steel used in well-known landmarks: the Tacoma Narrows Bridge and the Alaskan Way Viaduct. They had several locations in Seattle including a Rolling Mill, Bolt & Nut Dept., Tank Farm, and Mill Depot. Photograph ordered by Bethlehem Pacific Coast Steel Corp., Seattle.

Bethlehem Pacific Coast Steel Corp. (Seattle); Smokestacks--Seattle;

Ace Furnace & Steel Co. were steel fabricators whose plant was located at 3740 South Union Avenue. One of their trucks and trailers was loaded with large storage tanks when photographed in front of the company on October 16, 1954. There was plenty of advertising on the truck and trailer, and also on the tanks. The steel firm had expanded their business in the early 1930's which eventually led to including transport of their products to customers. Ace Furnace manufactured furnaces, tanks, gasoline tanks and pre-fabricated steel gas stations. According to the 1954 City Directory, Ace Furnace was owned by Alvin T. Davies; he also owned Birchfield Boiler and Tacoma Boiler Works. Photograph ordered by Ace Furnace & Steel Co.

Ace Furnace & Steel Co. (Tacoma); Trucks--Tacoma--1950-1960; Storage tanks--Tacoma; Metalworking--Tacoma; Signs (Notices);

Steel pieces of a new hangar are being hoisted into place by a Bethlehem Pacific Coast Steel Corporation crane on September 24, 1954. More space was becoming necessary at McChord Field to house and repair aircraft. Once completed, this new main hangar will encompass 22,000 square feet. The Seattle District Corps. of Engineers, U.S. Army, designed the hangar and supervised construction. All steel for the framework was fabricated by Bethlehem Steel 's Seattle plant and the framework itself erected by the company's steel workers. Photograph ordered by Bethlehem Pacific Coast Steel Corporation. (TNT 12-26-54, C-11)

Bethlehem Pacific Coast Steel Corp. (Seattle); Building construction; Progress photographs; Steel; Hangars;

Aluminum panels nearly cover the entire roof of a new steel hangar at McChord Field on November 18, 1954. Two workers are in the process of marking and drilling nails into the panels. Aluminum and other steel products were seen as an alternative to wood design. Hangars were used to house and repair jet aircraft; McChord was finding it necessary to construct more of them because of the growing number of military aircraft stationed there. Photograph ordered by Bethlehem Pacific Coast Steel Corporation.

Bethlehem Pacific Coast Steel Corp. (Seattle); Building construction; Progress photographs; Steel; Hangars;

Workers appear to be trudging uphill on top of a new hangar in a November 18, 1954, photograph. They had been working for months on constructing new steel hangars for the military on McChord Field. These hangars would be used to house and repair jets. The two men shown here are carrying sections of aluminum to be used to cover the roof of the new hangar. The Seattle District Corps. of Engineers, U.S. Army, designed the hangar and supervised its construction. All steel for the framework was fabricated by the Seattle plant of Bethlehem Pacific Coast Steel and the framework itself had been erected by the company's steelworkers. Photograph ordered by Bethlehem Pacific Coast Steel Corporation. (TNT 12-26-54, C-11)

Bethlehem Pacific Coast Steel Corp. (Seattle); Building construction; Progress photographs; Steel; Hangars;

Workmen balance high atop the roof of a new hangar at McChord Field on September 24, 1954. They are in the process of inserting steel sections. One of the building's sides is already in place. The hangars were used to house and repair aircraft and were apparently made basically out of steel components rather than wood. Photograph ordered by Bethlehem Pacific Coast Steel Corporation.

Bethlehem Pacific Coast Steel Corp. (Seattle); Building construction; Progress photographs; Steel; Hangars;

A Bethlehem Pacific Coast Steel Corporation crane is in the process of lifting another piece of steel roof truss as work continues on the construction of new hangars on McChord Field in September, 1954. Hangars were used to house and repair aircraft. It appears that instead of being constructed of wood, they were built using steel components. Photograph ordered by Bethlehem Pacific Coast Steel Corporation.

