Progress photograph of steelwork at St. Regis Paper Company. The new multiwall bag plant, adjoining the paper mill, was to replace a leased plant at Seattle. The plant was expected to be in operation before April 1, 1952. It would employ approximately 400 people, including a large percentage of women. (St. Regis Annual Report 1951)

Paper industry--Tacoma--1950-1960; Progress photographs; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1950-1960; Building construction--Tacoma--1950-1960;

St. Regis had been expanding their facilities for many years, the company had added new buildings and had recently begun the mass production of paper in Tacoma. St. Regis began producing paper in January 1949; the paper mill was converting the liquid pulp into heavy multiwall Kraft paper, using the most modern equipment available. Interior view of plant and new roll grinding machine.

Paper industry--Tacoma--1940-1950; Mechanical systems--Tacoma; Machinery; Machinery industry--Tacoma--1940-1950; Industrial facilities--Tacoma; St. Regis Paper Co. (Tacoma)--1940-1950;

Link Belt equipment at St. Regis. The large rolls of paper are moved by a conveyer belt arrangement made up of lots of little rollers. It appears that the rolls of paper are rolled onto the belt when flat. The belt then uprights the paper and transports it. One man operates the machinery, while another stands to the rear with 2 more rolls of paper for loading.

St. Regis Paper Co. (Tacoma)--1950-1960; Mills--Tacoma--1950-1960; Paper industry--Tacoma--1950-1960;

Paper and pulp production at the R.W. Paper Co. in Longview, Wa. A worker controls the amount of liquid pouring on the rollers by means of a valve, as part of the pulp manufacturing process. Wood is composed of cellulose fibers that are cemented together with a substance called lignin. To transform wood into pulp, the fibers must be separated. This separation is done using either a mechanical or a chemical process. Wood is cooked in huge vats with chemicals. The combined actions of heat and the chemicals dissolve the lignin. The pulp is then bleached, using chemicals that make it not only whiter but also more resistant and absorbent. Photographs ordered by Malcolm McGhie.

R. W. Paper Co. (Longview); Paper industry--Longview--1950-1960;

Pulp manufacturing process at the R.W. Paper Co. in Longview, Wa. A pipe pours hot liquid into this vat, forming a steaming cauldron at this stage of the pulp making business. Chemicals and steam are being used to separate the fiber from the lignin, the material that binds it together. Photographs ordered by Malcolm McGhie.

R. W. Paper Co. (Longview); Paper industry--Longview--1950-1960;

Paper quality control testing at R.W. Paper Co. in Longview, Wa. The technician appears to be measuring by stopwatch how quickly the ink blots spread on the paper samples. Photographs ordered by Malcolm McGhie.

R. W. Paper Co. (Longview); Paper industry--Longview--1950-1960; Product inspection--Longview; Testing--Longview;

Pacific Waxpaper Co., photograph ordered by Malcolm McGhie. This factory is processing paper for Scot Tissue. The machinery in the back is rolling the paper on huge rolls with the Scot log printed on the outside. The man to the left is operating what appears to be cutting machinery. The two women are wrapping the paper for shipment. In the front of the picture are large stacks of uncut paper measuring 4 squares by 4 squares; they are then cut into shipment size of 2 squares by 1. Scot distributed a number of household paper products. The paper carries the disclaimer, "New. Now even softer."

Paper industry--1950-1960; Pacific Waxpaper Co.; Scot Tissue;

St. Regis Paper Co.- dinner meeting. Kenneth D. Lozier, vice president in charge of promotion and advertising, points out the importance of "awareness of opportunity" and "selling all the way through" as factors in the rapid growth of all five divisions of the St. Regis Paper Co. during a dinner speech to the Sales Executive Club of Tacoma at the Winthrop Hotel. Paper production was the fifth largest industry in the American economy. The Tacoma plant manufactured kraft, pulp, paper and board and multiwall paper bags. Other Northwest plants were located at Vancouver, Los Angeles, San Leandro and Emeryville, Ca. Tacoma pioneered the utilization of wood chips, formerly a waste product of sawmills, in the production of pulp. St. Regis was in the forefront in selling the use of paper as a wrapping product for food and dairy. (TNT 2/8/1955, pg.7)

St. Regis Paper Co. (Tacoma)--1950-1960; Paper industry--Tacoma--1950-1960; Lozier, Kenneth D.; Hotel Winthrop (Tacoma);

This huge condenser was one of a pair fabricated in the Birchfield Boiler shops, at 2503 E. 11th St., for installation in the St. Regis plant. Each condenser, the largest ever built in Tacoma and among the largest built in the Northwest, weighed more than 15 tons. They were manufactured of stainless steel and were 22 feet long and 6 feet high. Each was valued at $25,000. The condensers were used to recover waste heat from the pulp digesters. (TNT 3/13/1955, pg. B-17)

