For I.W. Johnson Engineering Company. An interior view of a sawmill near Packwood, Washington. Two men, difficult to discern from the large machinery, are in the upper left adjusting a log that is being broken down in the "head-rig". In the foreground rough cut lumber is being moved along by chains seen in open grooves in the surface of the platform. (Fortune Magazine, April 1934)
For I.W. Johnson Engineering Company. An interior view of a sawmill near Packwood, Washington. The "head-rig" is seen in the upper, center right. On the far left a radial-arm saw can be seen cutting lumber to length.
For I.W. Johnson Engineering Company. An interior view of a sawmill near Packwood, Washington. A log, with one side already sawed off having passed through the "head-rig" of the mill, has been rotated to slice off the opposite side. Once a log had been squared it was milled into lumber.
For I.W. Johnson Engineering Company. An interior view of a sawmill near Packwood, Washington. The "head-rig", where large logs are "squared" prior to being broken down into lumber, is seen on the right. Chain, similar to that used on bicycles, is being pulled by gears. Because it has teeth on the edges, the chain is able to move lumber through the mill. (Fortune Magazine, April 1934)
Douglas Fir Plywood Association. An exterior view of a building. Automobiles and a truck from the A.J. Johnson & Company are parked outside. The Tacoma skyline is in the distance.
Cascade Pole Co. manufactured poles and posts using Tacoma lumber. They manufactured their own creosote, and pressure creosoted their products for longer durability. Victor C. Monahan was President and J. R. McFarland was the Vice-President. Exterior view of Cascade Pole Co., a pole is being shaped using this machine.
Logs; Lumber--Tacoma; Lumber industry--Tacoma--1940-1950; Machinery; Cascade Pole Co. (Tacoma);
Cascade Pole Co. manufactured poles and posts using Tacoma lumber. They manufactured their own creosote, and pressure creosoted their products for longer durability. Victor C. Monahan was President and J. R. McFarland was the Vice-President. Exterior view of Cascade Pole Co., logs are being brought into the plant by the railroad car.
ca. 1946. The unveiling of the giant cross section of a tree trunk at the Northwest Door Company. The Northwest Door Co. plywood and veneer plant was founded in 1935. In the summer of 1946, the company logged a gigantic old growth Douglas Fir on their logging property southwest of Mt. Rainier. The tree was almost 14 feet in diameter. A cross section of the trunk was removed and sent to the Tacoma plant for display. Here the section is covered by a curtain prior to its unveiling. The cross section of fir was moved in 1965 to the Lakewood branch of the Pierce County Library system. See image #3 for the unveiling.
Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950;
ca. 1946. A section of Douglas Fir tree trunk almost 14 feet in diameter arrives at the Northwest Door Co. plywood plant. Anthony A. "Spike" Maras perches on top of the trunk, which is marked with a white 14 and sits on a logging truck. The "14" is the measurement of the diameter of the tree. On the ground, Fred R. Davis, left, and Percy J. Maras crane their necks to see the top of the trunk. The men are the owners of the Davis & Maras Co., which was hired by Northwest Door to fell the tree. The giant trunk will not be made into plywood, but will be put on display. (identification supplied by Anthony "Spike" Maras)
Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950; Logging trucks--1940-1950; Maras, Anthony A.; Davis, Fred R.; Maras, Percy J.;
ca. 1946. The unveiling of the giant cross section of a tree trunk at the Northwest Door Company. In the summer of 1946, Northwest Door Co. cut down this tremendous old growth Douglas Fir tree southwest of Mt. Rainier. They shipped a cross section of the stump to their Tacoma plant. The tree was almost 14 feet in diameter. The small signs on either side of the section of tree show what years each ring represents and events that occurred that year. A crowd turned out in the rain to watch the unveiling of the log. The cross section of fir was moved in 1965 to the Lakewood branch of the Pierce County Library system.
Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950;
ca. 1946. A section of Douglas Fir tree trunk almost 14 feet in diameter arrives at the Northwest Door Co. plywood plant. Marilyn Maras (now Cade,) daughter of Anthony "Spike" Maras, peeks from the top of the trunk, showing by comparison the huge size of the log. The log was cut by the Davis & Maras Co. from the Northwest Door Co.'s logging lands southwest of Mt. Rainier. A section of the log remained on display at Northwest Door from 1946 - 1965, when it was moved to the Lakewood branch of the Pierce County library.