Bethlehem Pacific Coast Steel Corp. (Seattle); Steel; Hoisting machinery; Hangars; Building construction; Progress photographs;

Another view of construction of a new hangar on McChord Field was taken approximately September, 1954. Roof trusses and basic frame of the hangar appear to be in place at this time. A crane from Bethlehem Pacific Coast Steel Corporation carefully hoists steel components used in the building construction. Photograph ordered by Bethlehem Pacific Coast Steel Corporation.

Bethlehem Pacific Coast Steel Corp. (Seattle); Building construction; Progress photographs; Steel; Hangars;

On October 27, 1948, Permanente Metal Corporation employees, left to right, Charlotte Thorestad, C.P. (Pat) Love (plant manager) and Darlene O'Brien sat surrounded by a sea of iced cupcakes marked with a "P" and decorated with a single candle. Permanente's aluminum reduction plant at 2400 Taylor Way was celebrating its first year of production of Kaiser Aluminum with a "Family Day" Open House. Employees along with 1,500 friends, families and relations were the guests of management. They observed the step by step process of making aluminum and ate hot dogs cooked on a 500 lb. "pig" of aluminum, sandwiches, cupcakes and punch. The plant had been previously operated during World War II by the Olin Corporation. After its purchase by Kaiser, it became one of six aluminum plants operated by the company. The other plants were located at Mead and Trentwood Washington (near Spokane), Baton Rouge La., Newark Ohio and San Jose Ca. The Tacoma plant was permanently closed in 2002 and later demolished. (TNT 10/28/1948, p.1)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Employees--Tacoma--1940-1950; Baked products--Tacoma--1940-1950; Love, Charles P.; O'Brien, Darlene; Thorestad, Charlotte; Anniversaries--Tacoma--1940-1950;

Permanente's First Anniversary, Permanente Metals, Bill Gorman. A crowd of employees and their families watch James Condos, a caster at the plant, demonstrate pouring molten aluminum from a large ladle into a form for pig aluminum. More than 1,500 visitors crowded into the plant October 27, 1948, to celebrate the plant's first year of operation under Kaiser. They saw the step-by-step processes that went into making aluminum by touring the potrooms, rectifier stations, the machine shop, blacksmith shop and the casting room. (T.Times, 10/18, 1948, -.1)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Families--Tacoma--1940-1950; Anniversaries--Tacoma--1940-1950;

Permanente's First Anniversary, Permanente Metals, Bill Gorman. A family enjoys hot dogs during the celebration at Permanente on October 27, 1948. The older girl sits on a stack of aluminum pigs that have been produced at the plant. The woman holds a baby with one arm and her hot dog in her other hand. The weiners for the event were fried on one of the hot 500 pound pigs of aluminum at the plant. (T.Times, 10/28/1948, p.1)

Permanente Metals Corp. (Tacoma)--Employees; Aluminum industry--Tacoma--1940-1950; Laborers--Tacoma--1940-1950; Families--Tacoma--1940-1950; Frankfurters--Tacoma--1940-1950;

When the Rainier Steel Corporation began operations at 2201 Lincoln Avenue, on Tacoma's tideflats, in December of 1948 it became Tacoma's only steel plant at that time. Here an unidentified employee of Rainier Steel, in special safety glasses, monitors work being done in the facility. Eugene Cunningham, president and general manager, started the Rainier Steel Corporation because of the acute steel shortage after WWII. Rainier Steel used scrap iron as its raw material and their furnaces melted the iron and produced steel. The company planned to employ fifty people once they reached full operating capacity which was 100 tons daily with the present equipment. The steel was sent to Detroit for use in the automotive industry. (T. Times, 12/13/48, p. 5-article).

Foundries--Tacoma; Founding--Tacoma; Iron & steel workers--Tacoma; Steel; Steel industry--Tacoma; Hoisting machinery; Industrial facilities--Tacoma; Furnaces--Tacoma; Rainier Steel Corp. (Tacoma);

The first steel plant in Tacoma opens on December 3, 1948, at 2201 Lincoln Avenue, on the tideflats. Rainier Steel Corporation's owner, President and General Manager is Eugene Cunningham. View of Phil E. Haglund (left) and Eugene Cunningham standing by the furnace on the first day of operations at Rainier Steel Corporation (T. Times, 12/13/48, p. 5).

