Ferry "Wollochet" docked at the Skansie's Shipbuilding Co.'s dock on November 12, 1926. It had been built by the Gig Harbor firm the previous year. TPL-680; G37.1-171

Ferries--1920-1930; Skansies Shipbuilding Co. (Gig Harbor); Boat & ship industry--Gig Harbor; Piers & wharves--Gig Harbor;

In November of 1926, the workmen at Skansie Shipbuilding Company posed with the two ferries that they were building in their ways in Gig Harbor. The smaller ferry boat at the left, the "City of Steilacoom", was nearing completion. The larger boat was being built for the Tacoma-Gig Harbor run and would carry up to 75 cars. A larger ways had been built to accommodate the increased size of the ferry. It was scheduled to be launched between February 15 and March 15 and to be completed by April 15. The "City of Steilacoom" was the 12th boat finished by Skansie's since the first of the year. In 1926, the Skansie yard employed 36 workmen. (TNT 11/19/1926, pg. 10) BU 13893, Boland # B15944;

Ferries--1920-1930; Skansies Shipbuilding Co. (Gig Harbor); Boat & ship industry--Gig Harbor;

Employees of the Skansie Shipbuilding Company, in Gig Harbor, posed around a Fairbanks Morse engine intended for the "Defiance," the Pt. Defiance to Gig Harbor ferry which had been launched on January 16, 1927. By the mid 1920's, ferries were being designed to carry automobiles. The Skansie Brothers yard in Gig Harbor was one of the first to build the auto ferries. The "Defiance" had an 70-car capacity. Mitchell Skansie pioneered the use of diesel engines in ferries and the "Defiance" had a 360 hp engine which could travel with a speed of 10 knots. (Neal & Janus "Puget Sound Ferries") G66.1-091 (TNT 1-15-27, p. 14-article; TNT 1-17-27, p. 15-article)

Ferries--1920-1930; Skansies Shipbuilding Co. (Gig Harbor); Boat engines;

On display at the Union depot, 1717 Pacific Avenue, in early February of 1927 was the giant Great Northern electric locomotive #5007. It had made its way from East Pittsburgh, Pennsylvania to Washington State, a distance of 2600 miles. This unidentified group of men, some of the hundreds in attendance, took the opportunity to have their photograph taken with the latest "Iron Horse" before it left town. #5007 weighed in at 715,000 pounds and had an overall length of 94'4". G44.1-097; G44.1-069 (TNT 2-3-27, p. 14-article)

Railroad locomotives--Tacoma--1920-1930; Union Station (Tacoma);

Mayor Melvin G. Tennent and several Tacoma commissioners joined the hordes of Tacomans on February 2, 1927, in viewing the giant Great Northern electric locomotive #5007 on display at the Union depot. The latest and greatest "Iron Horse" had an overall length of 94'4" and a total weight of 715,000 pounds. It was built jointly by Baldwin Locomotive and Westinghouse Electric. A banner on the locomotive proclaimed it to be the "most powerful motor-generator electric locomotive ever built." It had traveled from East Pittsburgh, Pennyslvania to Skykomish, Washington, a distance of 2600 miles, hitched to the end of a through freight. After stops in Portland and Everett, it would be put into service. From L-R above are: Mayor Tennent (on steps), Commissioners Jesse Silver & Dyer Dyment, Commissioner Ira S. Davisson, and Llewellyn Evans, superintendent of City Light. The two men standing on the ground were not identified. (TDL 2-3-27, p. 12; TNT 2-3-27, p.14-article) G44.1-069; TPL-675; TPL-5813

Railroad locomotives--Tacoma--1920-1930; Mayors--Tacoma--1920-1930; Tennent, Melvin Green; Silver, Jesse; Dyment, Dyer; Davisson, Ira; Evans, Llewellyn; Municipal officials--Tacoma--1920-1930; Banners--Tacoma; Union Station (Tacoma);

On March 15, 1927, an unidentified logging crew at Camp #1 was taking a lunch break next to giant logs stacked and ready to be transported. Some of the men found that a cut log makes a fairly comfortable perch. Metal lunch pails were scattered around the area and there were clumps of snow visible. TPL-2445; G75.1-102

