Progress photographs of St. Regis Paper Co. expansion taken on August 11, 1960, on behalf of Malcolm McGhie, industrial consultant, New York. Long general view of machine room taken from balcony on north end. The machine room was enlarged at the Kraft paper and board mill located in the Tideflats during a twenty million dollar expansion scheduled for 1960-61. A new paper machine would be added by year's end which would increase and diversify the Tacoma mill's paper and board capacity. (1960 Annual Report, p. 6, 7)

St. Regis Paper Co. (Tacoma)--1960-1970; Progress photographs; Machinery;

A Veneer Chip Transport Kenworth truck and trailer, indicating capacity weight of under 36,000, is parked outside the St. Regis plant on Portland Avenue on April 11, 1960. The photograph would be used for advertising. Photograph ordered by Kenworth Motor Truck Co., Seattle.

Trucks--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970;

Western Gear Corporation of Seattle installed new machinery at St. Regis Paper Co. Tacoma plant on October 13, 1961. View of machine with mountain of pulp-mill chips in background. The kraft mill stored outdoors piles of the chips, most of them purchased from local plywood and sawmills.

Machinery; Western Gear Corp. (Seattle); St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970;

The Samuel M. Langston Co. of Camden, N.J., made equipment for the corrugated container industry for over 100 years. View of Langston machinery at the St. Regis Paper Co. plant in September, 1961; machines may include the counter roll rewinder and/or shaftless rewind stand. Large roll of kraft paper on Langston machine. Northern Pacific boxcars conveniently located in rear of picture. Photograph ordered by the Samuel M. Langston Co.

Machinery; Paper industry--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970; Railroad freight cars--Tacoma;

St. Regis Paper Co. employee leans over a Langston machine on September 29, 1961. Man appears to be working with small roll of kraft paper. The Samuel M. Langston Co. made machines, basically rewinders, for the corrugated container industry. Based in Camden, N.J., they were in operations for more than one hundred years. Photograph ordered by the Samuel Langston Co.

Machinery; Paper industry--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970;

Chip feeding operation at St. Regis Paper Co. 's Tacoma plant. Mounds of wood chips blanket the area. St. Regis allowed storage of pulp-mill chips outside its kraft mill location. Sulphate pulp is one of the products made from chips made out of waste wood. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

View of outdoor chip feeding section of St. Regis Paper Co. plant in Tacoma, May, 1961. The low covered structure may have housed wood chips. Machinery in background was probably used to transport the chips. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

Chip feeder in operation at St. Regis Paper Co. May, 1961, photograph of one of the chip feeders on wheels employed at the St. Regis Paper Co. plant in Tacoma. Pounds of wood chips accumulate on wooden shelf. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

July, 1961, saw the installation of a Fibre Making Processes, Inc., barking drum at the Tacoma St. Regis Paper Co. plant. The 12' x 67.5' drum tumbles logs or billets by mechanical rotation which strips the bark using abrasive action. Photograph ordered by Fibre Making Processes, Inc., Chicago, IL.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

View of bark conveyer at St. Regis' Tacoma plant. One small log is resting on side of conveyer belt. Fibre Making Processes, Inc., had its 12 foot barking drum installed in early July, 1961. Photograph ordered by Fibre Making Processes, Inc., Chicago.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

The discharge end of a new Fibre Making Processes, Inc., barking drum with view of discharge gate and cut small logs; barking drum located at St. Regis Paper Co.'s Tacoma plant. The bark would be removed by abrasive action of the rotating mechanical drum. Photograph ordered by Fibre Making Processes, Inc., Chicago.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

View of enlarged machine room in the St. Regis Paper Co.'s kraft paper and board mill on November 28, 1960. This progress photograph was taken on behalf of Malcolm McGhie, industrial consultant from New York City, for possible use in St. Regis' 1960 Annual report. A new paper machine was being erected in 1960 which would increase and diversify Tacoma's paper and board capacity. (St. Regis 1960 Annual Report, p. 7)

St. Regis Paper Co. (Tacoma)--1960-1970; Progress photographs; Machinery;

St. Regis Paper Co. president and CEO William R. Adams stands next to enormous rolls of (kraft) paper on June 15, 1965, during a visit to the company's Tacoma plant. Adams, of New York, was in Tacoma along with Chrm. of the Board Roy Ferguson for dedication ceremonies commemorating the grand opening of the company's new $5,000,000 veneer plant and studmill. He would speak to 400 invited guests at a luncheon held at the plant site. Photograph ordered by St. Regis Paper Co., New York. (TNT 6-16-65, p. 1)

St. Regis Paper Co. (Tacoma)--1960-1970; Adams, William R.;

Informal portrait of St. Regis Paper Co. president and CEO, William R. Adams. Mr. Adams paid a visit to the company's Tacoma plant in mid-June, 1965. He stands with his arms crossed near rolls of (kraft) paper. He and Chairman of the Board Roy Ferguson were present for the dedication of St. Regis' new veneer plant and studmill. The new studmill had an annual capacity of 40 million board feet. The veneer plant used peeler logs for its plywood plants in Tacoma and Olympia. Photograph ordered by St. Regis Paper Co., New York. (TNT 6-16-65, p. 1)

St. Regis Paper Co. (Tacoma)--1960-1970; Adams, William R.;

1973 Richards stock footage. Aerial view in July of 1973 of the St. Regis Paper Co. The Puyallup Waterway is directly behind the plant. Due to St. Regis' vigorous efforts to curtail pollution, there is no sign of the plant's usual massive smoke emissions. TPL-5484

St. Regis Paper Co. (Tacoma)--1970-1980; Aerial views; Puyallup Waterway (Tacoma);

Western Gear at St. Regis plant. A view of two large pieces of machinery used in paper manufacturing at the new Kraft paper plant of St. Regis manufactured by Pusey-Jones Corporation, Wilmington, Delaware.

