ca. 1956. Timber industry scenes from Grays Harbor and the Olympic Peninsula, ordered by Malcolm McGhie. Two hard hatted workers from Rayonier Inc. stand in an old growth forest. This photograph really shows the size of these enormous trees, the loggers appear tiny next to them. This stand of hemlock is approximately 80 years old. The trees are 110 - 125 feet high and average 24 inches in diameter. This track was recently thinned to promote growth of the best trees. Rayonier and its Canadian subsidiary Alaska Pine produced chemical cellulose, pulp, paper and lumber. They were also experimenting in developing new products called "silvichemicals" from the by products of cellulose manufacture. (Rayonier's annual report for 1956)
Lumber industry--Grays Harbor--1950-1960; Trees; Logs; Rayonier, Inc. (Grays Harbor);
ca. 1956. Portrait of a timber worker in a hard hat bearing the green cross safety logo. Photograph was taken on Rayonier Grays Harbor timber lands and ordered by Malcolm McGhie. Timber and forests fueled the economy of the Olympic Peninsula.
Lumber industry--Grays Harbor--1950-1960; Trees; Logs; Rayonier, Inc. (Grays Harbor);
ca. 1956. Alaska Pine, sawmill plant at New Westminster, B.C. During 1956, Alaska Pine set up a new high speed production line, part of which is shown here, for processing western red cedar bevelled siding. The sawmills at the Marpole and New Westminster Divisions produced a variety of products for wholesale markets in the United States and Canada. The products included hemlock and Douglas fir two-inch dimension lumber, sheathing and boards, cedar siding and shingles and industrial grades for such uses as garage doors, ladders and millwork. Alaska Pine was a leading promoter of the use of cedar, especially as siding. (Rayonier's annual report for 1956)
ca. 1956. Alaska Pine, Marpole Division sawmill plant, Vancouver B.C. Semi-finished hemlock lumber waits on kiln-cars to roll into the dry kilns. Alaska Pine was a pioneer in kiln drying of hemlock and developing it as a commercial product. The company kiln-dries about 60% of its lumber output, including practically all of the hemlock products. Properly dried hemlock makes excellent construction lumber. This stimulated broader use of a timber still abundant in the fifties. The company was also promoting the use of cedar, particularly as siding. (Rayonier's annual report for 1956)
ca. 1956. Alaska Pine, Marpole Division sawmill plant, Vancouver B.C. Big logs are brought to the mill in large rafts towed from the company's logging operations hundreds of miles away. They are cut into 20 foot lengths in the water and pushed onto the loghaul, which carries them into the mill. (Rayonier's annual report for 1956)
ca. 1956. Alaska Pine, Rayflo plant at Marpole. Two men stand on the scaffolding erected around the tank being constructed for Alaska Pine's new plant in Vancouver, B.C. The plant will produce rayflo, a chemical manufactured from Hemlock byproducts and used in the production of oil well drilling mud. Alaska Pine was the subsidiary of Rayonier Inc. and one of the largest timber concerns on the west coast. (Rayonier's annual report for 1956)
Lumber industry--British Columbia--1950-1960; Trees; Logs; Chemical industry--British Columbia--1950-1960; Alaska Pine & Cellulose Limited (Vancouver B.C.);
ca. 1956. Timber industry scenes from Grays Harbor and the Olympic Peninsula, ordered by Malcolm McGhie. A log train chugs along on the Rayonier owned main line railroad in Washington. The locomotive is one of two new diesel-electric locomotives put in service in 1956, replacing steam. While the two main lines were being improved, spur railroad tracks were being replaced by company owned truck roads. By May of 1957, the conversion to truck logging would be complete. (Rayonier annual report for 1956)
ca. 1956. Timber industry scenes from Grays Harbor and the Olympic Peninsula, ordered by Malcolm McGhie. A locomotive owned by Rayonier Inc. hauls logs across a railroad trestle; carrying them to a mill or paper plant for processing. In 1956, Rayonier was replacing the spur railroad lines with private truck roads that led to two company owned main logging railroads. Funds were spent to improve the main tracks, trestles and replace the steam locomotives with new diesel-electric ones. By May 1957, it was projected that the conversion to truck logging would be complete. This shows a Rayonier Baldwin diesel putting a logging train across the Hoko River Bridge on the Olympic Peninsula. (Rayonier annual report for 1956)
Interior views of Anacortes hardboard plant. An Anacortes Veneer, Inc., worker appears almost dwarfed by the enormous machinery before him as he inspects gauges in the plywood plant on December 29, 1955. Anacortes Veneer was only the second worker-owned venture in the industry, following the example of Olympia Veneer. More workers would become owners in the near future. Photograph ordered by Douglas Fir Plywood Association.
