Architectural office of Star Iron & Steel Co. Men are shown working at desks with architectural plans spread out. One large table in the foreground has an architectural blueprint held down by a book of standards and notepad. Star Iron's new one-story office building was separated from the 100,000 square foot plant to reduce noice level. Star Iron had been in the Tacoma area for decades and was one of the oldest steel fabricating firms in the Pacific Northwest. They built cranes and specialized equipment to handle everything from salmon to missiles. Crane capacities ranged to more than 350 tons. Besides cranes, the company made radio, tv, and power transmission towers, steel for buildings and bridges, and equipment for the lumber industry including log barkers, hydraulic presses, power operated grapples and chip handling buckets. Photograph ordered by Bethlehem Pacific Coast Steel. (TNT 9-1-61, B-10, TNT 7-24-63, A-11)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Offices--Tacoma--1960-1970; Blueprints; Books;

Close-up of the bridge end trucks of the 275-ton powerhouse crane built by the Star Iron & Steel Co. of Tacoma for the Barkley Power Plant on Kentucky's Cumberland River. This July 15, 1963 photograph is a cropped view of A-138737-3, and was taken for a government report.

Star Iron & Steel Co. (Tacoma);

An employee of Ace Furnace & Steel Co. leans one arm against a massive steel jet propulsion fuel storage tank on company property on August 5, 1958. He appears diminutive when contrasted with the 10.6 foot diameter tank. The gas tank measures 77.5 feet in length. Ace Furnace produced steel storage tanks for oil, gasoline and water, stacks, marquees, canopies, steel heating and ventilation systems, boilers, furnaces, and marine sheet metal. The company's major output now are tanks of all sizes, approximately 400-800 tanks per month. The huge tanks pictured above were just built for McChord Air Force Base. It is estimated that these were the largest shop fabricated steel tanks ever built in Tacoma. The Northern Pacific cars in the background would make transportation of these heavy steel products easier and more efficient. Photograph ordered by Ace Furnace & Steel Co. (TNT 9-1-58, C-7)

Ace Furnace & Steel Co. (Tacoma); Steel industry--Tacoma; Storage tanks--Tacoma; Railroad freight cars--Tacoma--1950-1960;

Interior of Star Iron & Steel plant. Elevated view on May 1, 1963, of interior of the Star Iron & Steel plant shows fabricated steel products ready to be assembled. Star Iron, well-known for crane construction, also made towers, hydraulic presses, power operated grapples, and fabricated steel for buildings, bridges and grandstands. They had built a larger plant on Alexander Avenue in 1963.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970;

An enormous Brute Crane manufactured by the Star Iron & Steel Co. of Tacoma balances both men on board and heavy loads of plywood in this customer print copied in September, 1963. The presence of other piles of plywood near the building under construction seem to indicate that the Brute Crane has already been put to good use. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Hoisting machinery; Plywood; Building construction;

ca. 1971. 1971 Richards color stock footage. A familiar landmark in Tacoma was the imposing smokestack at the ASARCO smelter. It rose over 500 feet at the smelter located near Point Defiance. The smokestack, dubbed the tallest in the world at the time of its 1917 construction, would be demolished on January 17, 1993.

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma--1970-1980; Smokestacks--Tacoma; Industrial facilities--Tacoma;

Overhead view of trolley assembly at Star Iron & Steel. Trolley No. 1 and No. 2 are being assembled for the Webbers Fall Lock & Dam Crane on February 28, 1969. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

A small convoy of trucks prepares to leave Star Iron & Steel, 326 Alexander Ave., loaded with manufactured products on March 13, 1968. Star Iron was well known for its crane production and other heavy duty equipment. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Trucks--Tacoma--1960-1970; Steel industry--Tacoma--1960-1970;

Crane under construction at Star Iron & Steel Co. The Star Iron & Steel plant was located in new quarters at 326 Alexander Ave. in the Port Industrial area. Custom designing and manufacturing special equipment, cranes, and hoists was its primary business. During July, 1964, gantry cranes weighing 50 and 350 tons were being manufactured by Star Iron & Steel. Gantry cranes were similar to overhead bridge cranes except that the bridge for carrying the trolly or trolleys was rigidly supported on two or more legs running on fixed rails or other runway. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Industrial facilities--Tacoma--1960-1970; Hoisting machinery;

Scenes from the steel industry. By 1969, Star Iron & Steel had been in their Port Industrial location for six years. The larger facility at 326 Alexander Ave. made it possible for the company to increase payroll and accept more jobs. One of the projects in February of 1969 was to build winch components for Everett Alumina Crane. Photograph ordered by Star Iron & Steel.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

Scenes from Star Iron & Steel. Star Iron & Steel was one of the northwest's oldest steel fabricating firms. It was well known for the quality of its cranes, especially the heavy duty cranes manufactured for the Navy during WWII. In February of 1969, one of its projects was to manufacture winch components for the Everett Alumina Crane. Photograph ordered by Star Iron & Steel Co.