Logs; Lumber industry--Tacoma--1940-1950; Northwest Door Co., Inc. (Tacoma); Tree stumps--Tacoma--1940-1950; Logging trucks--1940-1950; Maras, Marilyn;
Cavanaugh Lumber was owned by Cecil Cavanaugh. In 1931 they had a fire that destroyed most of their plant and a significant amount of their stock. They were able to rebuild and expand their business. View of unidentified man from Cavanaugh Lumber unloading plywood using a tool that measures the width of plywood, from company truck, photo ordered by Douglas Fir Plywood Association.
Plywood; Lumber industry--Tacoma--1940-1950; Trucks--Tacoma--1940-1950; Cavanaugh Lumber Co. (Tacoma); Douglas Fir Plywood Association (Tacoma);
In February of 1947, the Tacoma Ice Palace at 3801 South Union Avenue was being prepared for a boxing bout. Plywood flooring was placed over the Ice Palace's skating rink. A boxing ring and a heating system with 12 large blowers was brought in. The main event, organized by Raleigh Sliger, was between the Canadian welterweight Hal Robbins and Chuck "Kid" Brown from Klamath Falls, Oregon. View of plywood floor being placed over Tacoma Ice Palace's skating rink, photo ordered by Douglas Fir Plywood Association. (T. Times, 2/10/47, p. 10).
Plywood; Douglas Fir Plywood Association (Tacoma); Floors--Tacoma; Ice skating rinks--Tacoma; Tacoma Ice Palace (Tacoma); Boxing--Tacoma;
Rucker Brothers trucking company was owned by Burrell and Murrell Rucker, they were located on 733 East 11th Street, on the same site as the St. Paul and Tacoma Retail Lumberyard. View of Rucker Brothers truck loaded with lumber, St. Paul and Tacoma Lumberyard in background. St. Paul and Tacoma lumber was shipped throughout Washington in Rucker trucks.
Lumberyards--Tacoma; Lumber industry--Tacoma--1940-1950; Shipping--Tacoma; St. Paul & Tacoma Lumber Co. (Tacoma); Rucker Brothers (Tacoma); Trucks--Tacoma--1940-1950; International trucks;
Cheney Lumber Mills could be found throughout Washington, Oregon and California. The Tacoma plant had a sawmill, dry kiln, planning mill, log sorting area, storage facilities and loading areas. This plant employed approximately forty people. Exterior view of Cheney plant, laborers appear to be stacking and moving studs by using equipment.
Loading a shipment of lumber from Cheney Lumber Company was made easier by the Cheney's facilities and dock on Sitcum Waterway. Cranes could load directly from railroad cars that had tracks on the dock. TPL-5676
Cheney Lumber Co. was founded by Ben B. Cheney. Ben Cheney, although a well respected lumberman and a pioneer in his field, is also known for his interest in sports. The Cheney Stud teams participated in baseball, football, soccer and basketball. Ben Cheney was instrumental in bringing the Pacific Coast Baseball League to Tacoma and the Tacoma Cheney Stadium was named in his honor. A view of Cheney Lumber stacked on the dock ready for loading into a ship tied-up at the company dock.
The Cheney Stud brand carries a stud horse imprinted on the ends and faces of Cheney Studs, it quickly became recognized throughout the industry as a sign of top quality. The demand for eight foot Cheney Studs dramatically increased while the availability of suitable tie lumber for the portable mills and the market for railroad ties decreased. Exterior view of Cheney plant, Cheney Studs are stacked up, hoisting machinery is in center.
Cheney Lumber Co. was a modern stud mill, providing Tacoma and national industries with the building material most needed. Cheney had been at their current site since 1942, they were located on the west side of Port of Tacoma Road, north of East 11th Street. Exterior view of pier with studs, laborers and hoisting pulleys and equipment.