Birchfield Boiler, Inc. (Tacoma); Boilers; Boiler industry--Tacoma; Paper industry--Tacoma--1950-1960;

In July of 1954 two Blake, Moffitt & Towne delivery trucks were photographed while being loaded with paper products in the company's new warehouse at 1157 Thorne Road. The new building had wooden ramps that made it possible for the trucks to back into the loading area, under cover and out of the wind and weather. Blake, Moffitt & Towne, one of the oldest paper and stationary companies on the west coast, opened in Tacoma in 1943 when they took over the Tacoma Paper Company. The Tacoma division was one of sixteen units the company maintained in six western states. They closed their warehouse in Tacoma around 1971. (TNT 7-18-54, C-15)

Blake, Moffitt & Towne, Inc. (Tacoma); Paper industry--Tacoma--1950-1960; Warehouses--Tacoma--1950-1960;

Modular home on display. The "MODS" modular home manufactured by the St. Regis Paper Co. was divided into three sections. Here a crane has carefully lowered one section onto the cement parking lot behind the University of Puget Sound Fieldhouse. One more modular home would be placed on display for thousands of Tacomans to inspect as part of the 24th annual Tacoma Home Show. Photograph ordered by St. Regis Paper Co.

St. Regis Paper Co. (Tacoma)--1970-1980; Prefabricated houses; Hoisting machinery;

A Veneer Chip Transport Kenworth truck and trailer, indicating capacity weight of under 36,000, is parked outside the St. Regis plant on Portland Avenue on April 11, 1960. The photograph would be used for advertising. Photograph ordered by Kenworth Motor Truck Co., Seattle.

Trucks--Tacoma--1960-1970; St. Regis Paper Co. (Tacoma)--1960-1970;

St. Regis timber operations in Mineral forest stand, August 2, 1960. Clear cutting is evident in this section of Mineral forest owned by the St. Regis Paper Co. Stumps and pieces of fallen timber are scattered amidst the knee-length grass. Photograph ordered by Malcolm McGhie, industrial consultant, New York.

Tree stumps; Clearing of land; Trees; St. Regis Paper Co. (Mineral);

July, 1961, saw the installation of a Fibre Making Processes, Inc., barking drum at the Tacoma St. Regis Paper Co. plant. The 12' x 67.5' drum tumbles logs or billets by mechanical rotation which strips the bark using abrasive action. Photograph ordered by Fibre Making Processes, Inc., Chicago, IL.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

ca. 1961. St. Regis lumber operations, Klickitat. Timber is being loaded onto a yellow truck for transport. This is probably pine as the company's Klickitat mill produced ponderosa pine exclusively. (scan from original negative, no print on file)

St. Regis Paper Co. (Klickitat); Lumber industry--Klickitat;

ca. 1961. Timber being loaded onto truck at St. Regis Paper Co.'s Klickitat forest lands circa 1961. Company mill there would turn the pine logs into lumber for shipment. That particular mill produced ponderosa pine exclusively. The pine would be used for millwork, interior finish, and residential and light commercial buildings. (scan from original negative, no print on file)

St. Regis Paper Co. (Klickitat); Lumber industry--Klickitat; Hoisting machinery;

Chip feeding operation at St. Regis Paper Co. 's Tacoma plant. Mounds of wood chips blanket the area. St. Regis allowed storage of pulp-mill chips outside its kraft mill location. Sulphate pulp is one of the products made from chips made out of waste wood. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

View of outdoor chip feeding section of St. Regis Paper Co. plant in Tacoma, May, 1961. The low covered structure may have housed wood chips. Machinery in background was probably used to transport the chips. Photograph ordered by Improved Machinery, Inc.

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970; Machinery;

Several men have stopped to take a coffee break overlooking Kapowsin Lake during the summer of 1963. One man appears to be taking the group's picture, perhaps unaware that he himself is also being photographed by the Richards Studio photographer. St. Regis Paper Co. had formerly used the lake to sort and store logs. By changing to a new 35-acre dry-land log-sorting and storage yard in Kapowsin, St. Regis freed the lake for fuller recreational use by the public. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (1964 St. Regis Annual Report, p. 25)

Lakes & ponds--Kapowsin; Kapowsin Lake (Wash.); St. Regis Paper Co. (Kapowsin);

Modern logging operations, St. Regis property in Kapowsin. St. Regis Paper Co. was gradually reducing its usage of the traditional wooden spars in favor of tall steel masts. These portable spars used the same basic principles of high-lead logging whereby powerful winches hauled in logs by cables rigged from the spar. However, the new steel spar could be set up and in operation within 2 1/2 hours of its arrival at a logging site in contrast with the 3+ days a wooden spar would take to set up and rig with steel cables and guy lines. In the above July, 1966, photograph, a portable tower is collapsed from its 110 feet height and ready to move to a new location where it can once again be set up in much less time than a wooden spar. By the end of 1967, St. Regis expected to have nine mobile spars operating in Washington. (St. Regis Midwesterner, May, 1967, p. 3)