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1960-1970; Hoisting machinery;

Star Iron & Steel operations. A Star Iron & Steel employee in overalls and gloves is shown operating an unidentified machine at the company plant in March of 1971. Star Iron & Steel was a longtime Tacoma firm with origins in the 1920s. Cranes, hoists and special machinery made up 70% of Star Iron & Steel's annual volume. The company also specialized in fabricated steel and aluminum. Photograph ordered by Star Iron & Steel. (TNT 12-13-70, C-21 - article)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1970-1980; Machinery;

Workers are preparing to move a floating bulkhead in early February of 1971 from its construction site at 326 Alexander Ave. to the Port of Tacoma waterfront. It appears that rubber segments are being laid to help with traction. The bulkhead was manufactured by Star Iron & Steel Co. for the U.S. Corps of Engineers. It would be towed by tugboat down the coast and up the Columbia River to a dam on the Snake River. Photograph ordered by Star Iron & Steel Co. (TNT 2-6-71, p. 21- article)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1970-1980; Retaining walls--Tacoma;

A worker makes one final check before the heavy-duty Northwest Hauling Co. truck departs from Star Iron & Steel's tideflats location on February 3, 1971, with a floating bulkhead in tow. After a stop at the Port of Tacoma, the bulkhead would be towed by tug to its final destination at the Little Goose Lock & Dam on the Snake River. Although Star Iron & Steel was perhaps best known for its manufacture of cranes and hoists, it also accepted other contracts; this $165,000 contract was from the U.S. Corps of Engineers. Photograph ordered by Star Iron & Steel Co. (TNT 2-6-71, p. 21- article)

Star Iron & Steel Co. (Tacoma); Steel industry--Tacoma--1970-1980; Retaining walls--Tacoma; Trucks--Tacoma--1970-1980;

ca. 1900. This is a copy of an early photograph of the Atlas Foundry & Machine Co., originally taken circa 1900. The copy was made in 1978. Atlas Foundry (since renamed Atlas Castings & Technology) was established in 1899 as a manufacturer of iron castings. Steel and brass were later added to its catalog of moldable metals. Its sprawling complex is still located between Center St. and South Tacoma Way.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1900-1910;

Groundbreaking for Atlas Foundry's $5,000,000 expansion and modernization project occurred on February 23, 1978. Standing with his foot on a shovel is company president Leo H. Long, Sr. Among those attending the ceremony were Milo S. Gates and Chuck Fausel (flanking Mr. Long). Founded in 1899, the company is now known as Atlas Castings & Technology. Photograph ordered by Atlas Foundry. (TNT 2-24-78, C-12-article on expansion)

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1970-1980; Steel industry--Tacoma--1970-1980; Ground breaking ceremonies--Tacoma--1970-1980; Shovels;

ca. 1925. ASARCO smokestack and NP tracks coming out of the Nelson Bennett Tunnel to the west of Point Defiance Park. Photograph was taken circa 1925. BU-13881

ca. 1893. Tacoma smelter. This photograph of the Tacoma Smelting & Refining Co. (previously named the Ryan Smelter) was taken for the New England Magazine and published in their February, 1893, issue. The smelter was owned by prominent businessman William R. Rust who had purchased it four years before. The smelter was originally built to produce lead but in a few short years, would become a major supplier of copper. A comparison of an earlier view of the smelter, taken circa 1888, now shows a completed pier on the right and an additional large building on the property. In 1905 the American Smelting & Refining Co. (ASARCO) bought the company and it remained an important part of Tacoma's economy until its closure in 1985. (New England Magazine - February, 1893 p.800) (See Rutter, image 01, for view of smelter circa 1888)

American Smelting & Refining Co. (Tacoma); Smelters--Tacoma; Industrial facilities--Tacoma;

Damaged negative showning view of American Smelting & Refining Co. (ASARCO) looking toward Tacoma.

Smelters--Tacoma; American Smelting & Refining Co. (Tacoma);

Steel plate girder manufactured by Star Iron & Steel for the Masonic Temple at 47 Saint Helens Ave, Tacoma.

Industries; Star Iron & Steel; Construction; Masonic Temple;

Pierce County Airport, Lakewiew (now Lakewood) Wa. Steel hangar designed and developed by Star Iron & Steel.

Industries; Star Iron & Steel; Airports; Construction;

Machinery at Star Iron & Steel foundry at 435 E 11th St, Tacoma

Industries; Star Iron & Steel; Machinery; Tideflats;

Views of Atlas Foundry and Machine Company. The foundry was established in 1899.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs;

This aerial view of the Atlas Foundry and Machine Company (now Atlas Casting and Technology) at 3012 So. Wilkeson St. dates from July 1941. The Atlas building, near the center, is located between Center Street (at the left) and So. Tacoma Way. I-5 has yet to be built on the ridge of open land at the far right. [Also dated 08-26-1941]

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Aerial photographs;

Atlas Foundry, interior. Pouring of metal is pictured on February 12, 1941.

Atlas Foundry & Machine Co. (Tacoma); Foundries--Tacoma--1940-1950; Founding--Tacoma;

A smudge faced worker takes a lunch break during his shift at the Atlas Foundry. His lunch box and thermos are opened as he eats right beside the machine that he works on. During World War II, Tacoma's defense workers worked long hours and in shifts that ran around the clock. (T.Times 8/27/1941, pg. 23)

Atlas Foundry & Machine Co. (Tacoma); World War, 1939-1945--War work--Tacoma ;

Long view of the exterior of Pacific Iron and Steel Works at 1602 Canal St. (now Portland Ave.) The company manufactured heavy machinery for logging, hoisting and dredging. The foundry was built in 1914.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Pacific Iron & Steel Works, 1602 Canal St. (now Portland Ave.) An employee looks diminutive beside what may be a huge mold for steel castings.The foundry, built in 1914, also manufactured large machinery for logging and hoisting.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Pacific Iron & Steel Works, 1602 Canal St. (now Portland Ave.) An employee turns a wheel operating a large piece of machinery in the foundry.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma-- 1940-1950;

Foundry operations - Pacific Iron & Steel Works. Pacific Iron & Steel was housed in a two-story wood & sheet metal structure at 1602 Canal St. (now Portland Ave.) The company, founded in 1914, manufactured logging and hoisting machinery, steel castings and dredging machinery. A worker is pictured here on January 10, 1943, turning the wheel which operates the large machine before him.

Pacific Iron & Steel Works (Tacoma); Foundries--Tacoma--1940-1950; Steel industry--Tacoma--1940-1950;