St. Regis Paper Co. (Tacoma)--1940-1950; Paper industry--Tacoma--1940-1950; Machinery;

The new paper mill and paper production at St. Regis in Tacoma has helped the company strengthen its position in pulp, kraft paper, kraft board and multiwall bags. Interior view of St. Regis paper plant, machinery used during the paper production process; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis was making kraft paper in six of their mills, they manufactured about 360,000 tons of kraft paper per year. Tacoma was the newest kraft paper producing mill; paper production began January 5, 1949. Interior view of St. Regis plant, control panels with gauges and dials monitor the plant's productivity; photo ordered by General Electric Company, machinery and equipment manufacturers.

Paper industry--Tacoma; Machinery; Industrial facilities--Tacoma; Control rooms--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);

St. Regis was able to broaden their range of products and increase production capacity by enlarging their Tacoma plant and beginning the production of kraft paper. Interior view of St. Regis plant, Ederer cranes with 24 ton capacity are being used in paper mill. Photo ordered by Ederer Engineering Company, cranes, hoist and veneer machinery manufacturers based out of Seattle, Washington.

Paper industry--Tacoma; Hoisting machinery; Pulleys; Equipment; Machinery industry--Tacoma; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Ederer Engineering Co. (Seattle);

The St. Regis laboratories were conducting various types of research related to the pulp and paper industry. In 1949, they were focusing in an extensive program connected with pulping, new paper coatings, and new paper products. The laboratories helped maintain high levels of quality control. View of unidentified men in research and testing area at Tacoma's St. Regis plant. (S5)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

St. Regis has been expanding and improving their facilities and plants throughout the world based on research being conducted in their Research and Development Departments. The company's laboratories are ranked among the highest in the paper and pulp industry. View of unidentified men in research and testing area in Tacoma's St. Regis plant in this photograph dated January 21, 1949. (S4)

Paper industry--Tacoma--1940-1950; Product inspection--Tacoma; Testing--Tacoma; Research facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Two workers are pictured unloading a roll of Kraft paper to join others already stored in St. Regis' paper storage room. St. Regis had began producing paper in January of 1949 as it used the most modern equipment available at the time to convert liquid pulp into heavy multiwall Kraft paper. The plant was able to produce about 240 tons of multiwall bag paper per day.

Paper industry--Tacoma--1940-1950; Paper; Hoisting machinery; Machinery; Equipment; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Interior view of St. Regis, view of paper producing machinery, two unidentified laborers are working with what appears to be a large roll of kraft paper, "Ederer Engineers" crane is being used, this machine was manufactured in Seattle. Photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Interior view of St. Regis; view of Tacoma mill's new high speed kraft paper machine, it is designed to operate at 2,000 feet per minute and produce paper nearly fourteen feet wide, unidentified man is standing by the machine. Photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Kraft paper is produced in the following plants: East Pepperell, Massachusetts; Watertown, New York; Carthage, New York; Herrings, New York; Oswego, New York; Pensacola, Florida; and Tacoma, Washington. The other plants produce other items such as: Multiwall bags, Kraft pulp, and other types of specialty and coated papers. Interior view of St. Regis, view of paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

St. Regis' first mill was located at Deferiet, New York, this mill has been kept modern and enlarged in order to ensure high levels of productivity. Interior view of St. Regis in Tacoma and paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

The Tacoma plant is thoroughly up to date in the paper making equipment, the auxiliaries and the new mill building itself; Tacoma's St. Regis is one of the most modern in the country. Interior view of St. Regis, paper producing machinery; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

A new hydraulic barking and chipping plant was completed and began operating in 1948 at the Tacoma plant, this was one of the new buildings built in the expansion project. View of machinery used during the "wet end" paper producing process; photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

In 1930 St. Regis purchased a kraft pulp mill in Tacoma, they spent many years modernizing and expanding the company's facilities. In January 1949 the Tacoma mill began making paper, the company had previously only manufactured and sold pulp and multiwall bags. View of machinery manufactured by Pusey & Jones, photo ordered by Pusey & Jones Corporation, a machinery manufacturer from Wilmington, Delaware.

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; Pusey & Jones Corp. (Tacoma);

Interior view of plant, large rolls of paper are being processed after going through the "wet end" machine, they are at the pre-dryer stage. The paper then goes through a "Flakt air dryer" prior to being cut, baled, packaged and distributed. View of General Electric machinery; photo ordered by General Electric Company, machinery and equipment manufacturers. TPL-6811

Paper industry--Tacoma--1940-1950; Paper--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950; General Electric Co. (Tacoma);