Loading a shipment of lumber from Cheney Lumber Company was made easier by the Cheney's facilities and dock on Sitcum Waterway. Cranes could load directly from railroad cars with tracks on the dock. TPL-5677
Ben B. Cheney founded Cheney Lumber Co. in 1936. The Cheney Co. was originally established to manufacture railroad ties. Timber was purchased and resold to small portable tie mills manufacturing ties for both domestic and foreign markets. Cheney eventually set out to strategically redevelop the 12 foot stud, prices would drop and less lumber would be wasted, making the 8 foot stud quite popular. Exterior view of Cheney plant, lumberyard and docks.
Ben B. Cheney, Cheney Lumber Company and Cheney Stadium are all important components in Tacoma's history. Exterior view of Cheney Lumber, train tracks and the Port of Tacoma gave this company easy access, which allowed them to receive the timber and ship their products. Laborers are working with the thousands of studs stacked up throughout the plant. TPL-8056
Douglas Fir Plywood Association. Testing plywood for resistance to pressure. One worker manipulates the machinery while another keeps record of the test results. Severs laboratory tests to which fir plywood was constantly subjected assured consumers of consistent high-quality materials. The standards not only set forth grades and types but also consistent testing procedures. (T.Times, 2/25/1949)
Plywood Research Foundation (Tacoma); Plywood; Lumber industry--Tacoma--1940-1950; Laboratories--Tacoma--1940-1950;
Douglas Fir Plywood Association. Testing plywood at the plywood lab. One of the standards demanded that the adhesives, after setting, be stronger than the wood. The research projects were not only intended to answer today's questions but also future applications. Other studies included industrial and agricultural applications. (TNT, 2/17/1948, p.3-B)
Plywood Research Foundation (Tacoma); Plywood; Lumber industry--Tacoma--1940-1950; Laboratories--Tacoma--1940-1950;
Ladd Logging Company. Several very large logs float in a log pond. In October 1948 Ladd Logging Company was known to have been cutting logs from the Kosmos section of east Lewis County along with other logging companies. The logs were brought to Tacoma's harbor dumps and storage spaces by rail. When needed they were rafted together and taken to saw or pulp mills. Large numbers of logs were cut and dumped in log ponds against the approaching winter slowdown in the woods. (T.Times, 2/26/1941; Ledger 11/10/1946)
Plywood Research Foundation. Testing plywood with a high flame at the plywood lab. A worker is keeping record of the test results. The Plywood Research Foundation was opened in August 1944 and was funded with an initial $100,000 from subscribers from the plywood manufacturers. A separate corporation was formed. Among the explorations at the lab were overlay and surfacing treatments for plywood, studies of built-up plywood beams and other structural applications, tests of preservative treatments and water repellants. (TNT, 5/24/1944)
Plywood Research Foundation (Tacoma); Plywood; Lumber industry--Tacoma--1940-1950; Laboratories--Tacoma--1940-1950;
Douglas Fir Plywood Association. Four men stand by one of the displays at the one-day convention of the Douglas Fir Plywood Association showing some of the post-war requirements of the plywood industry. Among the displays at the convention were samples made by the Plywood Research Foundation showing new uses and new products from plywood. (T.Times, 6/11/1947, p.1)
Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;
Douglas Fir Plywood Association. Two men stand by a display for K-Veneer and its uses. Numerous new plywood products were exhibited such as surfacings for panels and combination products, some manufactured from sawdust and other substances previously considered waste. (T.Times, 6/11/1947, p.1)
Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;
Douglas Fir Plywood Association. Four men stand by one of the display boards at the DFPA conference referring to the advertising done by the association on behalf of the plywood industry. All 33 of the Douglas Fir plywood factories in the western parts of Oregon and Washington were then participants in the plywood industry's quality control program. (T.Times, 6/11/1947, p.1)
Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;
Douglas Fir Plywood Association. Four men have gathered to look at a display board of process samples at the one-day conference of the Douglas Fir Plywood Association held June 10, 1946, at the Elks Temple auditorium. Some 150 leaders of the plywood industry were assembled at this conference. (T.Times, 6/11/1947, p.1)
Douglas Fir Plywood Association (Tacoma); Lumber industry--Tacoma--1940-1950; Meetings--Tacoma--1940-1950;