Machinery; Lumber industry--Anacortes; Anacortes Veneer, Inc. (Anacortes); Douglas Fir Plywood Association (Tacoma);
Interiors hardboard plant in Anacortes. Sheets of veneer are stacked upright at the Anacortes Veneer plant on December 29, 1955. The plywood on carts would then be easily transported via tracks. Anacortes Veneer was the second worker-owned in the lumber industry, after Olympia Veneer in 1927, and after much trial and tribulation, peeled its first log on November 27, 1939. Photograph ordered by Douglas Fir Plywood Association. (Cour: The Plywood Age, p. 123-127)
Plywood; Lumber industry--Anacortes; Anacortes Veneer, Inc. (Anacortes); Douglas Fir Plywood Association (Tacoma);
An employee of the Anacortes Veneer, Inc., plant seems to have the responsibility of monitoring the gauges on the large piece of machinery. He may have to report his findings on the piece of paper in front of him. It is possible that this giant machine might be a hot press; the heat and pressure would seal in adhesive, making the plywood panels tougher and perhaps waterproof. The plywood then could be used for the exteriors of boats and other outdoor usage. Photograph ordered by Douglas Fir Plywood Association.
Machinery; Lumber industry--Anacortes; Anacortes Veneer, Inc. (Anacortes); Douglas Fir Plywood Association (Tacoma);
Interior of veneer plant. One man is all that is apparently needed to monitor operations at this stage of manufacturing at the Anacortes Veneer, Inc., plywood plant in December, 1955. Anacortes Veneer was one of the first co-ops in the industry as it first commenced operations in 1939. Charles Carlson was elected president on April 8, 1939. Photograph ordered by Douglas Fir Plywood Association.
Machinery; Plywood; Lumber industry--Anacortes; Anacortes Veneer, Inc. (Anacortes); Douglas Fir Plywood Association (Tacoma);
Exterior Cheney Lumber. Neatly stacked piles of logs are separated from sections of plywood by railroad tracks at the Cheney Lumber Co. lumberyard at the Port of Tacoma. The Cheney Lumber Co. was owned and operated by Ben Cheney. Founded in 1936, the company was established originally to manufacture railroad ties. Cheney developed the 8' Cheney Studs which were heavily in demand in the building industry. His logo of a horse was stamped on each stud produced. Photograph ordered by Cheney Lumber Co.
Cheney Lumber Co. Midget Baseball League. Summer was baseball time and the Metropolitan Parks offered many leagues based on the age of the players. Each team had a commercial sponsor and many of the different age teams bore the name of Tacoma philanthropist and sports enthusiast Ben Cheney. Ben Cheney made it possible for athletes of many different ages to experience the joys of competitive sports.
Circus trucks used to transport the travelling exhibit "Fir Plywood Golden Jubilee Show." Photo series ordered by the Douglas Fir Plywood Association. 1955 marked the 50th anniversary of the plywood industry. As part of the year long celebration, the travelling display toured the West Coast regions where plywood was manufactured. The free show included something for everyone. It featured a plywood menagerie, a color movie showing how plywood is manufactured and some new ideas for modern living, "Fifty Golden Ideas" by prominent designers. (TNT 7/19/1955, pg. C-17)
A model of a plywood mill, part of the travelling exhibition "Fir Plywood Golden Jubilee Show." 1955 marked the fiftieth anniversary of the creation of the first plywood panel. As part of the celebration, a mobile exhibit toured the West Coast regions where plywood is manufactured. This model recreation of a plywood mill was part of the show. In the model, cutting and barking of the log is shown as well as the peeling of the log. The wood is cut into lengths and placed in the drying racks to dry. In the rear, the lengths are having glue applied in preparation to being laid in plys to form the multi-layer plywood. The panels are then heated to form a solid bond.
Advertising set up for plywood, the building material of 1,000 uses. Photograph ordered by the Condon Co. for an ad in Life magazine for the Douglas Fir Plywood Association. The year of 1955 marked the fiftieth anniversary of the invention of plywood panels. The DFPA used this opportunity to further promote their product. Plywood is shown being used left to right as woodworking materials, in flooring, as furniture, in boats, as house siding, playground building materials, a doghouse for a real pig and in traffic signs. This surrealistic overview would be sure to catch the readers eye in the magazine.
Plywood; Douglas Fir Plywood Association (Tacoma)--Products;
Two blonde models and a casually attired unidentified man pose on the barrier around the Douglas Fir Plywood Association's Plywood Memorial at the Forestry Building in Portland, Oregon. On display is the first plywood panel ever made from Douglas Fir. Early in 1905, Portland was getting ready for a World's Fair as part of the centennial observance of the Lewis and Clark Expedition. Portland Manufacturing Co. was asked to prepare an exhibit featuring something new and unusual. N.J. Bailey and Gustav Carlson and a crew of about six men constructed by trial and error the first plywood panels. This was the birth of the plywood industry that became one of the backbones of the economy of the Pacific Northwest. ("The Plywood Age" by Robert M. Cour)
Plywood; Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland--1950-1960;
The Douglas Fir Plywood Association's Plywood Memorial at the Forestry Building in Portland, Oregon. On display is the first plywood panel ever made from Douglas Fir. It was produced by the Portland Manufacturing Company for display at the Lewis and Clark International Exposition in Portland in 1905. Its production marked the birth of an industry that fueled the economy and development of the Pacific Northwest. The unveiling of the memorial was one of the highlights of the DFPA's Golden Jubilee, June 19-21, 1955, held in Portland.