Loggers; Logs; Lumber industry--1920-1930; Eating & drinking;

The new Point Defiance to Gig Harbor ferry, "Defiance." The 180-foot wooden ferry constructed of Douglas fir, with a capacity of 70 cars, was built by the Skansie Shipbuilding Co. in Gig Harbor and started on her Gig Harbor run on April 3, 1927. She had her "builders trial test" the day before. The new ferry was designed to speed up traffic between Tacoma and the Gig Harbor peninsula. She was licensed to carry 500 foot passengers and 70 cars. Skansie Brothers was founded in 1912 by four Yugoslavian brothers, Pete, Mitchell, Andrew and Joe Skansie. Beginning in 1922, the company was one of the first yards to build automobile ferries. They also were pioneers in the use of diesel ferry engines. By 1926, Mitchell Skansie had also begun an early ferry service company called the Washington Navigation Co. It had taken over operation of all ferries in Pierce County on January 1, 1927. By the 1930's, the company had many ferries running on contracted routes in the south Puget Sound. (Neal & Janus "Puget Sound Ferries") TPL-8269; G66.1-101 (TNT 1-15-27, p. 14-article; TNT 1-17-27, p. 15-article; TDL 4-2-27, p. 1-article; TDL 4-3-27, A-11)

Ferries--1920-1930; Skansies Shipbuilding Co. (Gig Harbor);

This look at St. Paul & Tacoma Lumber Co.'s sprawling grounds was taken from the Puyallup Bridge on May 30, 1927. Col. Chauncey W. Griggs and associates had established one of Tacoma's first major sawmills located along Commencement Bay in 1888, one year before Washington became a state. Abundant sources of hemlock and Douglas firs were available for logging as St. Paul & Tacoma helped Tacoma become the "Lumber Capital of the World." One of the area's largest employers, St. Paul & Tacoma would eventually merge with St. Regis Paper Co. in 1957. (History of Pierce County, Vol. 1- pg. 10-11-article) TPL-3235; G36.1-134

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930;

Elevated 1927 view of what is believed to be the Tidewater Mill Co. facilities located on the east side of the Hylebos Waterway at the end of 11th St. The Hylebos Creek Waterway drawbridge is up to permit ships to pass under. Multiple log dumps are located near the plant and readily accessible. The Tidewater Mill Co. was established in 1918 and had a capacity of 100,000 logs per day. Because it fronted 750 feet of deep water, several ships were able to load cargo at the same time. TPL-6476; G9.1-043

Tidewater Mill Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Logs;

Log train headed for St. Paul & Tacoma Lumber Co. yards in July of 1927. Mount Tacoma (Rainier) in background. Many trees near the tracks have already been topped.

Logs; Lumber industry--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Rainier, Mount (Wash.);

In August of 1927, this photograph was taken for a brochure advertising the Chicago, Milwaukee and St. Paul Railroad locomotive class EP3, the largest and most powerful electric powered locomotive. The women leaning out of the windows wearing corsages were beauties from the Broadway Theater Review on loan to the railroad for the photograph. The automobile was a new Chrysler Imperial 80 sedan loaned by the American Automobile Association to transport the girls. The new Olympian was the most modern and luxurious transcontinental transportation around. It ran on roller bearings, eliminating lurching jerks on stopping and starting. The Milwaukee Road electrified transcontinental railroad ran from Tacoma & Seattle to Chicago, over 660 miles and across four mountain ranges. TPL-1359; G44.1-092 (TDL 8/7/1927, pg. G-5 alternate picture) (photocopy made for American Automobile on 10-8-27)

Railroad locomotives--Tacoma; Railroad cars--Tacoma; Railroads--Tacoma; Chrysler automobile; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma);

Chicago, Milwaukee and St. Paul Railroad, Engine #10250. The electric bipolar Class EP2 locomotives, manufactured by Alco-GE, were put in service from Othello to Tacoma in 1920. They performed beyond all expectations, with great economy and low maintenance, surviving until they were scrapped in the 1960s. TPL-2377; G44.1-087

Railroad locomotives--Tacoma; Railroad cars--Tacoma; Railroads--Tacoma; Chicago, Milwaukee & St. Paul Railroad Co. (Tacoma);