St. Regis Paper Co. (Kapowsin); Lumber industry--Kapowsin--1960-1970;

ca. 1964. Majestic Mount Rainier peers over massive timber reserves for St. Regis Paper Co. in this ca. 1964 photograph. These great stands of timber in the foothills of the mountain are included in the Kapowsin Tree Farm which adjoins the western boundary of Mount Rainier National Park. The timber is mostly old-growth Douglas fir and hemlock. They will furnish raw material required by St. Regis' manufacturing operations in Tacoma. (1964 St. Regis Annual Report, cover, p. 1)

St. Regis Paper Co. (Kapowsin); Lumber industry--Kapowsin--1960-1970; Forests--Kapowsin; Rainier, Mount (Wash.);

October, 1967, scenes from Potlatch Forests' Lewiston, Idaho, plant. A Potlatch employee grabs ahold of a long plywood board in the Lewiston, Idaho, plant. The edge of the board, as those of others stacked nearby, are marked "pfi" and "quality," "made in the USA." Photograph ordered by Malcolm McGhie, industrial consultant, New York, for the 1967 Potlatch Forests annual report.

Plywood; Potlatch Forests, Inc. (Lewiston, ID); Paper industry--Idaho--1960-1970; Lumber industry--Idaho--1960-1970;

Scenes from Potlatch Forests pulp and paper operations. Interior of Potlatch Forests, Inc., paper plant shows two men at work handling paper products. Small rolls of what appear to be toilet paper emerge on a conveyor belt. A large roll of paper is apparently in the process of being wound. Photograph ordered by Malcolm McGhie, industrial consultant, New York, for company report. TPL-3856

Paper industry--Idaho--1960-1970; Potlatch Forests, Inc. (Lewiston, ID);

A rail car full of wood chips pours into an outdoor receptacle on September 16, 1965. This photograph, taken on behalf of Malcolm McGhie, New York industrial consultant, was probably taken at St. Regis Paper Co.'s Tacoma plant. The plant would receive purchased chips and proceed to unload them rapidly using this 60-foot car which could hold 70 tons. St. Regis would haul these chips to Tacoma from their sawmills in Montana. (1965 St. Regis Annual Report, p. 8)

St. Regis Paper Co. (Tacoma)--1960-1970; Paper industry--Tacoma--1960-1970;

A small boy appears to be probing at one end of a cut log at St. Regis' Kapowsin facility on November 2, 1965. He is dwarfed by the size of the numerous logs stacked before him. The young logger-to-be is wearing knee-high boots, suspenders supporting his trousers and a striped shirt. A book is carried and held open by his thumb, perhaps to make notations regarding the cut logs. Photograph ordered by Malcolm McGhie, industrial consultant, New York, for annual report.

St. Regis Paper Co. (Kapowsin); Logs; Boys;

This St. Regis Paper Co. stacker was capable of lifting 60 tons. In this November 29, 1965, photograph taken in the company's new Tacoma dry-land log-sorting and storage yard, the stacker picks up a full rail-car load at one time and transfers the logs to storage decks which are classified by species and grades. The new facility was created on the harbor front by filling in a saltwater log pond between the sawmill and the kraft mill. A 15-acre log-sorting and storage yard was established on the 35-acre new addition; an L-shaped veneer mill and a stud mill were also built adjacent to the yard. Photograph ordered by Malcolm McGhie, industrial consultant, New York. (1965 St. Regis Annual Report, p. 12-13)

St. Regis Paper Co. (Tacoma)--1960-1970; Logs; Hoisting machinery;

Copy of customer's negatives. This undated photograph was probably taken at St. Regis Paper Co.'s Tacoma offices. Several Japanese businessmen are pictured with two men believed to be St. Regis executives. Japan was a prime market for logs and wood products from the Pacific Northwest. Third man from the left is believed to be Katsumi Yasuda. Photograph ordered by St. Regis Paper Co. on February 8, 1974.

St. Regis Paper Co. (Tacoma); Guests--Tacoma--1970-1980;

Copy of customer's negatives. Undated photograph requested copied by St. Regis Paper Co.on February 8, 1974. Man believed to be a St. Regis executive displays a framed painting while several Japanese visitors stand nearby.

St. Regis Paper Co. (Tacoma); Paintings; Guests--Tacoma--1970-1980;

St. Regis Paper Company (Kraft Pulp Division) workers, overaged destroyer to be sunk in Commencement Bay for breakwater to protect St. Regis wharf. (T. Times)

Paper industry--Tacoma--1940-1950; St. Regis Paper Co. (Tacoma)--1940-1950; Scuttling of warships--United States;

Pacific Coast Association of Pulp and Paper Manufacturers banquet at the Winthrop Hotel.

Pacific Coast Association of Pulp & Paper Manufacturers (Tacoma); Hotel Winthrop (Tacoma);