Foundries--Tacoma; Founding--Tacoma; Iron & steel workers--Tacoma; Steel; Steel industry--Tacoma; Industrial facilities--Tacoma; Furnaces--Tacoma; Rainier Steel Corp. (Tacoma);

The Rainier Steel Corporation is the first company in Tacoma and in this regional area of its kind. The steel produced is being used to manufacture automobiles, company representatives stated the automobile companies are offering the best prices for their products. View of steel workers watching the first pouring of steel at Rainier Steel Corporation (T. Times, 12/13/48, p. 5).

Foundries--Tacoma; Founding--Tacoma; Iron & steel workers--Tacoma; Steel; Steel industry--Tacoma; Industrial facilities--Tacoma; Furnaces--Tacoma; Rainier Steel Corp. (Tacoma);

Rainier Steel Corporation was incorporated in July 1948, the first steel was poured on December 3, 1948; the incorporated value of the plant is $200,000. The plant is only operating at 50%, at this time, the full capacity of the plant will be 100 tons per day. This Tacoma industry is helping fill the demands of the national steel shortage, most of the steel produced in Tacoma is being sold to automobile companies in Detroit, Michigan. View of unidentified steel worker checking the controls on the equipment (T. Times, 12/13/48, p. 5).

Foundries--Tacoma; Founding--Tacoma; Iron & steel workers--Tacoma; Steel; Steel industry--Tacoma; Industrial facilities--Tacoma; Rainier Steel Corp. (Tacoma);

Exterior to be used for letterhead, Steel, Steel & Steel, Inc., Mr. Ray. The company's window advertises that they have been realtors since 1920. David C. Steel was the president and manager of the company. William S. Steel served as secretary. Walter C. Steel Company was located at the same address and was headed by W.C. Steel. This night-time view of the offices includes window displays of current listings as well as the office fixtures and furnishings. TPL-8209

Steel Steel Steel, Inc. (Tacoma); Walter C. Steel, Inc. (Tacoma); Offices--Tacoma--1940-1950; Storefronts--Tacoma--1940-1950; Window displays--Tacoma--1940-1950; Real estate business--Tacoma;

Northwest Hauling, view of crane at Tacoma Smelter, Mr. Don Cooney. The crane is seated on a trailer pulled by a large truck cab. It is used to lift trusses and materials to the construction crew at upper levels of the new building at ASARCO.

American Smelting & Refining Co. (Tacoma); Northwest Hauling Co. (Tacoma); Hoisting machinery; Smelters--Tacoma--1940-1950; Building construction--Tacoma--1940-1950;

Rainier Steel would use scrap iron as their raw resource in producing steel. The plant began producing steel on December 3, 1948, they were the first steel plant in Tacoma. The plant would employ about 50 people, when they reached full operations, which would help build the payrolls in Tacoma industries. Aerial view of Rainier Steel Corporation, located between Blair Waterway and Hylebos Waterway on Lincoln Avenue.

Steel industry--Tacoma; Steel; Foundries--Tacoma; Waterfronts; Industrial facilities--Tacoma; Aerial photographs; Aerial views; Rainier Steel Corp. (Tacoma);

Rainier Steel Company had just started operating in the steel industry in Tacoma, this company was the only one of its type in this regional area. Rainier would be producing and selling their steel to automobile companies in Detroit, Michigan. Eugene Cunningham was the President of Rainier Steel Corporation, the plant facilities were located at 2201 Lincoln Avenue in Tacoma's tideflats area, between Blair Waterway and Hylebos Waterway.

Steel industry--Tacoma; Steel; Industrial facilities--Tacoma; Foundries--Tacoma; Aerial photographs; Aerial views; Rainier Steel Corp. (Tacoma);

Four tall smokestacks on an industrial building.