Plywood; Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland--1950-1960;
Wallace E. (W.E.) Difford, managing director, addresses the Douglas Fir Plywood Association's (DFPA) annual meeting. The Golden Jubilee Convention was held in Portland, Oregon, June 19-21, 1955; celebrating 50 years of the plywood industry from its inception in 1905 to 1955. Difford advised the group of the need for research and product improvement to fuel industry growth. He also warned that the future of industry management depended on talented young people being advanced on the career path, not shuttled into dead end jobs. Difford was selected at the meeting as one of the top 3 plywood salesmen in the industry's history. The highlights of the Jubilee were a Broadway type musical pageant, the presentation of Arlene Francis's televised "Home Show" and the unveiling of a giant exposition containing 50 golden ideas designed by 5 nationally leading architects.
Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland; Plywood; Difford, Wallace E.;
The Douglas Fir Plywood Association's (DFPA) annual meeting in 1955. The Golden Jubilee Convention was held in Portland, Oregon, celebrating 50 years of the plywood industry from its inception in 1905 to 1955. Over 12,000 plywood manufacturers and distributers attended the meeting. One of the highlights was the unveiling of the Plywood Memorial at the Forestry building in Portland. The Memorial was designed around the original sheet of plywood manufactured in 1905 for display at the Lewis and Clark International Exposition in Portland.
Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland; Plywood;
Douglas Fir Plywood Association's (DFPA) annual meeting. The Golden Jubilee Convention was held in Portland, Oregon June 19-21, 1955, celebrating 50 years of the plywood industry from its inception in 1905 to 1955. One of the highlights was the unveiling of an exposition. This appears to be the wives of delegates posing at the entrance of the exhibit hall.
Douglas Fir Plywood Association (Portland); Exhibition buildings--Portland; Exhibitions--Portland; Plywood;
Plywood displays for the Douglas Fir Plywood Association. The word "Moke' " has been carved into a piece of fir plywood. The final swoop of the "M" has been lifted up to give a 3D effect. Moke panels were popular in the 1950s as backdrops in department store window displays and as decorative art in homes. For the same carving illuminated from the back, see image #7. (Additional information provided by a reader)
Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;
Plywood displays for the Douglas Fir Plywood Association. A design has been cut into fir plywood with a saw. Dowel rods hold some portions of the design raised from the main board; other portions are bent back from the main design. The end result is a 3D look. A wooden finished knob in the center also lends a dimensional feel.
Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;
Plywood displays for the Douglas Fir Plywood Association. A design has been cut into fir plywood with a saw. The design is raised in some places and bent the other direction in others. The design has been illuminated from behind, accenting the detail. For the same design without the backlighting, see image #51.
Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;
Plywood displays for the Douglas Fir Plywood Association. A cabinet is viewed from above topped with an assortment of power tools, hand tools and plywood trim pieces. These are the materials and tools used in a woolworking display captured in this photographic series (D89928.) This cabinet would be perfect for the home handyman to store his tools and small materials or for the hardware store to shelve small items. The DFPA, located in the Fuller building in Tacoma, was constantly promoting its product and its myriad uses. The plywood industry exploded in the Northwest thanks to this dedicated self promotion.
Plywood; Douglas Fir Plywood Association (Tacoma); Drills (Equipment); Hammers; Woodworking--Tacoma;
Plywood displays for the Douglas Fir Plywood Association. A man does detailed and intricate cutting with a skill saw. A completed decorative woodwork piece can be seen in the background.
Plywood; Douglas Fir Plywood Association (Tacoma); Saws; Woodworking--Tacoma;
Plywood displays for the Douglas Fir Plywood Association. A man poses with decorative woodwork pieces cut from fir plywood. The wood has been cut in intricate patterns with a skill saw. Dowel rods have then been inserted to hold some of the pieces out from the main piece, giving the design a 3D look.
Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;
Plywood displays for the Douglas Fir Plywood Association. In this photograph, a piece of 3D woodworking has been backlighted. The result looks almost like neon.
Plywood; Douglas Fir Plywood Association (Tacoma); Woodworking--Tacoma;
St. Paul & Tacoma Lumber Company. Photos featuring "quality control" of hemlock at St. Paul. A man in a hard hat operates controls for the lumber processing machinery at St. Paul & Tacoma. He watches the gauge to the right as he moves the controls.
Lumber industry--Tacoma--1950-1960; St. Paul & Tacoma Lumber Co. (Tacoma);