Truss section manufactured by the Ernest Dolge, Inc., lumber company, shown at unidentified construction site in March of 1928. Ernest Dolge, Inc., had a national reputation for producing special "structual" grades of wood. This truss section was strongly bolted together. The Dolge firm was located on the Belt Line at approximately 1800 Taylor Way in the Tideflats, occupying 16 acres on the Hylebos Waterway. Their sawmill produced timbers for boats, beams, and even fire extension ladders that used Douglas fir. The Dolge mill cut 80,000 feet of timber daily and employed 55 men with a yearly payroll of nearly $100,000. G36.1-125 (TDL 4-10-28, Section 3, Industrial section, p. 1, 8-articles)

Ernest Dolge, Inc. (Tacoma); Lumber industry--Tacoma--1920-1930; Trusses--Tacoma;

Steel-framed warehouse building, St. Regis Kraft Co at 801 Portland Ave, Tacoma.

Industries; St. Regis Kraft Co.; Tideflats; Paper industry; Lumber;

Two employees, believed to be Bert Sweeting and Robert Stone, of the (then) Royal Ice Cream Co. are pictured in the company's laboratory on April 18, 1928. Mr. Sweeting, head bacteriologist, is peering into a microscope while his assistant, Mr. Stone, is examining the contents of a tube. The ice cream company had moved into new quarters at 2413-21 Pacific Avenue just six months before. It had announced plans to merge with the Producers Dairy in March of 1928 and would operate under the new name of Medosweet Dairies, the name chosen in a contest won by 9-year-old Jack Richards. Medosweet had installed this laboratory, the first in Tacoma of its kind, to guarantee the highest quality of its ice cream, milk, cream, buttermilk and cottage cheese. The laboratory would use the most modern equipment to assure purity and meet exacting standards. (TDL 3-22-28, p. 3-ad; TNT 4-15-28, p. 14-ad; TNT 5-1-28, p. 2-article on lab; TNT 6-4-28, p. 5-article) G34.1-144

Royal Ice Cream & Milk Co. (Tacoma); Laboratories--Tacoma--1920-1930; Dairy products industry--Tacoma--1920-1930; Medosweet Dairies, Inc. (Tacoma)--Employees;

Unidentified machinery at St. Paul & Tacoma Lumber Co.'s new mill, as photographed on June 12, 1928. Established in 1888, the company would merge with St. Regis Paper in 1957.

Machinery; St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930;

On June 13, 1928, two unidentified workers posed with an acetylene torch at St. Paul & Tacoma Lumber Co.'s new mill. The mill in question is believed to be the new sawmill for cutting hemlock logs built in the Tideflats on the site of the old Foundation shipyards near the Union Bag & Paper Corporation pulp mill still under construction. The sawmill would begin operations on June 18th. G35.1-082 (TNT 6-15-28, p. 10-article)

Welding--Tacoma--1920-1930; St. Paul & Tacoma Lumber Co. (Tacoma); Sawmills--Tacoma--1920-1930;

Interior of new St. Paul & Tacoma Lumber Co. mill as viewed on June 15, 1928. This is believed to be the new sawmill used to cut hemlock logs built in the Tideflats north of E. 11th St., part of a joint venture between the Union Bag & Paper Corporation (N.Y.) and St. Paul & Tacoma Lumber. The mill, opening on June 18, 1928, was built on the site of the old Foundation shipyards. It contained modern new machinery including a new Yates planer, 72 x 14-inch edger, 48 x 16-inch Diamond gangsaw, 9-foot Diamond band saw, 7-foot resaw and two mechanical saw trimmers. In addition, the mill had a new hammerhead crane which was capable of lifting 7 1/2 tons. G36.1-150 (TNT 6-15-28, p. 10-article)

St. Paul & Tacoma Lumber Co. (Tacoma); Lumber industry--Tacoma--1920-1930; Sawmills--Tacoma--1920-1930;

Defiance Lumber Co. plant and stacks, as photographed on June 19, 1928, for a court case. Photograph also includes hill and tracks. The court case possibly involved a $10,000 claim in superior court whereby an individual charged that smoke and refuse from the lumber company's stacks was so heavy that it was a nuisance when the wind blew from the north or northeast. G36.1-117

Defiance Lumber Co. (Tacoma); Smokestacks--Tacoma--1920-1930;

Defiance Lumber Co. facilities, including smokestack and railroad tracks, and neighboring hillside as viewed on June 19, 1928. This scene was photographed for a court case that may have involved pollution claims against the company. G36.1-056 (for another view of smokestack see Boland photograph B18783)

Defiance Lumber Co. (Tacoma); Smokestacks--Tacoma--1920-1930; Railroad tracks--Tacoma--1920-1930;

Crew at a Enumclaw, WA lumber yard demonstrates the use of a Star Iron & Steel built lumber carrier.

Industries; Star Iron & Steel; Lumber; Enumclaw;

A lumber carrier built by Star Iron & Steel hard at work in a lumber yard in Enumclaw, WA.

Industries; Star Iron & Steel, Lumber, Enumclaw

Star Iron & Steel built lumber carrier at work in a lumber yard in Enumclaw, WA.

Industries; Star Iron & Steel; Lumber; Enumclaw;

This photograph of trains of logs on and along Northern Pacific Railway tracks with Northern Pacific boxcars adjacent to the logs was taken in March of 1929. It was later used in a News Tribune article dated October 20, 1930 to help bolster Tacoma's claim to be "the lumber capital of the world." Great trains of logs like these were brought to Tacoma's mills for cutting into lumber before being sent out to the world. More than 80 Tacoma mills converted lumber into finished products. 21 local furniture-making factories used Tacoma lumber to built tables, chairs and all manner of wood products. Tacoma had led the nation in lumber production since 1905. TPL-1542; G44.1-114 (TNT 10-20-30, 4-B)

Logs; Shipping--Tacoma--1920-1930; Northern Pacific Railway Co. (Tacoma); Railroad tracks--Tacoma--1920-1930; Lumber industry--Tacoma--1920-1930;

Hooker locomotive. A Hooker Electrochemical Co. locomotive pulling four storage tanks paused on tracks on October 14, 1929. Hooker opened in February of 1929 and aided the Northwest pulp and paper industry by producing chemicals necessary for operations. It became one of the area's largest chemicals companies and underwent several name changes until closure in the early 2000's. TPL-6604; G44.1-058

Hooker Electrochemical Co. (Tacoma); Chemical industry--Tacoma--1920-1930; Railroad tank cars--Tacoma--1920-1930; Railroad locomotives--Tacoma--1920-1930;

Interior of a Northern Pacific Railway Co. car as viewed on December 5, 1929. The doors are partially open. The railroad car had at least two windows. G44.1-112

Northern Pacific Railway Co. (Tacoma); Railroad cars--1920-1930;

Pierce County Airport, Lakewiew (now Lakewood) Wa. Steel hangar designed and developed by Star Iron & Steel.

Industries; Star Iron & Steel; Airports; Construction;

Aerial view of the Gange Lumber Company mill at 3939 Ruston Way, WA.

Industries; Gange Lumber Company; Aerial photographs; Lumber; Ruston Way

Gange Lumbar Company's crane at 3939 Ruston Way, Tacoma.

Industries; Gange Lumber Company; Lumber; Cranes; Ruston Way;

Three unidentified Medosweet employees are pictured on March 25, 1930, in the bottling section of the large plant located at South 25th & Pacific Avenue. Bottles are in the process of being filled with pure, fresh milk. Milk travels from the pasteurization plant to the bottling machines where the bottles are filled and capped without being touched by human hands. 35 trucks will deliver over 20,000 bottles of milk, cream and buttermilk to Tacoma homes daily. Medosweet Dairies prided itself in guaranteeing the highest quality of milk, cream, ice cream, buttermilk and cottage cheese by upholding and improving sanitary standards. G6.1-072 (TDL 4-29-30, p. 8; TDL 4-29-30, p. 5, section 3-Ad )

Medosweet Dairies, Inc. (Tacoma); Dairy products industry--Tacoma--1930-1940; Conveying systems--Tacoma--1930-1940; Bottles; Milk;